After a 'crash' and reinstall sp3, my computer turns in "safe" mode Help, please!

Similar Questions

• Window XP professinal machine crashed and does not even not start in safe mode.

  I installed "Spybot Search and Destroy" on my Windows XP Professional machine and started the application. Received a notice of bubble that the hard drive is nearly full, and then the computer froze. Did a hard reboot and went normally up until the point when the login screen appears normally then the screen went black and nothing worked except the mouse. Do you have another hard reboot and tried to start in windows safe mode. Once again, everything is going well until the point windows should have arisen screen then black again, except this time it says xp professional SP2 safe mode window. Or something simila across the top and the bottom of the screen. I don't have my original XP disc and have no idea of what would be the product key. The computer was purchased from a former employer, at the time of the purchase by them, it was a machine under windows 2000 and they have upgraded later to XP, most likely on the internet, so no XP cd. What are my options on the recovery of XP. And if that is not possible with the lack of information do you think I can upgrade the computer to Windows 7 or should I install original version. I know that the hard drive is good because I have another old machine windows 2000 can I put the hard drive in and it will read and write from the hard drive. Problem is you can't see half of the car becase the formatting of the file is different. a majority of the data I want to save the hard drive is on the side, that I don't see in the old machine.

  Joe,

  first put your hard drive of the computer that you have questions with in the computer that works well. delete or move data from the old hard drive to the other disk to free up space make sure you have about 5 GB minimum FREE on the old hard drive. Also run a virus scan and spyware on this hard drive. Then try to start the player of ard again and see if you can return to windows.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• I have Photoshop CS4 and I need to reinstall CD after a computer crash and reinstall Windows 7, but it will not be reinstalled I think because he used to completely uninstall. Can anyone help?

  I have Photoshop CS4 and I need to reinstall from CD after a computer crash and reinstall Windows 7 but it will not reinstall.

  This could be to uninstall because it used entirely from the control panel of Windows 7.  Can anyone help?

  Uninstall what you can the normal way via the Control Panel, and then use the CS cleanup tool.  Then try to reinstall. You might want to try an installation download rather than the disc if it continues to fail.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• COMPUTER CRASHED AND CANNOT ACCESS IT TO TURN IT OFF.  I TRY TO SIGN IN THE PROGRAMS THAT I DOWNLOADED ON A COMPUTER FROM 3.  WHAT DO I NEED TO DO?

  COMPUTER CRASHED AND CANNOT ACCESS IT TO TURN IT OFF.  I TRY TO SIGN IN THE PROGRAMS THAT I DOWNLOADED ON A COMPUTER FROM 3.  WHAT DO I NEED TO DO? I ALSO USE COMPUTER #2

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• My Hotmail watcher has stopped working since last week. I uninstalled and reinstalled several times different, but it did not help

  My Hotmail watcher has stopped working since last week. I uninstalled and reinstalled several times different, but it did not help

  Sorry, I should have told you how to install it.

  • Click on the orange button Firefox > Modules > Extensions > click the settings next to the bar (screwdriver and key intercroisées) search, click install the module file them find the file that you downloaded and it open it. It should bring up a box that says install now. Do so if she asks you to restart Firefox, do.

• I have a 7 GB of HDD in XP, there very few applications and no photo or music, but after cleaning everything I could think of, still 10% free space. Help, please.

  I have a 7 GB of HDD in XP, there very few applications and no photo or music, but after cleaning everything I could think of, still 10% free space. Help, please. I deleted all the old temporary files, all the old restore points, all files update of Windows that have been applied, but still can't below 10% free space. The unusual thing only I see, the defragmentation runs (when I force him) but still shows 62% of file Fragmentation?    Any help would be appreciated... Thank you.

  These can be useful:

  How to recover disk space on Windows Server 2008 and Windows XP computers

  http://www.Piriform.com/CCleaner

  John

• Hi there - already I bought a month of adobe stock (10 pictures per month) and cancelled it after a month. The system is not offered this choice. Help, please. It meets my needs, I won't be frozen for more than a month. Thank you

  Hi there - already I bought a month of adobe stock (10 pictures per month) and cancelled it after a month. The system is not offered this choice. Help, please. It meets my needs, I won't be frozen for more than a month. Thanks Jo

  Hi Joanne,

  Do you mean that you're not seen the monthly plan? Can please sign in the stock site, go you to: plan pricing and membership Adobe Stock | Adobe Stock and send me a screenshot of what you see? This will help me to solve your problem.

  Thank you.

  EBQ

• My ipod 5th generation is stuck by resetting the settings and I tried holding the power and the "home" button but has just the same. Also, I tried to sync it upward, so I tunes but it has not been recognized and I can't answer on my ipod. Help, please!

  My iPod 5th generation is stuck by resetting the settings and I tried holding the power and the "home" button but has just the same. Also, I tried to sync it upward, so I tunes but it has not been recognized and I can't answer on my iPod. Help, please!

  Try the remaining shares of:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Firefox crashes at startup, can not run except in safe mode

  When I try to open Firefox, it crashes immediately. I can only run in safe mode. I have not installed just recently I can think that it would affect. Here's the latest crash report 5 IDs:

  bp-a0f9cb98-1e79-4ade-9313-4b8f32130320
  bp-ce2412c3-4611-4586-a9af-4bce62130320
  bp-fab147c3-5ee3-46a5-8419-6f25e2130320
  bp-8661beba-9e1e-4430-a812-ee0092130320
  bp-4df6de63-61c8-4305-bd96-1a9272130320

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Vista system does not start after installation of windows update 10thFeb2010. Only start in safe mode. Windows Update does not open

  Updates to auto (windows Update) using.  Downloaded automatically update yesterday (10thFeb10) and when I shut my computer down it started to install them - as usuall.  However start my computer than this 11thFeb10 am and he began to run through regestry files when starting up.  Then it is impossible to load windows.  Just went to a blank screen.  Rebooted several times and were able to start it in safe mode.  Tried system restore but the same thing happens.  Obviously there was something to this update that 'changed' my computer and I'm not happy about it!  Also thought that there could be new updates (perhaps to fix the last update) but I can not even Windows Update to open it.  Tried online and he tells me that I have never downloaded updates and that none are available.

  I use Windows Ultimate x 86.  I hope someone can help me!

  Got a response from Ms.  Good all who have this problem - you have an ATI Radeon graphics card?  Driver is causing the conflict.  Uninstall all the stuff ATI goes on ATI web site and install the download of 'single driver '.  Reboot and then you can download and install other fancy programs that come with your graphics card.

• I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly.

  The Windows Installer

  I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?

  Hello

  -What you have done to try to solve the problem?
  -Did you change on your computer due to which the question has begun?

  I recommend you follow the steps in this article and see if the problem still occurs.

  How to solve the problems when you install or uninstall programs on a Windows computer.

• my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.

  my system does not start upwards - don't stop progression blue bar that goes round and round.  I can boot into safe mode and safe mode with networking mode.

  Hello

  As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to get the computer out of safe mode

  Remove my computer in Mode safe and return it to a Normal Mode

  * original title - get my computer out of safe MODE and return to a NORMAL MODE. I almost tried everything and I hate the thoughts to start over and lose all my info computers *.

  Remove my computer in Mode safe and return it to a Normal Mode

  Hey Sissyspkc1

  Follow the steps below

  Close all running programs and open the windows if you are back on the desktop.

  Click on the Start button (en).

  In the Start Menu () search box type msconfig and press enter on your keyboard.

  The System Configuration utility opens

  Click the Startup tab.

  Clear the check mark in the box secure boot and under the general tab, select the Normal startup option. One or the other of these options are not available

  Press apply, then the OK button.

  When the program prompts you to restart, allow it to do, and you should boot into normal mode in Windows Vista.

  Walter, the time zone traveller

• How to get the computer out of safe mode of power

  How to get the computer out of safe mode of power

  Hello jeffg56,

  I understand that you want to leave safe mode, follow the steps below:

  Exit Safe Mode:

  1. Click Start, type msconfig in the search field and press ENTER to open the System Configuration window.

  2. On the general tab of the System Configuration window, select Normal startup, and then click OK.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• I can't get my computer out of safe mode.

  I can't get my computer out of safe mode. Is there a step I'm missing that the selection of the normal mode? I continue to restart and hit the F12 key to enter the boot menu, I choose start in Normal Mode and it maintains safe boot mode.

  Start in safe mode > type msconfig in run > press enter > click normal startup > go to the Startup tab and uncheck secure boot