Realtek RTL8188CU wireless 802.11n USB 2.0 LAN adapter problems network

Similar Questions

• Realtek rtl8188su wireless lan update 802.11n usb 2.0 network adapter

  Realtek rtl8188su wireless lan update 802.11n usb 2.0 network adapter. What are the problems he says. is it necessary?

  See my response to your previous thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/latest-niviidia-driver-update-windows-7-64-geforce/2f0effbe-634b-e011-8dfc-68b599b31bf5

• Realtek RTL8187 Wireless 802. 11b / g 54Mbps USB 2.0 Network Adapter driver for windows 7 32 bit

  Hi I have a Realtek RTL8187 Wireless 802. 11b / g 54Mbps USB 2.0 Network Adapter and I have long ago through the internet and I can't find a driver in offline mode to install...

  any help?

  Hey

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=1&level=6&Conn=5&DownTypeID=3&GETDOWN=false&downloads=true

  or

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=1&level=6&Conn=5&DownTypeID=3&GETDOWN=false

• BCM94313HMGB combo wireless 802.11n and Bluetooth 3.0 half minicards UPgrade

  I recently bought your desktop pavilion pc p6-2378 with 8 64-bit windows.   Noticed that the Office lacks any wireless internet.

  Bought a BCM94313HMGB 802.11n and Bluetooth 3.0 high speed half mini-map and installed it.  Wireless driver works immediately.  But I donot see the radio bluetooth option anywhere.

  What Miss me?   Why didn't the radio bluetooth on the Device Manager?

  Yes. I saw that before posting.

  I used a mini-PCI card PCI-E and that caused the problem.  I inserted directly into the motherboard and bluetooth and wireless networking worked fine.

  Thank you.

• What would be the performance of these two 802.11n, router 802.11 g/b, when they are opereate under the mixed mode router with wireless 802.11n access point?

  ·         Range is increased to 802.11n device

  ·         Speed will increase for 802.11n device

  ·         Autonomy and performance will be increased by all the devices (802.11n, 802.11 g, 802 11b)

  Hi Sandeep,

  I suggest posting this question using the link below:

  Windows 7 IT PRO / networking

  calculation of the happy,

  B Eddie

• G6-2163SE Broadcom 4313GN 1 x 1 802.11b/g/n Wi - Fi adapter problem

  To connect to a wireless network I uninstall the driver and install it again and sometimes need a computer to reboot,

  It's a big Broblem, I use win 8

  Yes, thank you for your attention, reinstall the right driver solved my problem...

  Sorry again

• WiFi IEEE 802.11N/G/B Wireless USB 2.0 Wireless Lan USB Adapter WIFI 150Mbps adapter network driver

  where can I find the driver for my wireless card? Here is a link to his http://www.amazon.com/Wireless-802-11N-150Mbps-Network-Adapter/dp/B00333F2YU/ref=sr_1_8?s=electronics&ie=UTF8&qid=1364471402&sr=1-8 description

  Hi Brian,.

  Thanks for posting your question in the Microsoft Community forum. I understand that you want a driver for the wireless card. I'll help you with this problem.

  We can refer to this article and check if that helps.

  Install a wireless network card: http://windows.microsoft.com/en-in/windows-xp/help/networking/install-wireless-network-adapter

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• Extending Airport Extreme 802.11ac with older Airport Extreme 802.11n

  I need to extend the coverage of my wifi and I have an a 802.11ac AE and two former, 802.11n AE units and all are still functional.  Specifically, can the newest Airport Extreme 802.11ac extended by an older Airport Extreme 802.11n if it is connected by ethernet cable?  If it can be done, what setting (bridge mode or extend the network mode) should be used on the 802.11ac model?  Any other need to know the tips would be greatly appreciated as well.  Thank you...

  can the newest Airport Extreme 802.11ac be extended by an older Airport Extreme 802.11n if it is connected by ethernet cable?

  Yes, it's can... goal that the wireless "ac" will not be extended, of course. Here, I assume you think 802.11ac airport your 'main' airport and airport 802.11n as the airport of their extension.

  which parameter (bridge mode or extend the network mode) should be used on the 802.11ac model?

  You would not change the settings on the 802.11ac airport

  Reset an 802.11n AirPort Extreme back to factory default settings

  Connect an Ethernet cable from one of the three ports on the airport of 802.11ac for WAN "O" from the airport on the AirPort Extreme 802.11n which extend the LAN network<-->

  Configuration to use Apple "Assistant" to put in place the AirPort Extreme 802.11n and it will feature the correct Assembly for you.  Everything you really need to do is assign a name that you want to call the airport and "Wizard" will take care of everything else.

• device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic__

  device driver will be installed not for - realtek rtl8192e wireless lan 802.11n pci - e nic
  in troubleshooting, he said I must be connected to the internet, which I am connected via my LAN with yellow cord. If anyone knows how to solve this problem, it would be much appreciated. Ive called microsoft and they were lying to call back me within the hour and im still waiting for them :(

  Hello
  Direct link to the site Reltek with drivers below:
  Driver Realtek RTL8192E for Windows7 here

  Always the best choice is to use the drivers from your motherboard, desktop or mobile site.
  Second place should be device site producer.
  Last chance is updated for Windows.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• TouchSmart 520-1070UK: if I can replace the 802.11n wireless card in my 1070UK 520 for a dual band

  I've been updated by my cable company to a router to speed broadband to 200 'up to '. My old iPad connects to new 5G

  band but the HP Touchsmart is the single band 802.11n equipped Ralink card.

  Can I physically replace or add anything to connect to 5G?

  Hi there @tiggerchris

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for help on how to replace your existing wireless network adapter or add something to support the 5 GHz band. I'm happy to help you with this.

  Service and maintenance guides available and put at level of guides for this system offer no wireless adapters. The simplest solution I can suggest would be an adapter USB dual band WLAN.  There are many benefits to this choice. It is easier to install, it's easy to transfer to another device if necessary, and they can be very economical.

  I'd say a bit of research online for this type of device, to see what is available.

  I hope this helps.

• Window7 & RaLink 802.11n & problem of the Netgear WPN824v2 router wireless connection

  Kevin Hau recommends a new thread to solve individual problems.  It's here.  In February 2010, I bought a new LG X 130 notebook with Windows 7 starter pre-installed.  On the first day, connection Wi - Fi was intermittent, although wired connection works well.  Links for laptop to a Netgear WPN824 V2 router.  This router has a wired to my PC and wireless for Toshiba laptop of my wife.  These work perfectly.  The latter two works on Win 7 Home Premium.

  I put WEP as a security measure for the router and wireless connections.  The LG X 130 connect wirelessly from a cold start about 25% of the time.  When it is not connected, no problems.  It should be necessary to restart, otherwise the computer expires then all that I get is "no connection is available" and there is absolutely no way to reconnect.  Cold boot does not work and the computer seems to need to set off for several days before it will condescend to connect again.

  Internet gives hundreds of 'my solutions' research which none appear not to work.  All the drivers are up to date and the latest versions.  I tried without security, WPA, WPA2, as some people suggest that 802.11n does not support WEP.  I tried b & g 108Mbps mode rather than by car.  All of these more recent attempts have failed to get any connection. On a recent trip away, the laptop could find the hotel network, but not connect to it.  He made a useful paper weight!

  The problem is clearly intermittent.  The laptop was returned twice to LG.  For the first time, they reinstalled everything, got a connection and returned.  The second time, they got a call and returned.  I can get connections, but I can't keep or make it reliable.

  Grateful for a solution.

  everything indicates material ralink or driver at this point... here, I had a
  best answer.
   
  On Tuesday, May 11, 2010 13:51:30 + 0000, n1mccabe wrote:
   
  >
  >
  > I tried a USB NIC 802.11 b/g/n with WPA2 AES and so far it connects without any problems. Aaaaarrgh! I tried to roll back the driver without success.
  >
  > That you for your time and patience on this one. It is appreciated. Seen little faith, however, it may be appropriate to keep this current thread at least for a little while.
  >
  >
   

  Barb Bowman www.digitalmediaphile.com

• Pavilion P6 - 2176 s: update the ralink 802.11n wireless LAN card

  Receive a pop up saying that there is an update for ralink 802.11n wireless LAN card.

  Is - essential?

  Bad experience with the update of things that were not crucial.

  Thank you!

  Hello @css321,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post about the way your computer displays a pop-up message prompting you to update the installed wireless card. I'd be happy to help you in this case!

  If you encounter any issues connecting to a wireless network on your computer, I wouldn't count the update as crucial. If your computer is having problems connecting to the network, even if the problem is intermittent, it may be a good idea to install the update.

  I hope this helps, and if you have any questions or concerns do not hesitate to post back!

  See you soon

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• HP dv6-6c10us: HP dv6-6c10us Broadcom 802.11n wireless adapter does not work after windows 10 installed

  I have a laptop HP dv6-6c10us with a Broadcom 802.11n wireless adapter.  It worked fine on Win 7.  When I upgraded to win 10, it has stopped working.  The driver has not been updated since 06/02/13.

  Until the driver is updated by Broadcom or HP, this computer is now a desktop computer.

  Any suggestions on how to get the adapter wireless on Windows 10?

  I recommend you to go back and do a system restore to a point before started to install the automatic updates, and where worked the wireless.

  Then download this tool that stops updates to install automatically.

  https://support.Microsoft.com/en-us/KB/3073930

  Hide all of them and then install one by one until you find the one that is to destroy the wireless connection.

  When you have found the culprit just hide it again and it will not be installed.

  You can create a system restore point each time you install an update.

  Tedious, but you should get where you want to be.

• Satellite Pro A200-16YT - update wireless adapter card for 802.11n

  Satellite Pro A200-16YT (PSAE1E) with Windows XP Professional SP3 from the East.
  I tried to increase my existing 54 Mbps wireless network speed by replacing the Atheros AR5007-EG existing with 802.11n 802.11a/b/g more quick adapter.

  The Atheros driver is v9.2.0.439 (08/04/2011) it's later. I tried to install an Azurewave AR5BXB72 (Atheros AR5008) as a substitute, but without success. As well as trying the standard Windows wireless configuration, I used the Atheros Client Utility (ACU) which confirms that the card and the driver are installed and activated, but the radio does not, so no there is no association/connection to the wireless network!

  Reinstall the original AR5007 works without any problem. If someone experienced similar problems or can offer a solution, it would be greatly appreciated. Thank you

  Hello

  Not sure about this Wlan card but I read in the forum that some people had similar problems, allowing the new card Wlan.

  Check this thread for example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=253505

  It seems that the problem is related to the assignment of the WLan card pins.