Read the text box.

Similar Questions

• Automatically put the cursor in the text box to start

  Hi guys

  On the picture below you can see a small piece of my FP. It is a part of a bigger FP for a pretty huge electronics test. Each PCB got its own series number of barcode. I have a drive that is connected to my keyboard. Then when I read the code bar, numbers will appear in the text box on my FP, IF i first click on the text box. Then the user must only press START to do the test. My problem, or wish, if you like, is that when the program starts, or a test has completed, the cursor/marker is placed in the text box, so I just have to read bar codes.

  Currently, the user must click in the text box before you read the code bar. Is it possible that this can be done by Labview?

  I n node property checked yet, because I'm busy to something else right now at work. Just write in my break.

  

  Thanks for any help!

  PS I would have found the answer in the forum, but I am from Norway, and not all of the language of the computer is easy to translate since I use windows Norwegians. I belive that it is called cursor or marker however.

  Kind regards

  Even

  Hello

  The property node "KeyFocus" attached here brings the cursor automatically in the text box.  Set the "Val (Sgnl)" blank to trigger the event associated with this area of text (if necessary).

  I hope this helps.

  

• Regarding events for the text box

  Hi all,

  I'm new with the Labview I have it the simple program I use the tab control in the tab control I have set Num control a (text box) in the tab 1 and Num B in the tab2 and control on the front panel, I place the indicator of Num C.I want when I set the value of a control number and enter then value goes to the led num c.Simillarly when I put the value B number and press on enter, then the value of B will go to the num indicator. How do I put the event on the text box as the value of A or B num command will go num indicator capers press on enter for the number corrosponding control.

  Due to the fact that I can't delete my post, I'm editing only say I am ashamed of what my response was completely wrong because of the mistake of reading your question :/

• My font too small in the text box, all screens, all is several small

  I find it difficult to read the text in the text box in Web page IE and firefox as well as any other window I open in my computer. I couldn't find the solution for this problem on the internet, including using microsoft and forums. Please don't suggest me IE uncheck options - move - visual blah blah or press on CTR and scrolling up, none of them are working. I think the problem in windows vista, but I can't find what caused it.

  Hello
  In Vista...

  Try a different screen resolution. Right-click on the desktop > personalize > display settings > resolution. A lower resolution will make everything bigger. Not every resolution will be usable - some likely to distort images or text. Make the tests until you find the resolution that works for you.

  Hope this helps,
  Don

• Read-only text box.

  I'm on the APEX 4.1.1.00.23. I'm doing a read-only text box. It works but the to-go box and put it on a single line. It doesn't look very good. I changed the screen for the item to display only and it does the same thing. Are there

  in any case, we can change the read-only text box and not take the box or formatting?

  Thank you

  PAM

  PAM wrote:

  I'm on the APEX 4.1.1.00.23. I'm doing a read-only text box. It works but the to-go box and put it on a single line. It doesn't look very good. I changed the screen for the item to display only and it does the same thing. Are there

  in any case, we can change the read-only text box and not take the box or formatting?

  Make read-only conditionally temporarily or permanently?

  In the first case, use a textarea element with the readonly attribute of the element instead of the built-in read-only properties. Set the HTML attributes of the element form item to the text box to:

  readonly="readonly"

  If it must be made conditional or temporary, explain the requirement in detail.

• Cannot change the text box.

  Adobe Acrobat DC recently auto updated to the latest version, and it seems that the new version does not change the text boxes.

  The screenshot below shows what I mean.  I added a text box and pointed the police to change the size / font style / color, but it is gray just to go out in the toolbar properties (Ctrl + E)

  

  Has anyone experience this problem?

  Hello

  We have released an update today which solves the problem of the properties toolbar and now you can continue to use it outside of the app commenting as well. Please open Acrobat or Reader DC and visit help > check for updates to ensure that you are on the latest patch.

  Details on the release: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-august-02-2016.html

  Please let us know how it goes.

  Thank you

  -ashu

• How can I make the text in all the boxes down following objects when the text box is changed from 1 to 2 lines?

  Hi people Muse.

  I'm faced with a problem of text box:

  At the bottom of my page, I have the title "ACTING ERMUTIGEN ZUM". Without any manual adjustment, I was happy to see that the text box pushes down the following objects as soon as the title Exchange of 1 to 2 lines. Point out clearly: I didn t add any point to stop or change any additional settings to achieve this, it just happened automatically and that's exactly what I want to happen.

  To my confusion, I can´t find a way to apply this behavior for the second title 'COURAGE OBSERVES UND LOSEN. It s on the same page. When I drag the breakpoint controller in the design-time view from the left to the breakpoint 900 pxor do it in the browser after export of the site, the title changes from 1 to 2 lines, as assumed, , but then the next Don t objects react and stay in the same place they stay when the title takes only 1 line.

  You will find the site on businesscatalyst:

  WILLKOMMEN

  I´d appreciates your support very well. I m sure it s not a big problem, but after an hour of re - try and control and do not receive a millimeter in advance, I thought, he could be one of these 'Don t worry - here comes the solution'- Muse hero there, read this. What you...? ;-)

  Thank you in advance.

  Moritz

  –––

  1st Title: everything works fine...

  

  

  –––

  2nd title: the 1200 px BP do everything ready...

  

  .. .but as I drag the marker of BP to the left just as I did with the title 1, the 2nd title doesn´t lower content:

  

  If you set the text block "ZUM ACTING... "sensitive width via the resizing control, rather than"Stretch to the width of the browser", which will provide the behavior you're looking for.

  We will study the design compared to the difference of the browser view. It seems that how items are grouped in resizing behavior is different in the case of elements with parameters width Resize mixed, in the mode of creation of the Muse and the browser.

• How to put the line of text at the beginning of the text box?

  Hi dear friends,

  I have an input_txt which is an instance of TextArea

  When I type it in and press enter it captures.

  I need set the empty text box.

  If its been like

  input_txt. Text = "";

  But by doing like this prompt stays on the second line because support us on enter key.

  Is there a way to bring the prompt back at the beginning of the text box?

  Thank you

  Oh, I see your problem. It's because of what Raymond mentioned in your other thread - read his response to your response.

  The texts of TextArea of compensation when I press the Enter key

• Conditionally disable the text box

  I have a text box that I want to disable loading if another value of items is greater than 0.
  I don't want to make the read-only text box, like this poster from right across the page.
  
  I've tried several things, but to no avail. My last one was
  

  <script type="text/javascript">
  function disDescription() {
  var aa = $v('P148_ITEM_A')
  if (aa > '0')
  $x_disableItem('P148_ITEM_B', aa);
  }
  <script>
  
  onload="disDescription();
  
  {code}
  
  Cheers
  
  Gus
  
  Edited by: Gus C on Sep 28, 2010 7:58 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

  Hello

  Delete

  onload="addLoadEvent();"
  

  You don't need that when you use the addLoadEvent function.

  And where you have this line? It is up to the Page HTML Body attributes, without the HTML page headers.
  In any case, to remove it, you don't need it with addLoadEvent function.

  Best regards, Jari

• After you have installed windows on my notebook 10 notes all drop-down history menu and favorite tools have black background so can't read the text

  After installing windows 10 on my notebook that all drop-down menu history bookmarks tools etc. have black background so can't read the text

  It was much simpler that that I just check if my version of FireFox has been updated today it wasn't downloaded and everything beautiful. Thank you for everything that other gibberish "I also don't know solution but try this" typical in the forums with respect to proposed solution has no address or related to this question please

• Reorganization of the text boxes so that they mix upwards or downwards

  Hello

  I'm not sure to understand what happens when the text inline boxes are dragged - I have 6 on a page that are the width of the page but different heights and I would like to re - order them so they mix it up or down depending on where I drag them, but at the moment they go to the bottom of the page or disappear completely I can't work on the behavior.

  I think there must be a way of formatting.

  Thank you

  James

  Select each text box and if you use v5 Pages, visit the reorder menu and text wrapping set to None. Now, the text box are not repellent, and you can position them as you please. If you always use the Pages ' 09 and then again, select each text box and the Wrap Inspector, deselect object causes wrap.

• You can change the font size using the form in the preview (not with the text box). Having also arrow drawing trouble in preview.

  You can change the font size using the form in the preview (not with the text box). Having also arrow drawing trouble in preview.

  What problems are you having with the arrow? You go to Tools-> annotate-> arrow and an arrow appears. Then you can drag around the head and tail to make it to the desired location.

  

• Drag and drop the text box color - pages

  Hello

  I just upgraded from Pages 09 to 5.6 Pages. Pages 09, if I did drag a color from the menu of color on a text box, it might change the color of the text. 5.6 pages this action changes the fill of the text box, not the color of the text. Is it possible to force the behavior of 09 to 5.6? I change the color of the text much more often than the color of the background of the text box.

  Thank you very much!

  Force the behavior of Pages ' 09 v5.6? Absolutely not.

  Pages ' 09 and v5 are entirely different applications and not surprisingly, they work differently also. In the Pages v5, fill, text and a text box border color come from different parts of the application, not a central color palette.

• the text box changes color when you type in a google search and the cursor and the text becomes invisible.

  When I open Firefox, a cursor appears in the search text box, but I have to click on it before I can enter text. When I click on the text box changes color (from teal'c white to a light color) and the slider and I type text is invisible.

  Which may be caused by protection of typing"Comcast constant guard.

  'Configure the Anti-keylogger settings'-> disable

  • [874709/questions/874709]
  • [870165/questions/870165]

• How to enter special characters/symbols (i.e. the degree character) in the text boxes?

  Not a problem/w Firefox - I was wondering if there is a way to enter the special characters and characters (not on the keyboard) in the text boxes? I remember that there is a keyboard sequence that activates a context menu allowing the single character/symbol entry. Thanks in advance, Allan.

  See:

  • http://en.Wikipedia.org/wiki/Windows_Alt_keycodes
  • http://en.Wikipedia.org/wiki/Character_Map