Recommendation on "inserts".

Similar Questions

• Qosmio G30 (PQG31) - problem with cloned hard drives

  Hi all!

  * Qosmio G30-154 * (* PQG31 *).

  Demo of the Qosmio has 2 hard drives with XP MCE (32 bit) installed on the primary.
  The RAID parameters are JBOD.
  BIOS is "newer" 3.90

  I would try to upgrade the drives (without installing any OS) and... have a problem!
  BSOD "Stop 0x0000007B" after 'clone with resizing' for the main HARD disk.

  I read on [drivers Toshiba RAID | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=48489] also [how to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm] and (or)
  [SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations | http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm], but I don't want to install OS, I want to keep intact my OS work.
  F6 (for all usb drivers) is not available to boot OS, sorry.

  "cloned" drive is in line with the correct name of made in the BIOS. "Cloned" secondary drive works (with old primary school). How to get access to the new primary OS and loading cloned? Please, any ideas?

  Thank you.

  Hello

  I think that the system cannot boot to the new HARD disk as the partition where the system is installed, was not marked as bootable system partition.

  I recommend to insert the previous HARD drive and to start the laptop.
  HARD drive new, cloned could be connected as an external HARD drive to a USB port.

  Then you should go to disk management (right click my computer - manage-> management-> disk management computer)
  Here you can see the HARD internal disk and the 2nd HARD drive connected to the USB port
  Right-click on the partition (2nd HARD drive) where the Win XP has been installed and choose the partition as the system partition and mark it as active.

  Then you could change the HARD drive again and could power the device in place. Usually, the system should boot to the top of the new marked system partition.

• Portege R600-13Z - Toshiba utility SMS - slow / stop when the SIM is in!

  Hello

  Portege R600-13Z running XP Pro.

  Recently updated the firmware and the Wireless Manager to try to get 3g / GPRS comms to work at all. Updated worked a treat and have now great comms.

  Utility of SMS does not work too well if. Very, very slow or crashes.

  Wierdness: out the SIM card to use the phone to send a few texts and with the SIM on SMS utility works very well (!) starts, allows composition, everything except the real /sending/ of the text, which is of course not possible because the SIM card is somewhere else.

  Anyone encountered this problem, and is there a solution?

  Thank you very much

  Evan

  null

  > took out the SIM card to use the phone to send a few texts and with the card SIM SMS utility works great
  If you noticed delays in using DMD utility only with the inserted SIM card?

  Hmm I m not very well why this happens, but I know it s not recommended to insert the SIM card if the system is already running.
  You must shut down the laptop, must insert the SIM card and then you should power the device in place.
  Then you could test this once more.

• Satellite L300 - perform a repair of Windows Vista installation

  Hello
  I have a Satellite L300. I have NO dvd of windows vista, the seller told me that the dvd of windows found in the pc.

  Now I have to solve a problem of windows update (80073712 - kb 971644) and in this link http://support.microsoft.com/kb/957310/en-us I do not know how to perform the steps in method 3, because I don't have a vista dvd.
  Can you help me???

  * Method 3: perform a repair of Windows Vista installation *.
  * When you perform a repair installation, it restores the current installation of Windows Vista to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows Vista.*

  * To perform a repair of Windows Vista installation, do the following: *.

  * Restart the computer
  * Insert the Windows Vista DVD in DVD of the computer dur.*

  * Note If Windows does not automatically detect the DVD, click Start, type : \setup.exe in the search box, and then click Configure in the list programs. Then, click install maintenant.*
  * Click go online to get the latest updates for installation (recommended). *
  * Insert the product key if you are prompted for it.*
  * Click to accept the Microsoft software license terms
  * On the type of installation you want screen, click Upgrade.*
  * When the installation is complete, restart the computer and try again to install updates again.*

  Hey,.

  I m a bit confused now
  What exactly happens on your laptop? You can start Windows?

  I think the article MS says it all: to repair Windows you need a disc of Microsoft Vista.

  Alternatives to reinstall the entire system use the Toshiba recovery disc that contains a picture of the factory settings. Have you created this disk?

• C50-A-19 t satellite does not start with the battery mounted

  OK, first post here.

  I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

  I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

  When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
  This worked well (I write him in this state right now).

  But whenever I put the battery and try again, it will fail in the same way.
  I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

  I have a few questions:

  (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

  (2) in any case, I want to solve the problem.
  If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

  Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
  If so, I'll just buy a. BUT...

  What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

  Any advice would be welcome.

  Thank you

  Mike

  Hello

  According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

  First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
  If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
  In case the battery is empty, the laptop will not light.

  I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

  You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

  In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
  If new battery does not solve the problem, s for laptop hardware needs an audit.

• 4630 Officemate HP all-in-one: //TODO complete installation without a CD player

  Hi all!  First of all, my operating system are not correctly identified because when I run winver, it lists all the choices given to me here.  It says Windows 8, version 6.3 (Build 9600).

  Okay, so my problem is that I bought the printer maybe a week ago, and I'm slowly getting used to him.  (still have not tried scanning anything yet)  It is printing very well, I had my first expedition of ink cartridges in the mail yesterday, it seems to be all good.  But tonight, a window appeared on my screen saying:

  "Your installation is not complete ."

  Insert the CD that came with this printer

  Windows Update has provided the easiest abilitues to use your new HP printer with this computer.

  You will not receive status messages, have access to the printer maintenance or receive updates if you do not complete the installation.

  In addition, the CD contains the installation guides that wil show you how to set up your printer.

  " Recommend that insert the CD supplied with this printer after you close this message to complete your installation and configuration, HP."

  I have added emphasis to the middle section since it seems terribly important.  Slight problem even though - this laptop is not a CD player.  So now what?

  Many many thanks for any help!

  EVER THE HELL HOLY SPIRIT!  It's the absolute = LAST product = - HP that I will never buy!  Not only since my support issue has been ignored for 2 or 3 weeks, but then today I spent 3 hours trying to get chat support and when I FINALLY got someone, he said Oh, 'Tis to technical support.  I do not answer your question of printer.  You want HP shopping.com. "What - obviously - turned out to be incorrect, so I thought I just seek an answer to the original question and go with it.  Yes Virginia, you can sign up for instant ink twice.  But watch out for the big, bad Monster Support HP.  I'm DONE with this thread.

  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(  :-(

• Transfer of the laptop to SD memory card

  I managed to transfer photos from my laptop on a SD card to view on a digital photo frame, but now I tried to do again the laptop is not recognizing even an SD card has been inserted.  How to recognize again?  Before it came automatically.

  It can be difficult to format it if you can't get your laptop to recognize the card. I would recommend you insert the card, and then click Start > run > type or paste devmgmt.msc . Look down the list of your USB controllers and develop the content. See if there is a yellow? or! mark. If he did there right click on the device that contains the brand and choose uninstall. Then, on the Tools menu, click Edit > search for new hardware.

• Windows boot manager / cannot start windows

  I currently have windows vista and at startup, I get the following message. Windows could not start. He recommended I insert the installation disc and restart my computer, but my computer (gateway) came with vista installed.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Read the above about gateway Recovery Options.

  See you soon.

  Mick Murphy - Microsoft partner

• Create jobs and positions via PL/SQL script

  Hi, it is recommended to insert new jobs and positions via PL/SQL Script?

  I know it's possible, I'm not sure if it is recommended. especially when it's via a direct insertion.

  Is there an API for it?

  I have about 200 + positions I need to set in our Instance of the EBS Test.

  Thank you!

  The APIs are the best way to do it in batches of charges-

  Job: HR_JOB_API

  Position: HR_POSITION_API

  To know that all the seeds API, add the responsibility of integrated SOA gateway

• VMs will be running not because of a poor estimate of CPU speed

  I recently installed the drive on a Windows 7 PC.  I can create virtual machines, but when I try to start them, I get the error:

  ASSERT d:/build/ob/bora-894247/bora/vmcore/vmx/main/timeTracker_user.c:232 bugNr = 148722

  followed by:

  Power error: cannot find a valid peers to connect to.

  During my research, I found 1227 KB which deals with this issue and recommend the insertion of three lines in the config.ini file.  In my config.ini file I've specified these values:

  host.cpukHz = "1900000".
  host.noTSC = 'TRUE '.
  ptsc.noTSC = 'TRUE '.

  I tried with just host.cpukHz setting at first, then added the other after that didn't work.  Also, I turned on sync time with host on all computers three virtual I created.  None of these things helped.

  I also found this post that refers to this problem being attributed to an incorrect estimate of the speed of the CPU.  I checked this on my system, and according to the host.maxKHzestimate.value registry value, my processor is estimated at 40,04 GHz.  (No, this isn't typo.)  Not coincidentally, I'm sure, the system in Windows screen shows the same incorrect reading.  I deleted these registry values several times and restarted the computer (and the player), but the estimate is always re-created to 40,04 GHz.

  The processor in this system is an Intel Core 2 Quad Q9400 @ 2 .66GHz, but I actually have underclocked to 1.9 GHz.  CPU - Z recognizes the speed correctly ~1.9GHz.  I have no idea whence the estimate of 40GHz.

  Just to be sure, this wasn't a problem with the virtual machines created on this system, I tried to copy a machine virtual work known from another system, but I get the same errors.

  It is a Windows 7 freshly installed PC - Player was one of the first pieces of software that I have loaded.

  Does anyone have any ideas on how I could get this thing working?

  It looks like a problem of security policy.  To apply the configuration options that you have added to the config.ini file, the user account must have the right to SeIncreaseWorkingSetPrivilege security.  Normally, this right is granted to all accounts default user.  If you are unable to grant this right to the user account for any reason, you should be able to set the configuration options in C:\Users\USERNAME\AppData\Roaming\VMware\config.ini instead.

• Where is an insertion mark in a game Score?

  Hi all

  In my note, I have 8 percussion in the arrange window. Later, I added a new instrument/track. To add a new instrument for a Score to set the manual recommends:

  Do one of the following:

  Set the insertion mark where you want to add a tool, then choose new > add an instrument.

  Where this insertion mark to show where to put, please? I select an instrument under which I want to introduce a new drum but after clicking Add Instrument input, the new inst appear on a button of the partition.

  Thanks in advance

  
  

  X there is no insertion mark. Adding a new instrument in through the drop down insert the next instrument as defined by the order of the tracks in the arrange window. What you do are framed an instrument, then right-click on it - and reassign the instrument you want. To change the order after all instruments have been added to the whole score - highlight the one you want to go - hit control c, the highest point, one that you want to insert above and press Ctrl v

• How can I insert a new blank page immediately after a proposed page

  I'm trying to change an iBook of 147 pages, and I want to add a new blank page immediately after page 73.  I tried ctrl-click on the page, but the new page is added at the end of the chapter, which is obviously not where I want to.

  Hello Jeff Reeves,.

  Thank you for using communities of Apple Support.

  From your post, I understand that you are not able to add a new page in the location you want to add. I know how it is important for your book or in the order that you want it to be in. Once you add the extra page will be able to do drag where you want to put it to you?

  I recommend to review the section in this article to add a new page.

  iBooks author: Add, reorganize, or delete pages, chapters, and sections

  Add a new page

  1. In the book pane (shown above), select the chapter or section to add pages to.

  2. Click Add page in the toolbar, and then choose Pages > Option.

  Tip: You can also add a new page by clicking on the order page in the book pane and choose Insert Page on the shortcut menu. The new page uses the default layout for the chapter or section.

  Reorganize the chapters or sections

  In the work pane, do one or both of the following:

  Change the order of the chapters: drag them.

  Change the order of the sections: drag an item to a new location in the chapter, or to another chapter.

  When the new page is added at the end of the chapter, see if you are able to drag to the location wished it to be in.

  See you soon

• Insert a picture from a file in the body of the message does not work after update to 24.6.0... ?

  Windows 7 Ultimate 64 Bit Machine
  All I get now is a framework with an icon "torn letter" at the top left of the image. I checked my settings... no joy. The cursor is too much to the right place. I've been inserting images without problem until today 11/06/2014 update @ 18:00 at the v24.6.0
  However, I am able to copy the image to the Clipboard in my graphics program and paste it into the message body at the level of the cursor without problem. Something happened because of this update. Love of Thunderbird... need this bad feature. Difficulty and or advise as soon as POSSIBLE please?

  Thank you.

  I answer myself. Despite the fact that I restarted Thunderbird twice as recommended, the problem continues as described. However, after making a stop with MS updates in the queue and them having been installed, the problem disappeared. Apparently, the start-up cold was part of the solution. Go figure. Any other experience never the initial problem as described?

  Ahh, I forgot... it is Windoze.

• HP Pavilion dv6000: ask an insert the HP Product Assistant Disk window whenever I start.

  I have started to repair Vista but decided that it was unnecessary and did not follow through with the help of the ERD.  Whenever I start, a window pops up telling me to insert the support HP disc in the CD drive. How can I stop it from appearing?

  Thanks to anyone who responds.

  Doug

  Hello

  Please follow the instructions.

  Honestly, I'm not 100% now, but we will test - it should be one of the following.

  Please, start new Autoruns (as admin). Be careful and find these entries - after uncheck them:

  + "HP Health Check Scheduler" "HP Health Check Scheduler" "Hewlett-Packard" "c:\program Hewlett-Packard HP health check\hphc_scheduler.exe" «2008-10-09 05:56 ' «»

  "HP Software Update", "Hewlett-Packard" "hpwuSchd Application" + "c:\program HP HP software update\hpwuschd2.exe" «27/04/2010 01:58 ' «»

  + "HP Digital Imaging Monitor.lnk" "HP Digital Imaging Monitor" "Hewlett-Packard Co." "c:\program Hewlett-Packard imaging\bin\hpqtra08.exe.

  + "Vongo Tray.lnk" "InstallShield" 'Macrovision Corporation' 'c:\windows\installer\{8c3ae2d1-854d-4650-a73d-c7cc7ee36b80}\newshortcut2_db7e00c96def489a8112d8f81614f45a.exe' «2007-01-19 23:15 "«»

  + "\HP" health check "HP Health Check Scheduler" "Hewlett-Packard" "c:\program Hewlett-Packard HP health check\hphc_scheduler.exe" «2008-10-09 05:56» "»"»

  + "\HPCeeScheduleForDouglas Depue" "CEEment", "Hewlett-Packard" "c:\program files\hewlett-packard\sdp\ceement\hpcee.exe" «23/03/2007 14:23 "»

  + "Com4QLBEx" "Com for application QLB" "Hewlett - Packard Development Company, L.P." "c:\program Hewlett-Packard HP quick launch buttons\com4qlbex.exe" «2010-01-12 07:53 ' «»

  One of them is probably related to the problem you see. Unchecking in Autoruns will prevent them from starting. Once you're ready, reboot your computer (restart, not stop and start again).   Please, report your findings, didn't this come back after that?

  Something unrelated to the original problem - I see that you have installed a software IOBit - these come with a very low reputation and the level of protection they offer is very low compared to competitive suppliers. In addition, they were taken to cheat and steal things propretiery by other sellers. Personally, I recommend you to uninstall them and replace them with something better like ESET, Kaspersky, etc...

• Camileo P30 does not work when the 8 GB SDHC card is inserted

  Hello
  I just got a new camcorder Camileo P30.
  I also bought a card 8 GB class SDHC 6 100 'Lexar Premium' x
  And it does not work with the card inserted.

  Here are the symptoms:
  (1) when the card is not inserted I can do everything OK - take pictures and video, use the menus, it turn on and off.
  (2) when the card is inserted, the following occurs:
  2.1) I can't take pictures or video - it does not meet the pressed buttons.
  2.2) I can't access menus.
  2.3) I can't shut off again.
  2.4) I do not identify the amount of memory is available (shows only 0 recording time remaining).
  (3) I have tried different combinations of:
  3.1) Insert the card so that the camera is turned off.
  3.2) Insert the card so that the camera is turned on
  3.3) Insert the card while the device is switched on and in one of the menus.
  (4) the camera doesn't always work if I take the card again.

  During these expriments (#3), I was sometimes able to get a record time correct left (#2.4), but still #2.1 to 2.3 # were a problem.
  At one point, I was also able to "format" the card and subsequently, he showed a record very long time available (not matching only not to the size of the map) and #2.1 to 2.3 # were still in force (i.e. I couldn't use the camera or turn it off).

  Note to work around the #2.3 I took the battery.

  I was not yet looking for updated firmware, or connect it to the PC.

  Has anyone of you has met with such a problem?
  What did you do to solve it?

  Thank you.

  Hello

  Have you tried another card SDHC?
  I m not very well what is happening here, but I recommend you another card in this camcorder.
  I m P30 not owner but I have a: 30 and the camcorder reads without problems for 16 GB SDHC card. It works perfectly.