Read a string as the name of a table

Similar Questions

• How to pass a string as the name of MovieClip?

  Hello world! I'm back with more doubts

  I created 4 buttons with 4 animations each, one for each State (using interpolations), so I have this list of 16 "addEventListeners" enourmous (do not know if there is another way to do it). But everything works as I want.

  The problem is that I am creating only 4 functions for dealing with all 4 keys and these 16 eventListeners.

  This is part of my file AS3 (always with the ' traces', 5 seconds of the animation to see animations and all).

  empresa_btn.addEventListener(MouseEvent.MOUSE_OVER, isOver);
  empresa_btn.addEventListener(MouseEvent.MOUSE_OUT, isOut);
  empresa_btn.addEventListener(MouseEvent.MOUSE_DOWN, isDown);
  empresa_btn.addEventListener(MouseEvent.MOUSE_UP, isUp);
  
  parceiros_btn.addEventListener(MouseEvent.MOUSE_OVER, isOver);
  parceiros_btn.addEventListener(MouseEvent.MOUSE_OUT, isOut);
  parceiros_btn.addEventListener(MouseEvent.MOUSE_DOWN, isDown);
  parceiros_btn.addEventListener(MouseEvent.MOUSE_UP, isUp);
  
  var mouseState:String;
  var mouseActive:String;
  var txt:String;
  
  empresa_btn.over.alpha = 0; empresa_btn.down.alpha = 0;
  parceiros_btn.over.alpha = 0; parceiros_btn.down.alpha = 0;
  
  function isOver (e:MouseEvent):void {
       mouseActive = e.currentTarget.name;
       mouseState = "isOver";
       trace (mouseActive + " " + mouseState);
       var isOver:Tween = new Tween(empresa_btn.over, "alpha", Strong.easeOut, empresa_btn.over.alpha, 1, 5, true);
  }
  
  function isOut (e:MouseEvent):void {
       mouseActive = e.currentTarget.name;
       mouseState = "isOut";
       trace (mouseActive + " " + mouseState);
       var isOut:Tween = new Tween(empresa_btn.over, "alpha", Strong.easeOut, empresa_btn.over.alpha, 0, 5, true);
  }
  

  Now, what I'm trying to do, is use the var 'mouseActive' which returns the names of right button inside the interpolation as the clips.

  The problem is that the 'e.currentTarget.name' is not the 'movieClip' itself... it is just a string with the name of the movieClip.

  Example: whenever I try to do something like this:

  var isOut:Tween = new Tween(mouseActive.over, "alpha", Strong.easeOut, mouseActive.over.alpha, 0, 5, true);
  

  It will return an error to the cause, as I said, mouseActive is not a clip, it's just a string (at least I think).

  
  Thank you already support (new)

  And mind to please my nickname

  Here's what I offer before raised the potential issue of button...

  Try:

  var mouseActive:MovieClip;

  function isOver (e:MouseEvent): void {}
  mouseActive = MovieClip (e.currentTarget) .more;
  mouseState = "isOver".
  trace (mouseActive + "" + mouseState); comment this out at the moment
  var isOver:Tween = new Tween (mouseActive, "alpha", Strong.easeOut, mouseActive.alpha, 1, 5, true);
  }

• string in the format spreadsheet in table: Missing comma

  Hi all

  Plug-in function "string in the format spreadsheet en table" with LabVIEW 2014. I do not understand why, but the point numbers are truncated at the output of the function.

  This is the VI as an attachment.

  Thanks for your help!

  Hello

  The decimal separator of your OS comma an EST. So either you replace it with a point or you replace the %f in your code by %; % f:.

  

• RICs when MergeTable using with the names of multiple tables

  Hello world!

  I just saw, as v11 OWM MergeTable media with the names of multiple tables. As I couldn't find anything in the documentation, here's a question:

  It also means, that RICs are automatically taken into account regarding the order of INSERTS/CHANGES/DELETES?

  That would actually really great and simplify the merge of our application mechanism a lot.

  Kind regards

  Andreas

  Hi Andreas,

  This feature works the same MergeWorkspace, but with a smaller set of tables.  Tables will always be merged into the order of the child table first, then the parent tables.  However, foreign key constraints are not validated until all tables have been merged.  This would prevent a mistake to be triggered when the child table merging before the parent merging table data in the parent workspace.

  Kind regards

  Ben

• random string after the name of the application installing app webworks

  Hello

  I have my webworks named "com.dev.improve" app, but when I run webworks run to run the project and deploy it on my phone, the terminal theres a list of info logs, which says:

  [INFO] Installing com.dev.improve.testDev_dev_improve2ba0b1c0...

  Why am I this weird string after my app name? What can I remove prossibly?

  Thank you

  This is the Package Id for your application.  You can see by opening the BAR file in a program such as WinZip and open the META-INF/TRANSLATED. MF file in a text editor.

  For unsigned files BAR, it's a dummy value to always start with test.

  Signed BAR files from the Package Id is generated based on the name of the Package you specify (com.dev.improve in your case) and your signature account.  This creates a value unique for each application and use the device to determine whether a BAR file being installed is a new application or an upgrade of an existing application.

• How to create a list of button by using the names of a table

  Hi, I want to create an application that displays detailed information about something. for example, as the profile of the users. my application will read an xml response from the server that contains the list of the names of the users. How to create a list of buttons using the names and then each button that displays the name that can be pressed and displays detailed information about the name? I think that it is similar to the BBM app that displays a contact list of the user. Thank you very much

  Create a ButtonField as:

  ButtonField [] users_buttons = new ButtonField [number of users];

  Initialize the uasing dem:

  for (int i = 0; i)<>

  users_buttons [i] = new ButtonField ("user", Field.FIELD_HCENTER |) ButtonField.CONSUME_CLICK);

  Make dem clickable setchangeListener method of buttonField and Ooveride Navigation click to make a few operatoin by clicking on the specific button!

• Implement conditional read-only column in the set of two Tables

  Hello
  
  I would like to implement a mechanism of "read-only conditional" on a column in a table with two tables in total to be involved in this situation.
  
  I have a demo/proof of concept of the present and things work as expected in the tests I've done; However, I would like any input as to if there is a better way, etc.
  
  This is a far-fetched but demo that illustrates the main ingredients however. Oracle 10.2.0.4 version 64 bit on Windows Server 2008 Release 2 64-bit.
  
  -Table DDL and small sample data
  

  create table band(
    band_id   number primary key,
    band_name varchar2(20),
    status    varchar2(20)
  );
  
  create table band_member(
    band_id references band,
    member_name varchar2(20)
  );
  
  insert into band values(3, 'The Rutles', 'prefab4');
  insert into band values(4, 'The Beatles', 'established');
  commit;
  
  insert into band_member values(3, 'Ron Nasty');
  insert into band_member values(3, 'Dirk McQuickly');
  insert into band_member values(3, 'Stig O''Hara');
  insert into band_member values(3, 'Barrington Womble');
  commit;
  
  insert into band_member values(4, 'John Lennon');
  insert into band_member values(4, 'Paul McCartney');
  insert into band_member values(4, 'George Harrison');
  insert into band_member values(4, 'Ringo Starr');
  commit;

  -The rules relating to the conditional objective of read-only
  
  1 is not allowed to update band.band_name when band.status = 'prefab4'
  2 is not allowed to insert/update / deletion of lines of band_member when the parent a band.status row = 'prefab4'
  
  -The triggers used to implement the goal (current solution)
  

  create or replace trigger t1
  before update of band_name on band
  for each row
  when (old.status = 'prefab4' or new.status = 'prefab4')
  begin
    raise_application_error(-20010,
      'can not update band_name when status=''prefab4''');
  end;
  /
  
  create or replace trigger t2
  before insert or update or delete on band_member
  for each row
  declare
    l_status band.status%type;
    l_band_id band_member.band_id%type;
    cursor l_cursor (p_band_id number) is
    select status from band
    where band_id = p_band_id
    for update;
  begin
    if updating or inserting then
      l_band_id := :new.band_id;
    else
      l_band_id := :old.band_id;
    end if;
    open l_cursor(l_band_id);
    fetch l_cursor into l_status;
    close l_cursor;
    if l_status = 'prefab4' then
      raise_application_error(-20011,
        'can not update child when parent status=''prefab4''');
    end if;
  end;
  /

  -Quick example of test for each condition
  

  update band
  set    band_name = 'THE RUTLES'
  where  band_id = 3;
  
  update band
         *
  ERROR at line 1:
  ORA-20010: can not update band_name when status='prefab4'
  ORA-06512: at "DEMO.T1", line 2
  ORA-04088: error during execution of trigger 'DEMO.T1'
  
  
  update band_member
  set    member_name = 'RON NASTY'
  where  member_name = 'Ron Nasty';
  
  update band_member
         *
  ERROR at line 1:
  ORA-20011: can not update child when parent status='prefab4'
  ORA-06512: at "DEMO.T2", line 18
  ORA-04088: error during execution of trigger 'DEMO.T2'

  As I said, while my simple tests seem to show the correct results, there I was wondering if there could be a better way to implement such functionality.
  
  I tried to provide the information needed, but if I managed to omit something, please let me know.
  
  See you soon,.
  
  Chalfont

  Hi, Chalfont,

  user13146957 wrote:
  ...
  I'm went to the road to slider to add the clause "for update" to force the serialization on the line - i.e. the idea was to avoid the case where another session might want to update the State a moment after my extraction but before the rest of the finished code. Who is?

  No, not really. The trigger on tape prevents anyone else from ever change their status from 'prefab4' to something else (or vice versa).
  Even apart from this, you put some efforts to prevent something which will be allowed a fraction of a second later (or maybe the other way around). What is significant in that split second?

  I didn't think about other ideas rather than the approach of the trigger, but came up empty, somehow, to this day. I am open to resort to others and make some schema changes is not off the table either.

  FGA (Fine grain access), or his brothers and sisters more older VPD (virtual private database) can also do what you want, but instead of trigger an error, they ignore the illegal action. This can be an advantage or a disadvantage, depending on your needs.

  Another approach is for the owner of the table, not to grant INSERT, UPDATE or DELETE privileges to anyone: all DML must be made via a procedure (or procedures) belonging to the owner of the table, which grants EXECUTE privileges instead of other privileges.

• By passing a string as the name of a function of mouse event listener?

  Hello

  I am trying to essentially pass a string as a function name in an event listener, but I do not know how to approach the issue.  Is there a way to convert a string to a function?  I don't know how to Word my question, so I apologize.

  Here's some code I have for me to show you what I'm doing.

  package {}

  some import declarations

  public class changes extends MovieClip {}

  var functionName:String
  var aBox: Sprite;

  public void changes() {}

  nomfonction = "hemagg";

  createButtonBox (16, 16, 32, 32, functionName);

  }

  public void createButtonBox (anX:Number, aY: number, aWidth:Number, aHeight:Number, aFunction:String) {}

  
  aBox = new Sprite();
  Some code for box drawing

  aBox.addEventListener (MouseEvent.CLICK, [aFunction] ())?

  addChild (aBox)

  }

  public void aFunction(event:MouseEvent) {}

  trace ("test");

  }

  }

  }

  I'm on the right track, or is not possible?

  Anyway, thanks in advance.

  If you pass a string representing a function name, then you must use the notation of support to have this interpreted as an object/function string.  Try to use...

  aButton.addEventListener (MouseEvent.CLICK, this [functionToCallTo]);

• class string for the name operation

  Hi, suppose I have three classes with names like

  enemy1

  enemy2

  enemy3

  and a table enemyIndices = [1,1,2,2,3,1,2] or something like that.  Is it possible to compose on the fly class names so that I can write something like

  for (i = 1; i < = enemyIndices.length; i ++)

  {

  var className:String = enemy + i;

  var obj:Object = new className(); / / to create enemy1 etc.

  } ?

  Of course, I can use if... else statement to achieve this

  if(i==1)

  new enemy1();

  another if (i == 2)

  new enemy2();

  another if (i is 3)

  new enemy3();

  You can use (I assume you mean to use the numbers in the table, not only its length)...

  for (var i: uint = 1; i<= enemyindices.length;="">

  {

  var ClassRef: Class = Class (getDefinitionByName ("enemy" + String (enemyIndices [i])));
  var obj: * = new ClassRef();
  addChild (obj);

  }

• How can I open XML form in Adobe reader, but not through the name of browser extension

  I'm saving the document as form Adobe XML dynamic (using Adobe LiveCycle Designer), when I open the document, I get this error and I do not have an Adobe Reader Installer.

  Please wait...

  If this message is not subsequently replaced by the good content of the document, your PDF file

  Viewer is not able to display this type of document.

  You can upgrade to the latest version of Adobe Reader for Windows®, Linux® or Mac by

  visit http://www.Adobe.com/go/reader_download .

  For more assistance with Adobe Reader, visit http://www.Adobe.com/go/acrreader .

  Windows is a trademark or one brand mark of Microsoft Corporation in the United States and/or other countries. Mac is a registered trademark

  Inc., filed with the United States and other countries. Linux is a registered trademark of Linus Torvalds in the United States and other

  country

  Open the form in Adobe Reader.

• How to retrieve the name of a table?

  I can cite a table so that it includes an index like this value:
  
  This ["myArray" + i] = new Array();
  
  But how I can extract the index value when the tables have a name property?

  No, it looks pretty clear. I just didn't read.

  You can assign a name to your berries property or really just the index property because that's all you want:

• Change the names of temporary tables created BY CKm and LKM

  Hello
  
  I am new to ODI.
  I want to know if we can change the default name structure that is used by ODi to create temporary tables.
  I have$, C$, and E$ table.
  For example:-if I want to keep I have $1 for a single schema and I have $2 to another schema.
  
  Is there a way by which we can do that?
  
  Thank you
  Mahesh

  Just follow this guide to make unique session temporary tables:

  http://odiexperts.com/interface-parallel-execution-a-new-solution
  There will be no interference then.
  Kind regards
  Alastair

• Two variables in the name of a table in the FROM clause.

  Hello
  I have a problem to make this work:
  
  SELECT *.
  OF tablename_YY_MM
  
  (This is part of the script I use YY and MM in different tables)
  I need to find a way for the script asks me every time on AA and the MM
  For example, the current name of the table "tablename_09_08" next month, it will be 'tablename_09_09 '.
  It seems simple, but I can't get it to work. There seems to be a problem with concatenate | and the underscore _
  Looks like this should be done with PL/SQL?
  
  If anyone can help it will be much appreciated.
  Thank you.
  
  Published by: user1067236 on August 11, 2009 02:21
  
  Published by: user1067236 on August 11, 2009 02:23

  SQL>SELECT * FROM tablename_&YY._&MM;
  Enter value for yy: 09
  Enter value for mm: 08
  old   1: SELECT * FROM tablename_&YY._&MM
  new   1: SELECT * FROM tablename_09_08
  SELECT * FROM tablename_09_08
  

  HTH, Urs

• Can after get values a RGB pixel, hoe I write the name of the color?

  Team,

  I'm quite new to LabVIEW and I'm working on an application using USB webcam to capture the color of the object.

  So far, it's finished, but now I need to write the name of the color on the screen.

  Please, could someone help identify if IMAQ or Labview have this feature?

  For help in understanding:

  Below you can see the example.

  R = 236

  G = 0

  B = 116

  And the name of the color is pink.

  But the problem is how to get the name by using certain features available.

  

  Thank you.

  Kind regards

  JCG

  There is not such a function, but you can create a pretty easily.

  I would divide each color component by 64 and to get a value of 2 bits for each color.  Combining these (multiply/shift and add) would give you a 6-bit integer, which gives you 64 color combinations.  Create an array of 64 strings with the names of the colors and the correct name indexes.  You need to browse manually the first time and assign a name to each color, but that wouldn't be too bad.

  Bruce

• SQL how to use a variable and use the result as a reference for the name of the table

  Hi all

  I have new in the declaration of Oracle, sorry in advance if something is easy for you all. BTW, I have this scenario:

  I have a table OL structured in this way:

  Date - it contains dates, for example 11/01/2015

  TableName - it contains strings, for example, OL1, OL2, OL3 and so on...

  Then I have a different table, the name of these tables are of the same name in the table of the OL, so I have table table, OL1, OL2, OL3 table and so on. The structure of these tables is the same. And Yes.

  table OL1

  ---------------------------------------------------------------

  ID LAST NAME FIRST NAME PHONE

  ---------------------------------------------------------------

  1 JOHN DOE 12345679

  2 PAUL 111111122 TIBBS

  table OL2

  ---------------------------------------------------------------

  ID LAST NAME FIRST NAME PHONE

  ---------------------------------------------------------------

  1 ANNA KRAIG (NULL)

  NATHAN FRESHMANN 111111133 2

  If the scenario is clear, I would like to retrieve the value (null), research in all the OL * tables by using the value of the OL table (tablename) max.

  If I'm going to do these simple steps, I got the result:

  Select max (TableName) OL

  the result will be OL2

  # I know not how to use the option set to avoid changing the table name in the sql statement all the time.

  set mytable = 'OL2.

  Select Name, family name

  of & mytable

  When the phone is null

  Any idea?

  Thank you very much in advance.

  Hello

  run immediately "select dt.log_id, obj.presentation_name, dl.begin_time

  bulk collect into v_result_set

  of ' | v_ol |' dt join internal ol_object obj on

  DT.object_type_id = obj.object_type_id

  inner join ol_chunk_log dl on

  DT.log_id = DL.log_id

  where dt.data_value is null';

  dbms_output.put_line (v_ol);

  end;

  Correct the code such as:

  run immediately "select dt.log_id, obj.presentation_name, dl.begin_time

  of ' | v_ol |' dt join internal ol_object obj on

  DT.object_type_id = obj.object_type_id

  inner join ol_chunk_log dl on

  DT.log_id = DL.log_id

  where dt.data_value is null' bulk collect into v_result_set;

  
  

  for i in v_result_set.first ... v_result_set. Last

  loop

  dbms_output.put_line ('LOG ID: ' | ) ( v_result_set.log_id (i)) ;

  dbms_output.put_line (' NAME CLOSELY: ' |) v_result_set.presentation_name (i));

  dbms_output.put_line (' START TIME: ' |) ( v_result_set.begin_time (i)) ;

  end loop;

  end;
  

  Kind regards.