Received and recovery question

Similar Questions

• IBM ThinkPad T43: Rescue and Recovery question

  Hello

  I have an IBM ThinkPad T43. The Rescue and Recovery program opens whenever I turn on my laptop after a failed attempt to restore my laptop to factory settings. I cannot even connect on Windows, because the Rescue and Recovery program opens upwards immediately after I turned on the power. I tried to restore my system to factory settings using the program and the product recovery disc I bought at Lenovo, in the hope of resolving the issue, but every time I'm prompt "IBM could not restore your system.

  How can I stop Rescue and Recovery of the opening and resume with normal startup in Windows? What should I do so that I am able to restore my laptop to factory settings?

  Please help if you have any suggestions. I appreciate it greatly! Thank you!

  You can use this TI pc doc disk bootable http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-56222 its been a long time since I used it, but I think that in the top right there is a tab that says utilities or something like that you can wipe the HARD drive from there as I've always used the quick option worked for me

• Rescue and recovery question

  Can I do the following with the installation of a new hard drive in my x 200 under xp pro update with all SPs and patches victory. ?

  1 create a Rescue and Recovery Using ThinkVantage disc.

  2. backup the 'information' using windows backup on an external hard disk utillity.

  3. install the new hard drive in my x 200

  4. start x 200 with Rescue and Recovery disc

  5. connect the external hard drive and restore 'Any Information' using the xp utillity

  6 make essentially a version cloned my original hard drive in the hard drive installed one.

  Thanks for any help/suggestions.

  Of course, you can use your method

• Backup and recovery question

  Hi all
  
  
  I have created a script as, when the database is running I moved all the controlfiles to another location. But still the database operates smoothly. Then, I create a table and inserted some values and validation. Now the question is what happens to the status of SNA even when controlfile is not available? What is the importance of the control file? point of control and command of newspaper is happening but where it is updated? Also, when I moved back to the database control files it works very well ireespective all changes not updated in these controlfiles system!
  
  
  Response appreciated, thanks in advance.
  
  
  
  Kind regards
  
  KT

  Hi Oraclekt,

  First of all, even if you have moved the contorlfiles you wouldn't get no matter what mistake coz you have not restarted your database. Its up and running. You would have got the error if the database is restarted. The same thing occurs even if you would have lost all the log files and your database is running. But once when you restart your database then alone, you would get to know the errors.

  Secondly, commenting on the SNA #, the SNA # has nothing to do with the location of the controlfiles. Its stored in the data dictionary views.

  If you restart your database and you will get to know the effect of your controlfiles moving.

• Question of size options and recovery disc creation.

  So, since buying my laptop ive put some games and other various programs on the C partition for a total of 18gigs of value. When I create my recovery disks it don't go to the special recovery partition and use only suggested 3 dvd + r or will also include tips on the c drive and go out in a bigger way?

  And another question when im done make the disc when I use them, they work exactly as how the Recovery Manager works when you pull up in windows from the recovery partition? I want to know this because when I use the Recovery Manager in windows from the partition it gives me a separate option to reinstall the drivers and additional programs (i.e.: suite dvd, youcam, norton) that came with the pc?

  I have never seen a recovery set take 8 DVD, but there is always a first guess. When you start the process of creation of recovery it will tell you how to can the disks are required. If you don't have enough, it will let you cancel until you get more.

  And Yes, I'm a girl.

• Question of rescue and recovery, and Client Security solution

  I have a thinkpad edge e220s for home use and I am trying to understand that these two thinkvantage tools will be of no use to me since I'm not on a corporate network or whatever it is (all marketing materials HE mentions admins etc.).

  Is the rescue and recovery just a backup solution with imaging of disk (as ghost)? I use a drobo for all my data storage, so I am not too concerned about backups as the drobo offers redundancy in the event of disk failure. The laptop has a SSD which doesn't have a lot of capacity if I don't want unnecessary tools that will have a lot of space. However if the rescue and recovery offers really useful features then I might consider its installation (and not using the backup feature). I could not make out what marketing materials meant by the solution of a single button for viruses and crashes.

  Second, the client security solution features other than Vault/Manager password on my model? I'm already using the beta version of the new (4) version of password manager which is autonomous and requires no client security solution. Again once the marketing material does not help a user at home like me understand very well.

  Any help will be appreciated!

  Based on your description I don't think rescue & recovery or Client Security Solution any value for you.

• Some of the e-mails, I received and saved in Outlook Express 6.0, disappeared. How can I get it back, and what caused it?

  There are records at random in my Outllook Express that the mail that I rescued disappeared. There was no breakdown nor any other icident happened. Outlook Express request the compress for additional space, several times a day. Can you tell me how to recover these missing many emails?

  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.

  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  About file Corruption:
  http://www.Microsoft.com/Windows/IE/community/columns/filecorruption.mspx

  Recovery methods:

  If you use XP/SP2 or SP3, and are fully patched, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.

  To restore a folder bak on the message store folder, first find the location of the message store.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.

  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.

  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.

  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.

  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:

  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx

  And see:
  http://www.oehelp.com/OETips.aspx#4

  A general warning to help avoid this in the future:

  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Rescue and recovery under 64 bit creates a 32-bit Windows 7, why?

  Hello. I have an x 201 with W7 Pro (64-bit) OEM Lenovo. I replaced the hard so I use Rescue and Recovery to have a clean install of W7 and the X 201 good pilots.

  What I did to run enhanced backup and restore and then via Advanced Rescue and Recovery, I launched the option "create rescue media. I followed the instructions and created a rescue media USB that as far as I understand leaves my X 201 as it was when it left the factory.

  I booted from the USB without problems, restore the system and to my surprise it installed Windows 7 but 32-bit 64-bit not. And no drivers (no video, no network, no USB/PCI). I'm lost here. Why is installed 32-bit when all items generated under Windows 7 Pro (64 bit) and what about drivers? Why it has not installed drivers?

  Looking at Enchaced backup and restore in my original installation icon, he says "Lenovo Enchanced backup and restore (32-bit)", so I don't know if that creates only the 32 bit instead of 64-bit OS.

  I'll now factory recovery disc option allows to see if that solved the problem.

  At this point, I thought that icon factory recovery disc was the same as the use of "create rescue media", because the two pretend to leave the hard drive in the same way, it was when the laptop has left the factory.

  If someone could clarify the difference between the two: 'factory recovery disk'vs'create rescue media', and also why the last of them creates a 32-bit OS rather than the 64-bit what it was supposed to create

  I will report how it goes with the task of recovery factory disc that I use now.

  Hello

  Quite interresting situaiton and to be honest not usual.

  However, what should happen, once you have created a rescue media, it's that you should have on the end, a single bootable media, using which you can save, etc.

  However, this support of rescue should not contain any OS, it should be only a boneless bootable media. The operating system and the rest should be on a separate stand.

  In the case where you had the original x 64 Bit OS, then using the recovery CD (as you confirmed as) should have restored the system to the State, as you received it.

  I don't understand, why it needs to change the version of the OS to another, when you initially x64Bit.
  Maybe some background info would be useful.

  See you soon

• Rescue and recovery lists no backup on USB Iomega eGO drive

  Hello

  I have been using an Iomega eGO external backups USB drive.

  I was able to identify and remove (if necessary) backups in Windows 7 and rescue & recovery running, but I can't get the list of backups at the start of a recovery in rescue & recovery DVD.

  Basically I replaces unencrypted with a SSD hard drive that supports encryption.

  The goal was to use a full backup immediately before removing the HARD drive to restore the complete system.

  At the start of the recovery DVDs, recovery utility & rescue lists not all backups, even when the check box for the list of backups on other systems is checked.

  It makes no difference if the selection of THE places or USB external drive.

  Any ideas?

  Backups are not much good if you can't get back them.

  If my old drive did not then I would be in a worse state than this. I can't say I'm impressed.

  Well, I've finally sorted this issue.

  I tried to create a new recovery disk.

  I even tried the recovery time in Windows and see what backups it detected. Yet once, I drew a blank.

  The question was this:

  On my W510 at least, none of the USB3.0 ports are recognized by Lenovo rescue and recovery software when you select the USB storage device. Once connected to a single USB 2.0 port the USB eGo has been recognized and listed backups.

  Unfortunately, this means a minimum of 6 hours to restore from a full backup!

• Kindly unblock my account that I don't remember my email and Security Question.

  Kindly unblock my account that I don't remember my email and Security Question.

  I received important emails in the account. He has been blocked it for a month now.

  Kindly unblock as soon as POSSIBLE.

  I'll be very grateful.

  Thank you.

  Hello

  If you are referring to a Hotmail account, read this

  I'm sorry, but we cannot help with hotmail problems in Microsoft answers Feedback Forum you send to

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• repair and recovery poster error 0 * 570

  Hello Mr President! Jemy my name is. I have a problem in terms of repair and recovery Windows Vistar. When I repair and recovery there. It still shows the error 0 * 570 problem

  and the system cannot adapt the automated problem.

  Hello

  If the question is 570 error Code then I suggest you check the link.
  If the question is not that, then provides us with some additional information
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-code-570-user-ID-failed/29909712-ef49-46FE-950D-880c26c7f168

• Lenovo 3000 N200 - cannot access Rescue and Recovery - MBR poss problem?

  I have a Lenovo 3000 N200 sick who was running XP home. I could not start XP and can only access the Rescue and Recovery utility in the Lenovo recovery Partition that would be to rebuild the hard drive to factory settings IE. Windows XP with no data. I managed to copy the data using a Paragon backup cd and then made the fatal mistake of attempting a repair MBR, which was a very tempting option on the Paragon rescue cd. Now, not only it does not boot to XP, but I can run is even more Rescue and Recovery to reinstall XP which is the problem!

  If I boot with windows install disc and take the option recovery console it stops, statement that "recovery console could not find the hard drives connected to your computer. Setup cannot continue. "

  I was wondering if someone another backup MBR restore could help me with this?

  So, if someone has a Lenovo 3000 N200 work and is willing to try to save the MBR to send it to me, then please get in touch. It is probably useful to make a backup for yourself where the same problems happen to you!  In my view, there are a bunch of programs that backup the MBR for example MBRtool, MBRWizard and so on.

  Any ideas, offer accepted with gratitude.

  Yes I know I could buy the Lenovo recovery disk, but it is a matter of principle for me avoid paying £50 or so if I can avoid it! We'll see if we can help here...

  Thank you

  Simonides

  I am pleased Andyp!

  The solution was to set the primary partition to inactive and value the recovery partition Active, then restart and use the Lenovo Care button (now finally works) to access the function of recovery so I could return the laptop to factory State.

  No doubt there are plenty of ways to do it, but the approach I took to solve this problem is released under

  1. use another PC to download Paragon backup and restore (I actually used the trial edition now but the free edition may have a similar feature)

  2nd burn a CD bootable backup and recovery 10.0.

  3. start the CD Lenovo, and after a long wait, a menu should appear with 11 options, the first of them being Paragon backup and restore.

  4. Select Paragon backup and restore.

  5 select properties in the pick a task window and you will see two partitions, a big enough (in my case Go 143, called Preload) and the other is quite small (6 GB called SERVICEV001).

  Note: this is an opportunity brilliant to use the Back Up Partition option to make a backup on external drive USB of the two partitions as the reconstruction of the hard drive with Lenovo Care button you will lose all data.

  6 right-click the partition preloads and select Edit and set idle

  7. made the SERVICEV001 partition right click and select Edit and set the Active

  8 remove the backup and recovery of CD and put it somewhere safe

  9. restart the PC and Lenovo Care button (might be called something different) should now work, allowing you to restore the hard drive to factory settings which will erase all data of a personal nature. You did a backup?

  10 Windows should then start as usual, reinstall Paragon backup and restore, and restore your data.

  Finally, look at this as a lesson to

  (a) you get a writable DVD and use the Lenovo menu under windows to create a floppy disk from Lenovo rescue and recovery started.

  (b) use Paragon or equivalent to create copies of images of each partition and ordinary differential copies of the primary partition.

  I hope this will help other owners who have a hidden rescue for example partition. IBM and HP and would like to receive feedback.

  Finally, I must acknowledge assistance patient e-mail provided by Taisia Smirnova Paragon support by offering me this solution.

  best, Simonides

  (If you found this helpful please click on the star to give me a point Bravo!)

• Dell backup and recovery file storage location

  I am trying to locate where a backup of files of initial data with the help of Dell Backup and Recovery on my new Windows 7 laptop (Jan 2015), stored backup files.  I failed to provide parameters to use an external hard drive for backup.  I want to clean up backup files it does I can start using an external hard drive as storage location.  I looked everywhere, both on my laptop and Google search to find the location.  Any help would be greatly appreciated!

  I know that it is a bit a necro but since it is unanswered.

  You can determine where the Dell Backup and Recovery Software stored your files by default when opening the software and start to run another backup. (Note: when you run the software again you may see the option to run another backup from the home screen.) In this case click on the drop-down menu almost invisible in the title bar (blue arrow), then select "Backup" (red arrow) in the menu.)

  

  On the screen "Data Backup", check the "local".

  'Creating data backup' screen will display a box titled "Browse...". "under the title"Where. "

  At the bottom of this box, you should see the path where Dell Backup and Recovery saved your backup.

  For me, the default location is "C:\users\CURRENT_USER\Documents". (CURRENT_USER is your user name).

  If you navigate to this location in Windows Explorer, you should see a folder named "Profile1". Here's my Dell backup files are stored by default.

  If for any reason you do not see a folder named "Profile1" I open the files in the default location and search for files with the .inp file extension. What are your backup files.

  BTW, for anyone reading the FAQ is NOT DELL-Jesse L linked to you to note what the FAQ for Dell backup and recovery that is currently in use. This is the FAQ for their former Dell DataSafe Local Backup 2.0 software which they no longer use. If you read that FAQ you can noticed the question and the answer below:

  How can I move backups of the system to another location for storage?

  Backup system can be moved to another storage location if you wish. Simply open Dell DataSafe and edit the backup for backups of your system profile. When you select the location, select the location where you want that all backups of the system to create. The application will automatically move all backups of your system to this new location.

  I just tested this in the current version of Dell backup and restore (version 1.8.1.70), and he did NOT move my old files from backup to the new location, he created a new copy from the backup, so you should delete old copies manually.

  I hope this helps someone.

• Upgrade to Premium from Dell backup and recovery Message editing

  Laptop continuously receives the message below after upgrade to Windows 10. The user chooses "Remind me" to each connection, however the message still reappears. Other problems such as departure changed to the top and responsiveness of the system are made.

  Is it possible to stop the notification?

  Upgrade of the operating system Windows 10

  We see that you have upgraded to Windows. You can only recover your device to the old version of Windows. If you want to save or retrieve your current version of Windows and all of your data, please upgrade to the Premium Edition of Dell for backup and recovery, create a backup of the system and take advantage of the new features that offers Premium.

  Please choose one of the following options:

  Show me the benefits of the Premium edition
  Don't remind me

  The message stop appearing.

• Rescue and Recovery will restore all of the disk?

  I searched high and low for an answer to this question, but I'm not. I have use Rescue and Recovery to back up the drive of my laptop. If I have a problem of catastrophic disk, save and recovery will restore my entire drive to a new drive, including the service partition? I have a fully functional and updated disc to date after a full restore? (Guess that I restore using a floppy disk to boot Rescue and Recovery, which have I already have.)

  Well, I decided that I have a couple of hours on my hands and a fresh backup using rescue and recovery (in order to test whether or not he backs up the recovery partition) and a Windows Vista "complete PC Backup" (in this case that it fails).

  The result: Yes, when you restore a recent backup, it will also restore the recovery partition.

  I am very happy.