Real-time display and receive data from txt files

Similar Questions

• Import data from txt file and name the channels

  Hello

  I want to import data from a file txt (see attachment). Well well, no proplem, but I want to also read the information on the channel names and units and rename the imported channels. Is it possible to do? It is also important that the number of channels may vary.

  Can someone give me some examples of code?

  Thank you very much

  Gabriel

  Hello Andreas,

  Thanks for your work. I'll adjust the code.

  Gabriel

• Reading data from txt file and move the engine for the data

  At this point, I had the table and I already read txt file and I want to read the data in table and separate the corresponding element in 3 parts (3 axes: X, Y, Z) and I was able to make the transmission of data to move the motor in this position. and the treatment will be repeated after completing the first point

  Hey, the Index Array function may be what you are looking for. Here is the link to the documentation for this function.

  Function table index

  https://zone.NI.com/reference/en-XX/help/371361L-01/Glang/index_array/

• How to transform the received data from the file adapter

  Hi '.
  
  I read the data in the XML file using the file adapter, now I want to write the same content I read from this file to a different/new XML file, the problem is that I'm unable to perform a transformation here, when I use a transformation with source element as the output of the reading of file and the target as input in the new file it writes an empty file ,
  I checked the audit trail that showsme that the transformation is empty.
  Please tell me how I transform the item I received a file to make them as input to the next file
  
  Thank you
  Yatan

  You can post your Transformation_3.xsl, I would also like to see the result of the receipt of the readfile.

  I'm not convinced that this XML is correct. I don't expect to see the element xsd: Schema.

  see you soon
  James

• Import data from txt file with the reading of the names of columns

  Hello

  After changing the export of my simulation program, I can't use the postet heresolution, that works well. (I mark the message as hailed this is why I run a post only)

  Can anybode if you please tell me how to fan the code to import the new txt file type. The names of the columns here are FOA online first columns, like this (with ignoring the first lines).

  Hello Gabriel

  You can use the use wizard (Navigator > file > use wizard) to define a new filter to import file for your data. It will take only a minute.

  Please find the uri of the file that I create for you. Copy the attached file in your disk, unzip it and double-click the file uri.

  Then you can open your file by using 'open with '.

  Hope this helps

• read and receive data from the server

  Hi all

  I want to develop an application that extract data related to the content of the server, how to do? I read somewhere stating this task requires sdk server push? is it possible do not use push sdk server and the server reading so that I don't have install anyting from the server.

  Your Web service code decides how much data you send or receive from the customer.

  For example, you can have a Web service method, which returns records to a particular date, then you must create a web service method that accepts a date to a string as a parameter and a request for service records of server request, write resultset in encoding (like xml, json, etc) and return this string as a response to the client client will read the data as a byte array, then converts the byte array to the string and according to the encoding defined by service will analyze data of interest.

• Prob w/Importing Favorites and other data from Internet Explorer

  Everything by following the steps described in the forum article titled "Importing Favorites and other data from Internet Explorer" after completing step 3, select which points to import, if I select all the option or just the Favorites, I get the same error "Firefox has stopped working... close the program."

  I am importing of IE 8 on laptop Win7 OS. I tried importing every time and cannot get past this error. I made an export of IE8 that takes the form of a html file that there is apparently no option in Firefox to use.

  in Firefox:
  Bookmarks > organize bookmarks-> import and backup - import HTML... = HTML file

• HP photosmart prem 310 cannot receive data from the pc

  Ive installed the new printer hp photosmart prem 310 series. I get a message saying that the printer can receive data from the pc. I have went to hp site and ran updates of drivers and software

  Have you tried that?
  HP Print doctor for help with many printing problems

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c02073861&JumpID=ex_r4155/HHO/IPG/ccdoc/trailhead_doc&lang=en

  I hope this helps.

• I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  I am new to the ethernet communication using labview. I don't have any material. I have two laptop, I need to send and receive data through these 2 portable by using labview. Kindly help me on this.

  Dennis has already said: for a direct PC - PC connection, you need a cross over cable. If you connect through a router or a switch, you use a standard cable.

• Can I send and receive faxes from my hotmail account?

  I would like to send and receive faxes from my hotmail account.  Is this possible?

  Thank you for visiting the Microsoft answers community site!

  The question you have posted is related to Windows Live Hotmail and would be better suited in the Windows Live Solution Center.

  Please visit the link below to find a community that will support what ask you

  http://windowslivehelp.com/forums.aspx?ProductID=1

• I open a .bat file in wordpad by mistake and saved as a .txt file and on all bat files the icon became a txt icon

  I opened a .bat file in wordpad by mistake and saved as a txt file and icon on all files bat transformed into an icon of txt. So I can't run bat files either. Simply open wordpad all the time. How can I activate this return?

  I also received a reply from a friend before subsequently I tried method 2. He found this site: http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html

  Its almost the same thing but U don't need to go into the many catalogs.

  Just download the Default_BAT.reg and run it. And restart the computer, and it works again. http://www.SevenForums.com/attachments/tutorials/168956d1312706042-default-file-type-associations-restore-default_bat.reg

  Thanks to everyone who answered my question.

  Concerning the SwedenDanny Pentecost

  I also received a reply from a friend before subsequently I tried method 2. He found this site: http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html

  Its almost the same thing but U don't need to go into the many catalogs.

  Just download the Default_BAT.reg and run it. And restart the computer, and it works again. http://www.SevenForums.com/attachments/tutorials/168956d1312706042-default-file-type-associations-restore-default_bat.reg

  Thanks to everyone who answered my question.

  Concerning the SwedenDanny Pentecost

• 5 Lightroom sometimes fails to load EXIF GPS data from .jpg files

  Until I Lightroom, I used geoSetter to add GPS data to my .jpg files. Most of them have loaded up in LR without problem, but for some of them, Lightroom could not import the GPS data. I used to compare GPS data in the loaded files OK and those who have not noticed that some of the problem files do not have exiftool: GPS, GPS Time Stamp, dater GPS map data. I used exiftool to change these in the file, Lightroom still not managed to load GPS data.  Anyone has an idea why Lightroom 5 sometimes fails to load EXIF GPS data from .jpg file

  = P3207532.jpg - data from GPS not imported into Lightroom

  ID of the GPS Version 2.2.0.0

  GPS Latitude Ref North

  GPS Longitude Ref is

  REF Altitude GPS altitude

  Time GPS 2015:03:20 02:18:36Z

  GPS Latitude 20 deg 54' 41.68 '' N

  GPS Longitude 107 deg 0' 5.47 "E

  GPS Position 20 deg 54' 41.68 '' N, 107 deg 0' 5.47 "E

  = P3207533. JPG - Imported data GPS OK in Lightroom

  ID of the GPS Version 2.2.0.0

  GPS timestamp 02:22:26

  GPS map Datum WGS-84

  GPS Date Stamp 2015:03:20

  Time GPS 2015:03:20 02:22:26Z

  GPS Latitude 20 deg 54' 43,41 "N

  GPS Latitude Ref North

  GPS Longitude 107 deg 1 9.10 ' E

  GPS Longitude Ref is

  GPS Position 20 deg 54' 43,41 "N, 107 deg 1 9.10 ' E

  = P3207532.edited.jpg - data from GPS not imported into Lightroom

  ID of the GPS Version 2.2.0.0

  GPS Latitude Ref North

  GPS Longitude Ref is

  REF Altitude GPS altitude

  GPS timestamp 02:22:26

  GPS map Datum WGS-84

  GPS Date Stamp 2015:03:20

  Time GPS 2015:03:20 02:22:26Z

  GPS Latitude 20 deg 54' 41.68 '' N

  GPS Longitude 107 deg 0' 5.47 "E

  GPS Position 20 deg 54' 41.68 '' N, 107 deg 0' 5.47 "E

  The problem with P3207532.jpg is that it contains two sets of GPS, a values in the section of EXIF metadata in the XMP metadata section:

  $ exiftool -a -G P3207532.jpg | grep -i gps
  [EXIF]          GPS Version ID                  : 2.2.0.0
  [EXIF]          GPS Latitude Ref                : North
  [EXIF]          GPS Latitude                    : 20 deg 54' 41.68"
  [EXIF]          GPS Longitude Ref              : East
  [EXIF]          GPS Longitude                  : 107 deg 0' 5.47"
  [EXIF]          GPS Altitude Ref                : Above Sea Level
  [EXIF]          GPS Time Stamp                  : 02:22:26
  [EXIF]          GPS Map Datum                  : WGS-84
  [EXIF]          GPS Date Stamp                  : 2015:03:20
  [XMP]          GPS Date/Time                  : 2015:03:20 02:18:36Z
  [XMP]          GPS Version ID                  : 2.2.0.0
  

  But the XMP section contains an incomplete set GPS fields. Note that XMP:GPSDateTime specifies a time other than EXIF:GPSTimeStamp.

  I don't know which of your programs may have created these XMP values false, incomplete, but they confused LR.  According to the specifications of the Working Group of the metadata, which accepted LR, LR, choose the EXIF GPS values and false XMP values should not confuse it. But LR is preferring the XMP values and then conclude it is not all the GPS coordinates.

  You can work around this bug in LR by doing:

  ExifTool - xmp: gpsdatetime = - xmp: gpsversionid = file

• Import data from CSV file

  Dear friends,
  
  I have already created the directory DIR1.
  
  I get the following warning message
  
  1 CREATE OR REPLACE PROCEDURE P2
  2 is
  3 BEGIN
  4. create table (ext_table_csv1)
  5 I have the number,
  Varchar2 (20) n 6,.
  7 m Varchar2 (20)
  4%
  9 organization external)
  type oracle_loader 10
  By default 11 Dir1 directory
  (settings) 12 access
  13 records delimited by newline
  14 fields completed by «,»
  15 field missing values are null
  16)
  17 location ("file.csv")
  18)
  19 reject limit unlimited;
  20 * END P2;
  QL > /.
  
  CAUTION: Procedure created with compilation errors.
  
  QL > show err
  rreurs for PROCEDURE P2:
  
  ERROR OF INE / COL
  ------- -----------------------------------------------------------------
  / 1 PLS-00103: encountered the symbol "CREATE" when expecting one of
  What follows:
  begin case declare exit for goto if loop mod null pragma
  raise return select update while < ID >
  < between double quote delimited identifiers of > < a variable binding > < <
  Close current delete fetch locking insert open rollback
  SAVEPOINT SQLExecute set pipe fusion commit forall
  
  Please help me.

  NGK246 wrote:
  If at all, I want to recover data from another file CSV (say 'test20101214.txt') to the external table defined so I just need to
  change the location of the CSV pointing to the table, as shown below...
  run immediately "change the location of the table ext_test (" test ' |) " to_char(sysdate-1,'YYYYMMDD') |'. txt ")';
  And then use INSERT... SELECT to inject data into my actual table residing on my database.

  Please correct me if I'm wrong.

  Yes, that's about all.

• Acquire data from a file using a dialog popup on a stamp object tabs-delimited

  I'm trying to import data from a file delimited by tabs using a dialog popup on a stamp object.  I bought the book by Thom Parker -all on the stamps of the PDF in Acrobat and paperless workflow and have worked through the examples in the Appendix.

  My problem is to understand how to integrate the data in the object of the file dialog box.

  I'm not plagiarizing his book - so am elect at this time is not to justify my code.  The script reads the file, by simply providing only not in the accounts rendered file so that I can choose which line to import into the stamp.

  I typed in the code exactly how the book described, but when the popup dialog object is selected, there is nothing in the menu dropdown.  When I click OK, the first record is placed on the stamp - except for the fields that I am eager to appear in the popup box object dialog box.

  I searched the forums, as well as the JavaScript reference.  There are examples of popup dialog object, but none of them show how to import data from a file - just for the items to be of type in the list.

  Any help would be greatly appreciated!  I tried to work on this for several months now.

  I got the files directly from tdjohnson7700. Here are my findings:

  There are two problems with your files:

  You reference an object of 'Dialogue', even if you declared as 'dialogue' - JavaScript is case-sensitive, so you must use the lowercase version.

  And then you have an additional column of data in your text file, Acrobat doesn't like it and reports an error. You can see when you use the tools > forms > Forms Options more > function to import data to import data from your text file. You must either add a form field named "last" to your stamp, or you need to remove this column from the text file. After these two changes, the stamp works.

• United Nations-editing data from a file, without eval

  I play with the writing of data in a file so that it can persist between sessions. I use

  f.Write (Data.toSource ());

  to save my data, where f is the subject of my file, and

  data var = eval (f.read ());

  to retrieve the data from the file. But that seems to be a way very unsafe to do things. Of course, it is unlikely that someone will use, preference files AEscript as a door furtively, but it's always just security by obscurity.

  Is there a way to read data serialized into a file without using eval()? Or I have to roll-my-own parser / serialize to do safely?

  It turns out that this question has an answer here:

  Read in JSON · EVAL file and to not NOT fabiantheblind/extendscript Wiki · GitHub