Reading and videos jumps up and down regularly and thoroughly

Similar Questions

• While trying to read, a video, I get a message 'Windows Media Player stopped working' and cannot continue

  How to fix windows media player... Read message videos... "Windows media player has stopped working", so I can't play the video. I can play music, however.

  Michael

  Hi Michaelgdr,

  1. the problem occurs with all videos?
  2. What is the file format of you play it?

  I suggest you to reduce hardware acceleration for windows media and (if supported) graphics card player

  I suggest you to make Windows Media Player as a default player.

  You can also change the hardware acceleration and check.

  Try to reduce (or turn off) video hardware acceleration by doing the following

  a. open Screen Resolution by clicking the Start button, click Control Panel, and then, under appearance and personalization, clicking
  Setting screen resolution.

  b. click Advanced settings, click the Troubleshooting tab and then click change settings.

  Note that some video card drivers do not allow allows you to change the settings.

  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.

• Hi, my camera and video images are upside down, how can I solve this problem

  Hi my camera and video images are upside down, how can I fix this problem

  If it is in Windows (live) Photo Gallery, select the pictures that are backwards, right click, then select rotate (in the clockwise or counterclockwise). repeat if necessary. teengeek.freehostingcloud.com

• BlackBerry smartphones, I need my blackberry 9630 to read web video and download video

  I need my blackberry 9630 to read web video and download video. Right now I can't do it right. Can anyone suggest some plug-ins etc. ?

  Hi and welcome to the forums!

  Video game web depends on the type of video file. See the link attached for supported file types.

  Can you post an example of the video link, you can not play, I'll help you test.

  Thank you

  Bifocals

  Reference guide for Media Types supported on BlackBerry Smartphones.

• With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  Hello

  Here are the steps.

  Install a cable Audio virtual on your machine:

  http://virtual-audio-cable.en.softonic.com/

  Under HW Audio Configuration configured Virtual audio cable as default input device

  And value clock maser virtual audio cable and try reading.

  This issue with the message 'Audio material e/s overloaded at 00' can be fixed, follow these steps.

  Vinay

• Windows 7 RTM fingerprint reader and webcam for TX2 driver status

  I read somewhere on the site of HP windows 7 drivers for this TX2 - 1027CA won't be available until October 2009. Still I use it now, and the main system works well. There is a problem in the fingerprint reader and perhaps the webcam for me at this point. Until that HP provides drivers updated, I was wondering if there may be versions beta drivers for the TX2 I could try. I am ready to continue using windows 7, but I would try to install the drivers updated as soon as possible. Maybe it's two months away and one month after the availability of the operating system for MSDN subscribers (several companies and developers). I guess this list of reading, some other people who have found what is and is not possible on the TX2 today under 7. Could you give us a brief run down on what drivers are working or not working do not? Fingerprint reader and webcam are of great interest for beginners. My goal is to run what can work.

  The WebCam driver installation is not necessary. You can use the MediaSmart WebCam software to test

  Link: ftp://ftp.hp.com/pub/softpaq/sp43501-44000/sp43591.exe

  Driver fingerprint (beta):

  32-bit: http://win7beta.authentec.com/W7Wbf32.exe

  64-bit: http://win7beta.authentec.com/W7Wbf64.exe

• Satellite M30X-165: Mat * a UJ - 831 S is not read and write any DVD

  Hello

  the next problem is sticky on the laptop Satellite M30X 165 with the burner Mat * a UJ - 831 S: it can read and write CDs, but is not able to write them to DVD or even read some of the ones I've burned and also read in the same drive. Even at the start of the DVD, it does not start from the recovery DVD, the player starts and slows down very quickly.
  Without doubt, it must be put at the service of repair or someone has other suggestions?

  Could you please tell me how long the repair takes (I know what it takes to install the desktop temporarily used).

  Thank you

  Post edited by: DerSeher
  Using burning software, it detects the DVD, but invite you to an "error of calibration power (037303).

  Hello

  If you cannot use recovery media, I guess that the drive is defective and must be replaced.

• Using the same interface CAN read and write

  Hello.

  Can I use the same CAN interface to read and write?

  For example:

  I send you CAN frame using CAN1 to my MCU.

  IF MCU confirmed the order of receiver it immediately sends the echo return command and there different ID to send the command.

  I tried to use CAN1 output framework and then reconfigures CAN1 to frame in queue and retrieve the frame of the echo.

  But it seems that I was always missing. The 'framework of CAN' kept vi expire.

  When I used the separator on the outlet BOX in my configured MCU CAN1 for frame and CAN2 for chassis in and I managed to catch the echo framework.

  I think about 100 ms for the frame in response that will be sent after the order has been received. It takes longer for the NI PXI-8513 reconfigure? Can I still do it, or I have to use the separator?

  I wad jump to use an interface to read and write.

  Thank you

  Ok. I misread your notion of echo. I understand now. I'm sorry.  The code you posted seems reasonable.

  (1) did you notice on or off for the session?

  (2) what baud rate? You can add a parameter of baud rates for the property to be explicit node.

  (3) I don't remember the name of VI, but you can add a status of Comm Get after reading. This will give you some information about the bus - if errors were detected, etc. Which can be useful to help debug.

• global variable functional to read and write data from and to the parallel loops

  Hello!

  Here is the following situation: I have 3 parallel while loops. I have the fire at the same time. The first loop reads the data from GPIB instruments. Second readers PID powered analog output card (software waveform static timed, cc. Update 3 seconds interval) with DAQmx features. The third argument stores the data in the case of certain conditions to the PDM file.

  I create a functional global variable (FGV) with write and read options containing the measured data (30 double CC in cluster). So when I get a new reading of the GPIB loop, I put the new values in the FGV.

  In parallel loops, I read the FGV when necessary. I know that, I just create a race condition, because when one of the loops reads or writes data in the FGV, no other loops can access, while they hold their race until the loop of winner completed his reading or writing on it.

  In my case, it is not a problem of losing data measured, and also a few short drapes in some loops are okey. (data measured, including the temperature values, used in the loop of PID and the loop to save file, the system also has constants for a significant period, is not a problem if the PID loop reads sometimes on values previous to the FGV in case if he won the race)

  What is a "barbarian way" to make such a code? (later, I want to give a good GUI to my code, so probably I would have to use some sort of event management,...)

  If you recommend something more elegant, please give me some links where I can learn more.

  I started to read and learn to try to expand my little knowledge in LabView, but to me, it seems I can find examples really pro and documents (http://expressionflow.com/2007/10/01/labview-queued-state-machine-architecture/ , http://forums.ni.com/t5/LabVIEW/Community-Nugget-2009-03-13-An-Event-based-messageing-framework/m-p/... ) and really simple, but not in the "middle range". This forum and other sources of NEITHER are really good, but I want to swim in a huge "info-ocean", without guidance...

  I'm after course 1 Core and Core 2, do you know that some free educational material that is based on these? (to say something 'intermediary'...)

  Thank you very much!

  I would use queues instead of a FGV in this particular case.

  A driving force that would provide a signal saying that the data is ready, you can change your FGV readme...  And maybe have an array of clusters to hold values more waiting to be read, etc...  Things get complicated...

  A queue however will do nicely.  You may have an understanding of producer/consumer.  You will need to do maybe not this 3rd loop.  If install you a state machine, which has (among other States): wait for the data (that is where the queue is read), writing to a file, disk PID.

  Your state of inactivity would be the "waiting for data".

  The PID is dependent on the data?  Otherwise it must operate its own, and Yes, you may have a loop for it.  Should run at a different rate from the loop reading data, you may have a different queue or other means for transmitting data to this loop.

  Another tip would be to define the State of PID as the default state and check for new data at regular intervals, thus reducing to 2 loops (producer / consumer).  The new data would be shared on the wires using a shift register.

  There are many tricks.  However, I would not recommend using a basic FGV as your solution.  An Action Engine, would be okay if it includes a mechanism to flag what data has been read (ie index, etc) or once the data has been read, it is deleted from the AE. 
  
  
  There are many ways to implement a solution, you just have to pick the right one that will avoid loosing data.
  

• Reading and saving data of two serial ports

  Hi, I googled similar questions in the forum, but I don't have an answer for my problem so I'm posting it here.

  I would read and record data of two balances throgh serial ports. I have a drop down menu in VI, I can choose the availabe ports on my pc. But it is still only one that works. So I only get one data scales them.

  I usually get to choose 6 ports, but only one of them works. So I'm wondering if this is something that has to do with my pc or the VI?

  I've attached a screenshot of my VI.

  Thank you =)

  
  

• Problem with digital I/o read and write in CVI

  I have a PXI with PXI 6225 Renault installed box. For some uses, I wired 4 lines of digital port 0

  for its 4 top lines so that the output digital on bottom lines can be read as a digital input on the top lines.

  In the CVI program I have set up two input and output of tasks as follows:

  Enter task:

  DAQmxCreateDIChan (digitalInputTask, "PXI1Slot5/port0 / line4:7","InputLines", DAQmx_Val_ChanForAllLines ");

  DAQmxCfgSampClkTiming (digitalInputTask, ' AI/SampleClock ", 4000, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 2000" ");

  Output task:

  DAQmxCreateDOChan (digitalOutputTask, "PXI1Slot5/port0 / line0:3","OutputLines", DAQmx_Val_ChanForAllLines ");

  DAQmxCfgSampClkTiming(digitalOutputTask,"ai/SampleClock", 4000, DAQmx_Val_Rising,DAQmx_Val_ContSamps, 2000));

  DAQmxCfgOutputBuffer (digitalOutputTask, 2000);

  I also started a task of analog input to ensure that the analog "IA/SampleClock" sample clock is running, and I check

  as I interpret the correct analog data of my analog lines.

  Here's the problem:

  I write 2000 identical samples of zero for the 4 lines (port0/$line0... (3) with the following command:

  DAQmxWriteDigitalU32 (digitalOutputTask, 2000, 1, 10, DAQmx_Val_GroupByChannel, sampleArray, & writing, NULL);

  After a while, I try to read the 4 lines (port0/4... (7) using the:

  DAQmxReadDigitalU32 (digitalInputTask, 2000, 10, DAQmx_Val_GroupByChannel, scanArray, 2000, & read_num, NULL);

  but the values returned in scanArray are nil!

  If I replace the digitalInputTask by digitalOutputTask in the above function call, I get the good samples rewritten

  (do not know how the 4 lines below that are configured in output mode can be read back! could it be just read buffer?)

  I don't know that the hardware configuration is correct, because when I try to emulate this feature in Labview, it works.

  (I use an output data acquisition assistant to write down the 4 lines of port 0, using a digital wave of entry, then)

  top reading 4 lines with the help of one Assistant DAQ to enter a digital waveform VI.

  In another test, I have 4 lines below in CVI, put on stop my CVI program, start a simple Labview VI to read from

  upper 4 lines and I can see the values I just write in CVI).

  Any idea what could be causing DAQmxReadDigitalU32 to read only zeros in CVI?

  I compared my settings in CVI with parameters DAQ assistant in Labview and tried to make them identical, but nothing helped.

  Thank you

  Try to use these examples to see if you can read and write in CVI

• Reading and writing a file

  I'm trying to read and write to a file so that I can store a string array and a double in my application, but I came out a few problems; Firstly when I put my path in the constant path he will say that the file is not there never be (so I have to force the issue and when the application requests a file I have to browse and add files), secondly when I run the program and it reads in the file it does not display the strings or double immediately instead , I must hit the submit button and what they finally, finally arrive when I reset my values in the .txt files and put in my thong and double and press on submit table jumps in one place and starts at index 1 (array [1]) if anyone can help I would appreciate it a lot.

  Here is my code:

  That's what I wanted to say on the structure of the event and it should take your second problem.  I don't see the third one.  I saw no flicker, but I have a slight vision problem which means I do not waver.  So he can sparkle.  Or maybe not.

• Leak memory in real time caused by VISA Read and timed loop of data nodes? Is not supposed.

  In collaboration with LV 8.2.1 in real time to develop applications that monitor or emulate computers on bus RS-422.   The following screenshots have been taken an application that monitors a transmission of 200 Hz.  After a few hours, the PXI station would break a range impressive messages angry... most involving something about memory loss.  After much hair pulling and passing money, my partner has discovered while looking at the available memory on the controller of loss of memory occurred at each loop containing a VISA read and propagation of error using the data nodes (see Leak.jpg of memory).  He concluded that if he went to the propagation of the error to the regular old shift registers, then the available memory was rock-solid.  (has the Leak.jpg of No memory)

  Any ideas of what could be the cause?  Do you see not any problem with the way that we code these kinds of loops?  We always strive to optimize the way in which we use the memory on our urgent requests and VISA readings and DAQmx bed give us the heartache more than ever, we are able to allocate memory for these screws some tips?

  Dan Marlow

  GDLS

  Hi thisisnotadream,

  This problem has been reported, and you seem to be exactly reproduce the conditions required to see this problem. This was reported to R & D (# 134314) for further investigations. There are several possible solutions, of which one is the one you have already found the wiring error directly in the loop. Other situations which give rise to no memory leak are:

  1 if the bytes of the property node port is not there and has read lies in each iteration and time-outs resulting are ignored.

  2. If the structure of the deal is gone and just blindly check the bytes to the port and read each iteration.

  3. If the timed loop is transformed into a while loop.

  Thanks for the comments!

  Kind regards

  Stephen S.

• Lsass.exe on Vista constantly reads and writes three times. How can I stop this please?

  After starting calm down.  Task Manager indicates that LASS. EXE continuously reads and writes.  It shows three readings and three written a couple of times per second.  The readings are still 204 bytes and the writing are always 132 bytes.  This action stops.

  I searched the web for answers and tried all the suggestions and nothing worked.

  Any ideas please?

  Hello

  I suggest you go through the link that talks about a similar problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/03638144-f4da-4349-B246-a27ec3727e70

  You can also post your question to:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity

• type too small to read and ventilated on charges?

  When I down load a program such as turbo tax for companies... the type is too small to read and broken... However, when I install turbo tax personal cd it's ok... Help? This happens when downloading other programs as well... I'm under vista64... it lasts for quite awhile. I tried the s encoding and sometimes it works...

  Richard

  Try the link below and the troubleshooting steps provided

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/font-too-small-in-text-box-and-some-program-in/1c7188df-1080-42ef-9567-b6d96c47cc60

• How can I configure Messenger to record my conversations, record them and send them to a location I can read and save when you use Messenger on other computers than mine?

  How can I configure Messenger to record my conversations, record them and send them to a location I can read and save when you use Messenger on other computers than mine?

  original title: Live Messenger

  Hi Nicoliani,

  To start saving your Conversations in Windows Live Messenger

  1. connect to your window Live Messenger and click on 'Tools' or click on your display name.

  2. scroll down to "Options", a window should appear. When he does very well and click on "Messages".

  3. locate "historical Message". After that, check the box that says, "automatically keep a history of my conversations.

  4. below that you will see "save my conversations in this folder."

  5. to side of her you will see change, make sure that it is a file that you can access and watch later.

  6. If you are on a network, you can save it in a directory which you have access, or you can save it to a location and later mailed to yourself and access it later.

  Where chats are saved is given below.

  1. to access the Conversations go to the start bar and click My Documents. Then click on "my received files."

  2. There should be a folder with your name on it. Click the folder, then you will be in another folder called history. Continue

  3. by clicking on the folder, now you should see all your saved conversations.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.