Cannot install Vista due to the video/monitor

Similar Questions

• Cannot install vista updated or the updates of the application.

  I can't install all updates for vista and some applications. I was not able to install updates for about a year and I'm behind about 50 of them!  Here's what happens: I can select a (generally smaller) update download it and at what stage him "create restore point" appears nothing DON'T is PAST!  After 15 to 20 minutes, I'll try to close and the blue/green screen informs you that installing update 1 of 1.  The system hangs in this State for hours - if I leave - and usually pull the plug.  I disabled Norton antivirus, before and get the same result!  It's nerve racking.  Oh yes, I can't remove programs either!  I WAS able to install SP2.

  Hi Bill,

  No. , the "discussions" over attempts to solve the problem and I was excited about some of the suggestions of Ryan t...  The problem persists and I designed a word document to post on the site of s 'Windows BBS"asking for their HELP.   If I can get a consensus, this is what I intend to do.  The D partition on my machine is a picture of the machine "birth" @ gateway about 2.5 years ago.  Once I trust that I have my data backed up and all the DVD application on-site I'll reformat the C with D, operation of the gateway info.  Once I did this, I intend to install Win 7 and put Vista out of its misery!  I intend to install the 64 bit version of 7 and use the C partition for the operating system.  I understand that this is possible and should reduce to naught the tedious task of reinstalling the applications and data if a cleaning are always required again!

  Also, I have a second physical hard disk with partitions E F & containing my temp folder, data and photos.  As side note, I paid MSFT $60 a year ago, and their conclusion was re - install Vista - or punt if all else fails.   NOT THE ANSWER I WAS LOOKING FOR!

  Don't know when I will be able to jump through all these hoops and obstacles, but will post my 'experience' here!

  Thank you for your question and now know I'm NOT the only victim.    OH YES, have you TRIED SUGGESTIONS of RYAN T? THEY CAN WORK FOR YOU!

  Reduced

• Cannot install C++ due to the Error 1935

  Hello

  Yesterday, I downloaded the plugin to use in a recording program I've used for years, running the 32-bit version (a 64-bit version is available).  When you install the plugin from the trial, I got a message later, that I didn't write down, indicating that the installation was not successful.  I don't remember how the trail search online lead me to think, it was a problem with Microsoft Visual C++, but that's where I found myself.  To attempt to reinstall C++, I continually get error 1935.  I cleaned the registry, I "fixed" the framework, I made sure the service associated with the facilities of confidence is running, and yet I can't find any way to get x 64 C++ to install.  So, I uninstalled all instances of it and rebooted.  I can get x 86 to install, but that's all.  Because I deleted the previous instances of the c ++, my application will not open (citing that this mfc110u.dll is missing), and I am only a few weeks a deadline for a project that I had to have put together.  Apparently, the x 86 plugin does not cover x 32 and x 64 bit programs?

  I'm running a gateway DX4860 with 6 GB of RAM, 3.30 ghz, 64-bit and Windows 7 Service pack 1.  Unfortunately, I never got a Windows 7 disc with my computer and said just back upwards frequently.  I don't have any system, restore points I just record my music projects backed up on an external drive.

  I would be extremely grateful to all those who are likely to help him.

  Thank you

  Joe

  Hello Joe,

  Thanks for posting that ask you about Microsoft Community Forums.

  If you receive a 1935 error when you try to install the software, the Windows file system transaction log is corrupted.

  I suggest you to follow the below methods and check.

  Method 1:

  To correct this install error, you must clear the log.

  a. open an administrator command prompt: right click on start > all programs > Accessories > command prompt and select "Run as Administrator" and click "Allow" for the elevation prompt

  b. in the command prompt, type the following command:

  true fsutil resource setautoreset C:\

  c. which assumes that C: is the drive in which windows 7 is installed. If it is installed on another drive as D:, please change the appropriate drive letter.

  d. restart the system.

  e. install the software and check.

  If the problem persists, try Method 2.

  Method 2:
  Another cause of this error is an unsuccessful installation of Windows updates or packages custom MSI could have left on the faulty registry under HKEY_LOCAL_MACHINE\COMPONENTS keys.

  Please check if all windows updates are installed successfully

  Reference:

  Install Windows updates in Windows 7

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  If the question did not resolve, try Method 3.

  Method 3:
  You can uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ Redistributable Package and check if it helps.

  Step 1: To uninstall all versions of Microsoft Visual C++:

  a. press the Start button and select Control Panel, and then click programs and select programs and features.

  b. in the list, find him Package redistributable Microsoft Visual C++ and click it.

  c right-click on it and select Uninstall

  d. restart the computer.

  Step 2: Download and install redistributable Microsoft Visual versions of Package and check to see if it helps.

  Later supported Visual C++ downloads
  http://support.Microsoft.com/kb/2019667/en-us

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• Cannot install vista SP2. Go back to step 3 of 3 error E_FAIL (0x80004005)"?

  original title: cannot install vista SP2. Resets the return on step 3 of 3.

  I tried to install SP2 for vista, it fails. automatic update failed he proceeds to step 3 of 3 and go back. I tried the manual download, that there is too much. He is gone to step 3 3 100% and then looked back. has given an E_FAIL (0x80004005) error code please help because I can not install msn live messenger without SP2.  I have Service Pack 1 installed.

  IAM running windows Vista 32 bit, home premium.

  Try these institutions.

  http://support.Microsoft.com/kb/971204/

  http://support.Microsoft.com/kb/313222

  Go to control panel-> Windows Update control, click "Edit settings", then select "Allow all users to install updates on this computer" and click OK. Restart, then install SP2.

• Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

  I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

  Tried to check and repair disk permissions. This finished.

  Then tried to empty the trash again and got the same error 50 yet.

  I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

  I can't go in safe mode or in disk utility.

  Any suggestions on what to try?

  Thank you

  What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

• My pc cannot install this update received the automatic update system (KB2564958).

  Hello

  My pc cannot install this update received the automatic update system (KB2564958). Each time you start my system, a necessary update is displayed in the taskbar, but after installation and reboot of the system, this update appears once again, which indicates that the update has not been installed.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Cannot install Microsoft FixitCenter because the powershell download always fails!

  Download powershell from Windows xp

  Cannot install Microsoft FixitCenter because the powershell download always fails!

  Hello

  ·         Microsoft Fix it have you trying to run?

  ·         Is the question comes up with all this problem?

  For more specialized issues of Fixit assistance please post your query to Microsoft fix it Center forums:

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

• The add-on < partner name > - cannot install: impossible to validate the license online.

  Hi, I get the following in the creative cloud application error message:

  Installation impossible, impossible to validate the license online

  Error message

  The add-on < name of companion - > cannot install: impossible to validate the license online.

  
  

  
  Also, when I try to use the libraries in Adobe Illustrator, I get the following message is displayed:

  Sorry, we could not connect to the server

  How can I solve this problem?

  Thank you!

  Jamel.

  This error indicates usually that one of the following problems:

  • You are not connected to Creative CC Cloud Desktop App and/or Adobe site with the same Adobe ID modules. Please first make sure that you are connected to the Adobe website modules (top-right) and the desktop application CC (high button on the page of good settings, preferences, account) with the correct ID.
  • More than one user is logged in your Adobe software on your computer using an Adobe ID different from yourself, or indeed you have more than one Adobe ID that you used to connect to. It can also be as a result of general license file corruption. Please clear your browser cache.
  • You are behind a firewall that blocks our license server calls. Please try to disable your firewall, or try again in safe mode.

• Cannot install Windows 8, assuming that its due to the video card... Need help!

  Hi all, I'm terribly frustrated today. I think the video card, a brand specifically 6450 marked as a 7450 here, is at the origin of the problems. The pilot was a mess and when I updated and restarted windows 8 (using the stock drivers) then updated after hesitating to Windows 8. After I restarted my computer, windows 8 has been roasted and I couldn't access what anyone, I had to do a recovery install. I wonder if there are any suggestions as to what I can do here, would like any advice! Nick

  HI there - don't know why I don't post the model (h8-1227, a Pavilion), but regardless, the issue was not the video card.

  It's a seemingly simple, innocuous add-on I've used for over 2 years.

  Never heard of the Asus AI Charger?  It is used to help to "mount" the power to the USB ports on a computer, allowing an iPad draw enough power to recharge in FACT.  It has been a great feature to my computer.

  However such, it killed my first USB 3.0 ports, completely.  I would like to install the HP drivers and the USB port will work until I rebooted, then it stops.

  I completely misunderstood this as something that might have been originally, but here, I looked at the USB ports in the Device Manager and saw the tag HAVE charger which they are attached.

  Something SMALL, simple as it seems, is what was causing all that headache and frustration.  I probably lost more than 20 hours trying to solve a problem this stupid thing caused.  I even ended up buying a new video card, guess THAT's what the problem is here.

  What's happened is that the only TWO things I have installed in the computer were the new drivers for video card, Office and the charger HAVE stupid!

  Sometimes the simplest things are the most stupidly frustrating things!

• Satellite Pro M70-113: cannot install Vista graphics driver and lines appears on the display

  Hello

  I have satellite pro m70-113 with ati x 700 graphics card.

  When I installed vista, he installed the default drivers for the x 700 'mobility radeon x 700-microsft Corp.-WDDM '.

  I've updated the display drivers for vista, that released by toshiba 2 days back... but the driver is not updated to the latest version, only the catalyst control center is installed when I ran the update of the driver of toshiba.

  The problem is that whenever I put my laptop in standby or hibernation and resume... the screen shows thin lines vertical/horizontal... and I can't use the laptop... and I have to still put the system to sleep, just to hope that it is not blocking the screen this time...

  This problem is 25% of the time only when resume...

  This problem is not resolved by the update driver for toshiba has released a few days back... as is not installs the drivers (I can't even install the drivers with the option "update drivers" of Device Manager and select file driver update from toshiba.) It says windows find new driver, but could not install the driver... Contact the manufacturer...)

  This snap shows the problem... : http://img360.imageshack.us/img360/2783/12042007366copyod1.jpg

  I updated the driver from an earlier version of catalyst, as it is downloaded from the ati site before that toshiba has released the update... this time it updates some 8. XXX version but the screen problem remains...

  Second, this update of the driver leaves me not sleep my system... the process starts for a sleep, but go back to the locked screen without making sleep ever... so I have no choice to get stuck with the default Windows... drivers having only the problem of the screen... and not the problem of sleep...

  Anyone here with a solution?

  Thank you.

  Hello

  I have Satellite M70-159 and I noticed the same thing several times. For most Vista works well but I don't remember cases in which the described problem occurs. I was just curious on M70 Vista and have had no time to intensive testing.

  Anyway, it will be interesting to know if you have already updated the BIOS to the latest version 5.10. If this is not the case to do this and watch carefully if the problem persists.

• Cannot install Vista on the Qosmio X 300

  I have a problem installing Windows Vista Home Premium on my Qosmio X 300!
  When I start the installation of windows all seams to be ok, but when I get home at the end of the installation, stop!
  I don't know what to do.

  Please help me

  Have you tried to install Vista several times?
  No facilities procedure stops on the same question over and over again?
  Do you use the installation of Vista 32 bit or 64 bit?

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Cannot install Vista SP2 (or any other update) even after the KB947821 application

  I tried for months getting my wife's cell phone to install SP2 and other updates of security, but they keep failing.  Microsoft's response is to use the analysis tool... but it does not work.

  Unlike some others, the tool reports having installed successfully (KB947821v12) but I then try to install SP2 (or other updates from windows update) and I get an error message.

  The system is a Dell inspiron 1525 Dual core * address email is removed from the privacy * and 3 GB RAM under Vista Home Premium, SP1 (32-bit).  System Norton antivirus installed, licensed and fully updated. I've removed almost any other piece of software besides the pilots, office 2007, and Norton, run a registry cleaning tool, defragmented the drive hard, etc.  Still getting the same error.

  Try to install SP2 (KB948465) starting from the .exe downloaded from microsoft (have tried so many times, I couldn't wait to download each time!), gives me the message "Installtion failed", details show the 0x800f081f error code

  Through windows update, I have the following four updates available, I have several times to install these and get the error code 8007371B for all:

  • KB2508272 (Cumulative security update)
  • IE8 - 8007371B (also tried to install IE8 by uploading it directly on the site of ms, as opposed to windows update)
  • KB2079403 (security update)
  • KB956250 (.net 3.5 Sp1 update)
  • KB68930 (Windows PowerShell 2.0)

  Come to be able to install KB890830 today (27/04/2011), but even after installing that others do not work!

  8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  One or more required members of the transaction are not present.

  'Something' interferes with operations in Windows\winsxs. This 'thing' is Norton or malware. Have you checked one of the logs generated by the update system (or CheckSUR) tool when he was executed?
  They are located in and named it.

  Windows\Logs\CBS\CheckSUR.log
  Windows\Logs\CBS\CheckSUR.persist.log

  It looks like you will need to either Configure the system to boot or uninstall Norton, then run is the removal tool, in order to resolve the error, 8007371 B, elrao.

  At the moment, it may be too late to solve the inconsistencies that are produce in winsxs. Your other options are-

  (1) contact Microsoft for assistance in obtaining the security updates installed (KB2508272 or KB2079403). However, KB2078403 was published last summer, and should be installed now. This isn't a good sign.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Cannot install Vista Business on Portege M400 - IDE issues

  Hi guys... I am looking for your help.

  I downloaded all the new Vista drivers avaiable from Toshiba in support of the new installation of Vista business on my old Portege M400, that came preloaded with a version of XP Tablet and kept their loan on a CD.

  I also upgraded the version of the ACPI BIOS to the latest available 3.80.

  I insert the first CD of Vista professional and do a boot. (I also have a n upgrade Vista Business CD but I want to do a clean install).
  I go past the first steps and choose Install.
  I am faced with an error message "no disk has been found. "Click on load a driver to provide a device for installing mass storage.

  Looks like Vista is not able to see the IDE drive to the edge and it's a driver problem.

  I touched the "Rescan" button available on the windows installation and another message appears: "no device drivers were found. Make sure that the installation media contains the correct driver, and then click OK. »

  Currently loaded on the XP: currently loaded poster IDE ATA/ATAPI controllers like Device Manager: "Intel (R) 82801 G (ICH7 Family) Ultra ATA Storage Controllers and primary IDE channel."

  Hard drives shown are: Toshiba RAID SCSI Disk Device LD0

  Pls tell, what new drivers since available downloads of drivers Vista for my model 400 ML PPM40E, should I choose here for my Vista installation recognizes the disk available?

  Hello

  It is very easy to solve this problem.
  If you would look on the page of the European driver Toshiba (Portege M400 section), then you will notice that a RAID driver is available for this model of laptop.

  Impossible to install Vista because it cannot find the HARD drive due to lack of RAID driver!

  You must install the RAID driver first and then you can proceed with the installation of Vista.
  As far as I know the Vista installation accepting the USB flash key you can use this key to include the RAID driver.

  Hope I could give some useful advice.

  Cheers mate

• Cannot install Windows XP on the Qosmio F50-108

  I got the Qosmio F50-108 with Vista.

  I dislike Vista so I tried to install XP.
  Unfrtunatelly, I get a BSOD every time XP takes over for the first time (startup). Usually, when there is a problem of sata, XP tells you while there's no HARD drive, but I do not get this message, I get a BSOD.
  I don't know why there is no support for XP in fact I know that Microsoft paid toshiba to stop supporting Windows XP.

  Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.

  I know that there is a possibility, I know that an update of the bios might help, but toshiba does not.
  Dear Sirs to Toshiba, I know you know what I have to do in order to get XP running on a Toshiba computer, so please, help me.

  Hi guys

  You can install XP on each laptop Toshiba. But you knew how! : D

  Your Windows XP CD must contain the SP2. This is important because the new laptops no matter which manufacturer need SP2 patches due to some hardware compatibility issues!
  Without the SP2, you will receive a BSOD!

  Then, the new notebooks support SATA drives hard and new SATA controllers!
  Windows XP and Vista operating systems do not contain the SATA drivers, and therefore you must include first before running the installer of the OS.
  Or you can disable the SATA in the BIOS. You will need to switch from AHCI to compatibility mode.

  Then, you must install the XP window successfully.

  So finally, I must say that I really don't understand these comments like this:
  > Is the thing that drives me crazy, YOU CAN INSTALL WIN XP ON EVERY APPLE COMPUTER MACINTOSH, but you can't do it with a Toshiba.
  OK, I see you're frustrated because you cannot install the operating system, but he must know that this is not a problem of laptop, but it is only a case or a knowledge!
  So maybe you should learn more about new technologies and you'll know how things are working. ;)

  To all here-> greetings & peace;)