Receiver GPS Tablet 2 does not

Similar Questions

• Yoga Tablet 8 does not start

  I bought a Yoga Tablet 8 in November for my son-in-law for Christmas. He barely used it for 2 months and when it turns on it all that he gets is the Lenovo logo.

  I returned to the store who gave me the following Web sites to fix this.

  http://support.Lenovo.com/us/en/productsecurity/SUPERFISH

  http://support.Lenovo.com/us/en/productsecurity/superfishuninstall

  When I go to one of these sites my browser indicates that the page is not found.

  I have download the Lenovo Smart Assistant and installed on my laptop (Windows 8.1) then plugged the cable from the laptop to the tablet of Yoga. The Smart wizard tells me to confirm debugging USB has been activated (which is impossible because I can't start the Tablet) and does not recognize the tablet. On a few occasions, he does not recognize the Tablet but just says connection.

  Can anyone help?

  I took the tablet to the store and they have exchanged for a different tablet.

• When I receive a fax, it does not print, nor is it stored on my computer.

  HP has tested the printer when we installed. It is defined as the wireless. Fax test page printed. I had 9 pages received by fax Thursday, and they were never printed. Are not in my downloads. I couldn't set up the fax to save on my computer when the installation was made because I do not have a password on it. How can I get these faxes to print?

  Hello KatieRocks,

  Welcome to the HP Forums!

  I understand when you receive a fax, it does not print. What kind of printer you have? Click here to read: model number.

  How is the printer connected? USB or wireless?

  What is your operating system on your computer? Click here to read: Windows.

  Please verify this information and I will help you.

• Tecra M4 - Tablet function does not work do not

  Hey guys,.

  Please excuse my bad English, first of all.

  I got a Tecra M4 and after installing the drivers and xp tablet the tablte still does not work.
  I forgot a driver? Which is responsible for the tabletscreen?

  THX,

  Marti

  Hello

  You have installed the drivers who exactly? I checked the Web from Toshiba site and it shows some shelf tools that you install (Pack Tablet, Tablet PC button driver, etc.) and also to install the utility of Rotation. You can download everything here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  The site also shows an installation instructions document. Use this list as an order to install drivers recommend.

• 7 tablet (1800) does not connect to Wifi with WPA2

  I have a HP 7 1800 tablet, I had connected to my wifi at home using WEP security.  Everything worked well.  But I have a new laptop and need to change the WPA2 security.  Now, the Tablet does not connect.  I have all my other devices works fine.

  Why this 7 Tablet not connect using WPA2?

  I solved my problem.

  For some reason any the the mac address has been removed from the ACL when the change to the wire for WPA2 setting.  Does that happen ever, I looked there until today.

• Mobile profiles (phone and Tablet) screen does not display does not correctly

  RoboHelp 11 on a Windows 7 machine

  I have a small project that I asked in August and just pick it up again today. The only changes that I made today have a background color in the selected schema and adding browsers to the Profiles screen (mobile phone, desktop),. I also changed the pixel size of screen above and saved profiles, but eventually changed his mind and changed their return. I don't know if it would make any difference to this problem. (When I did size changes HR told me to update media queries, but I do not use all... or at least none came in functionality to handle media queries.)

  Then I re-generated output, but the Tablet and phone screen sizes are does not display correctly when I tested it by changing the size of my browser - there is a browser size quite large "dead zone" where no content is displayed at all (which almost makes appear as the 'sensible' part of the output does not work), inland navigation (front and rear bar and buttons) is pushed upwards in the header bar , and no horizontal browser scroll bar appears so that I can scroll to see the edge of the large images. I mainly use IE but it happened as well as Firefox and Chrome. The desktop display seems to work very well. (I'm sorry I have no screenshots now - I can provide some if necessary.)

  I was wondering if it had something to do with my chosen 'model' but a new project that uses that even a (Theme1_Standard) had no problem. Now, I also noticed that the model seems to have changed since I was last in Robohelp, because the overview of model unchanged today was not the same as the model from August. The Readme file for the latest patch does not mention everything that I thought that seemed to be related.

  As I said, I changed were all one color, browsers display profile and the profile screen sizes which I subsequently put discarded. I'm completely at a loss as to what caused this and how to fix it. I feel like an OAF comprehensive because it seems to be related to something I * DID * but back on my steps gave nothing.

  Thank you!

  UPDATE

  Still having this problem, but in poking around I discovered that some of the program files on my local machine have been updated in mid-September (when it looks like ReadMe file in the last patch was installed on my computer) and others have been updated mid-October (the first time I was in HR since mid-August, so anything is a not then generate). I don't know if this means anything, but to me it seems slightly suspicious. THX.

  I tried to reproduce the problem, but I can't get the the problem you describe. I do not have a dead zone and wide content scroll correctly.

  The screenshots are pointing to the former route Theme1, so there may be a problem here. Can you please try the following:

  • Delete the layout of your project.
  • In Windows Explorer, navigate to the folder! ScreenLayout! in your RoboHelp project and delete the Theme1 folder.
  • Claire the! SSL! folder.
  • Clear the DPC.
  • Remove the output that you previously generated to ensure that no old file remains.
  • Open RoboHelp, add the layout and generate without making any changes? It's working now?

  Just to be on the safe side, Adobe has released a fix for HR 11.0.3 that some sensitive issues in layouts, however not correct the issues identified in this thread: questions in RoboHelp 11.0.3

  Kind regards

  Willam

• Help! ThinkPad X 220 Tablet mouse does not work!

  Hey everybody,

  I need help really bad. My mouse on my thinkpad only runs under windows to load once I connect it stops and does not move. I looked at the settings and it says it works very well. I've updated all the software dirves and windows. I know a lot about computers and anything I can think of that would cause!

  Help, please! I need this tablet to work late at night!

  Press Fn + F8 and be sure that it is enabled. It tends to turn off without reason. Hope that works for you.

• I don't know but its all white: my tablet screen does not light, but the sounds and touch are ok. Please help me!

  I dropped it and now the screen does not light, but sounds like the notifications are on.

  Hi!, Sensei:

  Welcome to Forum!

  To help you, is necessary that you enter make, model (without serial number) and operating system.

• Tablet Y410P does not at all.

  I had the laptop for a day and once I got everything works well, the tracpad is out! I don't know if it caused, but it came out when I started HWMoniter (to check time CPU). I know that by clicking on Fn + F6 must disable/enable the touchpad, but it does not work. An external mouse works fine.

  Dear earthcoffee

  Welcome to Lenovo forums

  If you win 8 Please try F6 just

  Also try to remove the battery and the charger and press and hold the power button for 20 seconds

  Thank you

• USB flash drive receives an error "volume does not contain a recognized file system" in Windows 7

  I plugged my USB on a windows 7. He always invites me to analyze and correct or cancel. I cancelled each time, but I got bored with it popping up each time, so I said to investigate and fix.  A loading screen came so I waited patiently. After that it asks me to format my USB flash drive. I can't format it but because I have files from work to home and all my other personal files out there. So I cancelled the format, but every time that I plug it into my computer it asks t format. I even plugged in on a computer running windows XP and wanted to get in shape. When I try to run it without formatting as it is said, "E:\ is not accessible. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. "My question is... what we Windows 7 to my USB and how can I recover my data?

  This is common with USB drives used on different operating systems. It happens alwaysto me when I use my drive to work (which is managed since my MacBook Pro) on Vista and Windows 7 client computers. Like you, I learned the hard way you must cancel the digitization of Vista/Win7. The only thing to do at this stage is to connect the player to a computer that can read the files OR use the software of data recovery on it to get the files. I believe that Recuva can do it for free. Format the Flash DRIVE, then start again. Either way, you don't want to use a USB key as a single backup of important files because - as you have unfortunately discovered - stuff happens.

  http://www.Piriform.com/Recuva

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• My Gps blackBerry smartphones does not work?

  I have a blackberry curve 9300 and I want to use google maps but my gps do not work, it never finds my position and I can't even geotag a photo that I have lived my settings and turned on for example, the location of each thing maps of parameters settings, etc. Anyone know what to do?

  Try doing a battery pull.
  and to make the
  Click Options > Advanced > GPS > Menu > refresh GPS. While outside. Its recommended to give it 10 minutes

• Penn tablet function does not work. Cannot start the HID device

  On my Portege M200, I reinstalled WXP Tablet 2005. Under human interface devices, it detects a serial penn wacom tablet, a device interface human usb and an hid-compliant device.

  But penn isn't all fucntion. When I install the latest drivers from wacom penabled, I get a "wacom penabled HID minidriver" device but it has a yellow triangle with the error this device cannot start error 10.

  Is my tablet broken?

  (apparently you can not say penn on this forum)

  Hello

  May I ask where did you download the driver?
  It seems that the driver is not supported or is not compatible.
  Code 10 means-> device could not start.
  You simply need to use the driver from the Toshiba page and click on update driver to update the drivers for this device.

• Samsung tablet driver does not connect with my computer (windows 7)

  Hello I have a Windows 7 right and whenever I connect my Samsung galaxy tablet 3 USB it says device driver software was not successfully installed. I checked the updates, it didn't work, but I check the properties of the device it says error code 10

  Hello jasmine,.

  Thanks for posting your question on the Forum of the Microsoft community.
  1. If it works much earlier? If Yes, did you of significant changes to the computer before this problem?
  2. Have you tried to connect the tablet to another USB port on your computer?
  3. Are you able to connect the tablet to another computer?

  I understand that you get an error code 10 device when you plug your tablet computer. This error is due to some kind of unspecified driver or device problem. In your Windows Device Manager is not able to start the unit due to a driver-specific is not recognized. So, let's try a few steps to start in the right direction, diagnose the root cause and solve your problem.
  Method 1:
  Try to follow the steps described in the following link and check if the problem persists:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Method 2:

  You can also download the Software Kies from Samsung for Windows that allows you to connect your phone to your personal computer, makes it easier for you to synchronize data between the devices.

  Samsung Kies 

  Hope this information is useful. If the problem persists, please post back your results for further assistance, we will be happy to help you.

• X 60 tablet PC does not recognize home monitor

  I just got a used monitor which was working well, brought it home and connected to my X 60 Tablet VGA connedtion and nothing happens.  The external monitor is connected and turned on.  I read that the computer will automatically detect the new monitor just like when I attach an external hard drive, but this isn't the case.  No idea what could be the problem?

  Two things here... work from memory, since I very rarely use an external LCD:

  (a) go to control panel > display and try to get the machine to recognize the external monitor.

  (b) try enabling / disabling Fn + F7 and see if that does anything for you.

  Good luck and we keep abreast.

• More Tablet HP 10: 10 more tablets HP does not load

  Hi my tablet in addition to 10 HP won't hold a charge

  Thank you very much appreciated