Reconstruction of liquefy tool returns all even the frozen areas.

Similar Questions

• Everything opens as a program? Even the icons are switched to it?

  Okay, so I tried to download something, but he said he could not open unless I gave her a program to open it with. It turned out that everything now opens with windows media, because that's what I clicked. Even the icons are switched to windows media. I tried http://support.microsoft.com/kb/950505 but towards the end when I type in the reg import thing it tells me "error opening the file. There may be a disk or file system error. No, I have not either a disc on my computer, I run a windows 7 too. Please help ASAP

  I've seen this happen when opening a program via a shortcut (for example. LNK file), you are asked what type of program to open it with. After selecting the Windows Media Player (or another program) via the Select a program from a list of programs installedand check always use the selected program to open this type of file (circled in red below), the document or program referenced by the shortcut of origin opens in Windows Media Player as it should.

  

  The problem is that now all shortcuts (for example. LNK files) on the desktop or in the Explorer will want to be opened by Windows Media Player and use the icon of Windows Media Player to display the shortcut bit whatever the shortcut was originally intentioned to open. This is known as a file association and the default icon. The same condition can occur if you have performed these actions 'Open with' on one. JPG or even a. EXE, but the. LNK explanation is much more likely for the items on the desktop; especially if all the icons have changed as well.

  The good news is that a small free utility was written to cancel the. LNK file association was created. There is also a registry hack to achieve, but I recommend the utility unAssoc for its ease of use. I used to send people on another site to download this utility, but this site has become confused with all the ads and fake download links. I put a copy on my own OneDrive here.

  

  Just download, then use the utility to unassociate the. LNK files for the user or globally delete the file type and let windows rebuild a new default.

  UnAssoc file utility Association

• Update fail, have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading.

  I have Windows XP Home Edition Version 2002 Service Pack 3.  I have 3 updates that load, but then the icon appears again advise that even the dates are ready for loading.  Is it possible that updates sent me are for the 2003 Version?  Whenever I update these 3 updates, a window shows updated loading successfully, but they still remain as an icon in my taskbar?

  CrystalBall © SEZ...

  See the RESPONSE message in this thread-online http://answers.microsoft.com/thread/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• When you use the tool of cash withdrawal, the sampled area does not appear.  I remember seeing this before - I've already had the updates of my LR5

  When you use the tool of cash withdrawal, the sampled area does not appear.  I remember seeing this before - I've already had the updates of my LR5

  Is - this balance?

  Press H.

• void vi returns all of the elements

  Basically, my sub vi returns only a single value for each iteration of the loop.  I read 10 samples at a time, then I lose 9.

  I thought to build a table, the vi sub running in a loop with automatic indexing.  the problem with this is that it only returns the last value, except if I build an array out of the loop.  downstream, I double sinks, so I can't connect the table.  Is there a way to convert the table 1 d in the flow of 10 items, so that simple math corrections can be performed downstream?  Is there another solution to make the sub vi return all ten samples?

  
  

• Returns all of the rows matched and unmatched table

  Hello:
  I have a table that have senders A, B and D. This is my script that returns all the shippers have those amounts:
  
  Select sender,
  flat amount
  from TABLE1
  where the sender in ('A', ' B', 'C', ' d ', 'E')
  Group by sender
  order of the sender
  
  Amount of the sender
  -------------------------
  A 10
  B 40
  D 50
  
  But I need the output as below:
  
  Amount of the sender
  -------------------------
  A 10
  B 40
  A r
  D 50
  E 0
  
  Can someone help me?
  
  Thanks for advance/Razin

  Hi, Razin,

  Outer join a table (or, as in the example below, as a result set) which contains a line for each sender you want displayed to your actual table, like this:

  WITH     all_senders     AS
  (
       SELECT  'A' AS sender  FROM dual  UNION ALL
       SELECT  'B'                FROM dual  UNION ALL
       SELECT  'C'                FROM dual  UNION ALL
       SELECT  'D'                FROM dual  UNION ALL
       SELECT  'E'                FROM dual
  )
  SELECT       a.sender
  ,       NVL ( SUM (t.amount)
             , 0
             )               AS total_amount
  FROM                 all_senders  a
  LEFT OUTER JOIN      table1           t  ON   a.sender  = t.sender
  GROUP BY  a.sender
  ;
  

  If you would care to post CREATE TABLE and INSERT statements for your sample data, and then I could test this.

  You already have a lookup table that contains one row for each possible sender. If so, you can use it instead of the above subquery. (If you do not already have such a table, think about creating one).

• On XP and FF 5.0.1, but NONE of the graphics on a Web site are visible. Even the ICONS are blank. Help, please!

  This has occurred since the new version of Yahoo mail is acting funny in IE8. It works fine in Mozilla, with the exception of the graphics issue. And if I go to all the other sites (not just yahoo), they all have similar problems.

  Is he missing pictures then make sure you are not block images from certain domains.
  See:

  • http://KB.mozillazine.org/Images_or_animations_do_not_load
  • Check the permissions for the domain in the active tab in tools > Page Info > permissions
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in tools > Options > content: Load Images > Exceptions
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Virtually all of the files are missing after you import the catalog.

  I'm NOT sure that has nothing to do with lightroom, except that yesterday my files were all there, now, they are absent.  It could be a hard disk failure.  Its just strange that it affected only the files that I tried to interfere in my lightroom catalog today.

  Well as out of town, I pulled a few thousand photos and them ingested on a daily basis in a new lightroom catalog that I created on my laptop.  Files imported into a USB external drive.  The laptop is win 10.  It is on the latest version of lightroom, CC.  Yesterday, everything was going well with the catalog, disk, and files.  All were there.  The catalogue and the photos were on the same drive.  The laptop was listed as the letter 'g ':

  Once I went back to the office today, I wanted to import pictures to my largest catalog on my desktop.  I have used this external hard drive for all my new photos in 2016.  On this PC, Win 10, the letter of the external drive is also "X:".  I started lightroom in my big catalogue very well.  I chose to import from a different catalog, accessed my X Catalogue outside in the car and started importing without a copy of the files.  This should leave the files in the same location.  It took a little more time I expected to import this catalog.  When I went to the structure of folders inside lightroom, it seemed that all the files have been imported correctly.  But there was a "?" from the folder.  I assumed that I just needed to do a "find" on the X drive as I thought that my lightroom catalog could have been pointing to the G drive.  Locate, but cannot find the files.  I've used windows explore to browse my files and the folders and files were all missing, with the exception of a folder where I shot some photos with a camera, about 100 photos in all.  Thousands of photos from other cameras were all absent.

  So next time, I ran a scan disk and windows came with a message of repair.  The repair said that it worked successfully.  But I looked in the Explorer, the files were still missing.  I ran a scan disk again and no error found.

  I looked in the trash on the desktop and there is no files on this disc.  If the missing files are still missing.  I had not saved the files yet since they were really vacation photos and have no critical and since I was going to save them after that I spent in review on the workstation.  Some are still on the cards and could be retrieved.  But I formatted my main map at least a couple of times and I'm afraid that most would have been crushed and is more viable, even using the card recovery software.

  Before you begin importing today, I don't check the disk to make sure that all my files were there.  There is no error in windows at startup and I don't mind just to check in Explorer or open the 'new' catalog first.

  1. Could Lightroom have somehow deleted files and can they be retrieved?
  2. Assuming that it was a Windows / hard drive error, can anyone recommend a program attempt to recover files lost like that?  Given that the entire folders, sound also lack if the index of the obtained partially erased disc.  But maybe the files are still there.  Then there is a program to search for them?

  Note that the other files on this drive all seem to be good.  The only missing are import of today.

  It is drive X:, but the files are not there.
  portable version is 2015.6

  Desktop version is 2015.5

  The

  Somehow, the windows removed them.  I use EaseUS data recovery to retrieve them.  He had no problem finding the files.  So I guess we can mark this resolved.

  Thank you.

• Remove/heal spot LR 5 tool does not show the selected area

  A week back, I installed LR 5 on my MBP 15 inch retina. My laptop has a great hardware to run LR5. The problem I encountered was with the remove spot/heal tool. It goes as below.

  I selected the Spot removal tool and set the mode to HEAL and then selected a box on my image. In many tutorials, I have seen that the selected area appears as a circle with white border with an arrow pointing to another circle. But in my case, its invisible all. Same problem happened when I selected CLONE mode. I am attaching a video to illustrate the issue.

  Could someone help me understand what is happening? I'm new to LR, but I like the software and want to invest time and money in it. However, these questions, I am little panic and do not know if this software is value of these investments.

  Thanks to you all.

  -NN

  Have you tried the 'H' to hide pin key?

• Fire Fox no longer applies my UN and PW when I opened a site. The function is not enabled. All of the PS are still show in tools, options.

  I have several sites that have user names and passwords assigned and recorded in tools, options. Fire Fox no longer applies these when I opened the site. When I look in tools, options of the "Remember passwords for sites" is not enabled. How can I enable this feature.

  This happened after a fight with some malware in a program called torch.

  See:

  • Firefox > Preferences > privacy > Firefox will be: "use the custom settings for history".
  • Uncheck the box: [] "always use the navigation mode private.

• Almost all of the Podcasts are deleted

  Hello

  Last night all my podcasts has been deleted in a mystical way.

  I think it has to do with my Itunes on my work with windows pc.

  All the podcast (about 30-40) has removed two excepted.

  I could add all the podcast of 30-40 (if I remember them all)

  but prefer to see if I could open the ITL file see what podcast that I had and add them again.

  IPhone, ipad and its cloudsync removed for the gain or loss in my case this time.

  Anyone has an idea how to import or return once again my podcast?

  IM at work atm so a solution for Windows is preferred now ;-)

  ITunes for Windows 12.4.2.4 on Windows 10 (playing at work podcast)

  Without knowing more, I suspect an involuntary intervention of settings on various devices and the ability to sync the podcast settings.

  As long as the podcast files are always in your media file, or you can restore from a backup, you can add files to the library. If iTunes does not automatically recognize as podcasts, you can change the media type. See, however, first Re: why has he deleted iTunes 11.1 (126) all (SEVERAL HUNDREDS) Podcasts? and this post later in the same thread that mentions a file recovery possible of tools that might be able to recover some lost files if you don't have them elsewhere. If the lost episodes are on a device Apple see recover your iTunes from your iPod or an iOS device. You need to make sure that your settings are such that iTunes will not unexpectedly wipe new episodes.

  You can not inspect the .itl file, but you can try to access the version before the library in the previous iTunes libraries folder updated, however don't do this if there is a risk of podcast settings updated again until you've got backups of all files.

  See also:

  Empty/corrupted library iTunes after upgrade/crash

  Back up your iTunes for Windows with SyncToy library

  Make a portable split library

  TT2

• The folder "inbox" for one of my email accounts where does not appear on the screen, but all of the messages are there, and I can click on each one to see...

  I've seen other people having this problem too and their problem solved by using the link "file repair". I tried this also - no effect...

  It seems to be a pure display problem, as all emails are there, and when I click on a specific location where a specific e-mail was supposed to appear, I can open the e-mail OK. I have no insight of what is in my Inbox. When I keep my mouse on the account of the column in the left window, a little black watch too, with all the new messages being listed.

  I don't have this problem with one of my email accounts has seven. All the others work fine, and this is also several weeks until what stopped it a few days ago.

  Restarting the computer does not help.

  I use Ubuntu 14.04 as the operating system.

  Try this:

  Select the Inbox that shows an invisible list.
  Click the icon of choice of right column header and select 'Reset columns by default'.

  It worked?

• I just open youtube on my ipad3 and he bugged and I was landed on the home screen with all the app folders disappeared when I go to setting that all of the apps are there, how do I solve this problem?

  Hello guys, I have a 32 GB IPad 3 with an operating system of ios 9.2.1 this problem has never happened before and what happened, it's just a normal day and the iPad was running smooth as always until there was suddenly a notification when I opened my iPad from YouTube, so I opened it and all of a sudden when I opened the application crashed and I was on the home screen and all records have were missing, though safari and app store were in a folder so they disappeared in Buthan, I went to the settings and all applications have plaseeeeeeee someone tell me how to solve this problem

  Try to keep the sleep/wake and the "home" button until the Apple logo appears. -AJ

• Dv6000 lights at all, fan sounds not at all but the lights are on.

  I had the original problem was,... the DV6000 was having a difficult time starting at the top, you need to restart several times before it starts up and displays the HP icon, and continues with the startup process

  When I turn it on before, it just to hear the fan and turn on the LED lights for a minute, then shuts... I have to make a few attempts to start successfully.

  Now, a few days ago I tried to turn it on... the thing, it's the fan doesn't sound at all, so basically I waited and did stop light thing again, several times... many times, but nothing never happened...

  I'm sure that's not coz of RAM, two of them work when transferred to another (thus DV6000) laptop...

  Absolutely not the HARD drive because it works with the other DV6000

  I am that he is pointing to the BIOS.  I don't know what to do.

  BTW, I was done with the Hard reset and the commune on workarounds phone but nothing helped...

  

  

  Of Cisco Philippines with love_ _

  * I am not employed by HP, but I'll be happy to know that could I have helped *.

  

  Hi rjose_selena,

  Sorry to hear that it didn't work. Updates to the BIOS, I see there is one on HP.com, however it must be run from Windows, so if the computer is not started, you won't be able to run it.

  I have not done this with a laptop before, but with the desktop computers, motherboards have a "jumper reset" - it covers usually 2 pins (on a line of 3 pins). In desktops, move you this jumper to cover the other two pins (so if it is on pins 1 & 2, moves to 2 & 3) then power on. If it was me, and I was out of warranty, I would give this a try.

  You could also locate the CMOS battery (it looks like a watch battery, usually about the size of a nickel). If you remove it and press and hold power for 10 to 30 seconds, then reinsert the battery, it must clear the CMOS on the motherboard.

  Replacing the motherboard on a laptop can be tricky, but it can be done - I recommend you find some walkthroughs in line (if available) or any documentation you can before attempting this, if you decide to do.

  Hope this helps

• Help, please! My home page and then all of the pages are now shared with a sign on the left [about 1/6 of the screen] with a previous page. How can I go back to regular tabs?

  Sorry, I'm not able to provide more details. I don't know how it happened, but I really don't like.

  Thanks much jscher2000! This sidebar has been driving me crazy for a long time. With your guidance, it took 2 seconds to solve my problem.
  So glad there are people out there to help.