Installation with OBIEE 11 g problem

Similar Questions

• Installation with WRT310N wireless router problem

  I have currently an old model WRT54G Router installed wireless that works very well, but I need the WPS technology if I want to install a newer model WRT310N router. I used the installation cd supplied with the router, which has not seen any problem until I removed the old router and plugged in power in the new after connecting the anc ethernet cables to my cable modem. For some reason any the software wont recognize the new router so I can continue with the configuration of the installation. Since I plugged the new router in the same connections that I had had the old LInksys router connected to, I do not understand why and I can not proceed with the installation. I finally just reinstalled... connected., my old router and it works fine, but this isn't a solution for me.

  It might have something to do with the sequence to connect the different cables? I also tried to use 192.168.1.1. via my browser and could up the installation screens but it wont let me install the new router so that the old one is still in place and without the old one in place, I can not access the configuration on my desktop screens.

  I have my router in a closet with my... cable modem... .but the WRT54G worked fine for 2 years in the same cupboard and I also installed a Netgear N600 router as an alternative. is it installed fine until what happened to the point where he said the beach was too limited. .i guess work in the closet.  I guess I can buy a range extender to solve this problem, but I have no experience with those so im not sure if this will solve the problem. I prefer to get the Linksys WRT310N to work if possible.

  Thanks for any help you can provide.

  Thanks for the tips on how to handle this. Fortunately, I discovered later that the Linksys router, I bought on ebay, is apparently defective and it now resides in my trash. That said, I also realized with the help of a neighbor that my Kindle works with the good old Linksys router I used for 4 years or more. My problem was to not understand how to download books on the Kindle, even though I thought I did. So the problem is moot. Sorry I got worth this site with no problem.

• HP Photosmart C7280 all in one installation with windows 8.1 problems

  Hello

  I have a HP Photosmart C7280 all in one printer which worked very well on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Subsequently the printer would not work and I got prompt/warning message to re - install the printer software. And I went to the control panel and deleted all the old HP software, tried to re - install the last being on the HP site... nothing will do.

  I tried to do a number of ways - manual download, download the HP software that determines what software is required, then it downloads for you...

  It seems to start unpacking all right, but then gets stuck on "Checking system" and never progresses to something else. Help!

  Hello Cam77,

  Welcome to the Forums of HP's Support. I see that you're having trouble installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.

  I have included the Windows 8: the progress bar on the Software Installation stops or stalls document. It will guide you in the steps to get the installed printer.

  Please let me know if you are having difficulties while doing the above. If you do, please let me know at what stage things are ugly and said error messages. Please also indicate how you have the connected printer (USB cable, ethernet or wireless). Thank you.

• Blue Snowball microphone installation with adobe first elements

  Blue Snowball microphone installation with adobe elements first problem - acts as the mute

  Hi William,.

  1 - is the mic function in other Audio capture programs?

  You can try to adjust the microphone as default and check if the problem persists.

  a. right click on the volume icon in the tray and then click "recording devices".

  b. make a right click on the empty spot in the window pop up, and select "Show disabled devices" and "show disconnected devices".

  c. right click on Microphone and then click 'enable '.

  d. highlight the microphone, then choose "Set as Default Device".

  e. click apply and then click ok.

  Hope this information is useful.

• problem with OBIEE 1.1.1.7

  I installed my new server linux with OBIEE 1.1.1.7. (my previous server was rather 1.1.1.6.8) and I copied my old catalogue, with analysis, dashboard, etc. on this new server.

  Now, if I try right-click on a table or a PivotTable, I can't see all the options in my context menu: I just "move to" and the label of the measure, but not 'show the subtotal', 'Create a group', 'Create calculated item', 'delete' or 'keep only '.

  If I try to change my analysis, in the results panel, I see all the menu items: but no, if I try to do the same thing from the published dashboard.

  Is there something that I missed during the installation of the new server?

  In my old server 1.1.1.6 the menu works fine.

  Any suggestion?

  Thank you

  Luke

  solved

  I miss also update instanceconfig.xml

• Javascript Visual Analyzer with OBIEE 12 c error

  I did a default installation of OBIE 12 c on Linux x 64 (centos 7.1) machine, it went very well I must say and I can use the product, but Visual Analyzer does not work.

  When I start a project, if the type of visualization is Table or PivotTable. I get the following error (when viewing types are of the charts that it works).

  Errors: Management PIF view html request failed. : Script error: ImportMeFirst

  http://requirejs.org/docs/errors.html#scripterror

  C@ http://EVS-r-ora08.BeBr.EVS.TV:9502/VA/API/v1/plugins/resource/Oracle-Jet/require.js:8:252

  ga/i.onScriptError @ http://EVS-r-ora08.BeBr.EVS.TV:9502/VA/API/v1/plugins/resource/Oracle-Jet/require.js:30:59

  With Chrome development tools, I see this additional information. If the error is in ojet.js on line 223

  http://requirejs.org/docs/errors.html#scripterror

  : Error Script: ImportMeFirst

  http://requirejs.org/docs/errors.html#scripterror

  the error (natively)

  c (http://evs-r-ora08.bebr.evs.tv:9502/va/api/v1/plugins/resource/oracle-jet/1.1.2.5814bf9/require.js:8:252)

  to HTMLScriptElement.i.onScriptError (http://evs-r-ora08.bebr.evs.tv:9502/va/api/v1/plugins/resource/oracle-jet/1.1.2.5814bf9/require.js:30:59)a.Logger._write ) @ ojet.js:223. Logger.Error @ ojet.js:221 (anonymous function) @ application.js:170 l ._publish @ thirdparty.js:296 l ._publish @ thirdparty.js:295 l .publish @ thirdparty.js:294 q .log @ application.js:174 q .error @ application.js:175 @ viz.js:157n.exec @ application.js:45 @ viz.js:160 @ require.js:8 q @ require.js:12 @ require.js:23 @ require.js:8v @ require.js:7Z.enable @ require.js:22Z.init @ require.js:17 @ require.js:26 (anonymous function) (anonymous function) (anonymous function) (anonymous function) (anonymous function) (anonymous function)

  ojet.js:223 obitech-reportservices/serverevents/Info: complete application: 41_0

  Other people have the same problem? Anyone know of a workaround?

  Thank you

  Stone

  Re-installed OBIEE 12 and problem disappeared. I think it was caused by a change of hostname after the installation of the product.

• HP LaserJet CM1415fnw: Complete Installation HP LaserJet CM1415fnw software problem

  Complete software will not install.

  Installation with Debug errors or cancel.  If I debug with Visual Studio 2015, this is the exception:

  System.TypeInitializationException was unhandled
  Message: An unhandled type "System.TypeInitializationException" exception occurred in hpbcsiCommonTools.dll
  Additional information: the initializer for type for 'Microsoft.Practices.EnterpriseLibrary.Logging.Logger' threw an exception.

  I would never create a package of bulk products with Enterprise Library.  It is asking trouble, especially on a developer machine.  I don't know that I have a package of Microsoft that uses a later version, or something screwing of the machine.config file.

  Hey @JWStevens,

  Welcome to the Forum from HP Support.

  I see that you are unable to install the drivers for your HP LaserJet Pro CM1415fnw Color MFP.  I would like to work with you on this.  I have some suggestions that could lead to a viable configuration.

  Try the following steps:

  Clear the Temp folder:

  1. Open the run box by pressing the Windows + R keys'.  In the box that opens type %temp% , and then press enter.
  2. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  3. Once everything is highlighted in the Temp folder select "delete" on your keyboard to delete the files in the Temp folder. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your computer, you'll be up the pop to 'jump' the item.
  4. Once the temporary files are deleted to close the window
  5. On your desktop, right click on the recycling bin and select empty recycling bin

  Then, run Microsoft Fix it.  Click here to install.  This utility could solve the problem of the installation.  I also suggest upgrading the firmware of the printer.  Connect your printer to your PC via usb (if possible), and then click here to complete the update of the firmware.

  If none of these steps help, you can do a selective startup upward on your PC working directly with MSCONFIG to try to determine what, if a Windows service or program is interfering with your ability to install the drivers.  Here's how:

  1. Click on the Start menu
  2. In the box "search programs and files" just above start, type msconfig and press enter on your keyboard
  3. When the System Configuration window opens, click on 'Selective startup' and uncheck Load Startup items
  4. Click on the tab Services , check the box at the bottom to hide all Microsoft Services
  5. Select disable all
  6. Select apply and OK
  7. Computer restart when prompted

  Once you restart, try the install again.  If you are able to complete the installation, we can assume there is a background program, or a service on your computer is blocking the installation. You will need to activate a service at the same time on your computer to find the program that is blocking your printer to print.

  Here's how to cancel the above MSCONFIG:

  1. Click the Start icon.
  2. In the box "search programs and files" just above start, type msconfig and press enter on your keyboard
  3. When the System Configuration window opens, click "Normal startup"
  4. Click apply and OK
  5. Computer restart as prompted.

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• LaserJet P1102w: Laserjet P1102w cannot activate the installation with Windows Vista 32 bit PC computer wireless

  Hello forum HP, I can use the Laserjet P1102w with USB connection on 3 different devices including a portable Apple and PC Windows Vista and Windows 7 laptop computer, but can not perform a wireless installation with the broadband internet connected wireless PC running Windows Vista 32 bit. The main message is that the computer does not find the printer even when using the USB connection. Any help would be appreciated.

  Hi @Kaiser3107,

  Welcome to the HP Support forum.

  I understand that you have a HP LaserJet Pro P1102w printer that connects three thin devices via the USB port, but you can not perform a wireless installation on a fourth device, equipped of Windows Vista 32-bit, because the PC does not detect the printer via the USB port. I would like to help with that.

  Here is a support document which includes 'USB device is not detected by Windows' which can help the issue of detection - Troubleshooting (Windows Vista) USB connections.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Aspire installation Ubuntu V3 - 772 g problem

  I recently bought an Aspire V3 - 772 g and I now want to install Ubuntu as second operating system. I've already replaced Win8 with Win7 and reconfigure the disk on the MBR instead of TPG to do and also disabled Secure Boot and switched to Legacy Boot.

  I had the image of Ubuntu 12.04 official website and created a Live USB Stick using Unetbootin. I installed Ubuntu with Win7 on my desktop already using this stick and had no problem with it.

  I can start my netbook with this stick and get into the menu where I can choose between installing Ubuntu, trying without installation, etc, but then the problems start. As soon as I press any key on the keyboard, the laptop freezes. The LED on the USB key stops flashing and remains lit permanently in place. When I left the countdown number down to zero, to make it use the default selection, a cursor flashing ("_") appears below, but other than that nothing happening (the USB LED also on stying apartment). In both cases, I have the laptop manually for use again at the stop.

  Anyone have any idea what the problem might be or suggestion/manual to install Ubuntu on Notepad using any other way?

  (I already consider switching to UEFI/GPT, but before I resort to such drastic methods I wanted to try to find something less scary)

  Apparently, the problem was really the unetbootin bootloader. I was able to install using the stick life of Rufus. Always had a small problem with a black screen (solved by 'nomodeset') and gparted/Ubuntu-install not seeing my existing partitions (because Windows is not able to convert correctly on the MBR... corrected through this), but now it seems to work smoothly.

• startuprepairV2 with signature of the problem 01: autofailover__

  I have windows vista. Do not start with repair unable to resolve the startup problem. PC just loop around Startup Repair continuously to try to restart again. System Restore does not work and "last good configuration does not work either. Gone through all the options available on the screen, without success, so now completely blocked. Vista installation disc supplied with the machine.
  The problem is listed as:

  Problem event name: startuprepairV2
  Signature of the problem 01: autofailover
  Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386
  03:6 problem signature
  Signature of the 04:1638424 problem
  Signature of the problem 05: no cause root
  Signature of the 06 problem: no cause root
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the 09 problem: System Restore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  locale ID: 1033

  Any ideas?

  How to do a startup repair disk:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• I used by mistake an MSDN installation with a regular windows key disk 7.

  I used by mistake a MSDN disc with a regular key of windows 7.  I then installed a lot of things.  Now, she's back with cannot activate siimilar due to not find a DNS server or something.  Is there a way to solve this problem with a normal installation disc and not lose all the work that went into my computer's configuration?  I now have a regular installation with two legitimate keys disc.

  Thank you

  Craig

  Which edition is on the sticker on the Dell? If the Windows 7 Professional, follow these steps:

  You can also try the following:

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  -----------------------

  Please note that using a KMS license, which requires that never where you install, there must be an Enterprise edition eligible installed Windows 7 (Windows XP Professional, Vista professional/Ultimate Edition or Windows 7 Professional/Ultimate Edition).

• BI publisher integrated with OBIEE?

  Dear Experts,

  
  

  
  

  
  

  oracle.xdo.servlet.security.AdminUser cannot be cast to oracle.xdo.servlet.security.DirectoryUser

  
  

  BI publisher integrated with OBIEE, but I use security as a guarantee of Bi Publisher.

  I created a role in the bi Publisher and trying to assign the report, but it shows the above mentioned error.

  Can use us the Editor while only integrated with OBIEE bi security?

  
  

  Thanks in advance!

  
  

  
  

  
  

  
  

  Hello Vinay,

  You can't use template security BI Publisher when the BEEP is integrated with OBIEE. You must use the Oracle Fusion Middleware security model in this case because OBIEE manages access. Security model BI Publisher can be used when you use a Simple installation, no installation of the company. To create the roles when you use Oracle Fusion Middleware I recommend you follow our manual steps: http://docs.oracle.com/cd/E28280_01/bi.1111/e22255/config_sec.htm#BIPAD132

  BR,

  Liviu

• Installation of OBIEE and OBI Apps 11.1.1.7

  Hello

  I am a DBA Apps and try to figure out how to do an installation of OBIEE and the OBIApps for 11.1.1.7(Informatica et DAC spécifiquement) on environment domestic. Can someone please help me understand this process. Oracle documentation is so confused right now.  I need to know how to install OBIEE first and then go back and install Apps or is it everything out of it, the documentation seems to separate everything, instead of putting them together. I'm very confused someone can you please point me in the right direction. I do this so that I can learn OBI, informatica and DAC.

  You must install OBIEE first as Setup of the olive TREE invites you to enter the details of the facilities of OBIEE such as BI-location, password weblogic, port etc.. With the installation of OBIEE in place, you will not be able to proceed with the installation of BI applications.

  Discover the guide mentioned as well.

  https://docs.Oracle.com/CD/E35287_01/BIA.7964/e35271.PDF

• Installation of OBIEE 11.1.1.7.1 & EMP 11.1.2.4 (Essbase, Planning, RA)

  Hello gurus,

  I need to install EMP 11.1.2.4 and OBIEE 11.1.1.7.1

  I want to use a big 1 server for all these installation. I would use the same instance of the WebLogic Server.

  Issues related to the:

  1. Is there a command that I should follow? First install EMP and OBIEE or vice-a-verse?
  2. UCR! Yet once related to the first question. I want to use the same instance of Weblogic server, which remote control to run first... ?? or can I run EMP and OBIEE UCR, one after the other and then continue with the rest of the installation?
  3. Is that what someone has tried the integration of the last EMP 11.1.2.4 with OBIEE (Comes with EMP 11.1.2.3 but I wanted to use 11.1.2.4)? Please let us know of your experiences... Should I keep in mind...?

  Best regards

  Aerts

  I would stick the documentation-

  "If you install on the same machine on which Oracle Business Intelligence Enterprise Edition or Oracle Publisher Business Intelligence are installed, install in two different houses of Middleware." Future patch sets for EPM system and Oracle BI EE will be released at different times, resulting in constraints for the upgrades of a fusion Fusion Middleware House. »

  See you soon

  John

  http://John-Goodwin.blogspot.com/