Read a PDF via the Braille display

Similar Questions

• try to open a PDF via the BrowserFieldRequest APi url

  Hello

  I try to open a PDF of the following url >

  CFB BrowserFieldConfig = new BrowserFieldConfig();

  BrowserField bf = new BrowserField (config);

  BrowserFieldRequest res = new BrowserFieldRequest (PDF_URL);

  browserField.requestContent (bf);

  When I run the code on both the Simulator and the device I get

  Error message: unsupported media type.

  But if I try to open a PDF manaually on the device lets say Google.com it opens.

  The url of the pdf that I pass opens on your desktop.

  What else is required to open the PDF file from a java application.

  Thank you

  sgarg

  OK, it works with the device but not the reason of emulator is the BES server.

• Reader not to honor the Page display preferences

  Hello. I use Adobe Reader X on Win7 Ultimate (x 64).

  I put the following in Edit - Preferences - Page display:

  Layout: Single Page continuous

  Zoom: width

  Resolution: Use the system setting: (96 pixels/inch)

  However, no document open fit to width.

  I have experimented with different settings for the Page layout, Zoom and resolution, however, several times, a document not open to adapt to the width of the windows. What Miss me?

  Thank you.

  The documents you are viewing can have their own preferences of document in the way that they want to file to display. They will be honored by the reader. You can change the way you view the PDF files, but you cannot save your changes.

• Vostro 230 and E2210 via the DVI display won't wakeup

  Hello-

  Have a lot of new identical Vostro 230 systems with E2210 hung using DVI. They all show a weird problem - when the screen goes into sleep mode for energy savings (the sleep of the screen, not the PC, is disabled), intermittently, they wake up to the top. Systems are on but no video. Only way to recover the video is the hard reset. Several machines, same problem. As a test, used VGA and no problem of Awakening (so far).

  Obviously, something is wrong, I suspect with the car when using DVI video. Someone at - it information? Needless to say that we will not get over these until we have a resolution...

  Thank you...

  Braytonak,

  You can cancel your installation with your new materials because a technical analyst on Dell support have studied the issue we are having on the Vostro 230 trying to run two monitors with integrated vga Plug and add it into the DVI Jack.

  This is an unsupported configuration.  DVI expansion card is a pass-through and not a current graphics card.

  The matter has already been brought to INTEL because the problem is with the INTEL driver. Intel has said that they will not be correcting mistakes in any future driver versions.

  Currently, there are a number of available workarounds:

  Use VGA only

  also upgraded to the 8.15.10.1749 or 8.15.10.1872, some Googling Intel driver ==> it works fine for me on Windows 7 x 64

  For Windows XP it also seems to work very well ==> 6.14.10.5090

  You can also install a graphics card in addition also will solve. (e.g. Diamond ATI Radeon HD3450 PCI - E 512mg low profile)

• No 'Reader Extended PDF' option in the XI player

  I sent a document by a potential employer who must be digitally signed with a certificate.  When I try to use the sign, all to certificate options are unavailable.  Check the properties of the document, I see that the signature is not allowed.

  Check elsewhere in the forums, it seems that the answer for reader XI is re - save the document using 'file-> save as other-> Reader Extended PDF', however, the only options I see under 'Save as other' are 'Text' and 'Word or Excel online.

  So, how can I activate the signature for this document?  I'll also have to create a certificate for it.

  I run free reader XI on Windows 8.1.

  You need Adobe Acrobat for that.

• Digitally sign is gray in CD player unless the document has been saved with Reader Extended PDF - option activate more tools in Acrobat. Is the feature to sign without options Reader Extended broken or has it been removed?

  If we just save a PDF document, users with CD Player cannot sign because the option "digitally sign" in the upper part of the certificates bar is grayed out. According to other information that I read, the ability to sign with earlier versions of the player requires the PDF file to be registered as a Reader Extended PDF with the option enable the tools more. If I save the document in this way, our DC users can sign it. We took the latest version (2015.008.20082). This feature - the ability to fill/sign a regular document (no Reader Extended PDF) - has been removed in later versions, or is it a bug that was not shown or even fixed?

  You can use fill & sign on documents without the form fields.

• Read a PDF file without knowing the size of stream

  Hello

  while I am able to properly read a PDF file, the only way I can do it (in function
  on what I heard in the master PDF 1.7) is to go the end of the stream and
  start from here (section 7.5.5).

  But this requires the size of the stream to be known. While this is usually not a
  problem (since the flow is usually a simple file), I would like to make my
  a bit more generic and be able to manage any type of flow, as library
  as long as it is placed at the beginning of a PDF document.

  But unless I missed something of the form, when I'm dealing with a
  unknown flow (a person who could not yet be fully charged when I started
  reading, as an outlet), it is not how to do it. I mean, I could do it,
  but I don't would not be able to tell when I arrived at the end of the document. Not
  without some sort of length information (because I do not know where the stream)
  ends). I mean, where to stop? In a trailer? That works only if the
  document have never been updated.

  If, just after the header (%) PDF - he was a kind of meta-information on
  the size of the document (after all the updates, if any) I could move the stream to
  that post (wait for the data arriving, if necessary) and work my way of
  He (and from there, because I would like to know where the document ends). But since my
  understand, there is no way to retrieve such information.

  So, to sum up, in order to properly read a PDF document:
  -I always need to know the size of stream (which I might not be able to)
  -the data flow must end with the PDF data (which could be also not always true)

  Am I wrong?

  Unless the file has been established for "fast web view" (aka linearization - ISO 32000-1, Appendix F) Yes.

  BUT, if a file be linearized so that it can be better managed in flow (at least for some parts of the PDF file).  It is not supported to pure stream - which is not possible - but it will help.

• Windows xp user adobereader 9. How to print using Adobe PDF as the default printer?

  I am currently under win xp and 9.5.2 adobe reader. I'm unable to print on a website to doc because I'm suppost to use adobe pdf as printer by default, how can I do this?

  Hi Willies,

  Adobe Reader is a reader of PDF that can open and interact with all types of PDF content, including forms and multimedia. You can use Adobe Reader to print PDFS via the physical printer. You must install Adobe Acrobat in order to get the printer Adobe PDF installed on your computer.

  If you need more information on Adobe Acrobat, please follow the link below:

  http://www.Adobe.com/in/products/Acrobat/create-PDF-Creator.html

• X 1 carbon 20BS do not recognize the Mini Display Port

  Hello - I have recently acquired a Thinkpad X 1 carbon 20BS with a new installation of window 10. While I am able to connect to external monitors via HDMI, I was unable to do that via the Mini Display Port. Connection of a monitor to the Mini Display Port didn't do nothing - the monitor is not identified by Windows.

  So far, I have installed the drivers of:, but it did not help. Any help to find ways get the carbon X 1 to recognize the Mini Display Port will be really appreciated.

  Thank you in advance.

  Jake - Thanks a lot for the reply. Happy to report that I was able to get the mini DP to work and he recognizes the compatible monitors very well.

  I tried to find a solution to link the Thunderbolt display carbon, but unfortuantely it seems not to be a Thunderbolt controller that is compatible with the mini DP carbon.

• Out of memory while reading a PDF file

  When reading large PDFs in the Mid-document I get an out of memory error, and the document will no longer appear beyond this point.  I also have an internal error Acrobat on the same document.  I'm on Windows 7 64 bit with 32 MB of memory - should be enough.

  The document is likely to be corrupt. Contact the designer for a new copy.

• I downloaded the adobe reader software, and when I call a pdf file, the following text is displayed.

  I downloaded the adobe reader software on my computer and now when I call a pdf file a meassage seems I have to accept the terms.  How to get back to the agreement?

  Mac?
  Go to: Mac HD/Applications

  Double-click the reader app and accept the agreement.

  Windows?
  Go to: C/Program Files(x86) / Adobe / 11.0 / player

  Double-click the file eula.exe and accept the contract

• U2413, calibration solution Ultrasharp fails to connect to display via the USB port

  Dell U2413 SN: CN-0YCM0F-72872-48P-A81L REV A01 August 2014

  Try to run the ultrasharp Dell V1.5.3 on this monitor calibration solution, however, the software stops and displays "please connect the screen to your computer via a USB cable." I click the OK button after you have checked that the USB port on the computer is connected to the USB connection screen, but ultimately, this message appears:
  "Could not establish a connection to the screen. Please make sure that the USB cable is connected and try again. »

  Has tried this on two different computers, running Windows Pro 8.1. One was connected to the monitor cable HDMI to DVI (Thinkpad 10 via docking station), the other using the provided Dell Display Port printer for (Tablet Thinkpad X 230) mini display port cable.

  The USB ports on computers were connected the Dell supplied USB 3 cable to the monitor. Also tried this on a single computer by using a USB 2 port and a USB cable with the same result. The USB connections on the monitor seems to work ok when you plug a flash drive or the i1 Display Pro. Also, did a reset Monitor USB and verified that Windows has seen additional generic hubs when the USB Monitor is connected to the computer. There are 4 additional hubs when you use additional 2 usb hubs and USB 3 cable when using the USB 2 cable. In addition, power cycled the monitor several times (as recommended in the version that is known for this problem) without success.

  Before the attempt to make the calibration:
  A factory reset on the monitor.
  Ran the monitor self test and SUBMISSION. No problem found.
  Monitor purchased from Dell November 2014

  Same result with V1.5.7

  Any suggestions? Where should I go from here?

  I had success in the U2413 of profiling. I pulled out an old workhorse, a Thinkpad T43
  under Windows XP. Then installed the ultrasharp Dell V1.5.3 calibration solution and all
  updates available from Microsoft, but no other software - nothing of the Dell-supplied with
  the monitor. Used the DVI - connection DVI and USB 3 cable supplied with the monitor. The
  software Profiler has worked well with this configuration. When the program first took to the "Start
  Screen measure"(where the problem occurs already noted) Windows (message status bar)
  has reported that he accessed software Realtek 3.0. So I focused on research at the Realtek
  software on other systems.

  On the Thinkpad 10. There were two 1. "Realtek Card Reader" and 2. «Realtek USB 2.0 Card Reader» I have
  removed both and reinstalled the software Realtek for Dell monitor CD. Insert an SD card and
  a USB in the monitor and both were seen by Windows Explorer. There was also a Realtek USB
  3.0 card reader to showing in Manager devices under USB controllers. Using the connections between the T10 to monitor previously described the Profiler software, then ran normally.

  X 230 - I removed the "Realtek Card Reader" (V6.2.9600.30168) software and tried to start the
  Software Profiler and it does not at the same point as before. Then I installed the Realtek USB 2.0
  Software for the Dell card reader. However, there was still no Realtek USB 3.0 card reader
  display in the Manager of devices under USB controllers. Software Profiler is not like before. I then
  inserted an SD card in the monitor and the "Realtek USB Card Reader 3.0" appeared in the device
  Manager. Software Profiler, then ran normally.

  So now my two systems Windows 8.1 software profiling will not work if the 'Realtek USB 3.0 Card '.
  Reader"is not listed in Device Manager. To do this the software must be installed (for example
  starting from the Dell CD) AND an SD card must be inserted into the SD slot on the monitor. Remove the SD card
  Card and the device disappears and profiling software will not run. Insert an SD card and the
  Software Profiler works normally.

  How can I get the "Realtek USB 3.0 card reader ' to automatically load before running the Profiler software?

• Cannot open PDF files, even if Adobe reader is installed on the computer

  Original title: I can't read all the PDFs? Even if I downloaded Adobe reader?

  I am convinced that something is wrong with my computer, I can not open all PDFs as statements of account or anything. I downloaded the Adobe reader software and it is in my control panel installed programs? What is the problem with my computer? Can HWO I solve this problem?

  Try opening the PDF via Adobe Reader file menu, double-click on the PDF file instead. If it works, the problem is probably with the file association settings.

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Files not open Adobe reader (PDF) with the error "internal error...". »

  I have a desktop running windows 7 (64-bit) and adobe programs work very well in Administrator account until I added another user.  After you have added the user account standard adobe (reader, Flash Player) programs work fine on the standard account and not on the administrator account. It doesn't matter if I'm trying to use through a browser or not.

  I tried to fix the reader through Control Panel and reinstall without change.

  whenever I try to open a pdf file or access a web page with flash player content I get a
  error message "internal error."

  Original title: adobe "internal error."

  I tried the suggested methods and system restore did nothing to help me.  When I open a new adobe for the administrator account programs worked well.  I don't have to changing the profile settings immediately.

  Then by chance, I tried to access My Documents folder via the file of users instead of the desktop icon (I have had no problem with) and received the message that I don't have permission to access this file and I didn't have the right to change the security settings.  I checked the property settings and he showed that no user had possession, so I was able to change the property on my administrator account. Still not sure how this happened, oh well.

  That fixed my problem with adobe, and all works well. Now, I can remove the second administrator account.

  Thank you for your help.

• Read Pdf in the application

  Hi all

  I have to read a pdf file that will be packaged in my cod. I have no idea how search in the forum, but nothing I do that.i have found useful.

  can someone help me with a code example for reading pdf files in the blackberry application

  Thank you

  Vishal

  You can use BlackberryInternetService to open a pdf file, it will display PDFs in the browser... .for that you can store on server pdf & browse pdf link... But need to install BlackberryInternetService on the device, as it will display the pdf only on device not on Simulator