Readers compatible recovery/Bootable with Portege R200

Similar Questions

• Advanced Port Replicator III more compatible with the Portege R200

  I just ordered a new Portege R200 and above-port replicator... However, I note that the R200 is not listed in the list of laptops supported for this Replicator! Can anyone confirm if I have made a mistake and need to change the order?

  Will be

  I visited the area Options & accessories on the European site of Toshiba, and like you said the Portégé R200 is not listed in the list of mobile phones compatible.
  So I assume that the Advanced Port Replicator III more (PA3474E-1PRP) does not support the protected R series.

• Portege R200 recovery CD recovery problem

  I tried to recover with different portege R200 from the recovery disks. The two models are identical, and both models have the same problem. I boot with the recovery disk 1, I get the choice of 1, 2 and 3.

  I choose number 1 to retrieve the machine (a recommended) hard disk, and then restarts gives me another set of choices. As soon as I make a choice and confirm it, I get an error message saying that my cd/dvd drive is not connected. The CD/DVD drive is a USB which I've tried two different brands with the same result. All I can think is that I have to do something wrong.

  If someone knows what that please let me know.

  Concerning
  David Tarr

  Hello

  I studied a bit in this forum and found this interesting thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=32612罤

  There is a list of the compatible and tested external CD/DVD drives.

  one) Toshiba, PA3352E-SCD2, CD-RW/DVD-Rom USB 2.0 drive
  (b) Toshiba PA3402E-1DV2, Rev.501, USB 2.0 DVD Super Multi drive, SN: 5362870112
  (c) Toshiba, PX1055E-1NST, (Freecom drive), SN: 3431490096
  with a PC Card (16 bit) card, cable II, PCMCIA, Rev.043.242, SN: 18496 043 3999 0343 01093
  (d) Toshiba, PX1055E-1NST, (Freecom drive), SN: 3431490096
  with a CardBus cable II, MAP of BUS, Rev.136, SN: 16693 136 3999 0149 06122

  Is that not all external drives are compatible and updated day and in my opinion, this could be the reason why your laptop starts properly since the external hard drive.

• Portege R200 - works with or without extended desktop

  Jin
  the last 2 years I have worked with a provincial court 2010 portege now just bought a portege r200.

  I already had a problem with dual-view:

  at the office, I work with office extended Windows on a second monitor.
  at home, I had only the display porteges. but windows does not know ;)
  ... until I have adjust with windows control panel. When I work in the Office
  Yet once connect the second monitor and windows recognizes it. But a duty adjust
  again extended desktop settings (relative position and screen resolution).

  has tried to find a tool to work with two reg files. Nothing helps. now a hope
  the promotion of r200 could fix my problem. the graphics accelerator intel seems
  for can do what I want. but I haven't found a solution for my problem.

  someone at - it an idea?

  Best regards
  Martin

  Hello

  The same situation here. I have Tecra M1 and I turn it on manually every time because the portable store the last known configuration. On the new laptops it is much simpler because there is new option when you use the FN + F5 key combination and you can quickly switch between the different views.

  Please start Toshiba Mobile Extension tool and display services tab change and test it with internal/external image display different profile. I tested it with my laptop and it works perfectly.

  Good luck!

• Cannot connect Portege R200 with desktop PC on wireless network

  Hello

  I'm happy with newly acquired Tosh Portege R200.
  Successfully connected to the router and the internet, wifi.
  Changed the name of r200 and define your work group name so that the other PC will be detected - be they - and Tosh arise also under my network places, it does.

  So all hunky dory... until I tried to access the laptop on the desk, at which point WinXP threw a password request.
  And here's my question: since no password have been defined on the Portege (XP clean re-install) for all users or administrators what IS THE PASSWORD?

  Yours in hope and waiting oh great sage over there...

  Hello

  I have no idea what password you need, but usually, you have to set the right permission on the folder that you want to share on the network.
  I connected my two computers (both with Win XP) with a crossover network cable.
  Then I put the same name of working group on both computers and manually assigned IP address; IE: 192.168.50.1 and 192.168.50.2
  Then, I selected the folder-> properties-> sharing tab.
  Here you can set the permissions.

  Using the WiFi network, you must set the option for * Ad-hoc network.
  This allows you to use a connection from computer to computer.

• Portege R200 - PXE - E61: media test failure - insert system disk

  My Portege R200 PPR21E-00K00QEN computer means the usual stuff of toshiba: IE

  PXE - E61: media test failure, check cable of
  PXE - MOF outgoing PXE ROM

  Insert system disk in drive

  Now my model isn't a hard drive and I bought second hand, so I have no recovery disks.
  I checked the HARD drive and its seems connected properly.

  Would I need to buy an external drive and try a system disk or is there anything else I could try.

  Any suggestions or advice?

  PXE - E61: media test failure, check cable message appears because the laptop has attempted to boot from LAN.
  Why?
  Because it could not start the HARD drive, or another source like CD/DVD drive.
  Usually this happens because of faulty HARD drive.

  So how to fix?

  I think first of all you will need to replace the HARD drive.

  Since the Portégé R200 doesn't support CD/DVD drive, you must install the system using bootable flash USB stick memory or you would need to buy an external CD-ROM USB drive that would be compatible with protégé R200

• Start - option from menu on Portege R200

  The Toshiba Portege R200 has a boot menu option? I tried F12 and C and nothing happens. The only way I've found is to change the boot priority in the BIOS.

  Thank you, Rob.

  Hello Rob

  If you use CD or bootable DVD (supplied recovery media), you can use the C button and on this path, you must be available to boot from the CD/DVD (Toshiba drives).

  I have no experience with this model of Portege, but if you can see small symbols at the beginning upward under close to the HOME screen left or right-arrow and you will be able to choose which drive you want to start.

• Portege R200 - video corruption in XP SP2

  Hello

  I have a 'master' XP SP2 build that I adapt to the Toshiba Portege R200 laptop. It's the first Tosh, I have worked with (normally HP). I installed all the Tosh and tools software and downloaded/installed the latest drivers on the tosh site.

  Intermittently, I get the video corruption on the desktop in XP. Some parts of the screen or the menus and buttons display black and white trash.

  Has anyone other saw this and have any ideas how to fix? Is there an older video driver, that I can try?

  Thank you.

  Did you follow the instructions for installation on the website? You must install the drivers in the order in which they are listed. otherwise can cause problems with the machine: here is the order

  V6.0.1_6.0.2_BASIC Acrobat Reader
  help V1.03.00
  V3.1.2.45 Atheros client utility
  Bluetooth V2.1 (B20050307) monitor
  battery Bluetooth V3.20.00
  CardBus driver V208.2
  driver chipset Intel (intel ich6m) 6.1.0.1008 (LOGO)
  common modules V6.02.02
  Toshiba configfree V5.50.09
  controls V3.14.1702
  display the change of aircraft V1.6.0.0 utility
  VGA driver (intel 915gms) V6.14.10.4267 (LOGO)
  DLA V4.95BUILD490B69B
  InterVideo windvd 5.0B11.475 - I0203
  driver software DVD - ram V4.0.5.0
  V3.50.21 Toshiba fingerprint utility
  V1.01.07 hard drive protection
  Hotkey to display V2.8.0.0 - 00 - XP
  SMSC ircc miniport ndis V5.1.2500.0B device driver
  Toshiba V3.5.4 management console
  V8.02.05 warranty booklet
  manuals V5.16
  fix for 'update cumulative security for internet explorer' Q867282
  fix for "question in ole and com could allow remote code execution" Q873333
  fix for "question in hyperterminal could allow code execution" KB873339
  fix for "vulnerability in server message block could allow remote code execution" Q885250
  fix for 'problem in the kernel windows and lsass' KB885835
  fix for "issue in wordpad could allow code execution" KB885836
  fix for "cannot use infrared port to transfer data" Q885855
  fix for 'windows firewall only my network (or subnet)' KB886185
  fix for 'the asp.net path validation vulnerability' Q886903
  update security for windows messenger Q887472
  fix for "vulnerability in hyperlink object library could allow remote code execution" Q888113
  fix for 'vulnerability in windows could allow information disclosure' Q888302
  material (dep) - active computer may quit unexpectedly after recovery from sleep mode or hibernation in windows xp service pack 2 Q889673
  fix for "a vulnerability in the windows shell could allow remote code execution" Q890047
  fix for "issue in html help could allow code execution" Q890175
  fix for "a vulnerability in the dhtml editing component activex control could allow remote code execution" Q891781
  mobile extensions V3.72.00.XP
  SM2151ALD02 Toshiba software modem
  driver lan (10/100/1000 lan 88e8036) Marvell V7.29.4.3 (LOGO)
  V2.00.05 password utility
  PC V3.1.0 diagnostic tool
  V7.05.06 energy saving
  Save now V7.22 BUILD720B80V
  V1.0.1.1B SD memory boot utility
  Format card memory SD V2.0.3.0
  secure module SD V1.0.2
  SoundMax integrated digital audio V5.12.01.5240U3
  Sun java runtime environment 2 V1.5.0
  Touch and the launch of V1.2.7.0
  V6.0.304.6 Alps pointing device driver
  Press the start/stop utility V2.05.00
  module Infineon trusted platform module V1.70.154.0
  Infineon trusted platform module utility V1.70.0182.00
  utilities V4.30.07
  V2.0.0.5 wireless keyboard shortcut
  wireless network card mini pci Atheros ar5001x V3.1.2.45.I120
  utility V2.0.0.20A zoom

• Portege R200 - how to replace the HARD drive

  Fundamental questions about the Toshiba Portege R200 (purchased model birthday Thailand August 2005) are:
  (1) Please provide instructions to remove the hard drive (non-functional) (illustrations if possible)
  (2) model has enough space inside for hard drive 2.5 inch? (Impossible to locate 1.8 inches and below, to get the results of [expensive] calls to Toshiba - of interest only)

  Background:
  (1) while 3 years warranty in force I trecked (expensive) of Malaysia in Bangok (where to buy) at the headquarters of Toshiba (if you know Bangkok taxi drivers, you'll know what a test or going around in circles and the nonsense in the fire that was)... Toshiba agreed HD vibrating but reported would take 3 to 10 weeks to get the HD replacement (!?)
  (2) I was a few weeks later to the r - u (to tie)... They told me they couldn't help; I "should contact my provider...". This is an Asian model, in Europe, we cannot... etc etc.
  (3) a week later the HD has no
  (4) I contacted Toshiba but they told me the warranty expired 7 days before...
  (5) since this time I phoned and was put on hold for Toshiba in the region of London (several times), Singapore (3 times), Thailand (well, if you know how it goes, say-no more, shots of elbow-boost)...

  I got nowhere. But were invited by the media to bring it to the headquarters of Thai (yet)... It's all right, I'll book a flight and hotel etc now, shouldn't cost all that much more than the computer cost me initially...

  Oh, another thing, not very important: to help out me, I bought a lighter machine at Toys R us... 300 quid... for the love of antiquity I always want to get the old dog to this shiny Silver Anniversary edition slim R200 works again...
  I have a 2.5 "HD available (recond and costs all 9 quid in Brummagem) but before I destroy the old R200 dog by ineptitude... (and lost to carefree annoyance no assistance of Toshiba)... and/or on how to remove HD, please?

  Hello

  I have seen words about your question.
  AFAIK the R200 was equipped with the utility of the HARD disk protection. It is a feature to reduce the risk of damage to the HARD disk.
  Using the acceleration sensor built into the computer drive HARD protection detect vibrations, shocks and sings in the computer and automatically moves the HDD Head somewhere course, in order to reduce the risk of damage.
  But this function does not ensure that the HARD drive will not damage! It reduces the risk of damage!

  However, the HARD drive can be removed very easily.
  At the bottom of the unit, you will find the HARD drive Bay. It s close to the battery (on the left).
  You need to remove two screws to get access to the HARD disk 1.8.

  PS: You can use disks hard only 1.8. The 2.5 hard drives are not compatible.
  I discovered that you can use a TOSHIBA 60GB 4,200 rpm 1.8 HDD HDD1544BZK01

  Welcome them

• Portege R200 - re - install Windows XP

  We just took delivery of a Toshiba Portege R200 as an assessment
  Especially the small size Toshiba laptops. We bought from another manufacturer
  laptops in the past, but these come (strangely) with PCMCIA slots so that we cannot use
  Vodafone 3 G/GPRS cards.

  Anyway, this isn't the point. As seems to be the case with modern
  manufacturers, the laptop is loaded to the top with all kinds of garbage (sorry useful)
  utilities) which we certainly do not want! So we want to re - install plain
  Windows XP Pro vanilla and from there - we have our own build
  Configuration.

  Apart from the laptop doesn't come only not with a CD/DVD drive.
  It came only with a "recovery CD". What is this recovery
  Contain CDs? What is a Windows XP Pro installation CD or an image of the laptop with
  all the useful stuff already installed. So late, how should we do
  get a CD-ROM of relocation? I guess it's an OEM Windows XP Pro
  license there.

  Thank you, Rob.

  [Edited by: admin on 1st June 06 21:31]

  Hi Rob

  Recovery image contains the operating system, all necessary drivers, Toshiba designed tools and utilities (;)) very useful utilities and some applications such as WinDVD or even antivir program.) If you use recovery media that you will have factory settings as after the first start.

  In my opinion, you should preinstall unit with media recovery because on this path, all hardware components will be perfect set up. After that, you can remove all the stuff that you n t want.

  Otherwise, you can install your own operating system by using the Microsoft full version CD, and then install all the drivers only. You have them on CD tools & utilities, or you can download them from the download page of Toshiba. All that s!

  If you have any other questions, please write again.

  Good bye

• Portege R200 Win2k drivers?

  Our company OS is Win2k SP4 so this installed on Portege R200 PPR21E but has 2 unknown devices, showing in DM in Intel 82801FBM LPC I / f suite and system compatible ACPI Microsoft and also 'Ethernet controller' even if the Yukon LAN device is installed and running so I guess it must be the Wlan a, although Ive tried what it points to all the drivers wlan for this model to no joy. Ive tried all the drivers from the Tosh site but some installation for XP usually not w2k. Ive tried the Intel Chipset utility to no joy. Anyone got any ideas? It is possible that this model is not compatible W2K?

  Hello

  The Portégé R200 is designed for Windows XP, so it is fair to assume that some problems may occur when you run W2K. However, if you are looking for drivers for version PPR20 of the R200 downloads Web site, you will find the drivers and utilities for W2K. It might be interesting to try some of these forums that you have problems with the devices.

  Also, did you follow the order of installation of drivers properly? Some weird issues can occur if this is not the case. Yet once, order for W2K is listed when you are looking for the version of PPR20 (classified "Instructions of Installation").

  Willow

• PCMCIA question on portege R200

  PPR20A Portege R200 - recently went to Toshiba service for problem with network LAN card, came back LAN network card works fine now (lost packets previously). Running XP Professional SP2.

  Now have a problem with installing an Aircard card in the PCMCIA slot - before taken in charge worked well, but since then have not been able to install properly. Have consulted widely with the seller, the drivers updated and the device firmware (camera works very well in other laptops). Restored the operating system and recovery applications.

  The Manager of active devices and shows that the pcmcia adapter is generic type (for example, Microsoft). Uninstalled the generic driver, downloaded and installed the drivers from toshiba but install is not to recognize the new drivers and Hardware Wizard adds a driver credits back.

  What Miss me?

  Have updated the BIOS to V1.6, verified status all drivers and all are up-to-date.

  It does not compute...

  Someone has an idea?

  Post edited by: scott.giles

  Hey Buddy,

  If you have already done everything to make this thing work, then you should contact the service center where you sent your machine before and tell them that your pcmcia/cardbus is working properly.
  But before that, try this:
  Download linux live-cd like knoppix, boot your computer with the cd and check if the same problem under linux. I mean if the card is not properly recognized. Usually, the card must be recognized and you should be able to use your wireless card (I guess Aircard means wireless card)

  If the card works then backup all your data on your hard drive and recover you your machine. After recovery, everything should work again.

  Welcome them

• Question about the feature keys FN on Portege R200

  Hello! My laptop is a Portege R200

  I cleaned up my HARD drive and installing WXP Pro

  I downloaded all the drivers for the Toshiba site R200

  Now the problem is that there are two kinds a change of the device driver display

  I installed the first called TDspBtn and now I am able to get the LCD, LCD + CRT or CRT by pressing Fn + F5. I do not like this feature because theres no icon displayed as brightness oder speaker power.

  The other is TFnF5. If I click on it, nothing happens and the function FN + F5 is still the TDspBtn.

  ------------------------

  My next prob is the FN + F8 combination. I installed the driver from wirlesshotkey and nothing happens if I press FN + F8
  Normally using this utility you can switch of Bluetooth for wireless connection by pressing Fn + F8. If Bluetooth is not available, it will turn on and outside wireless lan.

  Please help me!

  Greetings from the Germany

  Hello

  It is not easy to give you the right answer because this FN feature does not depend on a tool only. The fact is that several separate components must be installed correctly.
  On the Toshiba download page, I saw that there are two different models of the Portege R200. I don't know which you have, but for each of them you will find the document Instructions facilities with the exact order of installations.

  So what you need to do is to install all the drivers, tools and utilities following this order of installations.
  If all the components must be installed correctly. After doing this, all these processes are running in the background and you can use all the functions FN.

  The same situation is for the FN + F8.

• Portege R200 - Display driver for Windows 7

  I upgrades the operating system on my Toshiba Portege R200 to Windows 7

  TThe BONE determined my monitor as generic, it does not allow more than display settings. I think I need to replace the driver. Toshiba has no update driver for this model

  Is there any equivalent elsewhere, or with toshiba under other models?

  Hey,.

  I agree with you, santhi_G. I checked the site Web of Toshiba Portege R200 drivers and there is no available drivers for Windows 7 or Vista same. Only XP and Windows 2000 is supported. :(

  I discovered that the Portege R200 Intel graphics so probably has that you can find a driver directly on the Intel Web site. It's worth a try ;)
  [www.intel.com]

• Portege R200 - 2.25 GB RAM upgrade possible?

  Hello

  Is it possible to upgrade a Portege R200 to 2.25 GB RAM? I read the card, but I still don't know if it will work or not, for example with piece of Kingston (KTT533D2 / 2G).
  Someone at - he experiences?

  Best,
  Phil

  See this page:
  [Memory for Toshiba Portege R200 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=14191&ft=m&st=3]

  You can see that you can improve protected R200 to 1.25 GB
  There is a 256MB module, which is not removable!