Receive the OXC0000022 error when you try to run the system restore

Similar Questions

• I get the message "unspecified error" when you try to create a system restore point

  That this is an autofocus of startoff a I have create, fSystem restoration returns with 'unspecified error', he never worked on my laptop.

  Can anyone help? Thks

  Hi somnop,

  1. What antivirus do you use?

  2. do you get any specific error code?

  Follow the steps below and check, if it helps.

  Step 1:

  Disable all security software and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Do SFC scan and check if the problem is related to corruption in the file system.

  Step 3:

  I know that you cannot create a restore but point as a test, try to do System Restore in safe mode and check if you are able to restore.

  Note: Restart the computer in normal mode after the test.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• When you try to run a system recovery I get this error: cannot start Windows. A recent hardware or software change might be the cause. OxcOOOOOOf

  When you try to run a system recovery I get this error; OxcOOOOOOf

  Original title: error OxcOOOOOOf

  My laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.

  File: \Windows\system32\winload.exe

  Status: OxcOOOOOOf

  Info: Seelected entry could not be loaded because the application is missing or damaged.

  It does not work. Suggestions and no, I have not modified before the crash.

  I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?

  Hi Anthony206,

  Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).

  From now on, you can only contact OEM for the use of the recovery feature.

  I hope this helps.

• Error when you try to run an application that worked when built with 8.6

  I have a simple program that I wrote in the 8.6 version that I've never had a problem generation and execution of applications built with it to 8.6.  Two weeks ago, I got 2009 by mail because we had very recently purchased 8.6 and I get errors when you try to run an application built with the same code using 2009.  The error relates to the Mean.vi.  He claims that he can't find it.  The error I get is as follows:

  Error loading VI 'NI_AALBase.lvlib:Mean.vi '.  LabVIEW support 3 error code: could not load façade.  I don't have access to the front panel of this vi, so I wonder if there is a problem with the runtime and not my code.  Please answer as soon as possible because it will quickly start to the impact of my calendar.  Thank you.

  Hello!

  The same problem ?

  I talked with my local OR technical support team. The application now works without any problem.

  Rule of thumb: when creating a Setup program do not forget that the option "Run Time Engine xxxx" in the category "Other installers" is selected despite the fact that the runtime is already installed.

  Best regards.

• Error when you try to run the game in the call of duty Black Ops II of BEX

  Hi all

  I get this error when I try to run the request of COD Black Ops single player II file.

  Signature of the problem:
  Problem event name: BEX
  Application name: t6sp.exe
  Application version: 1.0.0.1
  Application timestamp: 509a 7621
  Fault Module name: StackHash_4bc9
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 0012fd4c
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 16393
  Additional information 1: 4bc9
  More information 2: 4bc95bc08c80253552a5c9f5e69006f7
  Information additional 3:7736
  Additional information 4: 77363e9c4fcc0db54525b3b0c99efd5e

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Please notify.

  Thank you

  Pravin

  Hi Pravin

  It is a Buffer Exreception overflow error that takes place within the program, caused by the t6sp.exe file.

  A buffer overflow occurs when data written to a buffer programmatically also corrupts data values in memory addresses adjacent to the destination due to the insufficient limits check buffer. This can happen when you copy data from a buffer to the other without checking first that the data fits into the destination buffer.

  I recommend that you contact the developer for assistance or to check known issues or updates of performance for this game.

  Support from Activision:
  http://support.Activision.com/Contact_us

  Concerning

• Error when you try to run Quicken 2011: this program is not supported under XP

  Win XP pro - Quicken 2011

  I am running win XP pro. When you try to run Quicken 2011 I get an error message: this program is not supported under XP.  What I do toget Quicken supported?

  For help on Quicken, I recommend posting your question in the community live Quicken .  The people there can help you better as we can in this forum of Windows. Boulder computer Maven
  Most Microsoft Valuable Professional

• Get the "Local WMI connection failed" error when you try to run bbntcfg

  Wondering if anyone is aware of this error and what might be required to occur. The whole service of 4.40 BBPE is dying and when I try to run bbntcfg I get this error. I use this on a Windows 2000 Server (yuck, I know).

  The service fails with the following error;

  The Big Brother Professional Edition Client 4.40 ended in unexpected ways. He did this 3 times. The following corrective action will be taken in 0 milliseconds: no action.

  And I believe that these previous posts may be related as well (occur in the same minute);

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

  Please try first:

  from a command window, run:

  net stop winmgmt

  CD %windir%\system32\wbem

  referential repository.old Ren

  net start winmgmt

  If the problem is not resolved, continues:

  winmgmt /clearadap
  ammo winmgmt
  WinMgmt /unregserver
  WinMgmt/regserver
  WinMgmt /resyncperf

  If the problem is still not resolved, continues again:

  CD %windir%\system32\wbem
  Mofcomp.exe cimwin32.mof
  Regsvr32 /s wbemupgd.dll
  Regsvr32 /s wbemsvc.dll
  Wmiprvse/regserver

  Hope this works now :)

• Get an ERROR OUT OF RANGE TABLE error when you try to run Tomb Raider: anniversary

  OP: ERROR: out of memory 2113236988 asking bytes (266701744 total free) _

  When I try to run the game (Tomb Raider: anniversary) I get this error message:
  'ERROR OUT OF BOUNDS OF THE ARRAY ".

  then at the bottom right of the window, there is a button saying "OUT OF ERROR RANGE of TABLE". clicking on it extends the window down, and he said:

  ERROR: Memory insufficient asking 2113236988 bytes (266701744 total free)

  Windows 7 64 bit

  Core i7 920

  6 GB of RAM

  ATI 4890 1 GB

  Hello Ferrari599,

  I see that there are compatibility issues known Tomb Raider: anniversary with Windows 7. I suggest that you try the methods below to resolve this issue.

  Method 1:

  Try to run the game in Windows Vista or Windows XP compatibility mode. You can check the link that will give you information on how to run the game in compatibility below mode: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  Method 2:

  Also try to update the drivers for your graphics card. You can check the below article which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Also ask your question to Edios forum to see if someone has had the same problem and found a solution:

  http://forums.eidosgames.com/forumdisplay.php?f=208

  Also try to change the resolution of your computer screen. You can check the link that will give you information about this below:

  http://support.eidosinteractive.com/index.php?_m=Knowledgebase&_A=viewarticle&KBArticleID=591&NAV=0, 981,1012,1013

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to run Windows backup under Vista

  I keep getting error messages when I try to run the Windows backup to an external drive. Aired these backups every month for a while with no problems, but now he keeps by default. An old laptop, so I am running vista.

  First of all, I got this message "error 0x8007045D: the request could not be performed because of an i/o device error." After looking on the suggestion of a forum has been a problem with the external hard drive, so I ran check disk but who gave the fire. At the same time, I tried to open a file on a separate external drive to get a similar error message - seems a little by chance...

  Because the disk check gave the fire I tried to climb back again, to get the message ' the shadow copy creation timed out. " Repeat (0 x 81000101).

  Hoping that someone would have an idea of how to fix this?

  Thank you!

  Try this link suggestions

• Jdev 11 g, error when you try to run the session bean

  Hello
  
  I created a session façade for my entity beans. I don't know what happened but when I try to launch it I get the error below. I restarted my computer.
  
  Someone has an idea?
  Thank you.
  
  
  Redeploy the Application...
  < 7 May 2009 22:27:22 CEST > < WARNING > < hats > < BEA-149124 > < failures have been detected all introducing deploy task for application 'wd_tickets '. Error is: "[Deployer: 149164] modification of domain lock belongs to another session in exclusive mode - where the deployment operation cannot continue." >
  weblogic.management.ManagementException: [Deployer: 149164] modification of domain lock belongs to another session in exclusive mode - where the deployment operation cannot take place.
  # Incomplete deployment. # May 7, 2009 16:27:23
  oracle.jdeveloper.deploy.DeployException
  at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
  at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
  at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
  at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
  at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
  at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
  at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
  at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
  at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
  at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
  at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
  at oracle.jdevimpl.runner.adrs.AdrsStarter$ $5 1.run(AdrsStarter.java:1365)
  Caused by: oracle.jdeveloper.deploy.DeployException
  at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:561)
  at oracle.jdevimpl.deploy.weblogic.common.Jsr88WeblogicDeploymentHelper.redeployApplications(Jsr88WeblogicDeploymentHelper.java:259)
  at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:222)
  ... 11 more
  Caused by: oracle.jdeveloper.deploy.DeployException: deployment failed
  at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.redeployApplications(Jsr88DeploymentHelper.java:542)
  ... 13 more
  # Failed executing wd_tickets request because of the deployment error to DefaultServer.
  
  Published by: amcgator on May 7, 2009 13:38

  Once you start your weblogic Server

  Enter the URL: http://127.0.0.1:7101 / console

  username: weblogic
  password: weblogic

  hope this helps,

  Thank you

• Firefox 5 works but after 6 installation I get this error when you try to run it: check the details below...

  Firefox 5 works fine, but as soon as I install 6 and try to run it, it gives me this error msg:

  "XML Parsing Error: undefined entity location: chrome://browser/content/browser.xul line number 233, column 5: key-^ =" "< =" "id ="key_scratchpad"keycode =" & amp; scratchpad.keycode; ' modifiers = "Shift" p = "" > < / key > ""

  He also said during installation that it can not find updates for Java and Skype extensions.

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  Remove extensions that do not have a button in the extension manager are installed by other programs and should be disabled or updated via this software.

  You can uninstall and remove extensions of the Java Console, you do not need to run Java applets.

  See:

  • http://KB.mozillazine.org/Java#Multiple_Java_Console_extensions

• When you try to perform a system restore, I get an error saying: "an unspecified error occurred during system restore." (0 x 80070002)

  original title: System Restore problems

  Hi, I have problems, perform a system restore using windows 7. I get the message: "an unknown error occurred during system restore. (0 x 80070002). any help with this problem would be appreciated. Thank you very much.

  Hello

  This applies to vista, but use it for windows 7

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and issues of windows 7

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Out of memory error when you try to run half-life on Windows Vista

  Half-life loaded when I try to play said memory requires 16 MB amd - 2.xxxxx is available. What should I do to start this game under Windows Vista?

  Hello

  • The amount of RAM you have on your machine?

  If it's less that form the memory required, you need to add:

  http://www.Microsoft.com/athome/Setup/addmemory.aspx

  Also, I suggest you try to communicate with the support of Half Life.

• Error when you try to run vmplayer 7.1.2 on CentOS 7-"could not open/dev/vmmon: no such file or directory."

  I am looking for working on CentOS 7 vmplayer.  I ran the .bundle as root and then when I try to create a VM it fails on with the error "cannot open/dev/vmmon: no such file or directory."

  CentOS 7 is not supported?

  In my research, I did not see any fix.  I think he just doesn't...

  vmplayer 7.1.2 works for me on CentOS 7.

  The problem was the secure boot must be disabled in the BIOS.