ReadyNAS Duo will not do the factory reset

Similar Questions

• Cisco 7931 G do not start after factory reset

  Hello world

  So, I came across a problem that I hit an absolute impasse. I will list it first, then I will follow it with various methods, I tried to solve it.

  The phone in question is a 7931G, I can't tell you what software to boot, he's trying to boot from because it does not go far enough in the boot, treat for me to say. I did the factory reset as recommended by the documentation: give power to the phone (in my case through PoE on a UC540), press and hold the ' # ' until the side buttons are flashing turn upward. At this point, press the 1-2-3-4-5-6-7-8-9-*-0-# keys and wait until the course ends. The UC540 was active DHCP, all of the latest software on it (Sogiciel 8.6) and tftp-server was operational as well.

  What's happening: the phone starts the boot process and go to the screen that says "Update"... "and then, quickly, it flashes on the screen that she asked ' term31.default.loads... 0% "and then it starts to boot (Cisco logo appears)." On the bottom left where it usually shows a box with a check mark, it now shows a full circle in a slightly larger circle. He sat at the splash screen for about 2 minutes, stop and try to move on once more.

  I do not know what boot image he used before the factory reset, but this time around his supposed to pull the image of "SCCP31.9 - 1 - 1SR1S.loads. I read in a separate thread support the first 7931 must be upgraded to "SCCP31.8 - 5-4 S .loads" before he can start from 9.x software. So I tftp had the entire folder 7931 Sogiciel 8.2 UC540 to the UC540. I created the entries of the tftp server and alias and set the 7931 load newly downloaded software. Nothing. (The newly downloaded had the corresponding term31.default.loads of the file that was pointed toward the 8.5.4 files).

  I rolled back the UC540 everything back to 8.2 Sogiciel, with all the default configurations. Connected to an another phone 7931 (currently logged in as my personal and registered phone CUCM), than the phone registered car very well. I assigned it lines, performed test calls and all of the features worked as expected. 7931 issues, however, remained with the same problems.

  I tried to connect the problematic 7931 to CUCM of office, but the problem has prevailed without worrying what port I used.

  Any ideas or suggestions would be greatly appreciated. My goal here is to get the phone to properly initialize and eventually to register with the UC540.

  Thank you

  Andrei.

  EDIT: addition of debugs for tftp

  001095: 2 August 22:19:45.928: % LINK-3-UPDOWN: Interface FastEthernet0/1/1, changed State to

  001096: 2 August 22:19:46.928: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1/1, changed State to

  001097: 2 August 22:19:52.400: TFTP: application server port 49152, socket_id 0 87903524 process 160 x

  001098: 2 August 22:19:52.400: TFTP: read the 10.1.1.11 host demand (49152) via BVI100

  001099: 2 August 22:19:52.400: TFTP: looking for term31.default.loads

  001100: 2 August 22:19:52.400: TFTP: open flash:/phones/7931/term31.default.loads, fd 3, size 655 to process 160

  001101: 2 August 22:19:52.404: TFTP: sending of block 1 (retry 0), socket_id 0 x 87903524

  001102: 2 August 22:19:52.404: TFTP: ACK received for block 1, socket_id 0 x 87903524

  001103: 2 August 22:19:52.408: TFTP: sending of block 2 (retry 0), socket_id 0 x 87903524

  001104: 2 August 22:19:52.408: TFTP: ACK received for block 2, socket_id 0 x 87903524

  001105: 2 August 22:19:52.408: TFTP: finished flash:/phones/7931/term31.default.loads, 00:00:00 time process 160

  001106: 2 August 22:19:53.040: TFTP: application server port 49153, socket_id 0x86A5CB70 process 160

  001107: 2 August 22:19:53.040: TFTP: read the 10.1.1.11 host demand (49153) via BVI100

  001108: 2 August 22:19:53.040: TFTP: looking for term31.default.loads

  001109: 2 August 22:19:53.040: TFTP: open flash:/phones/7931/term31.default.loads, fd 3, size 655 to process 160

  001110: 2 August 22:19:53.040: TFTP: sending of block 1 (retry 0), socket_id 0x86A5CB70

  001111: 2 August 22:19:53.044: TFTP: ACK received for block 1, socket_id 0x86A5CB70

  001112: 2 August 22:19:53.044: TFTP: sending of block 2 (retry 0), socket_id 0x86A5CB70

  001113: 2 August 22:19:53.044: TFTP: ACK received for block 2, socket_id 0x86A5CB70

  001114: 2 August 22:19:53.048: TFTP: finished flash:/phones/7931/term31.default.loads, 00:00:00 time process 160

  001115: 2 August 22:22:01.788: % LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1/1, changed state down

  Try to restore to 8.5.2 or 8.4.4.

• I have a pavilion p6130fpc and it will not see the drives.

  I have a pavilion p6130fpc that will not see the drives. I tried 3 different hard drives and change the cable and port twice. I have also reset the BIOS and pressed the power button for five seconds after you disconnect without success. Someone at - it any other ideas?

  Willman,

  Unfortunately you are not alone. HP has sold a lot of different models with the M2N78 - motherboard. The problem is that the manufacturer of the Board of Directors (not HP) set up a controller chip NVidia which tended to overheat. Once this chip goes, ur stuck. The SATA ports are controlled by this chip.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

• An MP3 will not play, the reason may be that there is inside the ID3 headers.

  An MP3 will not play, the reason may be that there is inside the ID3 headers.

  I have to remove them, otherwise the WMP cannot play. But how do I do this?

  original title: MP3 will not play

  Hello

  -What operating system is installed on your computer?
  -What version of Windows Media Player do you use?

  The ID3 header is a part of the file that stores the album information of the song (for example, the song name, artist name, album name and kind). This information is sometimes called a label. After you remove the headers ID3, Windows Media Player should be able to play MP3 files.

  Warning

  Try to remove ID3 headers might damage the file and make it unplayable. Therefore, always make a copy of the file before editing.

  If you try to play an MP3 file that contains compressed ID3 headers, make a copy of the file and then use an ID3 tag non - editing program Microsoft to remove or reset the file's ID3 headers.

  If you are referring to edit media information, see the following link:

  Add or edit media information in Windows Media Player

• IE 8 will not save the history in windows xp

  IE 8 will not save the history in windows xp. All good Internet Options boxes checked/unchecked. System Restore has not fixed the issues. Possible registry problem?

  Hello
  I suggest try reseting IE and check.
  How to reset Internet Explorer settings
  http://support.Microsoft.com/kb/923737
  
  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
  

• Aspire M5 - 481 T-6488 - does not recognize that AC is plugged. Will not charge the battery.

  Aspire M5 - 481 T-6488 - does not recognize that AC is plugged. Will not charge the battery.

  Laptop is about 2 years old.  Running on the Windows 8 origninal accompanying.  Had the same problem when it was purchased.  He sent to Acer.  Returned with no report / Details.  Has worked very well. Until recently.

  Noticed that seeing orange lights up when it feels like load and stops at 35% load.  Load is something dark, don't miss especially.

  Tried:

  Stick a PIN in the "battery reset" hole on the back

  Uninstalling the 'API Microsoft' battery

  Remove the battery to see if it'll work without it (it has an internal battery)

  Of course Acer won't help now since the warranty has expired.

  Please notify.  Thank you.

  Power plug has been checked, flinched 19V.

  Laptop briefly, then lost load capacity.  Checked power once again, 0V.

  Power adapter is bad.

• Error code: 80070490, when you try to do the factory reset.

  Hi, my laptop is Dell Inspiron 15R SE and my window always freeze once I started my pc for a few minutes... the Task Manager and the window are freezing and he wouldn't recover more, I have to shut down the pc by now the power button as restart or shut down takes forever to fill.

  I did test of ePSA, and my pc is all green (extended test since)

  I don't know what to do so I decided just to do a factory reset for pc.

  But what happens is the window give me the error code: 80070490. And it does not allow me to do the factory reset.

  Annex: this image is the result of using my Dell system health check.  (Mcafee is always automatically disabled)

  

  And another is BlueScreen Troubleshooter

  

  
  

• Windows will not recognize the password

  I have reset the password using windows live reset option, but now my laptop will not accept the password and I am more able to access the laptop at all. I don't know what else to do. Help, please.

  If you change the Windows through Microsoft Account password online, it will update when you connected to the internet via your computer and when the PC is turned off or disconnected from the internet, you need to use your old password.

• Photoshop will not save the two layers of my doc. Both are visible, cannot merge, cannot flatten, cannot be saved in jpeg or tif

  Photoshop will not save the two layers of my doc. Both are visible, cannot merge, cannot flatten, cannot be saved in jpeg or tif. What I am doing wrong? How should I do? How to save my document?

  Hi micheleh,

  Try resetting the PS preferences

  • To restore preferences quickly by using a keyboard shortcut: press and hold Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) when you start Photoshop. You are prompted to delete the current settings. New preferences files are created the next time you start Photoshop.
  • What happens if you do not use the signature
  • Do you use third-party plug-ins in Psalm

  Concerning

  Rohit

• 55XD8505 it recharges continuously--cannot reach the factory reset

  Hello

  My 55XD8505 2016 is having issues. When you enter the home menu is extremely slow and leave then it is only a matter of minutes before the device reboots. If I just start the TV and stay away from the home menu, I can watch TV.

  Now, my intention is to restore the factory settings to try to get the system going again. Normally a reset of the Android system can be done either

  (1) via the settings menu

  or

  (2) by switch on the unit with the volume on/off button + start button / stop key and use recovery menu.

  I can't do 1) since any speed, I navigate the menu of settings, the TV restarts before I can fill a selection of factory settings.

  I can't do 2) either - at least all the possible combinations of Sony, I found does not apply for my TV

  I'm all of ideas - is it possible to factory reset via the USB port (perhaps using ADB)?

  A nailed!

  I discovered that you can use 'top' under adb shell. I did the following:

  (1) connect adb

  (2) adb shell

  (3) top m 5 (this lists the first 5 cpu by using the applications)

  After running high and enter the main menu, I saw the CPU use climbing, and the app in the foreground was always/system/bin/mtkbt, which I figured well be related to Bluetooth. So, after a few attempts of menu navigation speed, I managed to enter the bluetooth menu and disable bluetooth before it restarts.

  Success! Now I can navigate the menu of home once again, I have the tried clear the data cache / anything related to bluetooth from the menu applications and then reactivate bluetooth, but alas the problem returns. So now I'm running the TV without bluetooth. I could try to factory reset the TV tomorrow to see if it helps - at least now I can actually reach the factory reset menu.

  UPDATE:

  Now after you turn off the bluetooth, I could navigate the menu to factory reset. After doing a reset complete, it seems that everything is back to normal - even with bluetooth enabled. Problem solved... Thanks adb.

• On my old e-mail account I could insert a list of addresses by putting the list name in the to: my new email account will not accept the list names. How can I fix th

  My old Thunderbird e-mail account has been with Time Warner,
  SC. RR.com. my new second account) is with AT & T, ATT.net.

  In my old account I could give a name to a list of multiple e-mail accounts, put the name of lists at the BBC: and send email to everyone on the list.
  My new account will not accept the name of a list. He insists on the format of a single e-mail account. I tried to create a new list after closing the old account and open the new one, but the results were the same.

  How to make 'list' to work on my new ATT account?

  I'm glad to hear that your problem has been resolved, please select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

  Please contact the Mozilla Support!

• Thunderbird 31 will not download the messages from the pop server (to 24 worked) CAUSED by Avast

  TBird updated to version 31, it will not download the messages of my pop server. I can send, but not download messages. I restored Win (7) at an earlier date to return to the version 24 of Tbird, and everything worked OK.

  TBird later Auto-setting to update itself (ugh!) back to 31, and we don't go again, no E-mail download. I changed the settings to Win firewall, even tried that turned off completely for testing, without any difference. Retarted Tbird and win several times, no go. It's extremely frustrating. Does anyone actually * test * software updates before releasing these days here?

  TBird works very well for me in Linux Mint 16, but this glitch under Win 7 just jumped to the top with the upgrade to 31.

  Thanks for your suggestions, you can offer!

  the typical suspects are AV and firewall software.

  Start * Windows * safe mode with active network
  -win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?

• Preview will not open the hyperlink to the specific DOI PDF format

  Hi all

  I generated a PDF of markdown by Pandoc (with xelatex as the tex engine); the PDF document contains hyperlinks URLS. One of hyperlinks is a specific address of DOI: doi:10.2307 / 488160. In Adobe Acrobat Reader, this link accurately opens in Firefox (my default browser) and is then solved using a DOI Manager that I have in firefox. Overview, however, will not open the link. When you click, you get just that boing sound error.

  I believe this may have to do with the security aspects of preview that are cooked in the program - what kind of overview is able to open external files. There was a discussion on this here, but it is not exactly answered my question: https://apple.stackexchange.com/questions/119299/why-preview-app-refuse-to-open-local-lien-dans-un PDF file.

  If this isn't a connected safety side overview, is it possible to adjust preferences overview way treats the links that start by "doi:"? Other ideas.

  Note: I know there is a better way to include the Doi in Tex docs (with the DOI package) as the starting URL by "doi:" but I like to keep my Markdown as clearly readable as possible and does not markup inside latex. I might add a Pandoc filter for this - but I would rather understand the problem of this end if possible.

  Thank you!

  ... One of hyperlinks is a specific address of DOI: doi:10.2307 / 488160.

  This address SHOULD you present is only the persistent identifier. To make a connection, precede the string with the http://dx.doi.org/ url so that your example is http://dx.doi.org/10.2307/488160

  Basically, the url is a program of resolution. By including a DOI link, there is no need for the Manager/addon Firefox DOI. You can have the text that is displayed differs from the URL. In other words, the manuscript shows doi:10.2307/488160 but the underlying url link is http://dx.doi.org/10.2307/488160

  You can see the particular style guide that you must follow to display format specifications. For example, see details for APA style.

• Fire fox is slow and on a single website, it goes on the site but will not load the page

  Fire fox is slow. Also on a single Fire fox web site goes on the website but will not load the page
  Questions began Tuesday, June 16, 14. Website can be opened with other browsers.
  I am running windows XP sp2

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart

• My IPAD 4 takes great pictures but will not save the photo

  MY IPAD 4 takes great pictures but will not save the photo

  Don't know what your question, but the changes are saved to a file with the extension. AAE. If you are importing photos to a Mac changes will come with photos.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support