Vista will not start and the Startup Repair boots in a blue screen of death. Why?

Similar Questions

• Vista will not start and the recovery disc does not

  Hey all,.

  Vista has just started to freeze during the boot at crcdisk.sys today

  I tried using the recovery disk, but it won't work, says the root prolem is corrupt system or something like that.

  If you need more information please ask!

  Can someone help me?

  Thanks in advance!

  Hello

  Yes, it would make a difference to what is the Startup Repair tool. Vista startup repair only works on his own Bootstrapper. You replaced one with GRUB, so you should use the ' nix tools to fix it. However, you indicated earlier that the problem occurs after the start load Vista, so this isn't something the Startup Repair tool will correct and is not likely to solve your problem.

  Your running recovery disk will also likely be wipe the GRUB bootloader, but you don't really have a lot of options when it comes to a corrupted installation. If you are unable to correct the problem to running chkdsk, then it is unlikely that any other action will work. You're stuck with the relocation.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Vista won't start and the startup repair can't find any problems

  Have a Dell Inspiron under Vista 64 bit, which does not start. I have inserted the re installation DVD and ran the Startup Repair which could not detect a problem.

  Diagnosis and repair are the following

  ----------------------

  Managed last start: 2010-10-23 21:12:44 (GMT)

  Number of repair attempts: 1

  Details of the session

  -------------------------------

  System disk = \Device\Harddisk0

  Windows directory = C:\Windows

  AutoChk run = 0

  Number of root causes = 1

  Test performed

  ------------------------------

  Name: Search for updates

  Result: Completed successfully. Error code = 0 x 0

  Take time = 0ms

  The test is performed:

  ------------------------------------

  Test the disc name: System

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Name: Troubleshooting disk

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 218ms

  The test is performed:

  ------------------------------------

  Name: Metadata for the drive Test

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 62ms

  The test is performed:

  ------------------------------------

  Names OS test target

  Result:

  Completed successfully. Error code = 0 x 0

  Taking time = 188ms

  The test is performed:

  ------------------------------------

  Name: Checking content Volume

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 140ms

  The test is performed:

  ------------------------------------

  Name: Diagnostic Boot manager

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 78ms

  The test is performed:

  ------------------------------------

  Name: Diagnostic log for the system startup

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 16ms

  The test is performed:

  ------------------------------------

  Name: event log diagnosis

  Result: Completed successfully. Error code = 0 x 0

  Time taken = 530ms

  The test is performed:

  ------------------------------------

  Rated: Internal audit of State

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  The test is performed:

  ------------------------------------

  Name: Start-up condition Test

  Result: Completed successfully. Error code = 0 x 0

  Taking time = 0ms

  Root cause found:

  -----------------------------

  State of the start indicates that the OS booted successfully

  But the laptop still wont start I tried to run chkdsk/r from the command line and was unable to do as he says Windows cannot run disk checking on this volume, because it is write protected. I don't know what to do now anyone no matter what ideas thanks in advance.

  Seems odd. Startup Repair should have solved the problem.

  Have you tried new reboot running?

  Give it a shot...

  Any chance that you have a "backup computer?

  Try to do a full restore of the PC.

  See how it goes...

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• What should I do if my windows does not start, and the Startup Repair is not help at all

  So today, I went and when I turned on my computer from sleep mode, it was perfectly fine.  I was watching a video, surf on internet and MSN messenger when my computer froze all of a sudden.  I waited for release, but it didn't.  Given that I could not turn off the computer either, I had no choice but to disconnect it from the computer.  However, later, when I tried to restart, the screen would go black after the black loading screen.  Subsequently, it would just restart and startup repair would begin.  I tried to restore Systen and ran several times startup repair.  In addition, it does not even boot mode safe.  Here are the details of the problem for the Startup Repair:
   
  Problem event name: Startup repairV2

  Signature of the problem 01: AutoFailover

  Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

  Prob Sig 03:5

  Prob GIS 04:393220

  Prob Sig 05: NoRootCause

  Prob Sig 06: NoRootCause

  Prob GIS 07:0

  Prob GIS 08: 1

  Prob Sig 09: SystemRestore

  
  Prob GIS 10:0

  OS version: 6.0.6001.2.1.0.256.1
  Local ID: 1033

  Please help me find a way to restart the computer without having to reinstall Windows because I don't have a back-uped none of my files, so I would lose everything...

   
  Thank you
  Jeremy

  Hello

  ·         How have you tried to do system restore?

  I recommend you to restore system using a Windows Vista DVD.

  Here's how:

  To open the Options menu system recovery using a system repair disc or a Windows Vista installation disc

  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows Vista installation disc or a system repair disc previously.

  To use this method, you need to restart (boot) your computer using the disk.
  1 insert the disc.
  2. restart your computer using the power button on the computer.
  3. If you are prompted, press any key to start Windows from the installation disc.
  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.

  4. choose your language settings, and then click Next.
  5. If you are using the Windows installation disc, click on repair your computer.
  6. Select the Windows installation you want to repair, and then click Next.
  7. in the System Recovery Options menu, click a tool to open it.

• Vista Service Pack 1 update fails - computer will not start and cannot be repaired

  The computer which is an Acer desktop computer, running Windows Vista Premium.  In the last 6 months updated Vista tried Service Pack 1 update to install Vista about 8 times and failed every time a reason any.  Just before this latest incident, a facility was "cancelled" in the Middle for some reason any.  I restarted the computer and almost immediately was advised that there is an update, which turned out be SP-1.

  I started the update, and some time later I received a message that the update was successful, and that he had to be restarted the computer.  I clicked on the button restart and the Installation continues during the shutdown.

  When the computer tried to restart initialization failed and I ended up after several lines of information that looked as if it might be checking drivers and then information began to look as if she might be reading the register lines.  Each line has 2 numbers separated by a slash (/), who scored on a single line at the top of the screen, (white letters on black background) after a certain time the count to stop with the line of text of flickering on the same entry.

  It is the line that goes to the screen when the information keeps changing.

  !! 0xc01a001d!  37636/92292 (\Registry\Machine\components\winners\x86...)

  Since the failure of the Windows Vista SP1 update, when the system begins to start, after a short while, he starts playing what seems like lines in the registry, and after a few moments he always stops with the same accurate information just flicker.  At this point, it seems that this scenario will continue forever.  The hard drive is accessible, as if trying to read something, over and above.  The hard drive light flashes, instead of being on regularly, but only for a while.  After that, even the flickering stops.

  I have tried to start mode without failure, then after loading some files and after some time (5 or 10 seconds) the displayed files always end with the same file at the bottom of the list and what seems to be a status extend the message please know...  Shortly after the screen is empty, the fails to start and the computer is restarted.

  Usually what will happen is that the computer will begin to start up again, but because the previous boot failed, it asks if you want to go to startup repair, which, at first, seems to work fine, but after a little time it brings up a dialog box asking if you want to restore to the previous good Restore Point.  The display will then return to the same routine he had previously, and she runs to always if not interrupted.

  If you click the Cancel button, a message appears indicating that you cannot interrupt the current process, so the only way that you can try something else is to Shut Off the Power in now the switch down, permanently.

  [Note: the notes above have not all accurate messages, Word for Word, exceot for the Hex error line.]

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  Try to put the folder windows update catalog distribution and software
  Try the following steps:
  1. Insert the Windows Vista installation disk into the disk drive and restart the computer.
  2. When you are prompted to restart from the disc, press any key.
  3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.
  4. on the page to install Windows, click on repair your computer.
  5. on the System Recovery Options, click the version of the Windows Vista operating system that you want to repair, and then click Next
  6. in the System Recovery Options page, click command prompt.
  7. type cd C:\windows\winsxs, and then press ENTER.
  8 type ren pending.xml pending.old, and then press ENTER.
  9. in the registry editor, find and delete the following registry subkey:
  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HKLM\Offline Components\PendingXmlIdentifier
  HKLM\Offline Components\NextQueueEntryIndex
  10. at the command prompt, type exit to quit the registry editor. Press ENTER.
  11. click on restart
   
  More information:
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista: http://support.microsoft.com/kb/949358
   
  Hope this helps
   
  Kind regards

  Niranjan
  Microsoft Answers Support Engineer

  
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista will not start and cannot recover

  I have a desktop PC HP Compaq Presario, which has about 2 years. The problem started when Windows Vista was not able to start. It would load up on the "COMPAQ" screen and then it would just go to a slider black white screen with a flashing white light on the top left. Now that I've seen a lot of discussions with this similar problem, but it seems that people would rather not reformat in order to lose any important data. But in my situation, I have some important data on my computer so reformatting would be fine, except...

  -Recovery system won't work. I insert the 1 system recovery disk, all files loading correctly, it allows me to choose if I want to reset the computer to factory settings, I click Yes and it finishes the reformatting step. But then the problem comes when I insert disc 2, original content relocation step. It fills up to 10-16% and then I get a blue screen of death STOP: 0 x 00008086. I tried SEVERAL times and the same thing happens.

  -The next thing I tried to do is to fix the computer via a copy burned Windows Startup Repair. Loads everything up, I spent the page where I choose my language, currency, etc. The problem comes when I get to the System Recovery Options. There is no listed BONES and a box appears and says "Searching for Windows installations", and then it stalls just on this pop up. This problem is quite recent, because before there is no pop up and there is simply no OS listed, so I still could not repair or restore in any case.

  -Before, when I was able to go into the advanced options on the Startup Repair disk (when he was not of "searching for Windows installations" pop up to stall on), I'd go to the command prompt in attempt to chkdsk/r C:. All bad sectors or groups or something else would be fixed, and then he would hold to step 5 of 5 when checking free space.

  -In addition, I tried to make a diagnosis of memory via the Startup Repair tool. That's what I get:

  File: \boot\memtest.exe

  Status: 0xc000000f

  Info: The selected entry could not be loaded because the application is missing or corrupt

  
  

  Furthermore, I cleaned my computer, it is now almost completely free of dust. In addition, I can't get into the BIOS, I can't get into safe mode, and now I can't have in the command line

  Hello

  If you are unable to enter the BIOS and all the other problems, you have hardware problems
  and need the help of a real store of the computer (no leeks and glances at a Best Buy or any other
  Department stores) or Support of HP/Compaq.

  Compaq Presario Support
  http://www.Compaq.com/country/cpq_support.html

  Forums for HP/Compaq
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Vista will not start after the automatic installation of the patch Ms.

  My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Re: Vista will not start after the installation of update

  About 2 days ago I updated 2 Optional updates through windows update. It was - Input - Synaptics Synaptics PS/2 Port TouchPad
  and somethind to do with sound hdmi (don't know why I got this update ' cos I do not have a hdmi and I accidentally installed it as well).
  After that installs Vista won't start so I did a restore of the system in safe mode, and she came back to life, however, isn't in better shape, will probably not not to install Vista all over again.
  So be careful when you install these updates.

  It's weird that they came with windows update. As much I know usually windows update does not update if not needed harddrivers...

  You need to update your hardware drivers from the Drivers Toshiba download site and not from Windows update because no one knows if they interfere with the drivers of Toshiba.

• Windows vista will not start and is suspended on microsoft today updated. Stops on step 3 update

  Microsoft updated automatically to my vista computer today and now it does not work! It gets stuck on reboot and says "configuration updates step 3 do not turn off your computer" then hangs at 0% for a minute and recycles stuck in the same place again. Help!

  Hello

  Method:

  Follow the link below, perform the steps and check if it helps.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Let us know if it helps.

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

• Vista - computer will not start without the disc

  loaded vista on my computer - now computer will not start without the disc

  Went into my bios as suggested to check the boot order - and, Yes, I got HDD1 as first boot then CD - but then I remembered something I had seen earlier on my computer - it was on the list the HD which had my system like HDD0 files - so, I checked and there it was - listed option HDD0 so I changed HDD1 of HDD0 and was able to boot my computer without the disk system.  Hope this helps someone else with the same prob.

• After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  Get the error message...

  [	[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
  [	[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
  [	[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
  [	[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
  [	[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

  Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  Contact VMware support if necessary.

  System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

  to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

  to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

  to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

  System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

  to VirtualInfrastructure.Utils.ClientsXml... cctor()

  System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

  ...

  to System.Xml.Serialization.XmlSerializer... ctor (Type type)

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

  -End of the exception stack trace internal-

  -End of the exception stack trace internal-

  After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads