Reboot cold HP model # 1536dnf

Similar Questions

• The computer hangs after reboot cold.

  I just bought a HP Officejet AIO 6310xi. After several tests the OEM package will install not (installation failure). From the Web site and out of the CD/DVD included.

  I let MS-Vista install drivers and at least the printer works fine until reboot. Then the system freezes upward. Once I have turned the printer off and restart again the computer starts no prob. I have 6300 drivers and suspect that the drivers are up-to-date and incompatible with MS Vista. My computer is only a year old and during the inspection of the hub USB the draw appears in the settings (below 500 mha).

  The cable is less than 9 feet long. I have enough computer resources including backbone RAM and HD space.

  Is there anyway that I can get Vista drivers for this printer only without going through an arduous process for a long time?

  Any advice will be appreciated.

  It seems that the USB driver are to blame. But after I re-installed the new drivers of hub USB the computer always freezes the re-boot. It is not the most recent, I have found yet. The bios does not seem to be a problem because it is a Dec 2006 re - build. I guess it's a matter of waiting until the USB hub drivers are updated.

• LaserJet 3 in 1, model 1536dnf MFP

  I get power memory warning.  What is - this and what I would do.

  Hello

  On the same error, please follow the HP document

  http://support.HP.com/us-en/document/c02484074

  This error appears if the printer does not detect the toner, reffer to the peak and clean the contact of ink and the

  even inside the printer where the toner sits

  

• HP Laser Jet 8100 DN: Need help to install Hp Laser Jet 8100 DN

  I am trying to install a HP 8100 DN on my Dell Inspiron 3847 with NO LUCK.  I use a cable to a USB 2.0 port.

  When I connect the printer to the USB port and go on currencies and printers it does not appear as a printer, but as an 'unspecified '.

  USB printing support.  Then when I try to print a test page, I get an error message saying that printer is an older model and will not work in a USB 3.0 port and I should change for a 2.0 port.  BUT it is already in a 2.0 port.

  I really need a bit of his counselor here.  I really need this printer work.  I went to the HP website and tried to download the universal driver, but that didn't work.

  Help.

  First off you are not into a USB 2.0 port.  Your card is a usb 2.0 device and you are connect on the USB 3.0 computer.  Most of the ports are compatible but not all.  Maybe there is another way.  You have a router that you use for the internet and is located in the same room as the printer.  If it's the printer should have a network card and you should be able to connect the printer to the router, do a reboot cold to find a good address and then use this ip address to connect the printer to the computer over the network.

• HP LaserJet 1300n web manage password

  I have a LaserJet 1300n that I manage the Web. However, a password was set on it and the previous system administrator never documented it. Is there a way I can clear the password by removing a jumper PIN or something like that? If so, where that PIN is located? I took the panels the printer off the power but can't see anything on the circuit that looks like a jumper PIN. Any help is appreciated.

  You can't do it with just about any rider, but you can do a reboot cold on the printer and will hopefully all empty.

  I do not have access to the manual right this moment, but I found the following online:

  These smaller models have either have a
  module network connected via a USB cable or
  It is directly connected to the rear. In both cases
  you will see a small black button on the device. If
  It is connected with a USB cable, there is a
  plugged AC adapter. Unplug it
  power adapter hold down the black button and
  reconnect the power, press and hold the button for
  10 seconds, the lights on the device
  Flash and then stay on. Once they are on
  You can press the black button quickly and you will have
  get a configuration page.
  If the module is directly in the printer using the
  same procedure but turn the printer off and then
  turn it back on by holding the small black button located in.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• Satellite Pro A30: after disk HARD replacing the BIOS does not see DVD or HARD disk

  Hello

  I bought a new Pro A30 of Satellite earlier.
  Shortly after, I noticed the system sometimes
  would freeze, with a rattling of the HD.
  A reboot cold was the only solution.
  I was told to replace the HD I did but the
  problem persisted with the new HD.

  I tried a known working HD and the problem still persisted.
  At this point, the warranty period has increased.
  Frost started happening more regularly, and
  now, the BIOS does not recognize the HD player or DVD.
  It starts and then try to boot from the network,
  because he doesn't have a HD or DVD player.

  At this point, I think I need a new system board.
  Someone at - it other advice or seen this problem
  before?

  Thank you
  Ray

  Hello

  What happens if you remove the CD/DVD drive or the HARD drive?
  The laptop recognizes one of these devices?
  Have you used the devices recommended by Toshiba?

  in any case, this seems very strange and the dysfunction of the motherboard is not impossible

• Indicator panel blue LED front M9040N steady mode 'sleep'

  HP Pavilion Elite M9040N running Windows 7.  Recently, the blue led on the front panel began to stay lit continuously when the computer is in "sleep".  In the past, the blue indicator would rarely stay on mode 'sleep', but a reboot cold could solve the problem.  Recently, I tried to turn off the PC and remove the power cord, and then restart after plugging in the power cord.  However, the remaining blue light on when in mode "Eve".  How can I get the blue LED indicator turns off when the computer is in mode 'sleep'?  TIA.

  Go to the control panel; Device Manager; Click on USB wireless 802. 11 b/g adapter. Click on the tab advanced; the value Carrier Detect, Radio on / off and values Smart Scan to 'Activate' (which disables these features).  Set the appropriate values on "Disable" to help as needed.

• Time Machine is not not in the IOS 10.11 (El Capitan)

  Update to IOS 10.11 from the ReadyNAS Monte drive is no longer, and Timemaching can not find the disc. I tried to shoot the sequence to stop, restart, re-enable option option but again, it will not mount in the IOS. IOS shows the ReadyNAS as a shared device and can be accessed without problem, read and write on it is also very well my MAC and Media Streamer, it's just the Mount of Time Machine that does not work. I tried everything short of a factory reset, which is expected after a config if (a lot of actions to put in place otherwise) ideas, I tried all the normal things.

  It seems that it was a permissions problem, the new OS X worm 10.11 has done away with the option to repair permissions in Disk Manager, don't know why. I have tried to disable time machine, but that the disc is not found, it did not appear as a disk. Reboot cold as the NV2 + with the Mac on correction of the problem that the NAS is now again appear in the finder under shared devices. Don't know why he lost the permissions after the upgrade, and I didn't have to restart the NAS server immediately she worked very well with my iPhone and media streamer.

• forgotten password ews on officejet color flowMFP x 585

  I was verbally this password.  The employee is no longer with the company... I need to get and do a few admin maintenance but may not without this password.  I did a reset to factory default, but which is not reset everything.  Help, please!

  Hello, in this case you may need to do a cold reset via the PXE menu. Factory reset will not do the trick, but a reboot cold should erase all settings, on the side is that you'll need to haunted configurations after adjustment. If you know not how to enter the menu of PXE, power off the printer, power, once you see the logo of HP in the center of the screen you press the logo (not up to the Center), you click the HP logo and menu PXE, JUST make sure that you all in this menu.

  I hope this helps...

• Windows Vista update keeps freezing

  I can't download updates. Be it, via the updates Panel or start menu. my computer hangs or displays the window to come but that's it. I have the reminder keep poppin saying I need to update, but the damn thing won't let me. I even tried to do it manually, same problem. It's not my firewall or any other security stuff, I already tried D.L with everything turned off.

  Thanks if there is someone who can actually help them, God knows that Microsoft won't!

  Just another problem with windows that gives me envy, I bought a Mac!

  Hello sionnaine, welcome.

  Although these steps are quite thorough, I recommend trying to see if it solves your problem:

  {THE PHASE 1}

  1. click on START
  2 type "Notepad" (without the quotes) and press ENTER. For Windows XP, you must first click on 'run '.
  3. copy everything between the two lines dotted and ahead of them in the Notepad window

  COPY EVERYTHING BELOW THIS LINE (DO NOT INCLUDE THE ACTUAL LINE)
  ----------------------------------------------------------------

  net stop wuauserv Regsvr32 wups2.dll/s Regsvr32 licdll.dll/s Regsvr32 regwizc.dll /s regsvr32 msxml.dll/s regsvr32 msxml2.dll Kbps regsvr32 msxml3.dll/s regsvr32 comcat.dll/s regsvr32 shdoc401.dll/s regsvr32 shdoc401.dll/i/s regsvr32 asctrls.ocx/s regsvr32 /s of oleaut32.dll regsvr32 shdocvw.dll/i/s regsvr32 shdocvw.dll/s regsvr32 browseui.dll/s regsvr32 browseui.dll/i/s regsvr32 msrating.dll/s regsvr32 mlang.dll /s regsvr32 hlink.dll /s regsvr32 mshtmled.dll/s regsvr32 urlmon.dll/s regsvr32 plugin.ocx/s regsvr32 sendmail.dll/s regsvr32 scrobj.dll/s regsvr32 mmefxe.ocx/s regsvr32 corpol.dll/s regsvr32 jscript.dll/s regsvr32 msxml.dll/s regsvr32 imgutil.dll/s regsvr32 thumbvw.dll/s regsvr32 cryptext.dll/s regsvr32 rsabase.dll/s regsvr32 inseng.dll/s regsvr32 iesetup.dll/i/s regsvr32 cryptdlg.dll/s regsvr32 actxprxy.dll/s regsvr32 dispex.dll/s regsvr32 occache.dll/s regsvr32 occache.dll/i/s regsvr32 iepeers.dll/s regsvr32 urlmon.dll/i/s regsvr32 cdfview.dll/s regsvr32 webcheck.dll/s regsvr32 mobsync.dll/s regsvr32 pngfilt.dll/s regsvr32 licmgr10.dll/s regsvr32 icmfilter.dll/s regsvr32 /s of hhctrl.ocx regsvr32 /s c:\windows\system32\inetcfg.dll regsvr32 tdc.ocx/s regsvr32 MSR2C. DLL/s regsvr32 msident.dll/s regsvr32 msieftp.dll/s regsvr32 xmsconf.ocx/s regsvr32 c:\windows\system32\ils.dll/s regsvr32 /s c:\windows\system32\msoeacct.dll regsvr32 inetcomm.dll /s regsvr32 msdxm.ocx /s regsvr32 dxmasf.dll/s regsvr32 l3codecx.ax/s regsvr32 acelpdec.ax/s regsvr32 mpg4ds32.ax/s regsvr32 voxmsdec.ax/s regsvr32 danim.dll/s regsvr32 Daxctle.ocx/s regsvr32 lmrt.dll/s regsvr32 datime.dll/s regsvr32 dxtrans.dll/s regsvr32 dxtmsft.dll/s regsvr32 WEBPOST. DLL/s regsvr32 WPWIZDLL. DLL/s regsvr32 POSTWPP. DLL/s regsvr32 CRSWPP. DLL/s regsvr32 FTPWPP. DLL/s regsvr32 FPWPP. DLL/s regsvr32 WUAPI. DLL/s regsvr32 WUAUENG. DLL/s regsvr32 ATL DLL/s regsvr32 WUCLTUI. DLL/s regsvr32 STINKS. DLL/s regsvr32 WUWEB. DLL/s regsvr32 wshom.ocx/s regsvr32 wshext.dll/s regsvr32 vbscript.dll/s regsvr32 scrrun.dll mstinit.exe/setup/s regsvr32 msnsspc.dll/SspcCreateSspiReg/s regsvr32 msapsspc.dll/SspcCreateSspiReg/s regsvr32 c:\windows\system32\wups.dll/s regsvr32 c:\windows\system32\wuaueng.dll/s regsvr32 c:\windows\system32\dllcache\wucltui.dll/s regsvr32 wuweb.dll/s regsvr32 msxml.dll/s regsvr32 msxml2.dll Kbps regsvr32 msxml3.dll/s regsvr32 urlmon.dll/s regsvr32 initpki.dll/s regsvr32 mssip32.dll/s regsvr32 wintrust.dll/s regsvr32 dssenh.dll/s regsvr32 rsaenh.dll/s regsvr32 gpkcsp.dll/s regsvr32 sccbase.dll/s regsvr32 slbcsp.dll/s regsvr32 cryptdlg.dll/s regsvr32 jscript.dll/s net start wuauserv

  ----------------------------------------------------------------
  COPY EVERYTHING ABOVE THIS LINE (DO NOT INCLUDE THE ACTUAL LINE)

  4. click on file > save as
  5. change the file type in the drop-down "all files".
  6 make the name of the file "UpdateFix.bat" (without the quotes)
  7. save the file on your desktop or somewhere easy to access
  8. close among all open applications and go where the file was saved
  9. right click on the UpdateFix.bat file and select 'run as administrator '.
  10. the batch file runs a long list of commands. The process may take several minutes
  11. once the process is complete, restart your computer

  {THE PHASE 2}

  1. go in:

  http://download.windowsupdate.com/v7/WindowsUpdate/redist/standalone/WindowsUpdateAgent30-x86.exe

  2. save the file on your drive Local (c). If you have difficulties to navigation to this place, you can get to it by going to 'Computer' or 'My computer' > disc Local (c)

  3. click on START
  4. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '. For Windows XP, you must first click on 'run '.

  5 type "/wuforce C:\WindowsUpdateAgent30-x86.exe" (without the quotes) and press enter

  * IMPORTANT: There is a space between 'C:\WindowsUpdateAgent30-x86.exe' and ' / wuforce'.

  6. after installation, go to:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  7. follow the instructions to reinstall Windows Installer 4.5 Redistributable
  8. after installation, RESTART YOUR COMPUTER

  * After the restart, turn your computer completely off and then back on (Yes, it would now be an additional reboot (cold boot))

  After the above steps, try to use Windows Update

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• P3015X HP: HP P3015X unable to solve Offline

  I have a question where my printer shows offline and it is connected to the network. It's on and unresponsive. I tried to solve the problem but to no avail. I was not able to print for some time. Need help solve this problem. See example 1 below.

  A note: when I disconnected the network then reconnected it don't have pick up address and showed print in the print dialog box. Only nothing to print later.  Below, for example 2.

  In example 3, it shows the printer offline, even though the printer is turned on and connected to the network. Even after a repair he shows he still does not respond. See below.

  Example 1

  

  Example 2

  

  Example 3

  

  You can print anything in the reports menu on the printer.  If this is not the case, what is the message on the control panel of the printer.  I would try with only power connected to the printer and unplug the network cable.  You can also perform a cold reset instructions below.  After that the cold reset the printer is an ip address using bootp or dhcp. Use the new address to load the printer as local tcp/ip printer and see if the computer detects the printer and load the driver.

  Reset of the cold product
  A reboot cold unlocks menus that have been previously locked and defines control all the Panel menu items
  (including parameters EIO) back to factory default. However, it does not clear the values of the function
  mode functions menu page 259 (such as the serial number and the page number).
  NOTE: Before you perform a cold reset, print a configuration page and a menu card. Use the information
  on the Setup page to reset all configuration values customer-set product reset cold
  procedural changes.
  1. turn off the product.
  2. turn on the product. When the memory count starts, press and hold the OK button. Continue
  pressing the OK button until all three product control panel lights flash once, then rest
  on. It may take up to 10 seconds.
  3. after the message SELECT LANGUAGE appears on the screen, press the key or the
  button until that COLD RESET is highlighted.
  4. press the OK button. The product performs a cold reboot and then continues its power on sequence.
  5. check all I/O settings and reset all values to configuration client-game product.

• ABC causes system freeze

  I would be very grateful if someone could please tell me how to troubleshoot the cause of a system freeze.

  After that a BSOD caused by the premature elimination of a DVD of my d: drive, a program that I use frequently, ABC, was originally a complete system to freeze any moment, I try to run... it is Exact Audio Copy, a program that allows you to burn a cd, content analysis of files for loss/lossless music.  The only way to address the gel is through reboot cold.

  Here are the steps that I took so far... and maybe this will give you an idea:

  1. I uninstalled, but when I tried to re-install it ALSO caused a freezing of the system.

  2. in Safe Mode, I was able to reinstall them and run the program without problem.

  3. after the installation in Mode safe, but chasing after systematic startup, the system froze.

  So, I assume that there is a driver conflict...

  EventViewer does not seem to grasp the issue... nothing showed up.

  Are there other ways to understand the question?

  I am running XP Pro SP3, all the installed updates, on a Dell Vostro 220 s computers.

  Thanks a lot if someone can help me with this.

  Pter

  Just note if EAC still causes crashes while all other programs/processes are not running. If this is the case, then it has a bug or there may be a problem with one of your drivers. If there is no blocking, systematically add pack programs/process until there is a blockage. Essentially, you need to use the process of elimination until you isoliez the villain.

  Start by adding half back and then see if there is a blockage or not. You'll understand!

• MTD-0002 error

  TI 1520 card reader works fine with 256 MB PCMCIA cards. I can start with the card in the drive and the drive appears in my computer properly as a removable disk. XP Pro with Service Pack 3. Device Manager shows two entries 'Texas Instruments PCI-1520 CardBus Controller.

  But there is a problem with 2 GB PCMCIA cards. On a cold reboot, there is an error of MTD-0002 and the card is not recognized. Poster "PCMCIA MTD-0002" Device Manager Device Manager displays also the two headings 'Texas Instruments PCI-1520 CardBus Controller. Eject the fact of the map that the "PCMCIA MTD-0002" disappear from the Device Manager and reinsert allow the card to be recognized as a removable disk. After a reboot hot, the card is always properly recognized as a remoovable drive. A reboot cold you're the only time when the problem occurs. It is on a remote PC so eject and reinsert the card on a cold reboot are not practical.

  Hi rarhodes,
   
  If you receive an error of MTD-0002 or other unknown PC Card problem this means that the BIOS is unable to allocate the resources of memory to the card.
  A mismatch occurred causing the PC to be badly detected card. There is an upgrade of the BIOS Basic Input Output System () that deals with this issue of the OEM/computer manufacturer.
   
  Contact the manufacturer for the same thing.
   

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

• Vista business operating system startup

  When that I start my computer from a cold start (day before) he hangs at the Welcome screen.  Then I have to hit CTRL ALT DELETE to complete the trunk upwards.  The computer seems to work fine after that.  If I do a reboot it works normal.
  What do you think could be the problem?

  Hi swede922,

  A hard reboot (also known as a cold reboot, cold start or cold start) restarts the computer without first accomplishing all shutdown procedure.

  The computer may cling to the Welcome screen because the file system would be in a impure State. Normally, an automatic scan of disk file system structures will be before the start of normal operation.

  For more information, see the link below

  Turn off your computer properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/turning-off-your-computer-properly

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Twain_32.dll error in Windows 7

  I put it under "Windows 7 Pro Twain error" but no answer - so I'll try again.

  I have a problem with a player wireless network Epson Twain_32.dll. With this scanner you apparently have no driver in itself if you seem to be impossible to remove the driver, you must remove the program from the list of programs and then re-load the Analyzer disk from the supplier program.

  Whenever I do and then try to scan, I get "missing or damaged Twain_32.dll".

  The provider insists that it is a Windows problem.

  According to responses to other similar topics in this forum I renamed (rather than deleted) the Windows/Twain_32 folder and there is also a Windows/Twain_32.dll file that I also renamed.

  I rebooted (cold) and get the same problem.

  I see that somehow a new Windows\Twain_32 file has been generated, but is no longer a Windows\Twain_32.dll file C:\Windows\.

  I am at a loss I can then do with this machine.

  Please help if you can!

  Hi Frank,.

  Thanks for posting your query in Microsoft Community.

  Let's try the methods below and check.

  Method 1: Rebuilding the icon cache

  a. in Windows Explorer, open the Windows folder.
  b. remove all files starting with 'Twain' or "Twunk" (for example, Twain_32.dll).
  c. remove all files starting with "Twain" (for example, Twain_32).

  d. restart Windows.

  e. the icon cache has been rebuilt.

  Method 2: Try to run the installation in a clean boot state and check if it helps.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.