rearranged furniture, now no audio w/live tv

Similar Questions

• Windows media player; I have a mpeg file played ok before the download Flash Player to move to another place; but now the audio wont play even if the video is very good

  I have a mpeg file played ok before the download Flash Player to move to another place; but now the audio wont play even if the video plays very well.  The mpeg file may was converted from another format mpeg before do me.

  Hello

  1. are you able to play the other mpegs successfully?
  2. what version of Windows Media Player do you use?

  I suspect that the file is corrupted.

  Method 1.
  Check if you can play the same video in a different media player.

  Method 2.
  You may need to check if the codecs work very well to play the file. Check if you have installed third party codecs. Uninstall them and re - install and then check.

  I hope this helps.

• Windows Media Center - No Audio on Live TV or recorded TV

  I have days searched through various forums and tried all suggested and no still no resolution.

  I have no sound when using TV or TV recorded in Windows Media Center in Vista Home Premium.  I checked all volume mixers, nothing is cut.  I reinstalled WinTV drivers and the latest audio drivers for my laptop.  Another post suggested to install a codec package, but the link provided is for Windows XP.  I searched a lot of Vista with no result.

  All other programs work perfectly.  It's very annoying.  Someone at - it suggestions?

  Hi Parvati,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  This can happen if the speaker settings are not configured correctly

  1. go in sounds in the control panel.

  2. click on speakers and select the Advanced tab.

  3. configure the settings of speakers correctly by turning off the computer take exclusive control of this device 'allow' in speaker properties

  To work around this problem and restore audio, follow these steps:

  1. press the Play button on the Windows Media Center remote control or on the multimedia keyboard.

  2. use the mouse to click on the Play button at the bottom of the video screen.

  3. press the Pause button and press the Play button on the Windows Media Center remote control or on the multimedia keyboard.

  4 resize the Windows Media Center window from mode full-screen mode to windowed mode or windowed mode full screen.

  When you use Media Center to watch live TV on a Windows Vista-based computer, you can't always hear the sound

  http://support.Microsoft.com/kb/929515

  When you use Windows Media Center to play live TV or a DVD on a Windows Vista-based computer, you do not hear sound after you wake the computer from sleep mode

  http://support.Microsoft.com/kb/942364

  Let us know how it works.

  Kind regards
  Support of yama - Microsoft.

  Visit our Forum of Microsoft answers Feedback and let us know what you think.

• haven't installed the latest updates now no audio

  I just updated the laptop and now no sound at all.

  Hello

  The "roll back" was the first thing I was going to suggest

  As it seems that the update problem is not just with the Audio driver, try the following.

  If you have Norton Internet Security installed, disable Norton Tamper Protection as described in step 2, on the link below.

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20091112171719EN&LN=en_US

  Once you're done, shut down the laptop.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  When it has loaded, on the Start Menu, click principally made programs, accessories, click System Tools and run the system restore.  Pick a point to restore before the updates that caused the problem have been applied (24 hours before if there is a point available) and then do the restore.  When you are finished, Windows will restart normally.

  Let me know the result.

  Kind regards

  DP - K

• Why I lose audio on live broadcasts

  I have windows 7 Adobe flashplayer 11 last Adobe reader installed and working properly, problem site allows the popup blocker. While listening to the live broadcast on Dirtvision.com (automotive site) my audio drops after a few minutes and I have to restart it and the same thing. My office is going to play very well on the same router? I did a scan of the window and found no problem

  Hello

  What browser do you use?

  If you use Internet Explorer, you can follow these steps and check if it helps.

  I suggest to optimize Internet Explorer and check to see if it helps.

  How to optimize Internet Explorer: http://support.Microsoft.com/kb/936213/no

  Warning:  Please note that reset it the settings of Internet Explorer running resets all settings defined by the user, including those set by the installed extensions, toolbars and other add-ons for IE by default. This includes all parameters of security, confidentiality and area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  See also: Flash games, video or audio does not work Windows

  http://helpx.Adobe.com/Flash-Player/KB/Flash-player-games-video-or.html

   

  I hope this helps!

• Horrible Interlacing issues. AVCHD format. I found a way around it but now have audio problems! CS4

  Hello

  OK, I tried a number of things to remove interlacing of the questions that I am haivng and it seems that I found a way to get a clean video.

  Here's what I do.

  Right-click on the video source in the time line and goes to the field ooptions and then selecting the option to deinterlace always.

  It works with the mode only export MPEG2-DVD. Other presets give me still horrible ineterlacing.

  Now, we the rendering/export is finished I get a good video, but the audio is not own separate file!

  What can I do for the audio and video together?

  Thanks in advance!

  Mark

  Hi watching this tutorial by Jeff Bellune...  It helped me a lot with my export to DVD.  I use 720 p 60 however, but watch the video I think it can help ya.

  http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html

  FYI - I have the same camera that I use for my house (and shoot 1080i60) stuff, and if I want to burn footage directly on DVD I use TMPGE and just to import all the clips in there and tell him to make a DVD MPEG 2 file and it looks great.  But it's just straight video, with no retouching.  But the DVD are superb.  I tried to import everything in first and just using the Media Encoder and say things to make a DVD MPEG 2 and they just don't look great.

  Good luck with it...

  Phil

• Accidentally plugged usb battery. Its now on Audio jacks are dead

  Hey guys,.

  Today, I have a battery of Vapir NO2 and noticed that he had the same charger as my mobile phone. I thought to myself, "well lets see if it charges it! ' and connected quickly and immediately recalls batteries should never be placed in a usb port on a computer. I turned my computer on look for the worst to find that the sound come out of my TV rather than my Turtle Beach. After having studied a bit, I determined the following.

  -The helmet works (tested on another computer.

  -my USB will be able to

  -USB can still transfer files

  -taken audio upper panel seem to be only records not

  -taken back panel audio record on the computer but don't play no sound

  -When you attempt to play sounds through sockets audio back panel, it sounds like the puffs of air out instead of sounds so that made me assume that I can have blown some sort of Cap on my motherboard, but I can't find.

  Hello

  1. You get the error message on the computer?
  2. The problem occurs only with a specific media player? If so, what Media Player do you use?
  3. What is the brand and model of the computer?

  First of all, I suggest you to check the status of the sound card driver in Device Manager.

  a. press the Windows key + X , and then select Device Manager.

  b. right click on the device, and then click Properties.

  c. on the device Properties dialog box general tab

  d. check the status of the device and let us know

  Is there a yellow triangle with an exclamation mark inside, then it indicates that there are some problems with it.

  You can consult the following Microsoft article and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• I responded to an inquiry and now my audio system plays again and again the same music

  I answered a survey of puzzle, and now I only get their music on my speakers. My system is Windows7 64 bit. How can I find my normal sound system? I am a fairly new user, so I don't know what to try.

  Deb, welcome to the forum.

  When a help request, you must always include the brand / model of the computer or the monitor. This information is necessary for us to review the specifications for them.

  You have rebooted the system?

• Reinstalled XP and now wireless & audio stopped working. HELP please.

  
  
  

• Rearrange quick access icons in Windows Live Mail

  I actually received a response to my question on: "that you can organize quick access icons? The answer of MS has been no.

  Even if you can not move them while on the bar, you can organize them as you wish. Delete them all and then put them on the taskbar in the order you want. As convenient as not being able to drag them around, but it works.

  It would be nice to be able to increase the size of the icons for those who may have a vision problem or an option for text titles.

  I like the new way to bring together all conversations and be able to collapse.

  Hi, Dferron,

  • Right-click anywhere on the toolbar and choose "Customize".
  • Opens the Customize toolbar dialog
  • In the drop-down "Icon Options" menu, choose "large icons" or "small icons".
  • Once you choose one or the other, Windows Mail updates the appearance of the toolbar in real time to allow you to get an overview of the evolution.
  • Once you are satisfied with the size of the icons, click on 'close' to return to your emails.

  http://www.freeemailtutorials.com/vistaWindowsMail/showHideCustomizeToolbarsInWindowsMail.php

  Quick Access toolbar icons are arranged by the addition of new icons.

• I RECENTLY HAD TO RESTART FROM DISK AND NOW MY AUDIO SYSTEM WILL NOT EMIT A SOUND SIGNAL

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computerREBOOT NOT of HIS
  • What you have already tried to fix the problemTRIED IN DOWNLOAD SOUND DRIVERS NOTHINGS WORKING AND YES SPEAKER CHORD EAST BRANCH

  Hello

  You have installed the drivers after the restart of the drive? If this is not the case, then install the drivers first using your disc of recovery of the driver if you have one, if you don't have one, then contact the manufacturer of your computer to a disc or download the drivers from their site. :-)

• Where to download LR4.1 RC1 now that RC2 is live?

  I'm struggling with a number of issues with RC2 LR4.1 that makes me want to go back to RC1. The problem is, I can't find anywhere more (and I didn't keep a copy when I downloaded it... Yes, I know...).

  Thanks for any help.

  Christian

  http://labsdownload.Adobe.com/pub/labs/Lightroom/4-1/lightroom4-1_rc1_win_032912.zip

• No audio and video stutters on live TV

  Original title: Windows XP Media Center:

  Windows XP Media Center: I get Audio and video recorded with no TV Audio of live TV and video blocks in short intervals with visible images, but images break sometimes.

  Update your tv tuner card, graphics and audio drivers.

  Visit the websites of these different manufacturers to download and install the latest compatible drivers.

  S.Sengupta Media Center MVP

• to remove an undesirable element of video/Audio, where the audio timeline in Windows Live Movie maker

  I want to delete a part of the clip but only from video timeline... replacing which I insert a still or anything else... is it possible in Windows Live Movie maker

  I want to delete a part of the clip but only from video timeline... replacing which I insert a still or anything else... is it possible in Windows Live Movie maker

  ==========================================
  Since this is a Forum for Vista... I'm guessing that you're running Vista?
  Vista Movie Maker 6 might be a better application for your task
  because it has a view of the timeline.

  In any case... the following links may be worth a visit:

  Sharing video and Audio - Windows Live Movie Maker
  http://www.YouTube.com/watch?v=jvsRKz2peOg

  How to split video files in Windows Live Movie Maker
  http://www.recipester.org/recipe:Split_Video_Files_in_Windows_Live_Movie_Maker_34299638

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I installed an update of HP driver audio, now does not.

  downloadde and installed an HP audio driver update, do not think that it installed successfully but now my audio doesn't work. is it possible to do a system restore on win 8.1?

  HP Pavilion 500-214

  Actionhero, welcome to the forum.

  Yes, it is possible to do a system restore.  Here's a guide that will help you in this.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.