Recognizing the touch of a button only once

Similar Questions

• Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  I don't think I understand what you are trying to accomplish. You can connect a button on the front of the smart camera and trigger each acquisition. In VBAI check the triggered Acquisition under the tab trigger for the step to acquire Image (smart camera).

  Your smart camera is hooked up to a monitor? Is there something that you must do in LabVIEW that you can't do in VBAI about the step of user input?

• Why I can't to the previous page by pressing the back only one button only once?

  Hi it. My problem is when I try to go back to the page previous (s) and hit the back button nothing happens. I have to hit twice or three times to force the action. What happens after the last update of mozilla. I know that in previous versions of mozilla, you have to click twice to return to previous pages, but in recent versions you might come back with a single click (double click remained as a choice for the romantic...). Is it a question of set upward? Please answer because it's really annoying...

  See http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

  Also, can you try to start Firefox in Mode safe to see if Firefox works correctly without error? You can start Firefox in Mode safe below:

  • Windows/Mac: choose Help > restart with disabled modules
  • Linux: run firefox-safe-mode in the Terminal/Konsole

  If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.

• Allow the user to take exams only once?

  Is it possible to allow a user to take only a review once?

  I have 4 exams, and they are all separate captivate files (IE: exam 1 exam 2, exam 3, 4 review), they are in no way bound together, but is it possible to see if a user has taken 1 exam, and then forbid them to once again?

  Thank you

  To remove this you will need to store variable data outside the Captivate module that records if the user has attempted a given questionnaire.

  Captivate standard does not currently provide a way to write persistent data out of the module of Captivate.  But fortunately there are now widgets that CAN do.

  Find out here: http://www.cpguru.com/2011/10/04/save-and-load-data-widgets-for-adobe-captivate-updated/

  With the widget to save the data, you can write data to a variable from shared object on PC of the user who registers the fact that they tried a quiz, and what mark, success or failure etc.

  Then on the same or subsequent modules, you can insert the other gadget to load data to read the stored variables and use advanced Actions to decide what to do.

  For example, considering the widget Load Data that the user has already tried the test of the current module, it could immediately jump to a slide that informs them of the the fact that they have exhausted their allocated tries and will not be able to do the test again.

  You will need to think through all possible means, that a user might try to thwart your attempts to lock them.  For example they bypass the warning and even the chance to quiz via the navigation bar or OCD.

  But you can see how widgets make this possible solution?

• Form of the loading image of jars only once in oracle 10g

  Hello
  
  I have a 10g oracle forms application that loads the image of a jar. Whenever I click on a button 'A' which loads the image 'image' on another button 'B' in the same screen, a message appears in the java console "loaded image: jar: https: / / + IP + / forms/java/+myjar+.jar!/image.gif '. So after 10 clicks, I get the message even displayed 10 times. In the form, I called:
  

  SET_CUSTOM_PROPERTY(p_object_name, 1, 'IMAGE_NAME_ON', '/'||p_image_name);

  My question is this:
  -is it possible to load this image once and use it later without having to load each time I clik on "A"? If so, how?
  
  P.S.: If this thread should not be posted in this forum, please redirect me to the right.
  
  Thanks in advance

  In the once - new - form - Instance trigger defined visible load, button, image, then re - set button is not visible.

  François

• How to transfer data from the data in table 2D only once file?

  Attached file will write same data in table 4 times 2D file. Output must be in a table 2D.

  Someone will provide a solution or a reason to explain why the data are been ouputted 3 more times? Thank you

  I already told you a better and more effective method. The function of reading worksheet is on the exact same range as your text file and does everything for you. If you insist for some reason strange kernel to reinvent the wheel and write your own code, take the correct path. The use of 4 separate spreadsheet String to Array is the cause of your problem and I already said too much. Don't you think that get you 4 times the data is in correlation with the fact you are using 4 times the functions necessary at all? It is simply not true. Look at the diagram-writing block on a spreadsheet file.

• My new Publisher El 12 runs only once after restarting the PC - how to fix?

  My new publisher of 12 items, runs only once after restarting the PC and seems to work well. I did a "clean install" repeatedly (cleared Temp files, shut down all applications, including Norton Antivirus and then installed DVD after a clean reboot). I can launch organizer of 12 elements several times, but the photo that editor runs only once. After that, I have to restart the PC, and then I can run the Editor again, but once again, only once. I also first 12 items for video files - no problem, he launched several times. I see that Alfredo has a similar problem: How can I fix?... is it a bug of El 12?... Thanks for your help... k-paul

  Thank you very much Peru Bob... your statement works... of course, this stitching is 12 items of closing/out not really closes it (which is why I could not re - start it), so there's always a problem... I can live with that, but why would the program stops not when I close?... k-paul

• Satellite U400 - problems with the Panel, the touch and media keys

  Hello, I have the TOSHIBA Satellite U400. Everything's a lot but I have some concerns.

  1. the touch screen (media buttons on the top of the keyboard - mute-media-play/pause-stop-rewind-forward-) turn
  the computer running if you touch! How to stop that from happening? I only need to use the POWER button.
  Start button / stop is sufficient.

  2. press MUTE on the touchscreen, no its not really "mute" or "disable." Instead, she don't
  is the Tower the White Glow Light for all Touch Panel ON and OFF (including the word "SATELLITE").
  How can I make it works?

  3. When you connect to Windows, I can choose between the password or RECOGNITION of FACES. How do I
  Assign the FACIAL RECOGNITION only without having to choose it?

  Thank you

  SAL :)

  Hello Sal

  I played around with this stuff and here is my opinion on this subject.

  (1) as far as I know there is nothing strange. I noticed the same thing on notebooks too. For example, if you want to listen to music, you can simply press PLAYER button (3rd from left) and begins at will for laptop and open windows media player. If you want to go on the internet you can simply press INTERNET ((deuxieme button on the left). Laptop will be put into construction and Internet Explore will be open.
  So there is nothing strange, and even get on my Satellite P200 and brand-new Satellite A300.
  To be honest I don't know if this can be disabled. I'll ask a friend of mine. It is monster of Toshiba and maybe he knows more about it. But this behavior is certainly not strange.

  If you want to use only the power button and then press power button to start. Do not touch the other.

  (2) Please check s operating manuals and look for info on this button. AFAIK it is clearly written Mute or LED on / off depending on the model you purchased, press this button to mute the sound or turn on or off the illumination of the logo of the brand, touchpad and buttons.
  So please do not mix anything. This button has no two options. On your model, you can disable illumination only. It is the same on my laptop. So there is nothing wrong with your laptop.

  (3) you also misunderstood this feature. If face recognition is activated the two options will be displayed. If you do not want to enter a password you can use the option of face recognition. But what you will do if for some reason your face may not be identified correctly. How you want to connect?

  So, please don't be irritated by these things, everything is OK.

• Response of the touch screen

  I recently bought a good 'as new' Tungsten T.  The response of the touchscreen is erratic at best.  Most often it there is no response when I try to arrow over another week, tap a letter on a typewriter, etc.  It's embarrassing.  I'm in a 90-day warranty period.  Any suggestions for a fix?

  The key on the device can be a drop off. Try typing a fall upwards or downwards or sideways to determine how much off to the touch is really.

  Once you determine that you can try to enter a drop to the 'off' your screen part so he can take your faucet.

  Another option is to calibrate or realign the touch of your device. Click Home > Prefs > digitizer/touch screen and then follow the target by clicking on the x in the Middle 3 times in a row. This should realign your touch for you.

  I hope this has been helpful!

• Change the page layout in iExpense so this button bar is shown only once.

  Hi all
  
  In our standard iExpense page, for Exam fee screens button bars are ongoing posted TWICE - at the top of the page and the bottom. But I want that this button bar to display only once. I tried to see where it is defined in the section of page layout to reorganize but am unable to zero in where to make this change.
  
  Pointers?
  
  Kind regards
  Archana.

  Archana,

  You mentioned, I submit my page, I am taken to review the page again.
  The review page is the second page on the right, how you found the box on this page.
  Maybe the same region is divided between the first and the second page.

  In this case, when you get to the second page (review) must check your controller extended with page you're in and get the handle of your box and make it readonly.

  Otherwise, add your checkbox in a region where it is not shared in the review page.

  Thank you.

  With respect,
  Kali.
  OSSi.

• The button works only once?

  The problem:

  Play the animation, and after clicking the button once it no longer works. The button takes you to the frame labeled "shake". I want to continue to make you "shake" whenever he's in a hurry, but it's not.

  The installation program

  I have a button inside a clip - actually its 2 inside. The first MC crosses and stops on the stop(); framework and that you click on the button that sends the playback head to the section titled "shake" which plays the next MC with the same button inside. I put the button action on its own layer on the first image. The length of this sequence of buttons from the first keyframe of the action is the length of time to the other MC 2.

  The Code

  mcButton.shakeButton.addEventListener (MouseEvent.CLICK, onClick);

  function onClick(event:MouseEvent):void {}

  gotoAndPlay ("shake");

  }

  What I found

  I searched the forum/web and in all cases that I met the problem above the toggle button is not the length of the visible button or other event listeners are in conflict with it. I don't know if one of them is my question. For 1 length of the frame of my button is so much time to the MC, which is the total length of the main timeline. If TI where a conflicting event listener to turn off that button should not play at all, because the event even listeners play before it than those who play after him. If I'm scratching my head for a direction.

  Are the 2 above known issues I found the problem that I have or do you know if it's something else?

  Thanks in advance!

  The second mc is nowhere in sight when this code runs within the Framework 1.  If the code for frame 1 is supposed to aim at the second mc to assign an event listener, it cannot.  Either the mc must be moved when the code is or the code should run when the mc is.  If you get no error messages, I have to wonder why.

  Functions and variables can be shared spread along a timeline in how you allocate this layer, but the code that runs, like play(), stop() etc, addEventListener() when you enter a frame, it happens that within this framework and does not extend to other images.

  What you can do, is have the second mc start frame 1 and make it invisible in this framework and then more later to frame 33 visible Tower.  Otherwise, you must have the event listener for the second mc code down into the fabric of 33.

• [Beginner] Start button run sub vi only once

  Hi, I am very confused by what it seems, very simple task.

  I have a piece of code and I need to connect it to 'start' button that will run once when the button is pressed, run once more, if I press the button again and so on.

  I tried with 'while' loop and true/false button connected to him, but, as you know, code inside the loop runs continuously as long it is true which is incorrect, it does not stop when it should.

  I woul hold it like this: press start-> code in the block runs once and that's it, no more unsless I press the new button...

  Please advice.

  PS: I have attached the vi piece I need to connect with button. He is currently working as intended but I can't seem to make it executable with button.

  An event loop is the way to go, but since you're a beginner. This is the Basic, simple way:

  

  You must click with the right button and change the mechanical action of lock when you press on (or exit) to run only once.  If you set it to spend it will switch.

• the event structure cannot combine with other events and run only once

  Why it will always get stuck when I combined the 'new user add' event to the event of 'Login '?

  It works for me when I separate the two, but the 'Add a new user' button can work but only once for the structure above, program will be blocked on the second time that I press the button "add a new user".

  

  It has already been said, you must use that a single structure of the event and not 2. Also, avoid using local variables (better store data in a shift register and not in an indicator) how you do it, it can cause bad racing conditions.

  Actually here you just don't another data storage since you have a file. Don't store data file to the root of the C drive, you do not have write permission. Use the default data folder or the folder of the application.

  I have attached a simple example. I guess that's a work at home? Please make my account help: try to understand why your VI does not work and try to find a solution by yourself. Modify my sample and play with him. This is how you learn LabVIEW. If something is not clear, post here, and we can explain/help.

  Edit: has the 'connection' event, I don't check against whether the file exists or not. Difficulty of this part, gives too little practice.

• Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thank you

  Hi, my videographer of windows program opens only once. It is impossible to reopen it unless I restart the pc. And then he does that only once and then comes the same problem. Thanks in advance

  Just a thought...

  It may be interesting to try to open Movie Maker and go to...
  Tools / Options / compatibility... tab and left click of the
  "Restore all defaults" button / OK.

• How can I get my mouse to grab things without having to click on the buttons, if I have the touch mouse on my laptop?

  How can I get my mouse to grab things without having to click on the buttons, if I have the touch mouse on my laptop?

  You will need to go to the control panel > hardware and sound > mouse and see if the settings for the mouse pad have a function called "Tap-to-click" or something similar in the description.  The exact name of this feature differs depending on the manufacturer of the software for the mouse.

  If you do not see this option to be available, you will have to probably go to the support site for the manufacturer of your PC and download the latest drivers for your model computer mouse pad and install.  Once installed, go back to the mouse settings in the Control Panel, where you will most likely available additional settings after the driver installed.  I hope that the "Tap-to-click" function will be available to turn on or off.