recognition tool does not support more than one model

Similar Questions

• HA mode does not support more than one VC DC?

  OK, this is a minor blow of mouth/feature request...

  So according to what follows - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2115878 #sf39023518

  vROps HA does not support separate nodes in DCs, it was a surprise for me, especially when the reason is latency again during a test on a 10 Gbps LAN it still does not work after a period of time(<2ms)

  Part of my hope/expectation (rightly or wrongly) was to cover 2 physical DCs (2xVCs) give me a solution truly HA when in fact the PA are now limited to be local HA (one could say that you can count on vSphere HA)

  Even in local mode HA doesn't protect you waste of time during the correction of the product... If its value decreases...

  Now, if I missed something please let me know I'd be happy to see different results from what I see above.

  Otherwise, consider this a feature request that vROps is really a great tool, but HA must be more that she should now be regarded as truly HA IMO.

  RV Ops HA is not intended or designed to manage data centers. Latency conditions are tight, stretching on domain controllers, it is impossible at this time (v6.0.2). HA mode is designed to protect your data/cluster falls down if you lose a single node of the cluster. The recommendation is to put the replica on host/different data store, so even if you leave the underlying resources for the master, you still have you cluster config/master role online. I support your hope that HA will get better, and I am sure that he will do!

• Firefox does not open more than one window, only opens new tabs. Firefox does not open in safe mode.

  Firefox does not open more than one window at a time, and then opens only new tabs. When asked to open the link in a new window - nothing happens, no error message or the page appears. Otherwise, it works great, but no new firefox window cannot be opened menu or the mouse. I tried to reinstall firefox several times, which did not help.

  This has happened

  Each time Firefox opened

  Is 3-4 months ago

  There are some extensions that are causing a problem like that. See this:
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• Thunderbird supports more than one e-mail account? How?

  I'm looking for an e-mail program that supports more than one e-mail account easily. Is Thunderbird such a program? How can I have three accounts for different purposes?

  _{Edit: deleted for your protection - personal information it is not a good idea to post your addresses to the public unless you want to invite a few more spam. (philipp)}

  I'm not aware of any limitation on the number of accounts, I had support contact with people with hundreds of account set up.

  File (ALt + F) > new > existing e-mail account
  or
  In the toolbar > New (move your mouse until the submenu) > existing e-mail account. >

• I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  original title: why isn't my laptop recognize the eathernet link?

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, start by installing the card mother/chipset driver first,
  then the SATA, Audio, USB, LAN, etc, drivers.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• HP 3015 printer does not print more than 1 copy both

  Original title: all-in-one Hp 3015

  3015 HP all-in-one does not print more than 1 copy at a time.

  Hi James,

  Looks like a problem of printer settings.

  Here is something you can try.

  1. Select Start, and then devices and printers.

  2. right click on the HP LaserJet 3015 printer icon, then select Properties.

  3. Select the device settings tab.

  4. find Mopier Mode and storage of work settings.

  5. change the settings from active to disabled.

  6. click on apply then OK and then try to print.

  It has worked for many users. It might help you as well. Answer please if you have any questions.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• the HP Pavilion Elite HPE-410y desktop PC supports more than one hard drive

  topic says it all...

  the HP Pavilion Elite HPE-410y desktop PC supports more than one hard drive

  Hello

  ' HP ' how-to ' article should be useful.

  My e9280t has the same firm and the drive cage holds two drives.

• more than one model can be applied to a target?

  Our company already uses OEM to monitor DB however followed OS was done with another tool.  We merge into OEM for all monitoring and the question came, if more than one model can be applied to a target.  I read where separate models of monitoring can be created for each type of target, as a model of headphones, a host model and so on.  If I understand that correctly then a server can have a host (processor, memory, network to think) model and a model of DB (earphone think and db); is that correct?

  My idea is to create a basic model for operating system control the essential elements, such as mentioned earlier, and then have other models of application of riding at the top of the base model of the OS.  The OS model alert the team responsible for the OS and the application model's enforcement team.

  I hope I used the correct terminology, I am new to the OEM.

  Thank you

  Yes, you can apply a 2nd model, but the last applied wins in what concerns the same measures.   Read up on the application options here - http://docs.oracle.com/cd/E24628_01/doc.121/e24473/mon_temp.htm#EMADM12269

  I also encourage you to look into the Group of Directors and the Collections available in 12 c model.  http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/administration_group.htm#EMADM10011

• Error - device 0 video card does not support at least shader model 2. Please update your card.

  Original title: Windows Xp graphics Shader model 2.
  We receive a message that says "device 0 graphics card does not support at least shader model 2. Please update your map"for a new pc game SIMs3... can you help me with this, please. We have downloaded the version lasted Grphics Intel for Windows;  Where map video to update / upgrade? Thank you for your time.

  Hi Yagimc,

  What is the model of the graphics card?

  To play SIM 3, the graphic card must meet the following requirements:

  DirectX 9 compatible .0c card with 128 MB RAM (NVIDIA FX 5900/ATI 9500 or better) and support for Pixel Shader 2.0.

  You can contact Intel support to check if your graphics card supports the above features.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LaserJet Pro 200 M276NW color does not print more than once; application freezes

  Hello.  I had a problem with Laserjet Pro 200 color M276NW my family when printing from my desktop Windows 7 (64 bit) for quite awhile.  The first time I print a document after starting my computer, it prints the entire document very well.  However, the print jobs will simply freeze the program that sent them (for example Outlook, Opera, etc.) on a screen ' print the page of.  Also, I can't print a test page in Windows when the first task is completed.  I finally realized that it probably has something to do with the spooler service in Windows, or in the print queue.  When I look in the queue after printing the first document, it shows that the paper in it, but the new job that froze my app does not appear.  After I restarted my computer, I can print a document more before I have to restart again.

  The printer is networked on our home network; It is not connected to any computer via USB, and in my opinion, is the connection to the ethernet router.  My computer is connected to our network via a wireless connection.  I tried to restart the spooler, enter the IP address of the printer in my web browser (which works fine and shows the right page), and everything else listed in the Help article.  Try to open the printer properties in devices and printers does nothing.

  To complicate, the printer won't even print the first work since I got on my computer and I tried this today.  Also, I got exactly the same problem on my laptop, which also used Windows 7 and connected to our home network wireless. The laptop now has Linux on it instead. I tested several printing on it earlier and they print very well.

  My father, who has a wired connection to the router, told me that it is able to print more than one job very well.  I just had my brother (who also has a wired connection) print two different documents, and it has worked very well.  This leads me to believe that there is somehow something to do with the Wi - Fi computer assigned to the router, in combination with Windows 7, apparently.

  Moon Raker, starting with the sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

• LaserJet P1102w: Printer does not print more than 2 pages

  After I've upgraded to Windows 10, I noticed that my printer would print no more than one page, even if several page were supposed to print. (I can't tell if this coincides directly with my move to Windows 10, because it seems that the problem did not begin immediately.) I reinstalled the drivers and software and now it is printing only two pages (as opposed to one), but the problem remains. Can anyone offer suggestions on how to get my printer to print normally again? Thank you!

  I uninstalled everything related to my HP printer (in the Device Manager: printers and print queues) and searched my computer for everything related to my HP printer and deleted stuff also. Then I reinstalled the drivers and software from the HP website. I have updated Java also (I have no idea how much this has to do with my impression). I have my printer is off and unplugged for one minute before Relighting. I restarted my computer and now it seems to be printing normally. Praise the LORD!

• I get a pop up screen I need, but the screen is very low and does not allow more than 1 line of information while IE shows the window contextual integers of 27 lines

  I play games that allows me to send gifts to your facebook friends and when I click on send gift, a screen with the names of my friends will be displayed so that I can select the ones to send to... but since yesterday morning, the pop up screen using firefox became so weak that it allows only one line and it does not allow me scroll more than 5 times... While the IE pop-up window shows 27 lines at once, and I can scroll the following 27 and so on... I have pictures of the screen if you need...

  You should be able to resize the window pop - up to enlarge.

  You allow sites resize the popup window?

• : HP AiO 3540 3540 HP printer does not print more than 3 pages in a row.

  I bought printer HP 3540 one month back and at that time I had no problems but now I am faced with a rather irritating and page issue of waste.

  whenever I give an order to print the pages more than three 3, this printer prints up to three pages and on the fourth page after printing it half, cancels automatically print order I gave and I give over and over with a new page print order. It costs me more that it is wasting more pages then it is printing.

  All the pages I printed were in black ink. I tried not to print more than 3 pages in color.

  Please help, it's really frustrating.

  Hey @adv_deepesh,

  Welcome to the Forum from HP Support. I hope you enjoy your experience here.

  I understand that you encounter an error when printing multiple page documents using your HP Deskjet Ink Advantage 3540 e-all-in-one printer.  I want to help you with this.

  First of all, I recommend to run you HP and Scan Doctor for Windows printing.  Click here to install. This utility is designed to detect and automatically fix common software problems.  In addition, I suggest that you install the fix for Windows 8.1 - (click here to download).  This software update was created to answer the specific question you are a statement.

  In addition, if you are still unable to print documents with pages 3 +, I recommend you uninstall your printer and click here to reinstall the printer.

  Try these steps first that and please let me know how you did by responding to this post.  If this approach is less than a resolution, I will be happy to deepen assistance.  If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Motorola Backflip - will not send more than one text

  Hello

  I try to write a message that is more than an interesting text. It will no longer send... it will send the first text then it will repeat "SMS not sent" so that many other texts that have been in my initial shipment. It started just happens, that I've always been able to write a message as long as I want and it will happily send multiple text messages without complaining...

  Does anyone know where I can change this setting. I looked in the settings of Message but you can see nothing is there.

  I can't see anything under settings associated with it.

  Help, please!

  Thank you.

  Hi I have not installed anything related text. Infact I have only installed the apps were already there before resetting. Assistant Android is on everything until now lol. Its ok that I watched and apprently I can install a 3rd party sms management app that will do it for me. As long as I have a work around its ok. I just thought that there must be a setting somewhere so that it goes like this...

  Thank you.