Rebuild the Eclipse project

Similar Questions

• Add JAD to the Eclipse project - how?

  I develop for BB 9000 (bold). I have the eJDE 1.0.0.67 installed with the OS pack 4.6.0.19 and 9000 Simulator.

  I work in a workspace BB (as far as I know, the option "Activate for BlackBerry" is checked in the Project menu).

  Eclipse continues crushing my JAD file when I am debugging the application. Since I have some custom properties in the JAD, so I need Eclipse to be used during the generation of the project.

  All around the forum, I hear that I need to add the JAD to the project. How can I do?

  MSohm - this method, I cannot selectively add single files.

  I have however to mark the two check boxes (don't build and the file is generated) in the menu BlackBerry file properties (right click on the JAD-> properties). Even though I have no idea what are these boxes, which seems to allow the application to read of the JAD. Is this a valid solution, or I cause me trouble elsewhere?

• How to increase the application version number in the eclipse runtime Android plugin

  I use BlackBerry Android plugin eclipse runtime to code sign my application. She is successful the first time, later I changed some code and code sign again and error

  Error: Code signing request failed because this file was previously signed.    .bar //dist/Android 2.3.1 ------.bar BlackBerry previously signed

  Then, I read a few post on this forum and find a version in .xml number must be increased to fix my mistake, but I can't find such a file and the version number in the eclipse project. He would be grateful if someone can tell me how to increase the version number in a project created by BlackBerry Android plugin eclipse runtime.

  You must edit the AndroidManifest.xml file you will find in the root of the project in Eclipse.

  Just increase the parameter 1 versionCode.

  http://developer.Android.com/Guide/publishing/versioning.html

• The Eclipse SDK for Oracle Utilities SDK 2.2 configuration error

  Hello.
  
  I want to install a workstation development corporate tax management. I followed the installation guide for up and down.
  
  The application server is ok, the SDK seems to be OK.
  I ran "configureEclipse.exe" and makes manual configurations - as the install guide - readings. The eclipse project has been created, but it has 2 missing libraries.
  When I opened eclipse, it shows the following errors:
  
  Project EclipseProject220 is missing required library: "lib/ojdbc5-11.1.0.6.0.jar."
  Project EclipseProject220 is missing required library: "lib/spl-ccb-2.2.0.jar."
  
  My question is ¿where can I get these jar files?
  
  
  ------------------------------
  On the environment:
  The development workstation is a notebook under Windows 2003 server, with ETM v2.2.0 installed application server. 3rd party SW is installed ok (intended versions). Web server is Apache Tomcat v6.0.13. Eclipse v3.2.2. Oracle Utilities SDK v2.2.0.5 installed.
  
  Database is installed on another computer running Windows XP with the Oracle 11i database, connected on a local area network.
  -------------------------------
  
  Thanks in advance.

  I had these problems too...

  I suppouse you're TAX installind (ETM) then the library you need is lib/spl-tax-2.2.0.jar'

  On the other hand, the eclipse of "lib/ojdbc5-11.1.0.6.0.jar" othe application. I changed it to "lib/ojdbc5-11.1.0.7.0.jar".

  After change of these libs I can run the generator and deploy scripts even when I don't know jet how to develop.

  Dou you have a few cookbooks for development (algorithnms, modify native clases, ect) you want to share?

  Thank you very much.

• Eclipse cannot run the BB project

  Hello all, I am fairly new to BB dev and such a project to receive today (see image below). I imported to Eclipse and tried to run, but Eclipse doesn't like a BB application. I'm using Eclipse 3.5 SDK 5.0. This project could be developed in other versions of Eclipse and SDK, and I guess maybe that's the problem. Has anyone seen such a BB app file structure? What version of the software can I open it with?

  

  Hello

  Follow this step

  1. In Eclipse®, on the file menu, choose new > project.
  2. Expand the BlackBerry folder and select BlackBerry project.
  3. Click Next.
  4. In the project name field, type a name for the project.
  5. Select the new project to create workspace in the option.
  6. To target a specific version of BlackBerry® Device Software, select the use a specific JRE, then click on a version of BlackBerry Device Software.
  7. Click Next.
  8. Click on finish

• Strengthening of the error with Eclipse project

  I'm running into a strange error build a project with Eclipse.

  I have Eclipse version 3.6.2 with BlackBerry Java plug-in 1.3.0.201102031007 - 19 and two SDKs (6.0.0 and 5.0.0.36).

  I am trying to build a library of references this project application project.  Here's the error I'm getting to the stage of packaging:

  Packaging project myApplication_BB
  C:\Apps\Eclipse\plugins\net.rim.ejde.componentpack6.0.0_6.0.0.30\components\bin\rapc.exe -convertpng -quiet codename=deliverables\Standard\6.0.0\myApplication_BB deliverables\Standard\6.0.0\myApplication_BB.rapc -sourceroot=C:\Users\GA\workspace\myApplication_BB\src;C:\Users\GA\workspace\pointTrace\src;C:\Users\GA\workspace\myApplication_BB\res -import=C:\Apps\Eclipse\plugins\net.rim.ejde.componentpack6.0.0_6.0.0.30\components\lib\net_rim_api.jar;C:\Users\GA\workspace\Codename1_BB\deliverables\Standard\5.0.0\Codename1_BB.jar;C:\Apps\Eclipse\plugins\net.rim.ejde.componentpack5.0.0_5.0.0.36\components\lib\net_rim_api.jar C:\Users\GA\workspace\myApplication_BB\bin
  C:\Apps\Eclipse\plugins\net.rim.ejde.componentpack5.0.0_5.0.0.36\components\lib\net_rim_api.jar(net_rim_amms.cod): Error!: Duplicate definition for 'net.rim.device.internal.amms.AMMSMain' found in: C:\Apps\Eclipse\plugins\net.rim.ejde.componentpack6.0.0_6.0.0.30\components\lib\net_rim_api.jar(net_rim_amms.cod)
  Packaging project myApplication_BB failed (took 7.369 seconds)
  

  When I searched the Web for this error I found this link: http://docs.blackberry.com/en/developers/deliverables/23650/eJDE_1.3_SDK_7.0_Known_Issues_1526151_11...

  However, he talks about debugging, and I get not even package the project.

  It seems that he tries to import into a Pack 6.0 and 5.0.  I specified my TERM as 5.0 when creating projects.  Is there a way to force it to use only 5.0?  I could not find anywhere in the project properties.

  Thank you for any information.

  Hello

  check if only they designate same JRE, if the library project and the client of the project when they use different library, you are bound to this kind of questions, change them to the same operating system and check

  Concerning

  Rakesh Shankar.P

• Why my eclipse cannot print console imformation in the BB project?

  Why my eclipse cannot work?  as 'System.out.println ("error");' cannot print anthing?

  Please tell me the reason .thanks

  the eclipse debugger is not connected to the default Simulator. You must use remote debugging. See the guide to the developer for more information.

• BlackBerry missing in Eclipse project type

  I ran the installation to get the site components for Blackberry dev. I had some options display for Blackberry, but now they are gone. The only thing I know that I did was to install the SVN client and simulators. If I look at the installed components it shows Blackberry being installed. I tried uninstalling and reinstalling, but it doesn't work. I'm obviously not an expert with Eclipse (really hate him and chose Netbeans for other Java worked in the past), but seems there must be something stupid miss me to do the things to see the upward. I tried to have a new clean folder for Eclipse and try it all again, but seems it must be some sort of registry entries or some common place looking for files as it says components Blackberry are already installed.

  Any advice would be appreciated.

  This is what I've done and things work. I removed the extract Eclipse, I had. I downloaded the complete installation of the RIM and had him install Eclipse as well. At least now I see the project types. When I shoot a project on google code I'm working, then I get another error, now to try to ensure that updates are done (list has nothing so I'll use the VM version to rebuild the list). Did I mention I didn't like Eclipse, the IDE should not be this difficult to work with, but what do you expect for free .

• Impossible to import the same project name as a previously deleted

  I had a project in Flash Builder, I needed to update; the old version was a Flash Professional project using a FLA, but the new version uses a different folder structure and XFL. I have a click with the right button on the old project in Flash Builder and choose 'Remove', then choose the option "do not remove content". Then, I renamed the project folder and put the new version of the project with the same name of file, in the same place.

  Flash Builder doesn't let me import the new version of the project. It will take me through the Import Wizard, but when he finished nothing appears in Flash Builder. Almost seems as if there is a flag 'permanently ignore this name forever projects' hidden somewhere, although I hope that FB was not inflexible. Anyone know how to fix this? Thank you.

  Eclipse has serious problems with distinguish uppercase / lowercase in project names and will be silently fails if the name of a project changes in the case. Apparently even if you delete the project, then rebuild. So I had to change the capitalization to match the previous version.

• Simulator of don't support Eclipse project

  A small HelloWorld application load in the simulator of Eclipse without problem.  If I add a lot of code not used for the same project HelloWorld, then the Simulator always starts, but the app is no longer available in the Simulator.

  I have an app LWUIT BB I want to convert a BB natively.  That's what I really want to be able to debug.  The case of HelloWorld seems to be a hint about the issue.  When I deploy the application that it deploys in multiple COD files if that's relevant.

  I'm using Eclipse 3.5 and the last BB plugin (1.1.2.20100041610203 - 16 Eclipse on)

  Three different issues have conspired to cause me pain.

  1) there are two consoles at the launch of a debugging session.  Simulator and output packaging.  Out of the box gets moved by the Simulator output once the Simulator starts.  For me, out of the box (hidden until you choose) showed that the jar program is not found.  With this information, I searched and found that I needed to add the JDK bin directory to my system wide path environment variable.

  (2) I started with an existing project that I checked on a SVN repository.  Apparently, this is a no go.  After that I started a new workspace and created a new project of BB and then manually copied into my source, I was able to debug.   With the help of a pre 1.1 plugin project will compile and would launch the Simulator, but the ongoing project of debugging are not available in the Simulator.

  (3) I had to choose the code to delete warnings signature in the preferences of BB.  It is actually an optional step, but without it the clean process will sit analysis sources for a long time (5 to 20 minutes).  With these warnings off, it behaves as expected.

• When I right click on the android project and click 'Signin for BlackBery world' it shows the following error: the specified CSK password is not valid.

  Please see the full error below

  [2013-10-08 12:17:53] Start the Mediaplayer project checklist...
  [2013-10-08 12:17:53] Skip Mediaplayer to check, because the apk file has not changed.
  [2013-10-08 12:30:22] Start the packaging Mediaplayer project...
  [2013-10-08 12:30:24] Start the Mediaplayer project checklist...
  [2013-10-08 12:30:29 - Mediaplayer] Finished verification warnings or errors, check for problems of view for more details.
  [2013-10-08 12:30:31] Start the Mediaplayer project checklist...
  [2013-10-08 12:30:31] Skip Mediaplayer to check, because the apk file has not changed.
  [2013-10-08 12:30:54] The RDK signature completion status: (C:\Users\Shravan\workspaceAndroid\Mediaplayer\dist\Android 4.3\Mediaplayer.bar) error: the CSK password specified is not valid.
  [2013-10-08 12:32:04] Start the packaging Mediaplayer project...
  [2013-10-08 12:32:04] Start the Mediaplayer project checklist...
  [2013-10-08 12:32:05 - Mediaplayer] Finished verification warnings or errors, check for problems of view for more details.
  [2013-10-08 12:32:07] The RDK signature completion status: (C:\Users\Shravan\workspaceAndroid\Mediaplayer\dist\Android 4.3\Mediaplayer.bar) error: the CSK password specified is not valid.

   

   

  Please help me
  

   

  Hello

  You link your old keys with your BlackBerry ID?

  You have the right code signing credentials in c:\Users\[USERNAME]\AppData\Local\Research in Motion\? (author.p12, barsigner.csk, barsigner.db)

  As an alternative, you can export the apk of eclipse and then try the packer online.

• Multiple application to the same project

  Hi all

  I wish I had 1 application runs as a service to start and another is a UIApplication to set the variable to the first application. How can I do this in the same project?

  I try to separate two project but when running, I got the below error

  Class 'com.mytest.phone.UserInfo' multiply defined.

  The linker error: "VerifyError" for MyTestSetting_BB

  Error starting MyTestSetting_BB: 'com.mytest.phone.UserInfo' multiply defined class.

  Two projects use UserInfo for storing data persistenly.

  Thanks in advance,

  POJ

  I'll just try to rephrase what Simon and Bika have already said, but otherwise it's maybe a little clearer.

  The BlackBerry smartphone does not load two classes that have the same name.  Of the same name, in other words the package and class name.  If you have a PersistentData class in the com.myorg.testapp1 package, as well as in the com.myorg.testapp2 package, then here is therefore not the same thing, even if the class name is the same.

  However for process objects in PersistentStore, the same class should be used.  So even though the two classes PersistentData in testapp1 and testapp2 were the same, the BlackBerry only would leave one of them extract the data.

  So to store data in PersistentStore which is used by the applications of two (or more), you should use a common (shared) class.  An easy option is to use standard RIM provided classes such as vector and String.  But that can make life a bit difficult.

  The simplest option is to share classes between applications.  This can be done easily in the JDE.

  Step 1: You create a project that is testapp1 and another is testapp2.

  Step 2: Then you create a third project of the library, which provides the object that will be stored in PersistentStore (and of course, this might have any other components shared as well).  Let's say this project is in the com.myorg.shared package.  Then com.myorg.shared we PersistentData class, she object that is persistent.

  Step 3: You are doing the project two testapp dependent on the com.myorg.shared library project, just the dependencies of the project

  Step 4: You import com.myorg.shared. * classes in testapp classes that use data from PersistentStore.

  I presume that you can do this kind of thing in Eclipse, but I don't him did not.

  Once you understand this, then you can create library files that are in independent work spaces, so that you can maintain testapp1, testapp2 and share completely separated.  But is not too far for this explanation.

  But in short, you do not add the same class for two projects, you make sure that the projects share the same class.  To achieve this, have three projects, two applications and a library.

  Hope it makes sense.

• swap in the stackorder project characters

  What method do I need (is it possible anyway) to change the order of the stack of my actors in the project timeline?

  I introduced just a background, but I can't seem to drag the character in front of him. Is there some shortcuts or what to do?

  When I rebuild the project a lot of behavior settings (like hold it in place) are lost.

  Yes, it is possible to move the character upwards or downwards.

  Select the character in the script, and then go to Timeline/organize and you will see two options (to move upward or downwards), as well as the associated keyboard shortcuts.

• Impossible to update the display in the viewController project

  Hello
  
  I use Jdev studio edition 11.1.1.1.0.
  
  I inherited an existing application.
  I need to change the application of the existing view. I made and tested in the model project with the tester to bc4j. Everything works very well.
  
  But,
  When I deploy the project, there should be changes in the pages. All looks like that I have not modified the query from the view.
  
  An idea of the cause of this?
  It seems that security prevents the changes.
  
  Thanks for any help

  most of the time these are the questions which is because we do not update the project dependencies correctly.
  Build--> clean all [this will delete all classes and deployed pots]
  rebuild all the dependent project, and then run the user interface.

  Amit

• I followed these steps several times, but he still has to work to rebuild the index.  Is there something else in the way of this work?

  Have you tried to rebuild the index spotlight several times, but it didn't work. I followed the steps through the system preferences, but there is no result for the rebuilding of the index.  Is there another way to do it, or is there another problem preventing it from working?

  Do you mean the following steps:

  Rebuild the index on your Mac - Apple Support Spotlight