Reading in the timeline shows vision as post jerky of rendering

Similar Questions

• The video occasionally tear when read in the timeline

  ... and when you export.  It is not damaged because it plays well in the camera etc.  What are the causes for this?

  When I play the clip in the timeline of the clips (not all) tear sometimes for a short time.  The next clip plays very well, then the next clip will be a short tear.  I played the clips in the camera and they seem to be registered correctly and do not show any defects or problems.  This may be the cause?  Any help suggestions would be appreciated.

  Kevin,

  I've confirmed that it's my card reader see  Tried a different drive

  and it worked fine.

  Thank you

  On Wednesday, October 14, 2015, at 17:42 Richard Quirino [email protected]>

• My reading on the timeline has an additional section that I can't remove.  Any idea?

  I have a symbol that loop and I want him to play at a specific point.  I chose the game from and then I changed my mind just play.  He has created 2 styles of arrow in the timeline panel.  One of them has the ability to slide - move where I want to play.  It is not able to be selected, delete, etc.  This means that my symbol will always play from the beginning.

  I tried to remove the symbol from the stage and then drag it back once again, but he remembered reading layout and back on there.

  Any ideas?

  

  The model you see (shows the actual duration of this chronology of symbols) and the fact its still visible and plays is because you have 'Auto-Play' active symbols.

  Go to the components Panel, double click on the symbol in question and will need you a way of 'change in symbol '. Once in this, go to the properties panel and uncheck, Auto-Play.

  HTH

  Darrell

• Poor quality of the sound in the timeline and export; very well in the Source?

  Hi all.

  Newbie-Pr but experienced pro audio digital. I am confused and I know I am missing just something somewhere.

  I made a video for one of my songs. The graphics are quite (in AE), imported Pr and everything what is superb. I import the final audio mix and it sounds very poor quality when played the chronology and the final output, regardless of the format (I tried several presets and custom as well settings). I played a bit and noticed that the audio sounds fine when played in the Source window inside the Prime Minister.

  The session of Pr is comrised of 18 video tracks (not all playing at the same time, of course) and a stereo audio track.

  I tried to re - export audio from logic to depths of different bits, sampling frequencies and formats of file (mp3, wav, AAC, etc.) but the results are the same each time: Source (Pr) sounds very good, logic output sounds very well made / reading of the timeline looks very bad quality mp3 and produces final sounds just as bad.

  I tried everything I can think of. I hope one of you can show me what I'm missing.

  TIA!

  Mark

  First Pro CC

  Processor 2 x 2.8 GHz Quad-Core Intel Xeon

  Memory 8 GB 800 MHz DDR2 FB-DIMM

  Graphics  ATI Radeon HD 2600 XT 256 MB

  Software  OS X 10.9.1 (B 13, 42)

  Thanks for the reply!

  I lived the same results, no matter what I used the export settings. In addition, the poor quality of the sound was present in the timeline itself, without even exporting the project.

  Finally, I lifted my hands, has launched a completely new project, the same audio file in drugs... sounded good. Copied / pasted the video clips in the project original, broken and boom, everything is fixed. Yes, corrupted file Pr, it turns out. All I had to do was start a new project and import all the old components.

  I had to do that in logic a lot (more and more these days). I wish just that I had tried 10 hours earlier! HA.

  Anyway, problem solved and many thanks!

• HD video has playback jerky on the timeline

  Equipment:

  New MacPro 2 X 2.93 GHz 6-Core intel Xeon

  12GBs Ram

  NVIDIA Quadro 4000 2048 MB video card

  10.7.2 software

  Video card: Kona 3 with 9.0.3 9.01 & driver first plugin

  VideoDrive: 7200 RPM 2 TB internal (not the system drive) remaining approximately 750 GB of space

  Adobe CS 5.5 software

  I just changed from FCP 7 to CS5.5 including a new computer that I perceive is optimized for CS 5.5.  During playback, my audio is choppy and pick up from time to time, so if I stop and start the recovery period, it will be fine, or sometimes there is no audio data.  doesn't seem to be a consistency in what will happen the next time that I start reading.  The timeline is a 1080i ProRes file ended up in FCP 7 and then import the video and audio to the Prime Minister to do some last minute changes.  Program lasts 50 minutes.  I have the setup of the compressed sequence as Kona 1080i.  I guess I missed something very basic here, but don't have a clue what it could be.  Can someone point me in the right direction?

  THX... Jim Watt

  Where you do not see this, Walter also has a post on his blog that mentions the latest drivers of AJA (9.1, I think), which contains some performance modifications, including a cardan "aggressive cache", you might want to experiment.

  http://www.biscardicreative.com/blog/2011/11/fix-to-DNxHD-QuickTime-stuttering-in-premiere - pro-cs-5-5-2.

• Overview of the timeline in first Pro CC issues

  Hello

  I'm working on my feature film and the last 2-3 days, I notice that my PREFIGURERA RETURNED the timeline shift. When I give for rendering, making it just continues to increase, the number of images increases... kind of like a variable image made... and just past!

  I uninstalled first CC and installed, changed hard disks. The problem still persists!

  Please suggest what to do!

  Thank you

  2014 Macbook Pro 15 inch Retina 2.3 Ghz Intel Core i7 Mac OSX 10.9.5

  To obtain the fix for this bug, you need to update. But I suspect you are absolutely the fix for the bug as there are solutions. There are probably only a small number of problem tasks in the sequence that are at the origin of the problem. Maybe only one. So to make the sequence into segments defined by points In/Out until you find a problem spot. Then simply ignore this point.

  Which begs the question as to whether you really need restore at all. In case you are not aware, this is entirely optional for smoother playback purposes. If your computer is powerful enough, it may not be necessary.

• Stop in the timeline - do not show all layers. How?

  I am an experienced AfterEffects, FCP and user of Camtasia, but new to Captivate. Currently using Captivate CS5.5 and cannot understand why Captivate shows ALL layers of content when the PlayBar stops rather than only the active layers at this point in time. Is there a way to defeat this behavior? It makes me absolutely CRAZY! Cannot find the answer on other resources. -Thx!

  Hello

  When you edit the slide, you'll see all the objects that are on this slide. When you drag the playhead, you will see only the objects that are active at this time, but when you let the head of reading all the objects will be there once again. Sorry, it's as well as CP is designed. This move does not create real insight, who needs a temporary creation a SWF file. This is only possible with methods of real preview (F4, F8, F12). Captivate isn't a video application, such as Camtasia or AfterEffects. It has the benefits of having all the visible objects like to align the purposes; forget the pure video where the handling of different objects is not at all easy. If you want to align the beginning of a timeline object with playhead, use CTRL-L. Perhaps you will help my blog post on the timeline, it is for the starters in Captivate:

  TinyTimelineTidbits

  Lilybiri

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• MY DVD RW OPTIARC AD - 7710H IS NOT READ ANY DISC, IT SHOWS THAT THE DISC IS BLANK, PLS HELP ME?

  MY DVD RW OPTIARC AD - 7710H IS NOT READ ANY DISC, IT SHOWS THAT THE DISC IS EMPTY

  ago nero essential is installed in my laptop, I sort my problem that I did not use my dvd rw for many months, because of which some dust particles accumulated on the lens, and when I cleaned it with clean cloth, it worked, and now my dvd rw works properly, anyway thanks for your help @vijin v...

• How reading or loop as a part of the timeline?

  Hi all... I'm very new to AE after deciding to give up Vegas Pro and go with something more 'pro', so I'm still trying to grasp the basics. One thing that I have not been able to understand is how to define the play range so he plays or only a selected portion of the chronology of the loops.

  Basically, in Vegas Pro you do drag the start and end ticks above your timeline in the case where you want to begin reading and at the end, allowing you to focus on only that section until you recover the beach... and it would loop for always this little section so could focus on him without constantly stop manually click in the timeline panel. I read the AE docs on reading with SPACEBAR vs numlock-0, etc., and I'm slowly catching on (I think) like Adobe to do things, but I can't find how to set an end point so that playback stop there or buckles when it gets there. Sorry if I missed something so obvious... but I'd like guidance.

  Thank you...

  but I can't find how to set an end point so that playback stop there or buckles when it gets there.

  you mean the activities:

  

  You can manually drag or use shortcuts B and N for the beginning and the end

  Welcome to Ae I suggest that learn you it from the Earth upwards and not by intuition. This will ensure that you have a good knowledge base. many users rushed for fun things and who is heard, but you can go only so far before you get stuck. If you really want to know Ae and enjoy it, you must know the basics first. There are several good ways to start: after effects CC tutorials | Learn how to use after effects CC and I would recommend also draw a well built essnetial built underway at Ae. Lynda has some great ones.

• Titles appear on the timeline, not in reading

  I use first elements 13 on a machine Windows 10 running a 4.00 GHz with 16 GB of RAM.

  I'm trying to add titles superimposed on a clip. Title of the video track 2 is supposed to remain on the screen the video title Track 3 appears, and the two remain until the end of the clip. There is also a title of intro at the beginning of the video clip 1 way that fades when the clip starts.

  The titles on video tracks 2 and 3 do not appear in the reading, before and after rendering. When I try to modify them to make them work, I have sizeable windows on the playback screen who target a cross in the middle of them. I guess I'm supposed to use it to move the frames autour, but what I really want, is to get rid of these and get back to the main display. By clicking on them and pressing on 'Delete' deletes the clip or title associated with them.

  The manual says that the titles placed on upper video tracks are supposed to be superimposed on the video clip. This is not the case.

  Here is a screenshot that displays the screen with the resizable image / crosshair and the timeline with the video clips and the title.

  I feel that the solution to this problem is something simple, but in this case, RTFM has been less successful.

  

  You see the horizontal yellow line which crosses the title element? This line represents opacity. Okay now that the line is pulled all the way down to zero, which makes the clip transparent. Drop it to the top of the item, as it appears on the other elements on your timeline.

• You can select a group of clips on the timeline to loop through reading?

  In order to help me learn reading and lessons complex clip I use Premiere Pro to isolate sections of the difficulty of the study. I have independent clips on the timeline laid out in groups, each group marked with color labels so I can review and play only the groups of clips, or "parties", overall, but I would like to isolate each of these groups a little more if I could play each independently "in the loop" so I can still study them independently and isolated from others. Is it possible to do it on the timeline? I know I can score points on the clips themselves in the preview and output screens and loop, but now I would do each set of clips on the timeline in loop in the sections of clips. I hope that I wrote this clearly.

  Put them on a different schedule and those in the playback loop.

• Nikon D7100, I can't download my RAW to Lightroom files. I have read all the post, update of 3.6 to 4.4 and 5.7 with Lightroom 2015; Nothing helps!

  Nikon D7100, I cannot download my RAW to Lightroom files! I have read all the post and started with Lightroom 3.6 4.4, Lightroom 2015 then Lightroom 5.7 update. Nothing helps!

  The Nikon D7100 is supported from 4.4 LR on-site. So I have no idea why you have problems to import files NAVE of this camera or the card memory used in this device.

  You use the Nikon software first to get images of camera or card to your hard drive? I read somewhere that the Nikon software does something for the NAVE of the files making them unreadable by LR.

• A videoagrapher sent me to edit MOV files. When I try to read up on the timeline just stuck... can not play at all. any idea?...

  A videoagrapher sent me to edit MOV files. When I try to read up on the timeline just stuck... can not play at all. any idea?...

  Hi Gilad,

  It seems more an audio problem for me.

  Please select all the clips on the timeline, right-click and select 'Remove' to separate the audio from the videos.

  Once done select Audio only in the timeline and right click to select "Render and replace. Once done, save and close the project.

  Try reading to check if it works.

  You can also try to export an XML file i.e tab of project selection.

  Go to file > export > Final Cut Pro XML

  After creating a new project > import the XML file, and then open the sequence to check.

  Vinay

• PDF shows PNG files in the reader in the form of grey areas.

  PDF shows PNG files in the reader in the form of grey areas.  Maybe I changed a setting when I was stuffing autour and I don't know what ive done

  Thanks in advance

  Go to edit - preferences - Page display and check 'display big images '.