Reception: Z:\Preboot\utils\spi\spilib.pyc could not be copied; Error 1392 = the file or directory is corrupted or unreadable.

Similar Questions

• VMware Workstation 9: could not open/dev/vmmon: no such file or directory

  I'll have a plethora of problems installing and get VMware Workstation 9 (9.0.2 build-1031769) to work on Ubuntu 13.04 (kernel 3.8.0 - 26-generic).

  I experienced exactly the same process on my laptop and it works perfectly, while on the desktop, it seems that everything breaks. Could someone give me some kind of help / advice on how I can do to get this working. I tried full uninstall / reinstall of the software, headers of the kernel, kernel images, different kernels, patches here on fresh installs of everything I can think of. Here are the issues I encounter in the order of importance (or so I think):

  (1) whenever I try to open my new (and virtual) machine, I get the error sequence of:

  "Could not open/dev/vmmon: no such file or directory. " Please make sure that the "vmmon" kernel module is loaded. '--> 'Failed to initialize the device monitor. "->" cannot change the power state of VM: could not find a valid peer to connect to '

  
  

  (2) every time I try to run the following command to configure the modules on a completely fresh setting (reinstalled kernel, vmware) I get the following output:

  sudo modconfig vmware - console - install-all

  Stopping VMware services:

  Demon of authentication makes VMware

  VM communication interface socket family is

  Virtual machine communication interface is

  Virtual machine monitor makes

  File system is blocking

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmmon-only '.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/driverLog.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/hostif.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/apic.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/comport.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/cpuid.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/hashFunc.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/memtrack.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/phystrack.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/task.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/vmx86.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/vmcore/moduleloop.o

  LD [M] /tmp/modconfig-G9S0TM/vmmon-only/vmmon.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmmon-only/vmmon.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  CP f vmmon.ko. /... vmmon.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  Using 2.6.x kernel build system.

  make: entering directory ' / tmp/modconfig-G9S0TM/vmnet-only»

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/hub.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/userif.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/netif.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/bridge.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/filter.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/procfs.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/smac_compat.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/smac.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/vnetEvent.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/vnetUserListener.o

  LD [M] /tmp/modconfig-G9S0TM/vmnet-only/vmnet.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmnet-only/vmnet.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  CP f vmnet.ko. /... vmnet.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmblock-only.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/block.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/control.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/dentry.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/file.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/filesystem.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/inode.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/stubs.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/module.o

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c: in function 'ExecuteBlockOp ':

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c:285: warning: assignment of incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c:296: warning: passing argument 1 of the "putname" incompatible pointer type

  include/Linux/FS.h:2052: Note: expected ' struct filename *' but argument is of type ' char *'

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/super.o

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/inode.c:49: warning: initialization from incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:38: warning: initialization from incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c: in function 'DentryOpRevalidate ':

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:104: warning: argument passing 2 of 'actualDentry-> d_op-> d_revalidate' makes whole pointer without a cast

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:104: Note: expected 'unsigned int' but argument is of type ' struct nameidata *'

  LD [M] /tmp/modconfig-G9S0TM/vmblock-only/vmblock.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  Warning: "putname" [/ tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmblock-only/vmblock.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  CP f vmblock.ko. /... vmblock.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmci-only.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/linux/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/linux/vmciKernelIf.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciContext.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDatagram.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDoorbell.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDriver.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciHashtable.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciEvent.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciQPair.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciQueuePair.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciResource.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciRoute.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/driverLog.o

  LD [M] /tmp/modconfig-G9S0TM/vmci-only/vmci.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmci-only/vmci.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmci-only/vmci.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmci-only/vmci.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmci-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmci-only.

  CP f vmci.ko. /... VMCI.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmci-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vsock-only '.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/af_vsock.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/notify.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/notifyQState.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/stats.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/util.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/vsockAddr.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/driverLog.o

  LD [M] /tmp/modconfig-G9S0TM/vsock-only/vsock.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vsock-only/vsock.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vsock-only/vsock.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vsock-only/vsock.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  CP f vsock.ko. /... vsock.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  Starting VMware services:

  Virtual machine monitor failed

  Virtual machine communication interface failed

  Family of VM communication interface socket failed

  File system is blocking

  Virtual Ethernet failed

  Demon of authentication makes VMware

  Cannot start the services

  (3) I often get the Ubuntu "this program has planted" messages on "/ usr/lib/vmware-installer/2.1.0/vmis-launcher" "' (this message of crash always occurs when you run the"vmware-modconfig"above command on a new installation.

  (4) at different times during Assembly and have VMware workstation on my system I get Ubuntu hangs on "/ usr/lib/vmware/bin/appLoader" and even "/ bin/su" (especially when you are trying to install - su NEVER blocks anywhere else).

  Thoughts / ideas on what is happening on earth / what could have caused this all go so downhill / how to go about fixing?

  Thank you

  Solved.

  The problem is that for another program I used gcc - 4. 4 instead of later. Restore the (by update-alternatives - config ) for gcc, g ++ and CPC - bin.

  Not a very graceful exit to have a version not valid I would say, maybe some sort of basic check could be added to ensure that the correct versions are present?

• "Could not complete your request because the file was not found."

  Hello!! I can't open any file .jpg in trial version Photoshop CC 2014. I get the error message "Could not complete your request because the file was not found."

  .png and .psd files work perfectly well. Any help would be greatly appreciated.  Thank you

  Error: 'File not found' when opening JPEG files Link to the installation program Adobe Camera Raw 9.4.

• I have a mac and I got this massage after I tried to save my cc photoshop photoshop system could not complete your request because the file was not found.

  I have a mac and I got this massage after I tried to save my cc photoshop photoshop system could not complete your request because the file is not found, can someone help me? Thank you

  I installed the 9 raw and everything is back to normal thanks for your email about /peyman

  Skickat fran min Samsung-enhet

• I can't open the RAW files from my Nikon D800 (i.e. NEF files).  I use a Mac with Photoshop CS5 and El Capitan 10.11.2 version running.  I get a message "could not complete your request because the file appears to be a model of camera that is n

  I can't open the RAW files from my Nikon D800 (i.e. NEF files).  I use a Mac with Photoshop CS5 and El Capitan 10.11.2 version running.  I get a message that "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for more information. "Yet the Nikon D800 is on the list of supported devices.  Can anyone help?

  And temporarily disable the Gatekeeper by allowing downloads from anywhere, or your installer will be marked as 'damaged' because that CS5 is out before Gatekeeper and is not "signed" that is not approved.

  

• PS: Could not complete your request because the file was not found.

  Mac OS X 10.7.5.

  PS CC 2014 2.2.

  Since I've updated my CC of the PS today, I'm unable to open jpg in PS files, even the JPG files that I had no problem opening in PS so far. Whenever I try, I get the following error message:

  "Could not complete your request because the file was not found."

  (I'm able to open PSD files, however.)

  Help someone? Much appreciated!

  Which could result from the 9.5 camera raw update.

  Error: "file not found" when opening JPEG files

• Error: Could not complete your request because the file was not found. Help!

  I've updated Photoshop CC and now if I try to open any file (jpg, psd, etc.), I get an error message: could not complete your request because the file was not found. Files lived on a hard drive, then I moved into the office... still no go. PS I uninstalled and re-installed. Same mistake. Here are the best, I can open the files very well in my old Photoshop 5.1... Any ideas? Working on a Macbook OS X 10.7.5 (really hoping that I don't have not updated to El Capitan)

  Hi banderababe,

  Photoshop CC 2015 is not compatible on Mac OS 10.7.5, however if you only use the version of Photoshop CC, then you can try to reset the preferences of Photoshop back to default values.

  "To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  System requirements:configuration of Photoshop

  Let us know if that helps.

  Kind regards

  Mohit

• Since the update, I can't open a JPEG file: "Could not complete your request because the file was not found."

  My subscription to creative cloud updated Photoshop the other day. My iMac is running 10.8.5. Ever since this update, I can't open a JPEG file and get a message indicating "could not complete your request because the file was not found." I'm sure it's related to the update, but how can I cancel it and get things to normal?  (do not include your email)

  Post edited by: Eugene Fornario title should be brief, but descriptive.  No personal information in post.

  Hello

  Please refer to this article error: 'File not found' when opening JPEG files and try the workaround provided.

  Let us know if that helps.

  Kind regards

  Assani

• Cannot open JPG files in photoshop, error "could not complete your request because the file is not found.

  Cannot open JPG files in photoshop
  Has anyone ran into this problem? Photoshop worked perfectly in the past and the other day I noticed that I can't open all the jpg files in Photoshop (tried all the usual ways to circumvent the opening problem), I get the error message: "Could not complete your request because the file was not found." I know that JPGs are fine, as they open in other applications. My work-around for the moment, is to open in preview mode before and export as a PDF file, then open the PDF file in photoshop, however, this is not ideal.
  Someone at - it in the case, or have a fix
  Any help much appreciated

  Dan

  Hi Dan,.

  Please install camera Raw from following link: Camera Raw of Adobe Photoshop CC and CS6 Installer

  Once done, open file Jpeg, you shouldn't get the error more.

  Let me know if it helps.

  Kind regards

  Tanuj

• CC Photoshop crop tool - error: could not complete your request because the file was not found.

  So since the last update to the new user interface, I was not able to reframe my documents (patterns of web page) without getting the error "Could not complete your request because the file is not found" - the file is clearly there and can be saved, and I can restart photoshop and open it again without any problem, but still suffer the problem of harvest tool. Also since I shut down my computer and reopened it and it is not resolved. Any help would be greatly appreciated!

  Happened to me - fixed by re - link the logos files that have been lost.

  A. I wasn't expecting my dynamic objects related

  (B) same as above

  Easy fix, just look for small red icons on some of your layers - then right click > replace content > change 'em out

• I want to edit my images raw on photoshop cs5.  But when I go to open the. CR2 file, it says: "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw. Please visit

  I want to edit my images raw on photoshop cs5.  But when I go to open the. File CR2, it says:

  "Could not complete your request because the file appears to be a model of camera that is not taken in charge by the installed version of Camera Raw. Please visit the Camera Raw help documentation for more information.  ''

  When I go to the updates using photoshop I try to update photoshop and photoshop camera raw, but it then says

  "Updates cannot be applied to the error log file can help you identify the problem. Then try to update again. If problems persist, contact customer support for further assistance.

  8.7.1 (CS6) Photoshop Camera Raw there is an error in the installation of this update. Quit and try again later. Error code: U44M1I216 "

  I don't know how to get around this help please

  CR2 files of what Canon camera?

  Supported cameras is listed here

  Camera Raw plugin | Supported devices

• Error message "Could not complete your request because the file is not found" using Photoshop Cs6 (latest)

  I use mac, when I update photoshop cs6 10.0.0 to 10.0.1

  I try to open the photo (jpg), but the photoshop said

  "Could not complete your request because the file was not found."

  After I have try another file type (png, psd design image), is work.

  also I try to uninstall photoshop and install again.

  There always (.. .the file was not found.) problem.

  No one knows what happens to my photoshop?

  Thank you!!!

  Hi all

  1.

  Can you please check if Camera Raw is updated, if not! try to run an update to Camera Raw 9.4 from here: Camera Raw 9.4 now available

  OR

  Camera Raw installation of Adobe Photoshop CC and CS6 program

  2.

  In addition, this could help:

  JPEG marker error invalid when you open images in Adobe Photoshop

  Thank you

• "Could not open/dev/vmmon: no such file or directory." Please make sure that the "vmmon" kernel module is loaded. »

  I installed vmware Player on a linux Open Suse (32-bit), the supplied file .bundle machine. It worked very well, and I could load my file of virtual machine very well. Then, my machine had a random failure. When it restarts, I could no longer use my virtual machine, always get the error:

  "Could not open/dev/vmmon: no such file or directory."

  Please make sure that the "vmmon" kernel module is loaded. »

  I look in / dev, and of course, there is no vmmon. I see a lot of archived messages stating that you must run the script ' vmware - config.pl '... (more specifically the following link: ) http://blog.solutionperspectivemedia.co.UK/?p=6 )

  but I do not have it. It seems that maybe it was a part of the installation (no-bundle) more old?

  What should I do? Is this a known problem, as indicated in this Web site? Or random failure caused something? I'm quite confused.

  Have you tried to uninstall as root? Otherwise I think it won't work.

  With respect to your original problem, I got it, too, and that's what I did:

  sudo mv/usr/lib/vmware/modules/binary /usr/lib/vmware/modules/binary.old

  vmware-modconfig--console--install-all--appname sudo = 'VMware Player' - icon = 'vmware-player '.

• Could not complete your request because the file format module cannot parse the file.

  I am trying to open JPEGs with Camera Raw - some work OK but many fail with the following error:

  Could not complete your request because the file format module cannot parse the file.

  Anyone know why it's a failure or how to fix it? I searched the forums and the Internet (with Google) but cannot find anything.

  Using Photoshop CS5 extended (12.0.4) on MacBook Pro with Snow Leopard (10.6.8). Jpeg files have been copied to a Nikon D90 on a Windows 7 machine and then on my MacBook. As far as I KNOW, I did nothing for them on the Windows machine.

  Thank you

  Doug

  The files may be corrupted or the files may be a camera that is newer than your version of ACR (make sure that you have installed the updates of the cab).

• Could not complete your request because the file is not compatible with this version of Photoshop.

  Hi - I tried for a few days in order to reopen all file ive created with photoshop cs5 but ketting the same message "Could not complete your request because the file is not compatible with this version of Photoshop."

  the file is a psd file (just the regular photoshop save as an option) and the file in photoshop consisted of a quicktime movie file - which stood on a layer... (which I could rub through in the animation timeline) and a new layer video in which the individual frames, I drew some images with the brush.

  I can play the video with two video layers in ps cs5, but when I record and try to open I get the message "Could not complete your request because the file is not compatible with this version of Photoshop."

  I have no antivirus or norton... programs etc on my computer

  and ive tried to do this on a mac and a pc and get the same result.

  its crazy because im saving the file with the same im version tries to open it with.

  any help meet me would save a looming deadline.

  Thank you

  I noticed that the psd file is only about 10 MB, but the movie quitime file (as a stand-alone file - (before that I made in photoshop is 650 MB)) - is this a problem?

  Have you installed all the updates to Photoshop CS5? (the current version is 12.0.3)