Recommended configuration for laptop

Similar Questions

• Recommended configuration for VCenter and SAN

  Hello

  I learn to vmware to some extent and have a question or a request for recommendation on vsphere configuration.  I have install vsphere on a phyiscal on w2k8 server that has the vclient and the vcenter server.  This server also manages the back-end by iSCSI storage.  There are two ESX host, connect to the network, each execution of a few guest computers w2k8, and I have a guest configure with a primary domain controller ADDS and another on the other host as a replica domain controller.

  Whenever my physical with vCenter server running on it gets the Windows updates, it asks me to restart.  This seems problematic, because I have to turn off all my virtual machines because they depend on the storage of the server that requires a reboot.

  I read that vCenter can live in a virtual machine as well, but it seems that it would make me a little further.

  Is there a better way to do it?  How can I keep my VMs running in order to update the storage server requires a reboot?

  Thank you very much!

  As long as the virtual machines stored the common storahe presented by windows server, you have to stop the virtual machines each time that you update the operating systems on the storage server - storage works fine your forces don't need update as often.

  I would recommend to move your VC serverto a separate machine either virtual or physical

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• HP 15ay007tx: windows installation 10 pro on hp 15ay007tx Free DOS configured for laptop

  Hello

  I created the bootable USB (windows 10) media and try to install windows 10 in my laptop (HPAY007tx),

  Here a few things I tried before coming here to help you,

  1. the start menu, the secure boot option is disabled by default - I can't change it

  2. it has the UEFI boot option, I activated the legacy and the EFI startup mode

  3 attempted to create the partition, it throws the following error,

  Windows cannot be installed to this disk. The selected disk is a MBR Partition table. On EFI systems, Windows cannot be installed to GPT.

  I had solved the problem,

  What has gone wrong?

  I used the boot media usb, in which I extracted and copied the contents of the iso image and tried to boot from it (the default usb file system is FAT32, which is not supported to install win10

  What I did to solve the problem?

  following this article that uses essentially refusals tool to create bootable ISO image, and then run f9 and bootable media selected as USB and that he have installed windows successfully.

• which operating system would you recommend better for hp laptop 14-D008AU? Window7 32/64-bit or windows 8 32/64 bit

  which operating system would you recommend better for hp laptop 14-D008AU? Window7 32/64-bit or windows 8 32/64 bit

  and what is the defferent from 32-bit and 64-bit

  Hello

  Please see this thread:
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/what-OS-support-HP-notebook-14-D008AU/m-p/4326752

  Kind regards

• Does anyone know if there is a way to define the layout of icons on the desktop when it is a 'bureau', then a different configuration for when it's a laptop?

  Original title: desktop themes?

  I use my cell phone as both a laptop and a "desktop"(connecter à un moniteur 24''). "»  Does anyone know if there is a way to define the layout of icons on the desktop when it is a 'bureau', then a different configuration for when it's a laptop?  I don't want to keep moving icons and I'm a little OCD about where they are.

  Hi MelissaES,

  You can follow these links & check if it helps.

  Set up multiple monitors

  Understanding multiple monitors

  Multiple monitors: frequently asked questions

  Hope the helps of information.
  Please post back and we do know.

• Replacing the WIFI card for laptop G72

  Hi all

  I think that I have given up trying to fix my current card WiFi RALINK RT3090 because for some reason any it simply stopped working since last Thursday.

  Am looking to buy a replacement one but don't know with all these terminologies

  The repair, I found the sub elements:

  -Atheros AR9285 802.11b/g/n WiFi adapter 1 1 x
  -Module WLAN 802.11b/g/n 1 x 2 Intel Centrino Wireless - N 1000
  -Realtek RTL8191SE 802.11b/g/n 1 x 1 WiFi adapter (for 1.0 and 1.1 only models)
  -Adapter of WiFi 802.11b/g/n 1 x 1 Broadcom 4313
  -4313 Broadcom 802.11b/g/n WiFi 1 x 1 and 2070 Bluetooth 2.1 + adapter Combo BDU (BT3.0 + HS ready) (for models 1.1 and 1.2 only)
  -802.11b/g/n Ralink RT3090BC4 1 x 1 WiFi and Bluetooth 2.1 + EDR Combo Adapter (BT3.0 + HS ready) (for models 1.1 and 1.2 only)

  All I'm looking for is something that connects with my router that is currently configured for 2.4 Ghz (can go up to 5 GHz but not looking for it) and get the best connectivity possible and if I choose to use my Smart TV with DLNA technology.

  Q1: Will all these above mentioned work card WLAN on my G72 (it is B02SA or B20SA) portable or can be picked up any other WLAN card (mini/low-profile if I'm not mistaken, that's what we call them)

  Q2: What is "for 1.0 and 1.1 only models"?

  Q3: Which of them will give me better speeds and possible connetivity?

  Q4: My previous card Ralink RT3090BC4 gave me several questions whenever I have to reinstall my OS so don't want the hassle

  Thanks to all in advance.

  souls33k3r wrote:
  Thanks a lot for the answer once for more erico.

  I'll keep your recommendation in mind.

  You would be so kind to answer my original question which will help me a lot

  Q1: Will all these above mentioned work card WLAN on my G72 (it is B02SA or B20SA) portable or can be picked up any other WLAN card (mini/low-profile if I'm not mistaken, that's what we call them). Check in the download section to check if the drivers are available. This nmeans that support BIOS is present.
  Q2: What is "for 1.0 and 1.1 only models"? It's information that can only be obtained at HP internally. It is likely to be market designations for models for the specific world regions. 
  Q3: Which of them will give me better speeds and possible connetivity? Module Intel uses the drivers Intel is more reliable.
  Q4: My previous card Ralink RT3090BC4 gave me several questions whenever I have to reinstall my OS so don't want the hassle. I also had problems with this module in the past. I prefer Intel and Realtek.

  You should consider browsing the forums on the sites of BIOS mod your laptop from warranty. There is a risk attached to the use of modded BIOS, you will have to accept. Modded BIOS files can remove blacklists of module.

• Recommended installation for the stability of the regions hot & warm even under Safari until Mac, cooling system is innovated. For a more Durable Mac

  Hello. It is best to combine a stable software (10.11.6 is stable to this day) and a cool hardware, even with Safari (with many tabs). A stable software is not enough, a cooled optimal equipment is also essential; It creates a stable holistic system.

  Until Apple, miniaturize perhaps, a sort of refrigeration in the circuits themselves (coolant will be not compact) due to the warming of the planet (some countries reaching a strong history of 46 to 65 degrees Celsius), cooling fan is not viable because it is so hot that he uses room air, regardless of how fast the fans spin (which would be just like a set of dry hair to the maximum) is not enough. An already hot air will get even hotter once Macs is used for long hours that could damage the GPU in particular, or perhaps even deform boards disconnect some circuits even or deform inside fleas which includes also circuits in them. Heat can also soften the welds in the Mac.

  It is recommended to run fans manually with a fan control application, even if the Mac is new (over the past six years the iMac I have had 2 replacements of GPU - this is most probably because of the heat and lack of ventilation in the Macs.) Apple may have more emphasis on function and either looks-it can't be 50-50. Replacement could cost if not for Apple Care which is good to have), if you are in an area that is warm or hot, at least 2000 rpm which seems to be a good balance between cooling and too much noise (it keeps the GPU minus 70 Celsius, especially). At 2000 rpm, the wear on the fans is not the only striking, it's usually only 47% of the maximum rpm of Apple fans (good fans are usually evaluated during maximum 5 years running 24/7 all year). But the best is to turn off all the gadgets to make noise to make the quiet place and adjust the fans (with a minimum of 2000 RPM) as quickly as possible without being noisy for the user. It is better to add extra cooling in the back (like a small electric fan or fans of cooling for laptops) for maximum stability if you're not in a cold air-conditioned room.

  It is good to reset PRAM then MSC after the fans and password recovery to use disk utility (two types of repair) manually before booting into your main operating system.

  God bless you. Revelation 21:4

  Directly from the plug of the iMac:

  Operating temperature: 50 ° to 95 ° F (10 ° to 35 ° C)

  If you try to work beyond these limits, good luck!

  There's this thing called 'air conditioners' cool the environment.

• Re: Brooded and configuration for Touchpad

  Win7 x 64
  L505 - 10 M

  It dishes all kinds of problems after an update of security windows for this system a few months ago.

  I put a backup of C:\ return, but various functions did not work.
  I have most of them are still working today. I installed Flashcard again but configuration for touch pad and display are still missing.
  Mouse drivers are HID-mouse PS/2 version: 6.1.7600.16385 Microsoft.
  I downloaded path touch driver - 20091202155841.zip, but it cannot be installed.
  C: \Program Line\TOSHIBA\Bulletin Council is present but likely damaged and not present in Windows Start-menu\Toshiba.
  How can I fix this?

  arnold12

  It is pretty damn good on your laptop.
  Is installation of recovery for you solution?

  I mean, after the new installation of the OS, everything will be OK again.

  All you need to do is to backup all your data and start the installation of the HARD disk.

• PIXMA PRO 10 can not configure for WiFi

  Everything works fine on USB key, but I can't seem to configure for WiFI. I am using the recommended network driver

  MP68-victory-mg3200-1_02 - ejs.exe

  but for some reason some it does not detect the network. I use Xfinity and have the router SMCD3GNV. I have a printer HP on WiFi but no luck with this one. I don't have the original CD that came with it I bought it used and the seller couldn't find. Is there a better network driver? Thanks, Jim

  Hi, Jim!

  Thanks for posting on our forum! This community is designed for Canon owners your colleagues help each other any problem they may encounter. If it is a question of time-sensitive, contact our technical support team at the United States is the most effective way to get these issues straightened. They are standing, ready to help you 24/7 by Email http://bit.ly/Canon-Support or by phone at 1-800-OK-CANON (1-800-652-2666) Monday to Friday between 10:00 and 10: 00, et (07:00 to 19:00 PT).

  Thank you and have a great day!

• Try to connect to the network, get a msg "the server is not configured for transactions.

  I have a desktop running Vista Professional (SP2) and a laptop running XP Professional (SP3). They are connected by a WiFi network, the Desktp acting as a server. Everything worked well until the Office had a problem and had to have re-installed Windows. Now, although the Office can find the laptop, the laptop can not find the office or its working group. I get a message " is not accessible. You might not have permission to use this network resource. Contact the server administrator to find out if you have access permissions. The server is not configured for transactions. »

  • But once, for about five minutes, it worked - and then stopped again. For no apparent reason.
  • If I connect with an Ethernet cable and no WiFi machines, the last sentence of this message changes to "the list of servers of this working group is currently unavailable."
  • When you run the Configuration Wizard from the network on the laptop, he told me that I have to run the Wizard "on each of the computers on your network. To run the wizard on computers running XP, you can use the Windows XP CD or a network setup disk". I was not able to do so - the XP disc I have does not behave as indicated by the wizard and the wizard does not recognize my CD - RW drive to create a network setup disk.

  Can anyone help?

  Well, who has not responded to my problem, but it was eventually fixed by a support guy with the company who sold me the desktop PC. As I understand it, it was a problem of file sharing. Seems he had to undo sharing all my records on the desktop, then re - share once again, since when I did not have this particular problem. But it's obviously not ideal (in MS eyes at least) to the network of computers with different operating systems.

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• Configuration for E4200 suggestions

  I just bought a refurbed E4200 and run the configuration wizard.  It works fine but I know there are always better configurations and settings.

  I'm out of the static IP for my devices, but don't know enough about this router beyond that.

  I have an XBOX with XBOX LIVE, PS3 PlayStation Network, but also a gaming PC.  They are all wired.

  Wireless, we have a few desktop computers and laptops.

  My previous router was a D - Link DGL 4500 and it was a great router, but has not had the MIMO or punch wireless that it is.  I really like this E4200.  Anyway, the DGL4500 forum was the best stickies, I have ever seen regarding the configuration for the games.  Does anyone know of another forum that may have a similar one sticky for configuration or can someone suggest what works for them?

  "Tweaks" are generally to solve gambling problems. I don't really think tweaking everything that would make a real difference for you. Just don't use Qos on the router again because it does not correctly detect the speed upload and Linksys leans on this.

  If you have a DSL modem, then put it in Bridge mode and use the PPPoE rather than DHCP in the router Web page. If you have cable or fiber then I would think UPnP would be the only thing needed to enjoy the game smoothly.

  If you are having problems then that is when port forwarding/triggering, dmz, etc. come into play. Another that I have not really seen all the articles on how to optimize the gameplay. Having enough bandwidth in combination with low jitter and latency is what counts. Maybe when they solve Qos problem, then you can try it if you have problems of upstream bandwidth.

  Also make sure you have the latest firmware. Here (v1.0.02). I was checking the Dlink forums and all they did was open (done automatically UPnP) ports and prioritize the traffic (Qos). But as I said, do not use until Linksys Qos solves the problem because it will considerably cut down your download speed.

• Converter for laptop

  I have a laptop HP pavilion dv4-1145go and I would use it in the car on a camping trip.  I read online that I should use a converter pure sine to convert dc to ac. I called my local electronics store, and they told me that this filter is built into the power adapter to the pc, so I really didn't need the pure sine wave inverter.  Do I need converter pure sine (cheapest is about $100)?  Also, how much power to I need to run this laptop?  How much is too much?  Thank you...

  Glad I could help...

  As I said I've been using inverters to power when on employment in construction and while camping for quite awhile.  Have not been able to get camping for awhile, but had developed an interesting configuration for our favorite campground.

  picture a canyon of the small box that opens on a lake and is about 80 feet deep and 150 feet in diameter from the open end.  We strings of nylon thread 1/4 inch on the top of the canyon and then use it to shoot and support "zip" (like a lamp cable) cord through the canyon. On this zip line we placed shells.  These are very similar to what serve many Christmas tree. They clip on the line and Pierce the insulation to reach the electrical conductors without having to the Strip or cut the line. On these outlets would put us 14w fluorescent bulbs compact and reflectors facing down we have obtained elsewhere.

  So as you can see, the installation program only has attracted about 60w but lit the area very well and had the additional advantage of attracting insects on the lights that were well above our heads.

  It's just something to keep in mind for you...   Even 1 fire pulled up in a tree can give a general lighting for an area and prevent people from stumble in the dark and help attract insects away...

  Yes, a converter DC-AC 120w will probably run for you.  But in my experience less than 200w inverters are very cheap. The few dollars you save will be spent again when this UPS dies before she really should.

  My advice would be to get a 400w inverter as I've described. Check the box to be sure, it comes with the adapter and clips. You can use the lighter in the car where you run the laptop or DVD player and still be well under the limit of 20A of this socket.

  'Better' inverters most have a protection mode to not drain the battery of the car down too far. Black & Decker, we're going to make a noise, others might just stop. When you hear the adutiable go alarm and start the car right away. Alarms are not as accurate as we could hope, and also depend on the status of your battery (what age there).

  I know, it looks like I give a lot of warnings and a lot of different things to remember, but don't worry. Once you know the limits of your own decision-making power base and keep in you mind will be fine.   Especial en route to your destination.

  One last thing.  I would advise that run you to the auto parts store before you go and pick up a box of fuses. For the type of your car uses to protect the lighter plug and for the type of the inverter to the inside of the plug that goes into the lighter. Unscrew the metal of the cigarette lighter to reveal this fuse and get plug end of identical spare parts.

• Change STP UME in RSTP mode on two stacked powerconnect 6224 configured for iSCSI during normal operation

  Hello

  I'll do a fw upgrade during normal operation on a stack of 6224 circulating BPMH, I am currently aware of recommendations Dells run RSTP on switches configured for iSCSI traffic connected to Equallogic SAN.

  I intend to set up another pile with two 6224 to failover and then perform the upgrade on the stack of "old." My question is if it's possible to run BPMH on the 'old' stack RSTP executing on the new stack when LAG is configured between the two batteries?

  Another option would be if it is possible to reconfigure the 'old' UME to RSTP stack without interruption between the hosts and the SAN first?

  Guidance on this subject would be greatly appreciated

  Cree

  Multiple Spanning Tree Protocol is based on RSTP and is backward compatible with

  RSTP and STP. So, you should be able to run BPMH on the old and RSTP on the new.

• Recommended configuration of WLC 2504 SSID with AD

  Hello

  I would ask, what oyou d think that is now the best practices and recommended solution how to configure SSDID on 2504 WLC for the following scenario. I'm new to WLC and would like to secure network.

  -any type of customer must be supported (08/07/10 win, mac, linux, iOS, android, windows mobile)

  -authentication on Win 2012 R2 NPS as RADIUS

  -any requirement of certificate client (we don't want PKI configuration for now), we want to just WLC certificate as an authentication point

  is enough [WPA2] [Auth (802. 1 X + CCKM)] who will have radius configured?

  Thank you

  Well Yes, check these

  http://www.Cisco.com/c/en/us/support/docs/wireless-mobility/WLAN-Securit...

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/4-2/configurati...

  Eat local point concerns small size as a small office deployments.