Read the output of command line

Similar Questions

• read the output of a path of analog output current voltage

  In DAQmx if you are unsure of the status of a digital output port, you can take a reading on this subject.  When I try this on an analog output, I get an error.  Is it possible to query the status of the output of an analog output?  I realize that I could follow the State with a variable, but a direct reading would be really handy.

  Hello, GIS.

  There is no way to read the output in the AO modules without wiring physically the signal to a module to HAVE.  You are able to use a variable to read the current value of the output, as you mentioned earlier.

  Channels AO multifunction boards, however, can be read through tasks of entry by rounting in-house channel to read ao vs aoground.

  Lisa

• Read the output values after each step runs in the User Interface of LabVIEW

  Hi all

  Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1

  Problem: is there a way to run the following steps programmatically and get values out of each of them?

  I have already extended a bit a complete interface IO for TestStand load any sequence, choose among the measures and execute step by step (something as an alternative to the steps run selected). What I'm trying to do is to add some actions between each step and do in the UI (I can't change the sequence!), so I start the NewExecution with some previously configured InteractiveArgsParam and option breakAtFirstStep set to true. Eventually I do just something like step over when debugging the sequence and it works well, but I didn't do well a way yet to read the output values of the place...

  So, if I wait before the end of the run I can read my results by treating the ResultObject, but it works only after the completion of the test sequence. Because I wanted to stop after each step, read the values, do some actions and continue to the next step, I've tried to register a running Trace event reminder View Manager. I see that after each step is executed, this event is fired, but when I try to read that a ResultObject returned in the event data it is not filled with values (ResultList seems to be empty?). Is this a correct behavior or maybe I'm reading the wrong way? (It's the same VI regarding the reading of the ResultObjects after the sequence ends and there it works very well for tables, containers and other types of data).

  As I mentioned I can't change Test sequences, I can not add a UImessages.

  What are my options? If the trace event returns output all the values from each steps or is it just used to check the status? Or maybe there's a completely different approach to this issue?

  Thanks in advance for your suggestions,

  Best regards.

  When you manipulate the UIMessage trace (you need this before the return of the event or you will present the race conditions), download myuimessage. Thread. Then call Thread.GetSequenceContext (0, & Iplease).

  And then on the context of the sequence, either go to PreviousStep.Result if it exists, or watch Locals.ResultList.

  Trace events occur between the steps executed step the more recently is the previous step, but it is also a trace event to the beginning before any measure have run at this time, there will be a previous step.

  Hope this helps,

  -Doug

• Adobe Reader 11 (XI) will not open the file via command line

  Hello

  I posted this question probably inappropriate topic earlier today, so I am repeating again.

  I installed the new Adobe Reader XI today and when I tried to open some PDFs via command line, it reported a syntax error. Now, this syntax worked so far on versions 9 and 10 (I checked today with them and it does not), so my question is - where can I find new syntax, if there are? Google search did not help. Or what else could go wrong?

  In previous versions, I was able to open the pdf file (on page 5) like this (everything was taken from the help file 'Open settings')

  «Page "/A" CompletePathToAdobeReader = "CompletePathToPDF", 5"»

  That is to say

  "C:\Program Files (x 86) \Adobe\Reader.

  but now - not that it opens a specific page, but it won't open the file at all.

  Edit:

  Operating systems: Windows 7, Windows XP

  Thank you.

  Post edited by: v604

  Yes, he has correctly reported because there is a syntax error in your order. Try spaces between the /A switch and open the setting. Try this:

  "C:\Program Files (x 86) \Adobe\Reader" /A "page = 5" "d:\V2\DataSheet.pdf" "."

  I hope this helps.

  Sumit-

• The file of the bar - descriptor.xml (and make the application of command line)

  I made a game with air and it is online for sale on Android and iOS. It is somewhat popular and I thought to put up on Blackberry for quite awhile now and with the Port of soon-to-start-A-Thon, this seems to be a great time to finally make it.

  BlackBerry is not very common that here where I live in Sweden, however it still looks like an interesting with a potential platform if I want to get the trip. Unfortunately I don't own a camera myself so I'll use the Simulator. With some graphic problems with the simulator when running in mode BB10DevAlpha (icons does not appear right) and the Simulator is very slow when running in mode BB10DevAlphaSafe (chart appears on the right, but it seems that updating them requires more CPU my computer are available).

  The game is built using nothing other than Adobe Flash Professional CS6 and a bunch of command line tools to build the package and sign. I've only got an old computer with Windows XP now since the death of my main PC, all at the time and since the Port-A-Thon is just a few days I do with what I got.

  Firstly I understand that only AIR 3.1 is supported by Blackberry 10, so I use the old AIR SDK 3.1 to create a SWF (flash) file.

  What I really need to do should be used in the exported SWF file of the game, then use the command line tools provided by RIM to build the package, right?

  Except that I did not count on bar - descriptor.xml to be so difficult to understand.

  I was brought to the documentation here: https://developer.blackberry.com/air/documentation/bb10/bar-descriptor_config_file.html

  It says Adobe AIR at the top, the platform selected is Blackberry 10 and the title says "bar-descriptor configuration file", so it must be in the right place!

  I start by trying the 'bar-descriptor configuration example file"on this page:

  ===========================================================

  
  
    
        None
        fake
    
   
    
     Name of the author
   
    
     gXXXxXXx ##XxXxXxxxXxXX #xxx
   
    
     Core.Games
   
    
     Icon.PNG
   
    
     HelloWorld - splash.png
   
    
     read_geolocation
     use_camera
   
    
     1
  

  ===========================================================

  Of course during the test I replaced a few things in the example above with the correct filenames for images etc, I just copied the example of right - off this time to you guys show what I mean.

  Firstly, I extract "blackberry-tablets-sdk - 3.0.0" in a folder on the disc, then I make sure as a full path to the "bin" in the SDK folder inside the path on the OS environment variable.

  Then I read on "Applications of Test using the command line": https://developer.blackberry.com/air/documentation/bb10/testing_your_application_cmd_ms_2010851_11.h...

  Now I run:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf myappnameicon86.png bg splashscreen1024.png - device 192.168.8.128

  Note that "bg" is a folder with 500 images that must be accessible from the app. I hope that I can just add the folder like this and not type a path to each image file...

  What I get (in lib\adt.jar via the bat file):

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Okay, so the example did not straight on the box.

  Now, I've read all paragraphs in the first URL I linked above ("the bar-descriptor configuration file"). I start my own XML file and make sure to include everything that is marked as "necessary". That's what I'm left with:

  ===========================================================

  
  
      MyCompany
      
          
          com.mydomain.myappname
          My App name
          3.0.0
          
              splashscreen1024.PNG
          
          1.5.0
      
      run_native
      
          application
          
              bb.action.VIEW
              application/octet-stream
          
      
  

  ===========================================================

  I have no idea of what concerns the block whole call target, but it took, so he must be there.

  Now I launch (notice that myappnameicon86.png is gone since no icon is mentioned in the above XML code, it is not mandatory):

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf bg splashscreen1024.png - device 192.168.8.128

  Yet once, I get:

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Frustrated I get autour on the forums for answers, because the official documentation is nowhere getting me.

  I'm left with this:

  ===========================================================

  
  http://ns.Adobe.com/air/application/3.1">
      com.mydomain.myappname
      1.5.0
      
      My App name
      
      My App name
      
      
          myappname.swf
          standard
          fake
          true
          true
          landscape
          GPU
          fake
      
      
          myappnameicon36.PNG
          myappnameicon48.PNG
          myappnameicon72.PNG
      
      fake
      fake
      
          qnx.fuse.ui.skins.QNXDevice
          qnx.fuse.ui.skins.QNXNetwork
          qnx.fuse.ui.skins.QNXSensors
          qnx.fuse.ui.skins.QNXSkins
      
  

  ===========================================================

  Looks like the XML code that I use when I build for Android.

  First of all it doesn't have the tag root of qnx, but also nothing of the icons are of the required size (86 x 86). The tag required splashscreens and invoke target is also absent, to name a few. No idea of what the entire block of 'extensions' really do.

  Surely, this does not work:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf QNXDevice.ane QNXNetwork.ane QNXSensors.ane QNXSkins.ane myappnameicon36.png myappnameicon48.png myappnameicon72.png bg-device 192.168.8.128

  Success in building the package BAR to my infinite surprise!

  He even managed to install on the Simulator. An icon for the game. However when it auto-couru the app went into landscape, thought for a second and then crashed (or you leave?) without a message.

  Perhaps because the required qnx tag was missing in the XML?
  Perhaps because images in the bg file could not be loaded?
  Perhaps because he had no permission to keep screen from dimming?

  I have no idea. I tried to add XML to qnx at the address previous to the bar - descriptor.xml, I thought that maybe he needed both the qnx block for when you run the application and the application block for when packaging. But now, he has complained of something like XML is not not clean ("' fatal error: markup in the document following the root element must be well-formed." ").

  So he came to it, I have to ask for help if I ever make the deadline of the Port-A-Thon.

  (1) how am I supposed to write the bar - descriptor.xml?
  (2) what command line starting by "blackberry - airpackager.bat" is OK to use?
  (3) all I have to do is build the SWF using Adobe Flash Professional CS6 and then pack it using the Blackberry SDK, right?

  First of all, there are two xml files that you need.

  One is called the manifesto, is to AIR and is called yourappname- app.xml. It is identical to the ones you use for Android and IOS, though some elements will be ignored. It's one you need to switch on the command line, and is probably causing the 'Namespace' missing error message. A file manifest a minimum is:

  
  http://ns.adobe.com/air/application/3.1">
  
      com.example.appname
      My Fabulous Game
      1.0.0
  
      FileNameOfYourSwfWithoutExtension
      YourCompanyName
      
          [This value will be overwritten by Flash Builder in the output app.xml]
          true
          false
          none
          cpu
          false
      
  
  

  Replace the text in red with your own stuff.

  The second xml file is called to the bar of descriptor. It is for App World and the installation process and is called bar - descriptor.xml. It contains information about signing code, icon, permissions etc. A simple bar - descriptor.xml is:

  
  
     
        none
        true
        landscape
        false
        cpu
     
  
     
     your-name-on-certificate
     your-id-on-certificate
  
     core.games
  
     
     1
  
     
     
        icon86x86.png
     
     splash-landscape.png
  
     
     2.1.0.1314
  
     
     access_shared
     access_internet
     play_audio
     set_audio_volume
  
  

  Make sure that you at least change the red dots.

• The question of command line CAP.

  So I'm all new development of blackberry, but I found an inexhaustible amount of info (from this forum and experienced developers).  I read a lot of posts on the lines of command about the file randomly Googling rapc.exe.  My problem is that my .cod files are too big.  I understand the maximum number of bytes allowed in a .cod file is 64 KB, unfortunately my files have reached 90 KB in size.  I can't delete images and unused classes because they are all very functional and that it.

  I heard the wind of a command line that can be introduced to rapc.exe which will set - slicesize = NNNN and datafull - NNNN = as a solution to my problem.  This seems perhaps too technical for my situation, I'm not using my head today.  The problem is I'm having trouble finding how to add these command lines, or what that means yet.  My blackberry app is that several weeks of deployment AppWorld I love just to test it on my blackberry like point and click does not create the same user as on a touchscreen phone experience.

  I know there are a lot of great developers on this forum, and I understand that there are a lot of excellent programmers.  Can someone help me to conquer the sensation "noob" I'm feeling right now and guide me with a somewhat dummed down from the version of the technical explanation.

  In short, how can I add the command lines above named rapc.exe preferably with output using 3 third party programs or modifying an output by the compuler file.  I want to implement the compiler to ignore the warnings of size for the .cod files, as long as it's not a bad practice.

  Thanks in advance! -Andrew Mason

  Ok.  I was average overhtinking this, I guess it's easy to limit the size of your .cod simply by making the additional source folders.  I made two additional folders res and split my resources evenly among them.  There was a lot of workarounds that appeared to be more work than they were worth.  It's a quick and easy solution.  Thanks for the link, it helped a bunch got my brain moving.

• How to read the output of vm-support

  When I extracted vm-support, I find a lot of files and directories. too much info make me lost. For more information, such as the ESX adv config setting, I can easily browser and get what I want, but if I want some info on vswitch, physical network interface cards, I know that most are etc/vmware/esx.conf, but this file is hard to read against esxcfg-* command. There are a few tools can convert the vm-support info, make it easy to read and understand

  Dinding-

  Once you extract the files, see the directory/tmp for the outputs of most common commands, such as vdf and esxcfg-nics, etc.

  Dave Convery - VMware vExpert 2009

  ************************

  Accomplish the impossible only means that the boss will add it to your regular tasks.

  Doug Larson

• Capture the output of command Unix in WLST

  I'm trying to write a Python/WLST script that connects to a particular area based on the machine on which the script is run. My thought was to issue the command of Unix 'hostname' get the name of the machine operating systems, test against it and connect to the output of the base. My first thought was to do something like
  
  
  Import os
  HR = os.system ('hostname')
  
  If HR == "name":
  ConnectToAS()
  
  It does not of coarse because the os.system () command returns the Boolean output from the statement code and not the output. I then tried to watch using the mod 'subprocess' but who returns the following:
  
  Problem call WLST - Traceback (innermost last):
  File "/ home/beaadmin/bin/scripts/wlst/wip/checkMachine.py", line 1, in?
  ImportError: no module named subprocess
  
  Anyone know of another way to run a Python/WLST script which get the name of the machine on which it will run and make the name available for the rest of the calling script?
  
  
  Any help would be greatly appreciated.

  I came across your post looking to solve this same problem. I found a solution myself. Since jython, you are allowed to use a java class in your python code. So to get your local host name, use:

  HR = java.net.InetAddress.getLocalHost () .getHostName ();

• How can I use the clang of command-line compiler?

  It is said in the new update clang is a command line tool.

  Do you have, or wish to develop, C, C++, Objective-C or Objective-C++ code you want to compile it on the command line with the clang compiler? It is a facility that is optional and not included with OS X.

• read the measure about 10 lines instead of each line

  Hello.

  I have the dilemma.

  I have a file of great extent with 1ms rate and number of columns. If a single line, a miliseconds.

  Now, I don't need this big resolution, I only need data to 40 ms.

  How can I do?

  Thank you.

  Something like that.  I clicked on the text file reading and has configured to read the lines, reading 10 lines at once.

  

• W530 - activate the camera from command line?

  Hi guys,.

  I searched for a way to activate and capture and image of the camera integrated in the command line. Does anyone know how to do? I have a W530 with Windows 7 64 bit.

  Thank you!

  Lenovo is not a tool like this, but I did a quick search on google and found a few utilities in the sample and the code:

  http://batchloaf.WordPress.com/2011/04/06/Snapz-a-command-line-cam-image-grabber/

• interpretation of TCP read the output string

  What is the right method to interpret the data from the TCP Read function? The output is a string of characters, which are obviously not hexadecimal values. How can I convert the string to a binary table or bytes?

  OK, time wild guess...

  The first four bytes are an indication for SYNCHRONIZATION

  The four bytes 0 4 0 0 is a 32-bit integer, GIS bytes less first. 1024

  Then you have 6 0 0 0, which could be another 32-bit integer, lsb first. 6

  Then your random data

  Rod.

• The application's command line arguments get the path to the file in windows Explorer

  Hello

  I am trying to open a file with my labview application .exe, so I thought that windows was sending the file path double clicked in Explorer solutions in the form of argument, but all I get is the name of my exe file.

  

  Does anyone know how to set up windows or the application to get the double click path from the Explorer, which has the file extension has already been associated with my exe?

  Thank you!

  I'm not sure I understand, but I think you want your Labview program to open another file, as a file of perimeter?

  Have three basic choices.

  Hardcode the path with file name in your program http://zone.ni.com/reference/en-XX/help/371361K-01/glang/path_constant/

  Use the file open vi and for the user to select the file to open http://zone.ni.com/reference/en-XX/help/371361J-01/glang/file_dialog/

  Write your program to accept a http://digital.ni.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364 command line argument

• How to set address static IP for cisco APS to the controller via command line

  Hello

  in our project it 208 APS registered in a WISN-1 controller

  How do I assign a static ip address to this Aps via command line in a controller 4404

  Thanks to the Internet, it takes more time to assign the static ip address

  You don't mention what version of the code, you are on but on 7.0:

  ap static IP config activate

  You can also add

  ap static IP config add domain

  ap static IP config add nameserver

• How can I start using the netsh wlan command line ICS (microsoft virtual card)?

  I am using windows 7 Home premium SP1.

  I tried everything, but I can't able to start ICS?

  whenever I try, its gives me the error each time.

  give me any suggestions?

  Thank you.

  Hi JL,.

  You can start ICS (Internet Connection Sharing) / create a hosted in Windows 7 with Netsh wireless network by using the following command after you have enabled the functionality of Windows 7 (ICS, Internet Connection Sharing) network load balancing.

  How can I get a command prompt?

  http://Windows.Microsoft.com/en-us/Windows/command-prompt-FAQ#1TC=Windows-7

  Open the window network connections , right click on network adapter connected to the Internet and select Properties. Then select the sharing tab, check Allow other network users to connect through this computer's Internet connection, pick Microsoft Virtual WiFi Miniport Adapter network connection name in the drop-down list and click OK.

  Once you open command line successfully, you can run the following commands.

  Define the details of the network:

  netsh wlan set hostednetwork mode = allow ssid = YourVirtualNetworkName key = YourNetworkPassword

  Start the wireless hosted network:

  netsh wlan start hostednetwork

  To see details of hosted wireless network, including the MAC addresses of the users connected:

  netsh wlan show hostednetwork

  Let us know the status of the issue.