HP LaserJet 1100 printer: HP LaserJet 1100 driver needed for laptop with Windows 7 Starter operating system

Similar Questions

• need to drive replacement for xp media center edition 2005 operating system

  Computer crashed. active hard drive & ok. virus taken flight. Computer came with XP Media Center 2005 and Office already installed. It's a HP Pavilion. HP sells more spare parts because it is more than 5 years old. Where can I find an another disk operating system? Don't want to lose Office. Not too worried about anything else.

  burn the Hiren s cd in order to get at least to the desktop, you need to do is to look at the drive in disk management and see if a second partition is listed on the player, that would be the recovery partition.

  If a recovery partition is not displayed, you can use hiren to repair the registry:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-missing-or-corrupt/a1cf7ecf-e6c8-4546-AB88-f0e5abde7a13?msgId=52ff9278-5721-4B37-8887-700e274493b8

  read the response from Wunders for instructions on repairing the registry hive.

  But first traveled with the parameter/r hiren checkdisk, instructions are in my reply with download the hiren.

  EDIT:

  http://www.faultwire.com/solutions/using_system_restore_xp.php

  Here's a site with pictures on using the recovery console to repair the registry scroll down to the section for the recovery console

  Here are the instructions to burn a bootable cd with the recovery console, you do not have installation cd.

  Here's how to make a bootable xp recovery console cd

  Courtesy of JoseIbarra

  You need start by booting in XP using a CD Recovery Console, you can do (no XP media required) and run a chkdsk with error correction command enough times until it is clean and if it does not, you can create a new boot.ini file (this is usually one of two things).

  Here's how:

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  RC. ISO

  Download the ISO from here:

  http://www.thecomputerparamedic.com/?p=8    (courtesy of Daavee)

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient. If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  you will need to burn the cd from a working pc

• Update portable drive to SSD, problems with the installation of operating system and recovery system

  Compaq Presario CQ71, (model CQ71-317EA) portable system, Windows 7 family 64 - bit edition

  Hi, I tried to upgrade the original 320 GB HDD to a 256 GB SSD.

  After that replacement of the naked NTFS hard drive to SSD format, I tried to do a "factory restore" using the DVD, I created some time ago about recovery. The DVD started and recovery program ran very well, first menus for recovery/system control etc. The problem is that the program would not be allowed a resumption of the plant as the HDD was little different/more than the installed hard drive to factory.

  This is the point I'm stuck at, I reassembled the original hard drive while I find a solution.

  Is it possible to find a workaround to avoid having to order a new disc of Windows 7? Any help and advice in terms of simple-ish would be greatly appreciated. Thank you.

  Bagpuss

  Hello:

  If you can still read all 25 characters of the product key of W7 on the bottom of your laptop, you can make your own plain W7 x 64 Home Premium installation media and use the product key to activate the installation.

  Download the applicable version of the W7 from the link below.  Use the SP1 media files regenerate.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page59?p=470600&viewfull=1#post470600

  Then use this tool to transfer the ISO file downloaded on a key USB 4 GB or DVD.  The tool will make the DVD or drive bootable flash as well.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• Installed new hard drive on laptop with Windows 7 can install Windows XP on external hard drive and plug it into USB?

  Original title: Win7 Pro + HD Ext different OS
  I just installed a new hard drive in my laptop with Windows 7 Pro 64 bit.
  Would it not be possible to install WIn XP or Win 98 + older software (Win 98 or XP) on an external hard drive, then plug it into USB, laptop, in order to run old programs of 16-32 bit?

  It would be best to run Windows 98 or XP in a Virtual Machine, if you need to run older programs.

  You can use a free software such as Oracle VirtualBox or VMware Player:

  Sunny Random Ramblings: installation of Windows 98 in Virtual Box

• I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?

  Also, where can I find a list of compatible printers?

  Hello

  You can use the Windows 8 Compatibility Center to find out if a device is compatible.

  Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
  http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/home

  FAQ - Windows Compatibility Center:

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ

  Concerning

• I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  I have windows 7, my HP deskjet printer does not print the colors I changed to another laptop with win 7 = no colors which, in windows 7 64 cause3s this

  Display uppercase makes reading difficult.

  Have you checked the printer properties settings?

  It could also be due to a problem with ink cartridge

  Used HP diagnostics or printed the test page for HP?

  Its nothing to do with win7 the printer settings are taken from the printer to the driver

• I cannot keep Adobe Acrobat as my default printer my Windows 10 Pro operating system.  Whenever I restart my system, it is by default in the desktop printer.

  I cannot keep Adobe Acrobat as my default printer my Windows 10 Pro operating system.  Whenever I restart my system, it is by default in the desktop printer.

  One of the possibilities for your deliverance is a questionable feature on by default in Windows 10, changing your default printer to be everything you've printed on last.

  Go to the Windows 10 Settings of the PC and from there, select Printers & Scanners. Note the option to Let Windows manage my default printer. Make sure that this option is set to Off which is not the default. Once you set this option to Off, then set the driver Adobe PDF as a default. Windows hide more with her!

  -Dov

  PS: Yes, it's dark and a pain, but Adobe had no permission in this option and cannot turn by if or turn off!

• Windows XP LAN driver needed for my Satellite A100-784

  I bought the Satellite A100-784 with Windows Vista. I removed Vista and installed Windows XP (taken from another non-Toshiba notebook)) and then SP2. Now I can't use internet because there is no LAN driver. The drivers downloaded from the Toshiba site do not work.

  Any solution for me? I expect other problems popping up soon, with the sound and so on. Is there a driver for this model with WinXP pack?

  (I would be very happy to get a drive of fast food with Windows XP in English, but customer will not provide any).

  Hello

  Your unit A100 belongs to the PSAANE series.
  Toshiba European Web site offers two versions of driver XP Intel Lan:

  1 Intel LAN driver 8.0.43.0
  2 Intel LAN driver 9.2.24

  The first 8.0.43.0 has been designed to Pro100 LAN and the other for LAN Pro1000 9.2.24

  In addition, I would recommend following the guidelines described in the installation instructions! The drivers must be installed in the correct order.

  Please also take a look in another thread on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24125

• Please help me find... Compaq presario f762au driver sound for 32-bit Windows 7.

  Please help me find... Compaq presario f762au driver sound for 32-bit Windows 7...

  Hello

  It makes no sense at all. Based on its support page, it uses "Driver Conexant HD-Audio SmartAudio 221" for Vista

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3689060#N189

  and now, he can not see for Windows 7:

  https://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-75899-1

  Please, try the following methods:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  http://support.HP.com/us-en/document/c01912228
  

  Kind regards.

• What is the printer that HP 7525 works with the windows 8.1 operating system?

  What is the printer HP 7525 Photo Smart works with the windows 8.1 operating system?

  Hi Alex7171,

  Yes it does, you can follow this link to download drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=5286643&I

• Could not map the drive from external hard drive to the new computer laptop with windows 7-64 bit

  I just got a new laptop with windows 7-64 bit.  When I try to map a drive on my external hard drive, it tries to connect but then returns the message "the network path was not found" I even tried to use the ip address.  The external drive is turned on and I can be mapped to other computers in my house.  When I click on browse in the drive, network adapter, and then click the network folder window, I see that what's on my pc.

  Hi katnoir,

  Follow the steps described in the links:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-network-error-code-0x80070035-Windows/84791143-B70a-4EC2-B700-98df657fe45c

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/Windows-logon-unsuccessful-during-map-network/055d61a5-00d0-4798-9e98-66e6ba0726de

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/ErrorCode-0x80070035-the-network-path-cannot-be/d2debc9c-afbb-497c-A0D8-a3e4e0137061

• just formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded

  I formatted my hard drive and xp wouldn't charge b/c he didn't see the hard drive. I then installed Windows 7 starter and cannot be upgraded. .

  Probably, you need to boot in the BIOS of the computer and changed on the hard drive in IDE mode, SATA, so it can be recognized by Windows XP.

  Before that you plan to replace Windows 7 with Windows XP. Have you tried to familiarize yourself with the operating system first?

  http://techingiteasy.WordPress.com/2009/08/19/for-the-former-Windows-XP-user-welcome-to-Windows-7/

  If you want to run Windows XP, you can consider to dual boot Windows 7 and Windows XP. You first need to know if your computer is compatible with Windows XP. Much more modern computers are gradually support for Windows XP.

  How dual boot Windows 7 and Windows XP
  http://notebooks.com/2011/02/01/how-to-dual-boot-Windows-7-and-Windows-XP-Part-1/

  With Windows XP installed first:
  http://notebooks.com/2011/02/17/how-to-dual-boot-Windows-7-and-Windows-XP-Part-2/

• Intel USB 3.0 eXtensible Host Controller Driver is not compatible with Windows 8

  "" I am currently running windows 7 and was about to upgrade to windows 8, but the upgrade of Windows 8 Wizard says that "Intel® USB 3.0 eXtensible Host Controller Driver is not compatible with Windows 8 '. Is there any solution for this? How to install the drivers USB 3.0 for windows 8? Should I uninstall the drivers before updating?

  Help, please

  I thank in advance

  Hi badesha99.

  I'm glad to know that you've posted on the forums of Windows 8.

  I suggest to uninstall the driver and upgraded to Windows 8.

  USB 3.0 driver Windows 8 has native box, which is automatically installed after upgrade to Windows 8.

  See the mentioned link below for more information.

  http://www.Intel.com/support/chipsets/USB3/sb/CS-033870.htm

  Hope the above information helps and let us know the question in your next post.

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom

• Install the Windows Server 2008 operating system on drive D:

  Hello

  I have a requirement to install Windows 2008 R2 operating system on drive D:. Please advise me if it is possible and how. Thank you.

  Kind regards

  Kamran7446

  Hello

  You can now create the D: Disk Manager partition and run the installation while Windows is running. Just point the partition D: and after installing, you can start the just installed Windows and remove and recreate the C: partition.