ProBook 4330 s: F11 doesn't work is not to recover the BONES of the recovery Partition

Similar Questions

• F11 HP recovery does not start in the recovery partition

  Hello!

  I am an owner of a HP Mini 5101. It has a function to press F11 to restore the system to the State "out-of-the-box". But my problem starts here. When I press F11 I immediately get a screen that says boot Windows on top manager and and error: 0xc000000e and required device is inaccessible.

  This started after I made an installation "clean" with the Windows 7 DVD that came with the computer I have tried to avoid all the "crapware" that comes with the new book.

  If I boot into Windows, the HP_RECOVERY partition is visible and the image of HP recovery is about it.

  Is there anyway to get the recovery of F11 back to operational status? I have a few BCD edition knowledge that help to my problem...

  Thank you very much!

  U

  I thank very you much for getting back to me so quickly.
  
  I must apologize because I did not explain my problem in the right way. Technically, I am able to the boot partition, but the problem occurs when the partition must start in WinRE or WinPE, I guess that for the recovery to start. The loading process is immediately blocked same front initially than anything "things related Windows" starts loading. So about five seconds after I turn on the computer and boot into the recovery partition, or by pressing F11 error that I have described will appear.

  Update:

  I managed to solve my problem. After setting the active recovery partition and boot from the USB installation with windows 7, I managed to fix the mbr which has been altered and the score did not know what to start. So after fixing it, I had no problem to start the recovery.

  Thank you!

• Lenovo Care button + F11 doesn't work do not

  Hello.

  I have a 3000 N200 that I just replaced the HARD drive on.  I've used Norton Ghost to clone the old drive to the new, and there are a few problems to get XP to start later.  I found a few tips elsewhere that said I have to operate the system upward with an XP installation disc and Run fixmbr in the recovery console, which did not work because the XP installation couldn't find any HARD drive - although it is properly parsed by the BIOS.  Then I tried to boot from a W98 boot disk and running fdisk/mbr. He finds the HARD drive, but still no joy.  Then I used W98 fdisk to look at the drive and discovered that the service partition showed that the partition is active then I used fdisk to set the XP partition active.  Who has worked; I can boot XP now without problem.  However, if I press the Lenovo Care button, I get the option but screen by selecting F11 does not the system go into recovery mode.  After a few seconds it starts right in XP.  I was wondering if the W98 fdisk/mbr crushed something specific Lenovo in the mbr, which is the cause to happen and if there is a way to get the service back 'just in case '.

  TIA

  There are two options on the diskette; one, I think, he said "try this first" and the other will recognize the mbr as non-Lenovo mbr. Have you tried the first option first, then the second option?

  Otherwise, I don't know, maybe it's that the ghosts didn't give something correctly? Did you use the switch of the ib in Ghost?

  If you search the forum for "ib switch" (with ""), you should find plenty of information relevant If it's a review.

  Edit; involuntary smiley corrected

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Tools doesn't work does not correctly to the second screen!

  I have several screens on mac mg. When I move the additional screen illustrator, some tools, like the pen tool, no longer work correctly. sjmilar setting in the case changed. but when I move the program back to the main screen of what the pen tool works perfectly. y at - there anyth I ng you can do. It worked fine before, but I'm not sure if there is a setting that has been changed without knowing. CS6

  System Preferences > displays and drag the menu white on the screen that you want to be the main screen.

• "Home" button doesn't work is not even with the support contact

  H

  Hello to you all.

  I seem to have a problem with my iPhone 5 now. Notifications are not appearing (stills phone vibrate, silent or not), siro does not work (but again, vibration works as if everything was fine.) and by simple click home button does not work, both manually and with a help key. Double-click on works fine, triple clicking too. I tried calibration "home" button but it does not work, and since he made double and triple click, I don't think it's broken. The thing is, even touch home on assistove does nothing. Please help me find a solution thanks!

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data by doing this, but it can cure a few glitches.

  If restarting the force cannot be done because the home button does not react, set it back to factory settings, explained in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

• Video doesn't work is not right in the edition

  So I've upgraded to windows 10 and then for some strange reason, video clips from my camera will not work.

  The video clips are AVI, recorded on a Kodak Z5010, I also tried my webcam it is a Logitech C920 he puts the MP4 clips.

  It seems to work fine with type WMV clips.

  2 major problems only seem to be that they will not be rendered and have no audio.

  I think it might be a type of codec problem, but I have no idea how to solve this problem

  What do you think would be the problem?

  I use first elements 14 by the way.

  Clear your Cache of media rename the avi file is in.

• Software plugin doesn't work is not because of the order in photoshop cc2015

  I have problems with my plugin software.  I use a number of plugin and I'm having a problem with them.  They told me that all the programs of the six position or below will not be not open.  That's what I live. I use the "Topaz", NIK, McPhun, OnOne, and DFT filters.  I can get some of them to work.  How can this problem be solved?

  Thanks for the help.

  Hello

  Please see the links below:

  https://support.topazlabs.com/HC/en-us/articles/200126936-Photoshop-CC-2015

  You have a problem with 6th place with the CAP in ythe filter in photoshop CC2015?

• Effects of text doesn't work is not due to the length of the slide

  Hello

  I have a 5 legends that have a start on them. (just a zoom faded in)

  I have 5 buttons each with the relevant text caption.  I wish that the slide to pause while the user presses each button in turn to reveal the text captions.  However, only the first work because the blade stops.

  I can however have no effect of entry and just have text captions appear on click of a button, but I liked the effect of opening 'animation' and you want only it on each of them.

  This will have to be created in Flash and imported or can I replicate in Captivate 6?

  See you soon

  Julie

  I see the problem... I think that only apply you a time based on the text captions, would see the chronology.

  But you must apply the effect by a tip action, which is a bit tricky. Take a look at this blog post, first example (those are not faded zoom effects, but the principle is the same):

  http://blog.lilybiri.com/reset-effects

  Is this something like that?

• Record paging doesn't work is not according to the needs

  Hello
  
  Really hope someone can help with this.
  
  Here goes...
  
  I have a text on a single page field when a Word is entered, it is passed to searchresults.php, this is also my master page for my master/detail server behavior.
  
  for example a user performs a search on say "China", they are passed to searchresults.php that displays the 10 first results for China. That was done with the following SQL
  
  SELECT *.
  Of THE world
  WHERE the world.world_country AS txtsearch %
  
  I put the drive and the application seems to work well, until I click 'next' for the next ten records where it shows just empty. Don't know what happening just seems to lose the query.
  
  If someone could advise me on a fix for this I'd apreciate it.
  
  

  Paging better seems to work when you use a GET action on the form, so that
  the search term is found in the query string, instead of using the POST to
  It is through form variables.

  --
  Paul Whitham
  Certified Professional Dreamweaver MX2004
  Adobe Community Expert - Dreamweaver

  Valleybiz Web design
  www.valleybiz.NET

  "dansta" wrote in message
  News:ecfon9$JMJ$1@forums. Macromedia.com...
  > Hi,.
  >
  > Really hope someone can help with this.
  >
  > Here goes...
  >
  > I have a text field on a single page when a Word is entered, it is passed
  > to
  > searchresults.php, this is also my page master for my master-detail
  > server
  > behavior.
  >
  > for example, a user performs a search on Word to say "China" they switched to searchresults.php
  > who
  > displays the top 10 results for China. That was done with the
  > more SQL
  >
  > SELECT *.
  > WORLDWIDE
  > World.world_country WHERE AS txtsearch %
  >
  > I put the drive and the application seems to work well, until I click
  > "next"
  > for the next ten records where it shows just empty. Don't know what
  > past it seems fair to lose the query.
  >
  > If someone could advise me on a fix for this I'd apreciate it.
  >
  >
  >

• Restore the default settings doesn't work is not because of the sweetpack.

  Somehow, a toolbar called sweetpack was installed on firefox. I tried to remove the addon via the windows uninstaller, but it still appears in the addon of firefox even handler after restarting windows. the addon is blocked on firefox, but there is no way to turn it off. Then, I tried to restore the default settings, but firefox get toward the top of the box to "restore the data from the old" who comes chugged away in an infinite loop.

  I just looked at the picture and note that you have TopArcadeHits which is another embarrassing. Read the threads related to my last post.

  change More info / links

  • "my last post" 964290 # 454218 answer including the related action items
    • a long thread and informative 960863/issues/960863
  • "Waka_Flocka_Flame" 's post on anti malware software /questions/964290 #answer - 453976
    • including the link to ADWCleaner
    • an alternative link http://www.bleepingcomputer.com/download/adwcleaner/

• BlackBerry Smartphones Media Manager doesn't work does not correctly after the installation of update

  I have a 8110 and put to level to the desktop 5.0 version.  Since that time, the Media Manager does not recognize the 8110 put pics on computer.

  What should I do to correct this?

  Thank you.

  There is no need of Media Manager.

  You can transfer files directly:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&message.ID=...

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• spell check doesn't work is not in outlook on windows 7

  Hi the spell checker doesn't work is not in my outlook for windows 7. This can be corrected?

  Sincerely, Robert H.C.

  Outlook.com has a manual spell at the top next to the options button control. It won't appear that if you write an e-mail AND if your browser is not checking spelling himself. In most modern browsers the spell checking is done by the browser itself and may need to be enabled in this browser

  http://email.about.com/od/windowslivehotmailtips/Qt/How_to_Use_the_Windows_Live_Hotmail_Spell_Checker.htm

  You may need to activate in your browser

  Google chrome
  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=95604

  Firefox
  https://support.Mozilla.org/en-us/KB/how-do-i-use-Firefox-spell-checker

  IE , it depends on the version you have.

  http://blogs.msdn.com/b/ie/archive/2011/11/08/typing-with-speed-and-accuracy-in-IE10.aspx

  For additional amount IE 10 tips https://ie.microsoft.com/testdrive/Browser/SpellChecking/Default.htmll