Reception error "0x80004005: the operation failed."

Similar Questions

• Connect to the printer error code 'the operation failed with error 0x0000000a.

  not abe to have student access network printers

  Run this fix it.

  http://support.Microsoft.com/mats/printing_problems/en-us

  mohanad

• Why that I get an error called "check the operation failed" or "verify operations failed"?

  Why that I get an error called "check the operation failed" or "verify operations failed"?

  I have Adobe Acrobat X Pro

  I even uninstalled and reinstalled my Adobe Suite full - still the same problem

  Help!

  Acrobat Reader XI does not have this problem, but Acrobat Reader XI can not do all the functions acrobat X Pro can do

  I even tried to create a new user - not good - still the same error keeps popping up

  Help!

  Hi all

  There is a temporary problem with our servers which has now been resolved. If please re-launch Acrobat and let us know if still face you this problem.

  Thanks for your patience,

  -Ashu

• The operation failed because no appropriate resource is found

  Hi all

  I installed the version of piphany OVF vCloud on my ESXi. I managed to install all compontes, including organzization & VDC.

  No error spoted in my settings.

  I'm alwayes when you try to run vApps/VM this error:

  -L'operation failed because no appropriate resource was found. The operation failed because no appropriate resource was found.

  What resource is missing? I have downloadable storage... so what is the case.

  I don't know where to look... I tried to change the virtual machine hardware settings, has not solved the problem.

  Thank you very much.

  First off the coast of never change in vCenter which controls the vCD. It can really mess up your environment. I made this mistake when testing vCD 1.0 and 1.5 to try to match some of the things we were doing in the laboratory Manager.

  Then, don't worry ESXi nested because it's the same concepts, once you get the operational environment.  We run in our test environment of this way as well and didn't have any problems.

  What resources your ESXi (those nested used by vCD) hosts have in the measure of the number of vCPU (and speed) and the amount of memory?  How are other virtual machines running on them (such as your cell of vCD, vCenter, POSSIBLE, etc...)?

  As much as your benefits I guarantee that many resources to the virtual machine.  In our software development environment we guarantee only 10% of CPU/memory and we validate vCPU speed to the ESXi servers.  Looks like your screenshot, you have only capacity for 3.95 GHz but you have allocated 3.5 for the first virtual machine. At that time there you won't able to launch virtual machines more.  If guarantee you only 10%, you will be able to turn up more.  Given that you test just the product I wouldn't worry CPU contention at this point.  When you get into production, you will have more resources to fix this.  You are other options is to add more vCPU to your nested ESXi hosts.

  Eric

• System OR Configuration: (Hex 0x8004041F) the operation failed due to lack of dependence.

  I went to start one of my vi of today and I get this message: NI System Configuration: (Hex 0x8004041F) the operation failed due to lack of dependence.

  No one knows what it is or how to fix it?

  I finally fixed it.  After a complete repair of all my software from National Instruments does not solve it.  I've updated my fpga, labview real-time for 2013 SP1.  Everything seems to work again.

• Cannot send mail with attachment from message reads the operation failed an object could not be found

  Unable to send an email with a photo attachment. Once all the steps to configure the e-mail was followed and press on send, the message reads 'the operation failed.  An object cannot be found.

  Hello

  Welcome to the Microsoft Answers site. Please take a look at the following address:
  http://support.Microsoft.com/kb/312354/en-us
  If only it was not fixed, so it's more probablyy caused by an Antivirus/Firewall. Symantec Antivirus seems to cause this issue often (as well as other AVs). In this case, try to disable the mailscanner in your Antivirus and see if that solves the problem. Or disable the Antivirus add-ins related via Outlook. See here how to proceed:
  http://Office.Microsoft.com/en-us/Outlook-help/enable-or-disable-add-ins-in-Office-programs-HA010034127.aspx#BM9

  I hope this helps.

• When you try to copy a .jpg file in another folder I get an error "unexpected error prevents the operation."

  This is the error I got trying to copy a .jpg file in a different folder.

  An unexpected error prevented the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

  Error 0 x 80070021: the process cannot access the file because another process has locked a portion of the file.

  Any help is very appreciated.

  This is the error I got trying to copy a .jpg file in a different folder.

  An unexpected error prevented the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

  Error 0 x 80070021: the process cannot access the file because another process has locked a portion of the file.

  Any help is very appreciated.

  Apparently, Windows has a problem to download files larger than 50 MB.  To resolve this issue, follow these steps:

  In a security update, Microsoft has limited the size of files that can be downloaded from the remote folders to 50 MB. To increase this, you must change a registry setting.

  1. Download FileSizeLimit.reg
  2. Double click on FileSizeLimit.reg
  3. If necessary, enable the registry editor to run
  4. Click the Yes button to allow the changes need to be made
  5. Click OK
  6. Restart your computer

  For more information, please see the Microsoft article 900900 Knowledge Base.

• Necessary in anticipation of the operation failed, retrying not: COLLISION:

  Hello

  I was wondering if anyone has come across this message apppearing on the Broker Server?  He began to appear when we installed a broker of second and third replica server.

  Event type: Information

  Event source: VMware View

  Event category: VMware View

  Event ID: 102

  Date: 15/03/2010

  Time: 09:17:38

  User: NT AUTHORITY\SYSTEM

  Computer: VDI4CONNECT

  Description:

  Necessary in anticipation of the operation failed, retrying not: COLLISION: (PendingOperation: CancellingRefit on/VDI Datacenter / vm / view Desktops/VDI4-XP-ENG_SP3/VDI4-XP-ENG-SP3/VDI4-XP-ENG1 using cn = 1c3fdddd-1bec-4466-9d5b-3c05f0d9a2db, OU = virtualcenter, OU = properties, dc = vdi, dc = vmware, dc = int)

  We run VMware View 4.0.0 build - 210939 on all servers of broker.

  Thank you, Paul.

  Looks like the virtual machine may be missing in vCenter? Try to clear the VM wandering on the databases ADAM and composer, and that should solve the problem:

  http://KB.VMware.com/kb/1013635

  Mike

• test page, cannot print the operation fails (error 0 x 00000006)

  I can not print on a kyocera taskalfa 300i network. When I try to print a test page, I get the error next test page failed to print. operation can not be completed (error 0 x 00000006)

  read some info here (you may need to connect using any microsoft account):

  1. http://social.technet.microsoft.com/Forums/en-US/itprovistaprinting/thread/8eae0318-efc4-4087-91f9-3c27ad2ea4d6/

  Alternative workaround solution on another forum:

  Configuration and settings, then Control Panel then add a printer
  Choose "add a local printer. Click on "create a new port". Use the Local Port.
  Next dialog box is "Enter a Port name."
  Type the path to the printer: \\(computer name) \(printer name).

  It worked for me after MANY, MANY hours trying to do it by the "book".

  2. http://social.technet.microsoft.com/Forums/en/itprovistaprinting/thread/9c14dd83-2c71-45d3-8829-7e9cabb04d86

  or here in the microsoft community:

  3. http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/operation-failed-with-error-0x00000006-windows-7/3deb8c17-aa1d-40a1-bdad-20dc2c9cb3d0

• The action "Watch Me Do" has encountered an error. The operation could not be completed. (OSStatus error - 50.)

  Morning,

  • Material: Apple Macbook Air 13 ", mid-2013. 1.7 GHz Intel Core i7. 8 GB 1600 MHz DDR3. Etc...
  • El Capitan software to. 10.11.2
  • Automator to. 2.6 (419)

  I'm trying to automate downloads via iTunes take place during early in the morning to avoid using bandwidth more expensive. The operation (my apologies if I have the wrong terms, not a tech guy) fails and returns this error:

  The action "Watch Me Do" has encountered an error.

  The operation could not be completed. (OSStatus error - 50.)

  

  Is that what everyone has seen, or to which there is a known solution?

  Concerning

  James

  Watch Me Do is designed to replay the same click of mouse and keyboard events to the same speed.  Think of driving your car to work and record each turn and stop.  Then play each round and down at the same speed.  What to do if while reading the traffic moves a little faster or a little slower?  If you drive the same route to work, you could get a red light at an intersection that you had a green light to yesterday.  "Watch Me" does not know how to deviate from these changes, so he'll just to stop and report an error.  If iTunes launches slower or an event during playback takes longer to achieve because of different background running processes, it will have the same effect.

  Allowing automatic downloads in iTunes and help Automator to activate your device network at a specific time might be a better solution.

• First AID (10.11): "impossible to turn up the volume for the repair, the operation failed."

  Hello everyone

  I think I'm in trouble here...

  After I did a clean install of 10.11 two weeks ago, my Mac Pro 3.1 (2008) began to take a long time to boot up to the desktop. The actual load of the operating system (with the progress bar) is fast, but it takes a while (minutes) to enter my password until the computer is accessible at the level of the office. I have almost nothing the autostart value in Sys Prefs users.

  The startup disk is two SSDs over a Sonnet Tempo Pro and the folder of the user is on a separate HARD disk.

  Because the slow pace is the point where to enter the password, I thought that there could be a problem with the folder of the user HARD drive. I had my user folder on a HDD separated for the last several iterations OS X without problem, but in the fall, I needed more space and bought two new 3 TB drives (one for the clone SuperDuper). They ran very well in the Mavericks.

  When I run THE first AID on the volume that contains the folder of the user, I get the following error (it does not appear if I run first aid on the HARD drive itself):

  "First aid process has failed. Save if possible data on this volume. "The details section of the dialog box reads:

  "Update support partition for the volume to the need

  Impossible to disassemble for repair volume

  Operation failed... »

  Worrying, I get the same error if I run first aid on the volume of the other 3 TB drive that holds the user folder SuperDuper clone.

  I suppose that the two new 3 TB drives may be failing at the same time, but it seems a bit unlikely. Does anyone have an idea of what other causes, there could be for these errors?

  I would be very grateful for any help, as this is my main machine. Thank you in advance,

  EDIT: I realize I should have posted this in the OS X El Cap - my apologies for this forum. Also, I find this recent thread that seems to suggest that there is a bug in Dug, I get the same errors when I run first aid on my other two internal drives.

  Philippe

  BTW, I tried to start in safe mode, but that has not changed anything. Also, I created a test (with the record on the striped SSD) account. Representing loads very fast after that I entered the password.

  Thanks in advance again

  Philippe

• Sansa clip-drag & drop shockwave object corrupts - the error of the operating system "refreshing database".

  If by mistake, you drag and drop an object flash shockwave from your local directory from the PC to the sansa clip, corrupt you the operating system of the sansa clip. When re - start the sansa clip, clip progresses by up to 70% with error message "refreshing database", but fails to start successfully. If the press-'hold' button on sansa clip, the appliance does not start. It crashes with the error message "refreshing database' but doesn't load is not the operating system.»

  It was a user error to drag - move all the MP3 files in the directory of the PC, one of whom was of type shockwave flash object file.

  Help!

  André

  Try the clip board.  This is the map of the e200 series.

• Error message: the application failed to start because its side-by-side configuration is incorrect please view log for details application event

  Original title: cannot open programs

  I get this message when I try to run any program on my windows vista operating system: the application failed to start because its side-by-side configuration is incorrect please view log events applications for more details. I can't open any programs or files associated with programs IE Miicrosoft Office), any help would be sufficient. Please make your suggestions VERY user-friendly. Thanks in advance.

  Hi KenKenJr,

  1. are you faced with questions only when you open Microsoft Office programs?

  This error can occur because of a corrupted Microsoft Visual c++ installation.

  Step 1:

  If this error occurs only when you try to open the Office programs, you can check the following link and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Step 2:

  To resolve this problem, you can also install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

  Download and install Microsoft visual C++ from the below mentioned link:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  For more information, you can consult the following link:

  http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

  Hope this information is useful.

• my systems page will not open error message "the page failed to load".

  Original title: my systems page does not open after going into the control panel and then system and maintenance

  my systems page opens not after going under maintenance then system and Control Panel. This shows simply "the page failed to load". I need to access this page to share files from one computer to the other. can anyone help?

  Hi Sarah Brown,.

  (1) remember you to make changes prior to this problem?

  (2) what is the complete error message you receive?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• Error message = the driver failed charging USB\VID_0A5C & PID_5802 & MI_01\7 \Driver\WUDFRd & 95fd152 & 0 & 0001.

  WARNING on 13/10/2011 11:06:08 Kernel - PnP 219 (212)

  Log name: System
  Source: Microsoft-Windows-Kernel-PnP
  Date: 13/10/2011 11:06:08
  Event ID: 219
  Task category: (212)
  Level: WARNING
  Keywords:
  User: SYSTEM
  Computer: Buzz_Murdock-PC
  Description:
  The driver failed to load the device USB\VID_0A5C & PID_5802 & MI_01\7 \Driver\WUDFRd & 95fd152 & 0 & 0001.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      219
      0
      3
      212
      0
      0 x 8000000000000000
     
      145356
     
     
      System
      Buzz_Murdock-PC
     
   
   
      44
      USB\VID_0A5C & PID_5802 & MI_01\7 & 95fd152 & 0 & 0001
      3221226341
      14
      \Driver\WUDFRd
      0
   
  

  I know it's fine... I had the same problem and I stopped the error... I went into services.msc and last 'Manual' under 'Windows Driver Foundation - User - Mode Driver Framework' to 'automatic '.
  This stopped the error in Event Viewer.  It worked for me!

  According to microsoft, the error is benign... It's just a matter of latency.