Readers of XP for dv5-1004nr

Similar Questions

• dv5-1004nr; an mSATA or m-PCIe slot?

  I recently received a dv5-1004nr from a friend. When I took part to clean it, I noticed that she had slot mSATA or micro-PCIe that was empty. I can't find any documentation on what is this machine slot. If possible, I'd like put an mSATA SSD inside.

  Can anyone confirm if it works, or what is this port?

  Thank you

  Hello

  Check the diagram below, but I think that the slot you are referring to is for the this Tv Tuner card in some models dv5-1000 - if this is the case, it can only be used for this card.

  

  Kind regards

  DP - K

• dv5-1004nr, Windows 7 x 64, no sound, please help

  I installed Windows 7 Ultimate X 64 on my computer portable pavilion dv5-1004nr. Everything has been working great until overheating lead to black screen. I bought a new motherbaord (claimed again) on eBay and installed.  It seems to work except no noise and touchpad don't right click button does not. It is solid when you use the headset, but no sound from computer speakers. The laptop can produce a strong sound signal, so the speakers should work. they worked before. The waterproof touchpad click the button does not work. When the computer has started, click the button left touchpad behave like the right button. After awhile, the left button becomes normal.

  Help, please. I spent a lot of time and everything else I have tried.

  I have fixed my sound.  Infrared connection cable Council/plug headphones to the motherboard has been damaged by inserting several times. I used a toothpick to smooth wire tangled and damaged and prevent their touching each other. Now I got his back... I hope my experience can have use for others. I want to thank everyone here for your help and your support.

• J8B65PA: Readers of Bluetooth for Compaq hp 15-s006TU with Windows7 64 bit laptop

  Hello

  I recently bought 15-s006TU hp Compaq laptop. I could get most of the readers, but bluetooth and USB readers are not correctly installed. Could someone help me rgarding it.

  --

  Kilo

  Hello:

  You need this driver bluetooth for the Ralink WiFi card.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147890_1

  If the pilot USB3 support for your laptop and driver page did not work, then try one directly from Intel.

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-series-and-C220-C610-chipset-family

• Dv5-1015nr: need graphics driver for nVidia GeForce for DV5-1015nr (Win7)

  I upgraded my laptop DV5-1015nr (x 64) from Vista to Windows 7 but am unable to find a driver for Windows 7 64 bit video. The relevant HP support page does not offer one for Win 7 (wow!), or not nVidia (hard to believe). I tried a few packs of series of other sites but none the GeForce 9 M were compatible. It's very disappointing. Does anyone know if or where I could find a driver for the nVidia 9200M GS graphics card / 9600M GT for my laptop DV5-1015nr?

  Djard

  Install the driver from the nVidia page

  First, install all Windows Update

  the last driver hp 7 November 2008 http://ftp.hp.com/pub/softpaq/sp41501-42000/sp41543.exe

• Replace or upgrade the farm for dv5-1223TX

  Hi, the battery of my laptop does not work any more (HP Spare 484170-001), wonder I should replace it with the same model of battery or should I update, if I want it to last for at least 2-3 hours?
  dv5-1223TX
  Pavillion dv5
  CNF9021B5S
  M517PA N #ABG

  This is a 12 "compatible" cell that should give you a better run time. It is not genuine HP, but for older laptops I generally find these "fakes" to be very good.

  http://www.eBay.com/ITM/12-cell-battery-for-HP-Pavilion-dv4-dv5-DV6-G50-G60-G70-Presario-CQ45-CQ40-CQ50-/390648413723?PT=Laptop_Batteries&hash=item5af475be1b

  True 12 cells:

  http://www.eBay.com/ITM/new-HP-original-KS526AA-12-cell-high-Cap-MultiCharge-OEM-battery-gauge-light-/191211130673?PT=Laptop_Batteries&hash=item2c85124f31

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Noisy fan on a HP Pavillion DV5-1004nr

  It's my computer: HP dv5

  I only got about 2 weeks ago and the fan was perfectly silent, except when the CPU usage was around 80%. A few days after getting it, I tried to switch to Ubuntu (Linux). The fan has started to get a little stronger and a lot of things were not working well, so I decided to go back to Vista 64-bit. The noise of the fan declined, but it is still much stronger than when I got it, even when the CPU is less than 10%. How can I fix? Thank you.

  Just in case anyone else has this problem, I answer to say what was wrong.

  I walked up to the House of my friend and plugged my computer directly into a socket, and he was perfectly quiet. So when I went back to my room, rather than plugged into the surge protector, I plugged it directly into the wall and it didn't make a sound. For some reason, the surge protector was either too much or too little power to the comp and the fan was in overload. Whatever the reason, it's on. So if anyone else has this problem and nothing seems to work, try to plug it into different places.

• Advice on replacement inverter for dv5

  I'm doing auto repair of the screen for a dv5.  Right now I'm stuck trying to remove the inverter and disconnect one of the connectors.

  How can I remove the inverter?  It seems to be locked in a rectangular plastic tube.  When I try to shoot the rectangular plastic case, it does not move.   I don't see any obvious screws to take off.   The inverter is glued inside the showcase?  I'm afraid that if I pull too hard, I'll break something.

  All manuals repair says is 'delete the ups '.

  Second question was the inverter.   Y at - it something special or technical to disconnect the cable from the display of the inverter Panel?  The connector is very low.  I have a hard time getting handle on the part of the white connector.

  Any advice will be appreciated.

  Jim

  I assumed your dv5 series dv5-1200 with Intel.

  .

  http://h20574.www2.HP.com/results.htm?SID=3744212&MEID=24CD9F09-2C3A-405B-AA48-1FEC1CB88DE5

  .

  Select the (built-in) ups on the left side of this Library Media Service HP dv5-1200 (intel cpu). It should appear procedure video and text for you to remove the inverter.

  .

  Have fun.

• readers of m2 for Alienware 17 2015 edition R2

  Hello

  Thinking to replace the 1 TB drive mine with an M2 or to work at the same time. What m2 readers don't you guys have installed which are confirmed work? I understand that crucial step made one as well as Samsung and readers must be 2280/sata.

  There are 4 locations SSD m2. Make sure they are SATA based and NOT PCIe based. Make sure they are 22 x 80 x 2.4 mm in size. the option of 128 GB of Dell is the Samsung PM851 m2, but Mr. MX200 Crucial 2 are confirmed working as well as of the 530 Intel. Make sure they are 22 x 80 x 2.4 mm in size, or what they call 2280 Type...

• Drive recovery for Dv5 1104tu

  Hi, have a hp pavallion dv 5 1104tu. a month back I had a problem with the hard drive and my hardsik replaced service center, but the problem is that my drive which i recived is equipped with a free back but my earlier hardsisk was loaded with vista basic and database software.

  I want to go back to factory settings. but my recovert cd dosent work here.

  so please help me to get my vista of the Moose and the pre loaded software.

  What happens when you try to use your recovery discs?

• (Redirected) What readers to buy for my OptiPlex 755 video card

  I just bought a Dell OptiPlex 755 of Micomp and he has a really bad video card. I wonder what are my options here

  My computer (from newegg.com) record:

  Operating system: Windows 7 Home Premium / processor Type: Core 2 Duo / GPU/VGA Type: Intel GMA 3100 / memory capacity: 8 GB DDR2 / HDD: 250 GB / speed CPU: 3.00 Ghz

  Learn more about the DELL Optiplex/C2D / 3 GHz

  Model

  Brand

  REFERENCE DELL

  Model

  OptiPlex/C2D / 3 GHz

  Info Express

  Type

  Computers in business desktop & Workstations

  Form factor

  Desktop

  Its use

  Company

  Operating system

  Windows 7 Home Premium

  CENTRAL PROCESSING UNIT

  Type of processor

  Core 2 Duo

  Processor speed

  3.0 GHz

  Graphics

  GPU/VGA type

  Intel GMA 3100

  Memory

  Memory capacity

  8 GB DDR2

  Hard drive

  HARD DRIVE

  250 GB

  Optical drive

  Optical drive type

  DVD-ROM

  Display

  Screen size

  No screen

  Audio

  Audio chipset

  Integrated

  Communications

  LAN Chipset

  Integrated

  LAN speed

  10/100/1000Mbps

  Front panel ports

  Front USB

  2

  Front Audio ports

  2

  Rear panel ports

  COM

  1

  LPT

  1

  Video ports

  1 VGA PORT

  Rear USB

  6

  RJ45

  1 port

  Rear Audio ports

  1 x headphone jack, 1 x Microphone, 1 x line

  Manufacturer warranty

  Parts

  1 YEAR

  Labor

  1 YEAR

  Loading...

  I need a 1 GB video card to run gmod. y at - it good cards that I can use

  Better to post this thread in the Forum video Desktop, here:

  http://en.community.Dell.com/forums/3515.aspx

  Bev.

• Envy 15-u000na: no network driver, no working USB flash, no CD/DVD drive after downgrading of 10 for Win7 Pro 64

  Please can you help me - I turned my cell phone Envy in to an expensive paper weight, after (below) the upgrade of Windows 8.1 at 10 - I hated it and decided that I must return to 7Pro as I want to join the domain and want to install VMware etc.

  I made the plunge and left me without back that all the important factors are missing, including USB, NETWORK interface integrated hubs & wireless - the machine has no DVD player and it won't recognize not flash or SD - ports USB card readers but work for dongle wireless keyboard and mouse.

  Not too sure where to go now - any ideas?

  Model 15-u000na

  P/N J1W92EA #ABU

  Hello:

  There are other drivers you need...

  Wireless:

  This package contains the installation package driver for wireless LAN Qualcomm Atheros AR9000 controller series in the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp70501-71000/sp70859.exe

  You will need this bluetooth driver for this model of the wlan card.

  FTP://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69230.exe

  PCI device: 1 driver on the list from the link below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Series 8 Intel xHCI HC - 31 9: download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

  PCI Simple Communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71258.exe

  ACPI\HPQ6007:

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

  ACPI\INT33A0:

  This package provides the driver for Intel Smart Connect technology for the laptop models running a supported operating system. The driver for Intel Smart Connect technology allows the system to exit the sleep mode and web update supported applications such as electronic mail. The system enters sleep once the update is complete.

  File name: sp68943.exe

  ACPI\ACPI000E: The device missing the driver's ACPI wake up alarm.

  After several attempts to scouring the internet, I found the file that I attached below.

  This is the ID of the material shown in the file of configuration information...

  [Manufacturer]
  STD % = AcpiTime, NTamd64

  [AcpiTime.NTamd64]
  % * ACPI000E. DeviceDesc % = AcpiTime_Inst, * ACPI000E

  Download and uncompress the file in its folder.  Do nothing with the 2 files in the folder.

  They must be installed manually as follows...

  Go to Device Manager and click on the (unknown) device of ACPI\ACPI000E who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected, and I hope that the driver will be installed.

  Then restart.

• Pop-up ads continue despite all the information here regarding remove them.  I think they were watching when I downloaded an update for Adobe Flash Player.  All of the suggestions!

  I use OS x El Capitan 10.11.2 on my 3.2 GHz, 8 GB Mac.  I keep getting the pop - ads that those scam ads reply and get their malicious software solution.  I also get the help line 'Apple' where someone's endearing supposedly walk me if they can help.  I tried all of the solutions in the Apple support groups, but nothing has worked... remove extensions (don't have), in order to put the files listed in 'Go to Folder' (none came, so I couldn't remove them).  Any ideas?  It seems that it got worse after I received a notice to update my Adobe Flash Player... maybe a false update.

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Pavilion dv5-1058eo: pavilion dv5-1058eo specifications

  I can't find the specs for this specific unit. The research process proposed in the HP support page gives no other reference than the general maintenance for dv5 manual (I tried the American site both the Swedish site, bought in Sweden). I am looking for the specific motherboard specifications and there are several options listed in the manual (which none does lend itself to the process proposed by the HP support page to find his card).  I think I can find the actual part number but the HP site for this search does not work

  Hello:

  The HP part Surfer recommendation that Erico post will give you the processor information you are looking for...

  http://PartSurfer.HP.com/search.aspx?SearchText=FP673EA

  You can also refer to Chapter 1, page 1 the Guide Service and Maintenance on your laptop support page for a list of all AMD processors supported...

  http://support.HP.com/us-en/product/HP-Pavilion-dv5-entertainment-notebook-PC-series/3744188/model/3767356/manuals

• HP LaserJet 1100 printer: HP LaserJet 1100 driver needed for laptop with Windows 7 Starter operating system

  Hi - I can't find the HP LaserJet 1100 driver for a netbook Samsung Win 7 Starter OS. All that said it should be in the distribution of Win 7, but it is not in the package of Win 7 Starter someone can tell me where I can get this driver?

  TIA,

  Mitch

  Hi Mitch8,

  Have you tried to install drivers for your printer InOs. Here is the screenshot how to add a printer.

  1. Go to the device and printer, click Add a printer-> select Add a local printer, and then click Next.

  

  2. Select the existing port of list (printer port virtual USB or serial port depending on how the printer is

  connected to the Pc and click Next.

  

  3. in the production list, choose HP and on the list of the printers section search HP LaserJet 1100 (MS) in the list and click Next
  to install the driver of InOS.

  Note: If not HP LaserJet 1100 (MS), and then click Windows update and allow while it updates the list of readers
  then look for HP LaserJet 1100 and click next to install the drivers

  Note: you must have Internet access to download drivers INOS

  

  I hope this helps you!
   
  Make it easier for others to find solutions, if my post has solved your problem, please mark as "accepted solution".
   
  +++ Say thank you by clicking on the star of congratulations in the post.
   
  Although I am an employee of HP, I speak for myself and not for HP.