Recommended architecture for a production installation of OBIEE 11 g

Similar Questions

• The installation source for this product is not available, ensure that the source exists and you can access (to remove Microsoft silverlight)

  I need to install Microsoft silverlight to watch films from netflix, but it is impossible to install it; but in my programs, I have microsoft silverlight (old), I think that if I remove the old program, the new microsoft silverlight will be possible to insall it. The problem is when I try to remove the old silverlight (add or remove programs) do not remove and displays this dialog box "the installation source for this product is not available. Verify that the source exists and that you can access. I like you would help me in this matter. Thank you very much. Manuel Ortega.

  Hello

  I recommend you to ask your question in the Microsoft's Silverlight Installation and Setup forum for better support.

• Uninstalling Silverlight gives "the installation source for this product is not available. Varify that the source exists and that you can access. »

  I can't remove Silverlight.

  I want to update to Silverlight. When I try to download, the download fails and I get a message to uninstall the old version.  When I try to do, I get a message that says "the installation source for this product is not available. Varify that the source exists and that you can access. »

  I have been in this situation and tried the solution here:

  "How to manually clean a broken Silverlight installation.

  Who has not completely worked for me, however, if I pulled upward from Regedit
  (Start-> Run-> 'Regedit')
  and searched the whole registry "Silverlight", deleting keys of parenthood which contain this string. (There was a large number of them).  When I did, I was finally able to reinstall Silverlight.

  Note that editing the registry is dangerous, so make sure that you first create a backup of the registry and know how to restore it in case things go very wrong.
  "How do back up and restore the registry in Windows XP"
    <>http://support.Microsoft.com/kb/322756 >

  HTH,
  JW

• The installation source for this product is not available. The product is Adobe Professional 8

  I can't remove Adobe Professional using Add/Remove programs. I get the following error message

  "The installation source for this product is not available. Verify that the source exists and you can access it.

  Try here: http://kb2.adobe.com/cps/400/kb400723.html

  John

• Problem uninstalling the program "installation source for this product is not available. Verify that the source exists and that you can access.

  OK, Windows Vista. Try to uninstall unused programs, (SimsLife) and met with the message: "the installation source for this product is not available.  Verify that the source exists and that you can access.  I'm trying to UNINSTALL a product that exists. How to find the source in order to uninstall the program?

  Hello

  Sometimes when you uninstall programs it may be other applications of the dependent files.  Some programs will leave them behind and others will take all during the uninstallation.

  Troubleshoot installing or uninstalling programs

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  Download the free version of CCleaner and use the uninstaller to uninstall the application

  http://www.Piriform.com/ccleaner/download

• Uninstalling Java problem: "the installation source for this product is not available. Make sure the source exsists and that you can access. »

  Hi, I'm having a little trouble trying to uninstall Java, so I can reinstall it. I get this error message:

  "The installation source for this product is not available. Make sure the source exsists and that you can access. "When I try to find the installation package to uninstall. I'm the only person on my laptop Windows Vista Ultimate, and I am the administrator on the computer. I can't find something when I search for it during the uninstallation. When I go on ' computer > disc Local (c) > Progam Files > Java' I see a whole bunch of files, but I can't find the installation package with the 'Installation .msi package' at the end. I find 'install.rdf '.

  I was wondering if anyone can help find me the source for Java, so I can uninstall and reinstall so my Java work properly.

  Java has been uninstalled before when Elluminate program my brother (online meetings of his school) and I guess when he was relocated something went wrong, but I have 2 Java programs. One by one by Sun Microsystems Inc. and Oracle and I am trying to install are Sun Microsystems Inc..

  Help, please!

  Corky (Corkster)

  Java issues are best handled by people in the Java forum:

  http://Java.com/en/download/help/index_installing.XML?user_os=Vista

  http://Java.com/en/download/help/index.XML For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Questions: Re-installation of Photoshop CS3, problem: "a license for this product has stopped working".

  My old computer has Photoshop CS3 (and Illustrator CS3) installed.  The old computer is dead. I did a Time Machine backup from another computer of backup", who had both of these installed applications.  (2 installs is allowed).  I have records of origin for both applications.  My new Mac lacks a DVD player.  So, I downloaded two applications from Adobe.  Photoshop: I launched the installer, & Photoshop CS3 is not installed.  Then I installed the Photoshop.  When Photoshop is launched, I got the dialog box: (((a license for this product has stopped working.  You cannot use this product at this time.  You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. ()) Adobe fails to phone support for CS3 products.

  How can I get Photoshop CS3 to work?  (And Illustrator CS3)

  Hello

  Please follow error: "License has stopped working". Mac OS

  Hope that helps!

  Kind regards

  Sheena

• I'm trying to reinstall Premiere Pro CS4 on Windows 7 Pro to a new setup file downloaded.  Layout Error 1612. The installation source for this product is not available

  I get an error of installation: Error 1612. The installation source for this product is not available. Verify that the source exists and that you can access. What is the solution?

  Hello

  This link might help: How do resolve error messages that occur when updating Adobe Acrobat or Reader for Windows

  Kind regards

  Sheena

• Photoshop CS6, need of qualifying previous product installation. Enter S/N for Photoshop CS5. System to say a product not qualifying. Stuck.

  Photoshop CS6, need of qualifying previous product installation. Found my S/Ns on the Adobe Web Site. Enter S/N for Photoshop CS5 fast screen. System is not a product calling. Stuck.

  When you start your cs6 ps installation, you will be asked the ps cs6 serial number.  After entering the who (and for failing to find a product calling installed), the installation program invites you to select a product calling.

  If it is ps 5, select it from the drop-down list and asked the ps cs5 serial number.

  Enter the correct number at the right time and proceed with the installation.

  If your eligible product is ps cs5, but ps cs5.1 or something else that exact correspondence indicated under your account, your qualifying product serial number will be refused.

• Installation of Photoshop CS4 error 6 of the license for this product has stopped working

  Installation of Photoshop CS4 error 6 of the license for this product has stopped working

  Hi Mela,

  Please try the below mentioned links

  MAC OS: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

  WINNER:http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html

  Thank you!

  Atul Saini

• Installation of OBIEE without using the remote control.

  Hello
  

  
  

  I installs le OBIEE et will use the Oracle database, but will not use the RCU. I wonder if I need of some pre -requisite to create the schema?

  
  Is there any documentation with installation create RCU schemas without?

  
  

  Thank you.
  

  Hello

  Without the remote control will not work OBIEE 11g because the remote control allows you to install certain patterns in a database that are required by median Fusion as Oracle BI EE ware products. These schemas can be installed on any certified version of database such as Oracle, Microsoft SQL Server, or IBM DB2 database. There are patterns that are required by the main components of Oracle Fusion Middleware, although there are Oracle BI EE patterns requires, as the Planner, BI Publisher, for the new product of the scorecard.

  Note: You can install it without the remote, but we must approach below.

  SATYA RANKI OBIEE REDDY SOLUTIONS: How to install OBIEE 11 g without the remote

  Thank you

  Satya Reddy Ranki

• CS6 upgrade returns: "this serial number is not for a product calling it".

  I have CS5 and have used it for about 2 years. The serial number for CS5 it is registered to my adobe id.

  So I decided to move to CS6 today. I registered so that my ID adobe as well.

  When I open CS6 and enter my new serial number, it tells me:

  Serial number you provided is valid, but calling it a product was not found on this computer

  Which is strange because CS5 is currently installed and running on this computer

  So he then invites me to choose a previous product I own and enter the serial number for this. So I select CS5 and enter the serial number for my CS5 license.

  However, he then said: "this serial number is not for a product calling." Please try another. "

  But he said not may all in detail below. Why is know not valid?

  Can you help me?

  Thank you!

  I understand John.  It was a rare event as usually the previous version serial number should be accepted.  That's why I recommend you to contact directly our support team in case of series available in respect of the account numbers cannot be used successfully.

  By contacting our support team directly at the Customer Contact then the exact serial number CS5 can be watched and specific corrective measures can be taken.  For example, if the serial number of the Creative Suite 5 is for a volume license then is refused by a retail installer even if there may be a way to upgrade valid.

• Installation with OBIEE 11 g problem

  Hi gurus,
  
  can you please provide me the steps for installation of OBIEE 11 g on linux platform. I have 2 servers one for informatica and dac and the 2nd Server for rcu, obiee, and weblogic.
  OBIEE and weblogic how can I start so first can I install obiee or weblogic or rcu first.
  
  Thank you
  RM

  More importantly do not install anything with the root user. First create a new user account. Use this account. Root user is NOT supported and will not properly work for all products weblogic, soa/bpm soa middleware, obiee etc.

  Yes or no. Create any directory as/Oracle/MiddlewareBI115 or whatever you want. Also you don't need not copy the installation of software programs to this place. At the time of installation that it you are prompted for the location of the directory use this location. See the note below. He said: enter the existing location or give any place name and it will create this file for you. There is therefore no need to create a directory in advance... Usually, I give as on windows C:\Oracle\Middleware115BI, instead of just of Middleware. In this way, I know from the outset, this folder is to have 115 version of BI. You can name anything.

  Yes. Its always good to create a totally different folder as/do1/software/and copy all the files of the software here. Now, come to 11.5 OBIEE installers, it comes in several zip files. You must download all the zip files. First unzip the zip of the files one at a time in the same place. After unpacking, you should see automatically bishiphome/Disk1, 2, 3, 4, 5 folders created. Of first Disk1 / folder, you run the Setup program

  There is no need to create such directory bishiphome/Disk1. After downloading the software say under/d01/software, in the present, you should see like big zip files 5 (Disk1 (2), Disk2 (2), Disk3 (1).) Departure from each zip file decompression in the same place or any place you want.

  I hope you saw the previous link already. There are different ways to install OBIEE with the same installer company. So keep the Installer files and Diskxx files unpacked. You can run them any time.

  If you are installing for the first time and if you are not very familiar with Weblogic Server, domains etc, I prefer going to install Simple approach. For this you must first have the Oracle database and run utility RCU to create schemas. Run the installer, and then select the simple installation option. It takes care of everything. He installed weblogic server, install software OBIEE in addition to this, create ready to use weblogic OBIEE field named bifoundation, create all the startup scripts, start the server. Under windows, it took about an hour. In the end, you'll see a working server. At the time of installation, it will ask you to middleware House. But the key is NOT installed with the root user. Create a new user and group. Login with this user and download all the software and install it.

  After doing some tests, you can always stop the servers. You can restart them whenever you want. From BI Server will begin field BI and also some BI processes (which are based on C +).

  Once you know, then you can try the other 2 options which are advanced and need some knowledge of weblogic server.
  1. these options, first must install the same version of Weblogic Server as WLS 10.3.5 incase of OBIEE 11.5 version.
  2. one of the solutions is to add one more extra server to an existing domain to obiee as for clustering.
  3. Another option is to install software just OBIEE on Weblogic Server. Then, you had to manually create a bi help Wizard Config domain. These two options needs a good understanding of deployments, objectives, Weblogic Server domain, servers, etc..

  The link in the previous post has all the details. I want to give you an overview of all the stuff.

  If you want to stop/start server bi at any time, see this post which is for the Windows operating system. But you can get similar folder structure on Linux OS and the equivalent commands. I installed under Windows. I haven't done on Linux, but guess that the steps should be in same to stop/start Linux.
  Re: Unable to connect to Analytics after restarting windows

  Thank you
  Ravi Jegga

• Installation of OBIEE 11G on AIX

  Hello
  
  I would like to install OBIEE 11 G on AIX platform, after going through the installation guide, it seems that for AIX, simple installation is not recommended / supported, so I have no other choice than to use a single installation software, which requires Weblogic Server pre-installed. I want know what is the minimum version of Weblogic server, which is a sine qua non for this installation, as we have already some version licenses of Weblogic server 10.3.x.x, which we would like to use.
  
  -Karine

  Hi Dominic,

  Looks like a Weblogic 10.3.3.x server should be sufficient;
  http://obibb.WordPress.com/2010/11/16/installing-Oracle-BI-11g-R1-Windows-Server-2008-R2-64bit/

  See you soon,.

  Daan Bakboord
  http://obibb.WordPress.com

• By connecting to Window Vista is errro ' configuration data for this product is damaged contact the support staff.

  1. I get this error before moving on to the windows vista login ' configuration data for this product is damaged contact the support staff "I tried repairing the system by using the Windows disk installation and chkdsk/f/r and none of the steps helped.
  2. on a different vista machine it keeps restarting on before we get to the opening of windows session, I managed to make system repair using the windows disc and he managed to survive but, unfortunately, after a couple of stop and restart, the same problem happens again.

  Kindly help on how I can make these problems disappear.

  Hello

  Method 1: Check to see if you can boot into safe mode. If you can start in safe mode, you can perform the clean boot and test functionality.

  Step 1: Check the functionality of the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine, you can check if the problem exists in a clean boot state.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: If you are unable to boot into safe mode, try to Start the computer using the disk and recovery options, select command prompt, run System File Checker tool.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Download link for the tool (SFC.exe) System File Checker.

  http://support.Microsoft.com/kb/929833

  I hope this helps!