Record of long-term key error

Similar Questions

• Error registerting long-term key

  Anyone know what this message means?  I can't find a good explanation for it, even if I'm confused by the .apk any conversion .bar right now.

  Record of long-term key error
  Error: Error: unable to register the client '2024152' because there is no more the record attempts.  If you are already registered with this server, you must restore your backup signing keys.  If you do not have a backup of the key, then you can order a new set of keys at www.blackberry.com/go/codesigning

  I am trying to convert an application I developed in Android for my z10 and it's the last issue, I'll have.  The above message appears when I try to submit registration of the signature of the BlackBerry deployment configuration wizard in Eclipse.

  Hello

  This message means that you have not any attempt to register more to your old signature keys. Now you can either restore a backup of your signing keys or move with the new id based blackberry signing process (see http://devblog.blackberry.com/2013/08/code-signing-keys-be-gone-welcome-blackberry-id/)

  Take a look at your c:\Users\%USERNAME%\AppData\Local\Research Motion\ directory. Here you have the following three files: author.p12, barsigner.csk, barsigner.db?

  If these are missing, you must restore a backup to this place.

• A USB at low prices is not acceptable for long-term backup storage?

  I'm close to the graduation of my night school. Subsequently, I plan to upgrade my MCSA & MCDST MCITP and MCTS certifications. I use the ability to download all the stuff of Dreamspark while I still qualify so I'll still have access to the server.

  I would normally just burn these images on cd/DVD, but with virtual machines, it is generally easier to use the .iso images. I need a way to save as well as (stored in .txt files) product keys. I'm looking for the cheapest possible solution.

  Buy a USB hard drive for $50 at a "back-to-school" sales stories Office Supply would be viable for the long term storage? Those who are not really designed to be WORMs where I write once, and then paste it in a safe place with my original disks/CD/DVD (all since 1989) until I have more software to back up.

  In my opinion, a backup tape would be too expensive for my needs, flash drives large size are also expensive, DVD are too small or silly to burn a DVD with a single. ISO image.

  So buying an external hard drive seems the cheapest solution, but how that will hold up over time? I think it is bad that the reader will be much used and rest in a unique, rather than be spun position regularly.

  Don't forget that "backup" deduced it is a * second * copy data - not your original copy (only).

  He'll resist quite well - as long as it is not being abused.  Sitting didn't seem to affect one of the readers that I have 5 + years.  Plugged in recently when I found it.  It was one of them:
  http://reviews.CNET.com/external-hard-drives/Ximeta-NetDisk-80GB/4505-3190_7-30734045.html

  Yes - I got when it first came out.  Seems small now - I have an eSATA/USB 64 GB flash drive that holds 64GB.

  Your concern brings up the fact that it shouldn't be so important to you anyway - if you don't think you'll use it very often. ;-)

• Microsoft will support windows 7 long term?

  Original title: support for windows 7

  Microsoft will support windows 7 in the long term, the reason I ask this is that I'm so fed up with windows 10 I'm looking to go back to windows 7 where I'll get less browser issues with does not, what microsoft partners telling me I have a lot of driver's fault and then after you leave them in OH YES, I have CRACK FOR this ONE TOO, in one day, my computer was silly.

  F.W

  Fred

  Record the lifecycle of Windows:
  http://Windows.Microsoft.com/en-GB/Windows/lifecycle

• Long-term headless app work: QTcpSocket receive do not

  We have an app without long-term head that uses sockets for IPC.

  Headless part contains a QTcpServer, the user interface of the QTcpSocket.

  the code without a head:

  server = new QTcpServer(this);
  bool ok = connect(server, SIGNAL(newConnection()), this, SLOT(onNewConnection()));server->listen(QHostAddress::LocalHost, m_port);
  

  user interface code:

  bool stateOk = connect(clientSocket, SIGNAL(stateChanged(QAbstractSocket::SocketState)), this, SLOT(onStateChanged(QAbstractSocket::SocketState)));
  if (!clientSocket->isOpen()) {
      clientSocket->connectToHost(QHostAddress::LocalHost, m_port);
      bool conOk = connect(clientSocket, SIGNAL(connected()), this, SLOT(connected()));
      bool disconOk = connect(clientSocket, SIGNAL(disconnected()), this, SLOT(disconnected()));
      bool readReadOk = connect(clientSocket, SIGNAL(readyRead()), this, SLOT(commandReceived()));
      bool errorOk = connect(clientSocket, SIGNAL(error(QAbstractSocket::SocketError)), this, SLOT(error(QAbstractSocket::SocketError)));
      Q_ASSERT(errorOk);
      qDebug() << "connected to server socket";
  }
  

  output debug shows headless headless app is running constantly, the signal is properly connected, the socket for the server returns isListening() to true.

  debug output of the user interface shows that all signals are correctly connected, and onStateChanged goes from HostLookupState to ConnectingState and finally to ConnectedState

  At this point, I'd wait the server socket to pull the signal of newConnection, but alas, it isn't.

  I generate and run the xandos example and it works correctly, but it does not long-term use and has the server in the user interface, while the part without head connects.

  I suspect that the app without head doesn't have an event loopand QTcpServer documentation states:

  Although QTcpServer is mostly designed for use with an event loop,it's possible to use it without one.In that case, you must use waitForNewConnection(),which blocks until either a connection is available or a timeout expires.
  

  Now I wonder:

  The long March without head app has an event loop?

  If this is not the case, how best to use the blocking call without disabling the rest of its features? A thread?

  Write that post little got me on the right track already, a problem merging caused the socket to the server must be started before you call the constructor of the Application (which provides the event loop).

  Now the server is running, receive a few orders, then she stops unexpectedly, the fires of the user interface
  QAbstractSocket::RemoteHostClosedError changes the State of ClosingState and UnconnectedState

• Long-term certificate

  I tryied to download package (app observer) on the Google game console, but they ask me to sign the package with a valid certificate for 25 years. Access to key Mac only let me similarly a certificate of 20 years. Where and how can I create a certificate with such a long term?

  You should be able to increase the validity

  -validity

  The validity period of the key, in days. Note: A value of 10000 or more is recommended.

• Gmail account login no longer works. Error message

  Gmail account login no longer works. Error message is: 'no riuscito per della through the [email protected] account. He Server di posta pop.gmail.com ha better: Internet connection required: https://support.google.com/mail/answer/78754.

  Received an email from Gmail, saying: they have blocked access to my account. They suggest to allow less secure apps... but I don't want to!
  I will be able to continue using Thunderbird?
  Or should I move on? I hope that this issue is resolved soon!

  Upgrade to Version 38. He supports this false "less safe" junk composed by Google.

• Long-term storage of inkjet all-in-one (F4480)

  Is there a good way to prepare for storing ink jet printers long-term (> 1 year) so that the jets get clogged?

  We have a F4480 deskjet all-in-one that has not been used in several months.  As far as I know it still works fine.  It has been stored in the original box & delivery packaging for 3 months.  We hope it won't be necessary for 1-2 years.  We had 2 former HP hoof to the top after a long period without use.  I said that they should be tested every month or two.  Do you need >

  This model integrates print on ink supplies heads, so in the worst case, you'll just need to replace the cartridges.  I think after a year or two ink supplies will probably dried out or clogged.   When you restore the printer to the service, you may be able to run up to three cycles of cleaning of the Toolbox.  Is there is an impression, but it is scratched or one or more colors are missing, then soak the nozzles of the cartridges down in about 1 "of very hot water for 10 minutes can recover the cartridges.

  The best plan would be to simply use the cartridges before long-term storage and then store the low or empty cartridges in the printer.

  For best results, store the printer with cartridges installed.  Be sure to turn off the printer to its power switch and wait for the cartridges to Park properly before removing the power.  Store the printer in a place cool and away from drafts, pets and other potential hazards.  Make sure that the printer is stored standing in its normal operating position.  Store the printer upside down or sideways or the end can cause problems.

• . MOV for Long term

  I'm converting to digital using Roxio Video Capture video old VHS of my family. It works very well but is that the only question I have... .Mov format is good for long-term file storage? Should I upgrade to something more universally used like MP4?

  Your analog conversion rate is a source of poor quality in the first place, and you won't get anything else that standard definition quality no matter what your use container.

• is iCloud for storing long-term reliable?

  For storing long-term valuable family photos?

  It is an excellent product to store your valuable photos and videos, but notes, store them on all your devices.  iCloud is not a traditional backup cloud based storage platform.  In other words, you cannot remove photos from a device once they are stored in iCloud thinking you will save space this device because, once removed, it removes all devices.  If you agree with this, then sure, go ahead and use iCloud for your photos/videos.  If you are looking for a traditional backup cloud storage platform, consider these third party apps like Dropbox, Flickr or Google Photos (my favorite).  Good luck!

• Hi Folk, I need to buy new 2-3 computers for my new office for architecture. Please enlighten me what would be the best long-term investment, while I can't invest as much. Thank you very much and enjoy the coming days of Advent. Kindly, Siamak

  Hello Folk,

  I need to buy new 2-3 computers for my new Office of architecture.

  Please enlighten me what would be the best long-term investment, so that I can not spend as much.

  Thank you very much and enjoy the coming days of Advent.

  Nicely,

  Siamak

  You need to investigate "in person"... Go to the Apple Store (or a "Apple Shop" located in a section of another bank) > click here > https://locate.apple.com/ch/fr/sales/?pt=4&lat=47.3692907&lon=8.5418192 for locations at or near Zurich

• How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002

  How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002.   I found the site for download fixit, but I have no desktop feature other than the startup repair options.  I thot I could download fixit from my flash drive solution, but I can't find a command prompt to access.  It is the only page from command prompt I can find... I'm in x:\windows\system32\cmd.exe trying to find the good order for my location flashdrive G:

  I used to go G and get G but it says only that go and get are not internal or external commands and not an executable program or batch file

  HELLLLLLLPPPPPPP!   Thank you!

  x:\ I do not think it is a 'valid' for what you intend. I used a 2nd computer and the original disk, I don't remember tho if I used windows file transfer or just copy, but I had the disc copied to the flash drive and reinstalled windows 7. I have still no working dvd rom (x 2) they open and close (sometimes), but the drivers need to be mounted to something incomplete. repair is absent as well. some other problems too but its been executed in this way for months (apx5). here and there, I get an email from answers, that's how I arived here really (enroute) hope this helps (a bit)

• I can't get into my e-mail address. Account is no longer supported. Error message 35

  I can't get into my e-mail address.  Account is no longer supported.  Error message 35

  Hello

  You don't tell us the account provider. Hotmail, Windows Live Mail, Yahoo or so on--just the provider
  After the @ sign and no e-mail address full which responds automatically to blocks.

  You must contact the mail provider, because we cannot help regardless of the provider.

  Here is some info that might help:

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/
  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  --------------------------------------------

  Answers is a peer support group and unfortunately has no real influence on Windows Live.

  Windows LiveMail has its own Forums, so you can ask your questions there.

  Windows Live Mail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solution Center - Solutions mail - Mail Forums
  http://windowslivehelp.com/

  Windows Live Mail - mail Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  Compromised account - unauthorized account access
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How stable is the long term outputs analog USB-6008?

  The USB-6008 datasheet do not specify the stability long term of the analog inputs and outputs.

  I'm looking for stability compared to the ambient temperature and time (several months to a year), mainly for the outputs or the D/A reference voltage.

  Is there any information available?

  Thank you.

  The precision specification takes into account the evolution both because of the temperature and duration (stable).  Thus, for the period of a year that we guarantee these specifications, which list you is correct.  However, apart from the period of one year since the calibration, this specification may be is more inaccurate.

• Long-term file types (i.e., 'Microsoft Visio Drawing') vs short ("XLS" for Excel files) displayed in a detailed view of the folder

  In my point of view of folder, file types include long-term (i.e., "Microsoft Visio Drawing" and some are abbreviated ("for Excel files XLS).) Before this machine, all my types of files have been long-form... How can I get the form long back for all of my files?

  Have you tried to create a macro - see this

  http://www.MrExcel.com/Forum/showthread.php?t=525026

  If you save stencil files and model that are designed to work together, to ensure that their design page, styles, and colors settings are compatible. For more details, see http://msdn.microsoft.com/en-us/library/aa200991(v=office.10).aspxChapter 10, Managing Styles, sizes, and Colors.