Realtek HD and XP SP3
Since the upgrade to SP3 on my HP a1150y (it's old but it works) I get the following when connecting error message:
"Realtek HD Audio Control Panel has encountered a problem and needs to close."
The following technical details are provided:
"AppName: AppVer rthdcpl.exe: 1.1.1.9 ModName: ModVer rthdcpl.exe: 1.1.1.9 Offset: 00188d2c.
I usually just close the window, but what a pain. My sound seems to work very well. I don't use a lot of noise. The problem disappears if I assign account administrative rights. I want to keep all accounts except 'administrator' with limited rights. Microsoft wants $59 to solve this problem because the OEM software and, therefore, the responsibility of the seller (HP). HP wants $$ because my computer is no longer under warranty. Any ideas?
Thank you Paul. The upgrade of the driver worked. In fact, I created a first restore point and downloaded the driver from Realtek AND that of HP. Driver HP says it improves compatibility with the Adobe video editing software. The description didn't fix my problem, but given that Realtek was a kind of warning recommending using a driver from the MFG system, I thought I'd try the Internet HP site first. I did the installation and there is now no error message in limited accounts. I wish that all the world problems have been easier.
Tags: HP HP Desktops
Similar Questions
-
After a 'crash' and reinstall sp3, my computer turns in "safe" mode Help, please!
After a reinstall full of Windows and reinstall sp3, I can only raise the computer in "safe" mode I had sp3 before and was ok? Installation online would not then end I used my original sp3 disc.
Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows. Please note that another repair facility (upgrade AKA on-site) will NOT fix it!
CF. http://michaelstevenstech.com/cleanxpinstall.html#steps
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:
5 steps to help protect your new computer before going online
http://www.Microsoft.com/protect/computer/advanced/XPPC.mspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bSee also:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspx~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Hello l have DOWNLOAD and installed sp3 but it is not in Add and remove programs
Hello l have DOWNLOAD and installed sp3, but it is not in Add and remove programs, wrote sp3 system properties is so this work please help me thnx
Original title: need
If your properties system shows SP3 listed, it is installed.
-
I have a Windows XP laptop and it will not download or install the updates that it says I need to download and install sp3 but it won't either. There is an error message error code: 0x8024400a
Can you help me
Older than SP3 Windows XP is not supported, this means that you must have SP3 to get the update.
Try to run the tool:
-
Color Laserjet 2550 L and XP SP3
Hello
I installed XP SP3, last week and since I was not able to print from my color laserjet 2550 L printer. I tried the windows troubleshooting printing suggestions for the use of different drivers, but no luck. Any body out there got any advice, it's a pain not being able to print.
Thank you very much
If there is no Purifier not listed on the Web site nothing listed in your programs menu or add remove software window, then all you have is a base driver installation. Following the steps listed for remove driver and the entrance to the server properties should be sufficient. Manual uninstallation is for printers that have utility programs or use Software Solutions of Support or Director. Even still, following the instructions provided here should at least bring basic functionality.
-
Realtek LAN and synaptics touchpad driver for hp pavilion g6-2237us
Hi guys
I tried to install the apps, but I can't. hp support assistant warned me that significant action was required and the opening to check on the action, I discovered that the synaptics touchpad and the network local realtek failed to install. they were on the sections of the failing elements and I their redownloaded then through even hp support assistant. the process went well and then stopped on the installation section. both applications are now displayed in the actions of conpleted and didn't stock boxes. How can I successfully install these programs? Help, please.
Thank you
have a guy great day.
@BALDAGEI,
Thanks for posting.
It is possible that there is a problem with the wizard for help where, you may not be able to install the drivers using the program. I would like to troubleshoot the software itself by following the ideas of SuperMario1 in this thread: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/HP-Support-Assistant-Window...
Also, you can try to install the touchpad and the Realtek driver yourself:
-To install tuchpad driver, download and run the following: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-118377-1&cc=ca&dlc=en&lc=en&os=4158&product=5318955&sw_lang=
-To install the Realtek LAN driver, download and run the following: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110514-1&cc=ca&dlc=en&lc=en&os=4158&product=5318955&sw_lang=
-
Repeated (X 5 + weeks) failed to download and install SP3 WHP
Download install & Windows Service Pack 3 for laptop Dell Inspiron 1300, running Windows XP Home Edition, Version 5.1.2600 fails because:
1 / "service Pack 3 c:\windows\softwaredistribution\cff8ec753e88561d2ddb53e183dc05c3e\update\update.inf file is not correct.
2 / the 0x8007F00C error codePlease notify.
John
Lancaster0X8007F00C: STATUS_INVALID_INF_FILE
This [file] is for a different hardware platform.Start | Run: (type) WINVER. [OK]
After the second line of text in the window that appears.
=============================
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bHow to troubleshoot a failed installation of WinXP SP3
http://support.Microsoft.com/kb/950718WinXP SP3 - read all the prerequisites for a successful installation
http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspxFree installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009. This support will cost U.S.$ 59 or by higher incident now.
Note: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.
Does that mean if my version of Windows is no longer supported?
http://Windows.Microsoft.com/en-us/Windows/Help/What-does-end-of-support-mean~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
REFERENCE DELL GX60 SFF
OK hear goes: Windows Xp Home edition, ver.2002 was SP2. Celeron (R) CPU 2.4 GHz intel 2.39 GHz 512 MB RAM
OK you can stop laughing now. I know its out of date and I know that I will eventually improve windows (getting another computer at the moment), is
not an option. Now, my relic worked fine good healthy and not too fast, but it got me where I should go. Mainly to pay my bills, print them
play games, etc.; you get the idea. somehow, well I ended up losing several programs and not knowing what I was done, I decided to reinstall
Windows XP and also to install SP3 (bad decision!). I didn't know that my copy of resettlement was not installing many drivers, you had to put them
yourself! Needless to say, I fumbled my way through, but I can not all sounds, oh I get this 'static' loud and clear when I turn the speakers off voltage
but that's all. I've tried everything. Also, when I go into Device Manager and open sound, video and game controllers, it shows
Audio codecs, Legacy Audio Drivers, Legacy devices of video Capture, media control and Codecs video (whatever that means).
And when I opened the system devices, there is a yellow exclamation point in front: Intel (R) E75/25/E7520 DMA controller - 3594. (phew!).
Well, I hope I gave you enough info.cause, I'm not that knowledgeable about computer technology. (I'm sure it's obvious LOL) In any case
Sir/Maam are unwilling to detach "sexist". I'll let you go, hope you can give me help on this issue, if I could I would just get a new one
but I am living young 71 on S.S. Disibility and simply ends. Not complaining do not. I am blessed. You have a wonderful and blessed
day.
Sincerely yours
Mrs. Fannie M. OwensGo to your computer manufacturer's support web site and search for drivers of devices in Windows XP for your specific model number.
If there are Windows XP drivers, then download to a folder on your hard drive and install all, beginning with the card mother/chipset drivers, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsUpdated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-usJ W Stuart: http://www.pagestart.com
-
Realtek Audio and/or a hidden processor
I have a Lenovo running Win XP hat has recently developed a sound problem: monoral information or center channel gets extirpated the normal stereo signal until it was for the pilot to his nominal: Realtek v. 5.10.0.5433.
I don't think Realtek is the problem, because it is own automatic test and the Center "Microsoft It Fit" don't find any problems. If it was a 'true' sound system, I would check all the components around the or other, but I can't ignore a little hidden codes in the string sound.
It is more worse a little bit. No light no matter who can throw on what to look for and where it would be appreciated to find.
Thanks in advance,
Dana
As my ancestors norsk might say, ' Oh, for stupid!
Realtek has a voice karaoke undo feature. Apparently, the young of the House found in his pokings randomly and click this button. I had steared to it, several times, not not cottoning on what I was watching. Randomly my own bag solves the problem.
Thank you
Dana
-
Windows XP Professional Windows XP Home Edition SP2 SP3?
I have Windows XP Professional Service Pack 3 installed on my computer and I want to do a clean install. My one CD is Windows XP Home Edition Service Pack 2.I put the CD in the drive and it does nothing. I don't know what means this reference 'boot' and when I hit F12, it does nothing.Can not install XP Home Service Pack 2 and then just download the 3 Service?Sorry if this question is already here, I might have missed.Hi Stacey51588,
OK, yes it's ok to change your version of XP pro to XP home service Pack 2 that it will update to service pack 3 later...
Regarding your F2 that will take you to the bios screen, and you should make sure that your computer is configured to boot from the cd first boot the boot second hdd... See the link on the way http://www.cyberwalker.com/article/28
If this is not enough, you let know what brand and model pc you have...
Concerning
GT4U
-
Had to format my hard drive and need SP3 for WIndows XP
I can't get a new computer just now. I had to format my hard drive. Now, I can't get SP3. However, SP3 was downloaded for Word 2002. Any suggestions?
Thank you, JAC
Different Service Packs for different products: Microsoft Windows XP and Microsoft Office Word XP (2002).
Showing you not only where to download them from, but how to find things.
In this case, using an Internet (Google) search engine to search for:
Service Pack 3 for "Windows XP".
And (if this link is clicked on it to see the results) you can see what has been found.
It would have resulted in the first link...
How to obtain the latest Windows XP service packHowever, the second link:
Windows XP Service Pack 3 network installation Package for IT professionals and developers... is everything (a single downloadable file can be installed to).
Download that direct link: Windows XP SP3
Once you have downloaded and the system in question, double-click it to run it, and you go. There are 90 + updates * after * SP3. ;-)
-
How to get and install SP3?
WHY CAN NOT DOWNLOAD JUST GO TO WINDOWS SP3? !!! WHERE IS IT EXACTLY!
Hi Warren70510,
You can manually download & install Service pack 3 from this link and check if the problem persists.
Note: System requirements to install Windows XP SP3
Reference: Learn how to install Windows XP Service Pack 3 (SP3)Hope the helps of information.
Please post back and we do know.
-
Poerege R700-15R and WXP SP3 - wireless function key does not work
Recently, I installed XP with SP3 on this laptop, but the wireless function key doesn't seem to work. All the others work without problem, but not this one.
Any ideas? I installed the driver of public services.
All keys FN + Fx work except FN + F8? What happen when you try to use the FN + F8 key combination? Is there a message?
You have installed all the stuff offered on the Toshiba download page?
-
The update that HP did on my computer - brand new HP with Windows 10 broke my wireless adapter. Intermittently, it disables it. Also internet is slow sometimes before all the locks to the top (I use the latest browser Chrome - same problem is in internet explore and edge). A few minutes after it crashes, the wireless disconnects and reconnects not without go into the control panel and clicking on the wireless adaper - disable - enable - repeatly until it goes back.
THIS HAPPENS EVERY DAY!
With that, I called and a technical support 'fixed' it but it always does. Clearly, this is the update. The wireless worked perfectly BEFORE this update. HP PLEASE FIX THIS AND GIVE US A NEW UPDATE!
Hello
If you're right about the update affecting Wi - Fi, and it has been fixed, and then reappeared, are you aware of what has been done to remedy this?
I think that perhaps a rollback (Restore Point prior) and temporarily disable the automatic updates and denying HP do updates either.
If you right-click on the card in the Device Manager and select Properties, you will be able to restore the pilot here.
You can try command line tools to eventually help in the command as administrator prompt, type these commands
netsh int ipv4 reset reset.log
ipconfig/release
ipconfig / renew
netsh int ipv6 reset reset.log
nbtstat - RRnetsh wlan show interfaces
ipconfig/flushdns
ipconfig/registerdns
netsh winsock reset catalogand then you may have disabled the problem.
-
NEITHER USB-232/4 works incorrectly with HP Quad CORE and XP SP3 and PPP
I replaced my dual core PC with XP SP3 with a QuadCORE HP XP SP3.
After that my NI USB 232/4 does not work with the PPP more.
Do this with COM1 of the HP works.
Solution: I replaced the NiSerial with Version 3.3 3.4 pilot.
Maybe you are looking for
-
Apple TV changes its name does not change in my Apple ID account?
Why, if I change the name of my Apple TV, didn't he change the name of the device in my Apple ID account?
-
Re: LED buttons no longer works
Hello There are seven symbols on my laptop near the power button. I have no idea what happened but can no longer use them.Really need your help
-
I'm having a problem understanding of logic in the attached vi. It is a part of a larger system, and I put the normal entries to the values provided by the other vi to test this vi. I do not understand is the value of the wire labeled "Output Incre
-
File Explorer Windows open in a window separate from the App
Want to open my computer to a particular folder location. Simply needs to open separately for the user to browse the files. How to do this? Thank you.
-
Hello, I got a usb device hp laptop to use as backup on my desk. The device was destroyed in a gesture, and no longer in use. My problem is every time I start the computer it is a very long pause while your search for the device software I get a mess