Received message, Windows not genuine and after reinstalling Windows 7 get a blue screen
Hello Sir, my name is Roshan. IAM using a laptop of Dell Inspiron N5050 with I3 processor, 4 GB Ram, 320 HDD. Two days back, I have a problem in my laptop showing that the OS Windows 7 iam using is not AUTHENTIC. So, I tried to install Windows 7 ultimate OS using the CD player. The process is completed and the system is restarted, the operating system is not charging and a blue screen appears on the screen. I tried to diagnosis, the recovery of the system and changing the Options of compatible BIOS AHCI/API. Not these worked. Is there a solution to my problem which can be solved by myself without going through any department store?
Windows 7 Ultimate come preloaded on the computer?
If this is not the case, why did you think that recharge a copy of Windows 7 that did not come with the system would solve the problem?
If possible, try to reload Windows using the recovery partition:
New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
For Dell, press CTRL + F11 directly after switching on the device
If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
Reference Dell
http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen
1-800-624-9896
Tags: Windows
Similar Questions
-
Need help, my computer hangs at this message
Windows 7, get this blue screen error message, what should I do to remedy? C:\Windows\Minidump\100312-29827-01.dmp
Hello
1. when exactly do you get this error message?
2 are you able to start in the Office?
3 have there been recent changes to the computer before the show?
I suggest you try the steps mentioned below and check if it helps.
Method 1: Start your system in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 3: Resolve stop (blue screen) errors in Windows 7: http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7
Hope this information is useful.
-
whenever I try to start my computer .a blue screen come often does not start in any of the modes security .He told me to repair windows recommended. can't do recovery or what he can be.wont start in safety mode.what can I do .thank you. Leonard.
Hi leonardhurley,
Since when are you facing this problem?
You did changes before this problem occurs?
What is the exact blue screen error message you received?
Method 1
I suggest that you perform the last good known Configuration
http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration
Method 2: disable automatic reboot in order to collect the Blue error screen, so in case the blue screen just flashes and dries on.
Method 3:
I suggest you to follow the article below for the Blue error screen.
-
Vista will not start and the Startup Repair boots in a blue screen of death. Why?
I select run a startup repair, and it goes straight to the blue screen. When I start normally it justs sits there with the bar go green around and around. System Restore also dosen't help. I can boot into safe mode, but I don't know of other programs of Diagnostics. In addition, no virus. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!
Read the posts by spirit MVP in the following thread on the Blue Screen of Death. They should help you solve your problem. http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/8cd8362e-7d06-46fb-afd7-84d54b6a8ea7.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
This computer is used by my son. He said that began after you sent an upgrade.
amatgo,
Begin by trying things in this thread. Let us know the results. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have windows mail and can receive messages but not send, but I can't send when I go on my statement but not my e-mail account window, won't accept my password... was I get hacked or or why?
It seems to work now, so if my emails get screwed up again, I'll take your advice... don't understand why he sends now and am not asking my password as it does... but I don't want to do something that I don't know if it's working now... What do you think?
-
I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?
Hi KevinRy,
Welcome to the Microsoft Answers site!
Unplug all external devices.
Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.
Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:
1.
Right-click my computerand then click Properties.
2.
Click the Advanced tab.
3.
Under Startup and recovery, click settings to open the Startup and recovery dialog box.
4.
Clear the automatically restart check box, and then click OK many times necessary.
5.
Restart your computer so that the settings take effect.
Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.
Please reply back with the error message you get because it helps us to resolve the error.
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I try to send a new message or reply to a received message, windows live and outlook express just crash. Something has been corrupted. What can I do about it?
Please do not just tell me after that elsewhere...It's my log message:Open Journal: 2011-08 - 16 T 21: 11:32Z*Windows Live Mail 14.0.8117.0416[17:11:55.96] 1384 Mail: ERROR Zone_MailChk: (menuutil.cpp:1456), failed with 0 x 80040100[17:11:59.48] 1384 Mail: ERROR Zone_MailChk: (menuutil.cpp:1456), failed with 0 x 80040100[17:12:26.51] 1384 Mail: ERROR Zone_MailChk: (menuutil.cpp:1456), failed with 0 x 80040100*********************************************************************************** Newspaper open: 2011-08 - 16 T 21: 12:31Z*Windows Live Mail 14.0.8117.0416[17:13:38.56] 1458 email: ERROR Zone_MailChk: (menuutil.cpp:1456), failed with 0 x 80040100[17:13:42.64] 1458 email: ERROR Zone_MailChk: (menuutil.cpp:1456), failed with 0 x 80040100**********************************************************************************Hi Gmilandre,For problems with Live Mail, you can post your query in Live Mail Forums for assistance.Due to Outlook Express, you do changes on your computer before this problem?View the log details associated with Outlook Express as well to help us help you better.For more information, see: -
Windows 7 validation error saying Windows not genuine - and it really was for two years!
I have an error that comes every hour or so, all of a sudden, that says that Windows 7 is not genuine and to 'click here' to resolve. It looks quite realistic, however, the issue I have with it is that half of the message is in a weird language that I don't understand. Part is in English, is in something that looks like Russian. I do not DARE click the link because I am afraid that this is malware or a virus because of the foreign language and others who look a little off, although I scanned with both programs and come clean, including with Microsoft Essentials and Norton 360.
I just tried to reinstall Windows 7 on my drive to upgrade two years (Vista upgrade), but it doesn't let me, saying that my version is newer than the disk. I'm just not that computer to find out what to do next. All my files are backed up safely with an off-site backup services so I don't lose anything I can do away from my computer, but how? Or better yet, how can I know if it's true?Help!SimonMciThat sounds good to me :)
Have fun.
-
iTunes will not open even after reinstall on windows 7
iTunes will not open even after reinstall on windows 7
Hello mamaKAT,.
Read the Apple article listed here:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
http://support.Apple.com/kb/TS1717If this does not help, you should contact Apple support or post in the Apple discussion forums.
http://discussions.Apple.com/category.jspa?categoryID=149Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Windows not genuine and can not activate
I installed windows again in my laptop using a CD of windows, but my activation key does not work, he keeps announcing that windows is not genuine and I should activate it as soon as POSSIBLE. But still trying to activate it online its not working... when I enter my product key, it gives an error that the key is not allowed by windows, please help me as soon as POSSIBLE.
you have a samsung OEM SLP key on a hp computer. that does not work.
you will have to buy a real Pinnacle or go back to the windows your computer comes with (home premium)OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. -
Outlook Express 6 - can receive messages but not send - error number: 0x800CCC0E
Original title: Outlook Express 6 - can receive messages but not send
I recently installed SP3 on my Windows XP machine and installed Internet Explorer 8. After that, Outlook stopped mail (still receives, if) and gave me this error message:
The connection to the server has failed. Account: 'mail.qmcompany.com', server: 'mail.qmcompany.com', Protocol: SMTP, Port: 587, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E
I tried everything but reinstall Outlook Express. Is there a compatibility issue with IE 8? Any help would be appreciated.
John
Hi John,.
Follow the steps described in the article below
Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express (OE)
http://support.Microsoft.com/kb/813514
(Article applies to Outlook Express 5.5, steps applies to OE 6)
-
reformat and reinstall Windows XP but get the blue screen on the windows configuration page
I'm trying to reformat and reinstall Windows XP on my Dell XPS400, but I get a blue screen on the Windows installation page that says... A problem has been detected and Windows has shut down to prevent damage to your computer. How can I make this? I want to give this computer to my grandchildren.
Hello
1. why you try to reinstall Windows XP?
I suggest you to try the steps below and check if they help to resolve the issue.
Configure your computer to start from the CD-ROM drive. For more information on how to do this, refer to your computer documentation or contact the manufacturer of your computer. Insert your Windows XP installation CD, and then restart your computer.
a. when the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.
b. press ENTER when you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to Setup screen.
c. do not choose the option to press R to use the Recovery Console.
d. in the Windows XP licensing agreement, press F8 to accept the license agreement.
e. make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
f. follow the instructions on the screen to complete the installation.
See the following link for more details on the repair facility:
How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed
Hope this information is useful.
-
When I start my leptop Lenevo my cursor will not move and after clicking on a key sometimes it start to move... and when the window open an item on the top left most corner of the desktop is activated itself and any items on the desktop, I clicked on the selected item open... during this problem touchpad does not work when I press any key some time then he start working side effect... of this problem are
(1) when we assume that slider in the middle of any page because of this problem just started automatically... Suppose that you read the number 10 on any book page and when that happens u don't come on the page no 1 automatically...
what I've done
I did a key recovery... even I am facing problem... Please tell me the steps to fix
Original title: DESKTOP PROBLEM
Hello
Check with Lenovo support, their drivers and documentation online and ask in their forums
on known problems.Support from Lenovo and downloads
http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.doLenovo forums
http://forums.Lenovo.com/Be sure to check that you have the latest driver for touchpad - updated or reinstall at Lenovo.
=============================
More troubleshooting if necessary:
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">->
http://support.Microsoft.com/kb/2681286#method22Performance and Maintenance<- check="" these="" especially="" the="">->
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1Other methods of troubleshooting to use according to your needs:
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at Applications.
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set
SEE drivers to hide Microsoft - update those with Dump in their names. (Also
updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Hello everyone... I can't backup to my iPhone since I upgrade to IOS 9.2! I always received message "storage not enough ' in case I can't make backup"iTunes"because the message asking me for more memory! I have space on my Mac 17 GB!
Storage icloud and Mac local storage are two different things, it does not replace the other.
Maybe you are looking for
-
Sound is coming into the computer through the microphone. There is no connected microphone. There is a grinding and screeching undulating noise from speakers. I am unable to stop this.
-
Strange screen with acer Liquid Z220 shutdown problem
This has happened with my new phone smart acer Liquid Z220. Turning on the acer screen "android-powered" rises. The three logo (my provider). But then the screen turns white. However, the phone doesn't work and responds to the touch (without seeing m
-
When Outlook Express Mail compose the cursor suddenly starts moving across the page.
When I'm composing an e-mail on Outlook Express if I stop for a moment the cursor starts to move across the page. I can stop by clicking 'End', but soon he begins to do it again. My OS is Windows XP and my version of OE 6. IE version is 8.
-
E3000 removes all connections every 2-6 hours
Every few hours the router removes all connections, wireless and wireline, and then they return to the minute. I thought initially the router itself was restart due to overheating, but solve any chance who did not stop the problem. I tried a lot of t
-
BlackBerry smartphone Storm2 9550 news
Just got it yesterday. Lovin ' it already. Some of the things I can't understand, but there is only 24 hours. And I just thought that one of them - Yes! Now I'm 2. 1. What is the 'push' into the wall button do? 2. I want to put all text until the rin