reader of card SIM on HP probook 4525 s?

Similar Questions

• Can configure the reader of card SIM in EliteBook 8440p

  Hello

  I am trying to set up a network connection using the SIM card reader, but I can not configure the card reader (does not appear in Device Manager).

  I'm at the Portugal and the response of the forum I found work here.

  Can you help me?

  Best regards

  Rodrigo Oliveira

  You are the very welcome.

  Yes, you will need to see if you can still get a WWAN card supported listed in the 8440p maintenance manual.

  You cannot install a WWAN card listed in the service manual or the laptop does not start until the unsupported card is removed.

  It must also ensure that the antenna of the WWAN card is present in the compartment, in that it will.

• I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get i

  I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?

  The United Kingdom, where did buy you it?

• C55D-A-12N satellite can not read SD cards

  I got my Satellite for only a few months, and he was happily read the 8 GB SD card and then stopped.
  I bought a new 16 gb SD card, and it will not read either.

  I had cause to take the laptop to the factory settings and had a broken hard drive replaced.
  It does not read the card. I looked in the Device Manager, and he told me that the drivers are installed...

  . Can someone help please?

  Hello

  There's a reason simply why the SD card isn't recognized properly: the SD card isn't compatible.
  The Satellite C55D-A-12N card reader takes in charge the rest of media:

  8 MB to 2 GB SD
  SDHC 4 GB to 32 GB
  64 GB SDXC
  Mini 8 MB to 2 GB SD through adapter
  Micro SD 8 MB to 2 GB via adapter
  Any other MMC 4 MB more than 2 GB

  As you can see, the regular SD cards are supported by only the formats between 8 MB and 2 GB

• HP2101i with Windows 7 Home Premium cannot read SDHC card

  I have connected a VR Olympus-379 with photos on a 8 GB SDHC card with a USB port on my HP, and the following message is displayed in the desktop monitor: 'the situation is not available', and inside the box is a big X and the statement 'Q; ------is not accessible. Access is denied. "It does not recognize the connection. It only shows the DVD drive as the only device with removable storage. The same thing happens with my system Toshiba laptop C655 64-bit of Windows operation. How to do one or the other to read the card, so I can see/save photos.

  I just want you to know that the problem is solved. The SD reader was an old I knew couldn't read a map HC. Thank you for your kind cooperation.

• Satellite can not read xD card

  Greetings. I have the following problem with reading xD card. Capacity is 512 MB and it is the series M. card I have no problem with playback of standard xD Picture card but my computer laptop doeasn can't just see me one. Do you have any idea what should I do? Y at - it an update of firmware for the memory bank?

  Hello

  Have you checked in manuals s what cards are taken in charge and what are the cards can be read?
  Sorry, but you didn t write which laptop model you have, and it is not possible to check what cards are supported.

  Good bye

• HP ProBook 4525 s will not be under tension

  • Name of the product and the operating system:

  HP ProBook 4525; 12.1, 64-bit OpenSuse with the latest updates

  • Description of the problem:

  Laptop will power not at all, as if there is no power pluged - in. No lights turn on either.

  I tried reset hard several times - I even re-installed the battery CMOS with no effect.

  The problems started when the laptop suddenly stopped just as I started a certain PC game. After that the monitor is not

  production of image more, even if the laptop perfectly worked fine when it was pluged in to an external monitor.

  Knowing that I decided to buy a new monitor to see if it is the source of my problems.

  But ever since I have pluged in the new monitor to the laptop will not react to something else - as if no power is present. Some noise may be heard if I leave the battery pluged (I suspest just battery) but it disappears as soon as I plug the laptop to the power adapter.

  Any help would be much appreciated!

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .
  
  
  
  I hope this helps.

• Mac Pro can not read SD cards more

  Hello

  I need help with a strong issue with my Mac Pro, who can not read SD cards more. Gluing of any player on any USB, an SD card is not recognized more. Strange also when I put a CF card in the same drive, it works and I can see the CF card on my desk.

  Someone at - it a response?

  (Mac Pro 3.1, latest El Capitan, several players used, same problem)

  What do say to recognize?

  Finder?

  Disk utility?

  System Profiler?

  OS X: about system information and System Profiler - Apple Support

  Have SD readers that you have linked?

  When it is connected with an SD card lists what System Profiler under USB?

  You should see the reader and the card.

• Satellite U200-165: card reader do not read MMC cards but SD reading card

  Computer laptop Satellite U200-165, Win XP home,
  I got in 2006, while it wasn't any problem with my mmc cards.
  Yesterday installed Windows XP pro, installed the drivers: driver media flash and SD Secure module and card readers do not read MMC cards

  Help, please!

  Hello

  What exactly do you mean by MMC card doesn t work?
  What is the status of card reader in Device Manager?

  I checked the user manual (which can be downloaded from the Toshiba page) and it tells the MMC cards are certainly supported.
  I think it must be a software problem.

  In your case I recommend to update the Win XP for the last State and reinstall the Flash Media Driver and SD Secure Module again

• Is the card sim iPhone 5 c and 6 the same?

  Is the card sim iPhone 5 c and 6 the same?

  The iPhone and 5 c 6 both use cards SIM of Nano.

  Know what SIM card from your iPhone or iPad using - Apple Support

• Lenovo K5 note cards Sim and SD card problem

  Not be able to use two sim cards and slots with supplied SD card. How to use all 3 cards as the card Sim 1 and Sim 2, SD.

  Is not possible.

• HP Probook s 4525: HP Probook 4525 s memory clock

  Hi guys.

  Recently, I did a upgrade to my Probook 4525 s. I decided to add an another ram 4 GB 1333 MHz PC3 - 10600 module for an existing (Samsung M471B5273CH0-CH9). After I did it I discovered that both modules run together @ 1066 MHz and timings base as if only one module is installed in the system.

  So far, I tried to exchange with others 2 independent modules (a samsung and a SKhynix) where both were 1600 MHz PC3-12800 spec but the system still works @ 1066 MHz.

  The data sheet for Probook s 4525 said it supports 1066 MHz and 1333 MHz. But it never works at 1333 MHz. With the module specd 1333 or 1600 specd.

  Any thoughts on this topic?

  Mine is running CPU AMD Phenom II P960 with AMD HD5470 graphics processor dedicated.

  Hello:

  This link indicates that the processor will only work the memory at 1066 MHz.

  You can install the compatible memory back (1600 or 1333 MHz), but it will only work at 1066 MHz.

  http://www.CPU-world.com/CPUs/K10/AMD-Phenom%20II%20Quad-core%20Mobile%20P960%20-%20HMP960SGR42GM.html

  Memory controller

  The number of controllers: 1 Memory channels: 2 Supported memory: DDR3-1066, DDR3L-1066 Maximum memory bandwidth (GB/s): 17.1

• P7-1423w not reading SD card

  My SD card reader has recently stopped working.  When connecting my camera via the USB cable, the computer is able to read the card, but if I put the card in the slot turns on the green light on the front of the PC, but I can't find the map anywhere on my computer.

  My OS is Windows 8 64-bit.  My PC is fairly new, I bought it in March.  Help, please!

  It would be a good option to HP. They also identify as a hardware problem, then card reader will be replaced under warranty if they would help to solve the problem of too.

• My PC detects that my Kingston card reader into the USB port but wont read SD card - why?

  Several ports USB in my PC w/Windows XP see all my USB key and can read the data, but while "type" my Kingston card reader 4ports are recognized, it will not read the SD card. Why?

  You should have installed service pack 3, a long time ago, but this probably isn't the cause of your immediate problem.  Until the last part of your response, I would say that you need to get a new card reader.  However, if the card reader works on another computer, something seems to be the issue.

  What is the model of your Kingston card reader? It should appear on the label.

  With the drive connected to a USB port, open the Device Manager (start > run > devmgmt.msc > OK).

  Normally, you should see a number of entries in the category 'Disks' for the number of different locations in the card reader.  They probably will be named something like, "Kingston USB 2 HS-CF USB Device" and similar.  It should also have an entry in the "De Bus USB controllers" category that says "USB Mass Storage Device".

  Check all the entries above.  If none of them display a warning icon (exclamation), double-click the entry and to report to what appears in "Device status" and "use of the device.

  Right click on each of the entries corresponding to the card reader (i.e. one for each location in the hard drives category card reader and an in the category USB controllers USB mass storage device) and select uninstall.  After all, entries have been uninstalled, disconnect the player from the computer card and restart.  Now reconnect the card reader.  Windows should recognize and install it automatically.

  NOTE: If you have a hard drive connected by USB, you must be careful that you uninstall the correct USB mass storage device.  The safest way to do this is to use the "Remove hardware safely" to stop your external drive and then disconnect it from the computer.  At this point, its entry will be removed from the Device Manager.

  If the procedure above does not read your card before the card reader, I am ideas.

• Cannot get my dell to read my card reader or get to regonize my lg phone when I plug

  Cannot get my dell to read my card reader or get to regonize my lg phone when I plug

  Hi, Douglas,.

  Go to the Device Manager (hold the windows down and press Pause/break) and look for a direct entry for the card reader or possibly an entry of "unknown" USB device Uninstall the card reader or the unknown USB device (RIGHT click on the device and then click on Uninstall LEFT) and then restart the PC and start Windows it should detect and reinstall the card reader. Uninstalling/reinstalling fixes several issues of device.

  http://en.community.Dell.com/support-forums/desktop/f/3514/t/19270409.aspx

  How do you connect the LG?  You use the mass storage Mode?

  Tools-> tools-> USB mass storage Mode

  http://www.lgforum.com/forum/boards/carriers/Verizon/topics/USB-drivers-for-LG-dare-not-working-on-Windows-XP-SP3