Recording disabled after having accidentally automatic punch in and out

Similar Questions

• Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image

  Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image for 15-30 minutes I lose everything I did when the program stops working... This is extremely frustrating, as I can't use the program

  Hello... Adobe, you have a phone number I can call to talk about this?

  Why don't answer you my survey?

• WinRE disabled after resizing partition recovery of Lenovo and OneKey Re works

  System: Lenovo Yoga 700-14ISK 80QD

  The almost 4 GB of free space on the partition of Lenovo have been very tempting, after researching if it is safe and also, I decided to give it a go by using a 3rd party free software has saved me several times in the past (MiniTool Partition Wizard). Interesting that most tutorials on create a recovery drive and the removal of the partition, but I decided for now to get just the free space until it takes more, and I did not find that resizing with 3rd party software will mess up your WinRe settings only once this has been done. Here's the info of the agent:

  /Info C:\Windows\System32>REAgentC
  
  Recovery environment Windows (WINRE) and system reset
  
  Information:
  
  Status of Windows RE:         disabled
  
      WINRE location:
  
      Identifier of the Configuration Data (BCD) of startup: 47251840-c09c-11e5-af06-00808a8e1ce5
  
      Location of recovery image:
  
      Image Recovery index:      0
  
      Location of the custom image:
  
      The index of the custom image:        0
  REAGENTC. EXE: Successful Operation.

  After resizing and the recovery agent control, I realized that I lost details such as the location of the partition, offset and id. After changing the System32/recovery with outreach and id ReAgent.Xml it was not enough to allow that the path for the location of winre etc miss me him.

  This is what my file looks like now:

  Can someone help me and give me the necessary adjustments?

  My laptop works fine and OneKey recovery works well, except that I cannot create a recovery drive more. Thank you.

  After watching my partitions and shifts again, I modified the agent accordingly re and now I am able to create a recovery drive.

  Solution:

  1. Mode of high open CMD
  2. type diskpart
  3. partition of type list
  4. use select partition = x where x is the number of the partition that you are interested to see the details
  5. partition detail to see GUID, offset and other type information
  6. Type exit
  7. Change Windows/System32/Recovery/ReAgent.xml
     • Change path, offset, and guid for tag WinreLocation
     • That's why your score are hidden to make sure that the path looks like this:
       • \\?\GLOBALROOT\device\harddiskY\partitionX\Recovery\WindowsRE
       • Where is the number of hard disk - usually so unique 0
       • Where X is the partition for WinRE number determined in step 4
     • Apply the same logic to PBRImageLocation tag to partition LENOVO_PART
  8. In CMD type reagentc /info and now you should be able to see your location
  9. If step 8 failed try reagentc first enable and repeat step 8
  10. I don't know if it is relevant or not, but a computer restart might help and repeat steps 8, 9

• No video after having replaced the graphics card and power supply

  I have a desktop HP Pavilion m9515y PC. The graphics card that came with it (NVidia GeForce 9600 GS, 768 MB) did not suit the minimum specification required by a game that I played. Things in the game has been very slow - I could see a delay of s ~0.5 to move my mouse on the splash screen for the game.

  Today, I bought a new graphics (NVidia Geforce GTX 550Ti, 1 GB) card and a Corsair 700W PSU to replace the 350W one that came with the system.

  From the outset that I messed up something. It's been a while since I opened the box and I thought wrongly that the top panel (with the rubber surface) to come off before the side panel could be deleted. I removed the two screws now the top panel in place and slipped it in the process it disconnect and two thin black wires which I do not know the function. It was attached near the power button and one was attached to the rear of the Panel. The sons have stripped the ends rather than a connector of some sort and I don't know how they connect back or if they are the cause of the problem that I see now.

  In any case, I advanced and removed the old PSU and video card and replace them with the new. Two of them are significantly larger than the components, they replaced, but they managed to adapt with some maneuvers. All cards are well-placed in the PCI slots.

  The power is connected hard disk, DVD drive, the motherboard and the new video card. I'm not aware of any other connections that need to be made to food. There was not much clearance between the power supply and the back of the DVD player, but I was able to get the data and clinging to the DVD of power cables.

  After having done all that, I hooked my monitor DVI cable, plugged in the power cable and turned on the power. When I plug it in, the power button on the top of the tower is illuminated and the power seems to work. However, my monitor indicates that there is no video signal. I tried to put the old return video card, but I don't always have a video signal. Because I can't get a video signal, I can't tell if the PC is start or not.

  Does anyone know the purpose of the wires that were connected to the top of the Tower?

  They would cause they cause this problem if they are not correctly connected?
  Any suggestions for the possible causes of the absence of a signal from a video card?

  I just took the PC to a repair shop and it turns out that the problem was quite simple: I don't have the PCU power cable 4 pins hanging. Everything seems to start fine when we hung out at the shop. Fortunately, the place that I took did not even charge me what as they don't charge co-pays and since it is such a simple fix.

  Now I feel kind of stupid, but I know better next time...

• SerialNumber disabled after switching to Mac to Win and return to Win.

  Hello

  I first bought CS6 for Windows, that I switched to Mac.

  I bought a new laptop today and I wanted to reinstall CS6 on Windows, but the serial number is disabled.

  Unfortunately, I didn't disable the serialnumber on my old PC and Mac. I just deleted it.

  There is no way to reinstall, because I sold them.

  I was looking for some mail contact or whatever is but it only the cat, which is currently offline.

  Y at - it no mail contact or number to the Germany?

  What is the problem with this company? I have the money paid for it and there is no chance to activate this in time?

  You are allowed to swap one time platform, so you wouldn't be able to get it back to a Windows license even if everything else was in order with whatever your situation.

• When I tried to reload FIREFOX after having accidentally disconnected from my toolbar. I received the message that Firefox is NOT compatible with my operating system.

  Am I never done with Firefox? Im running Max OS 10.5.8
  What gives? I don't have the latest version of inspiring more... just an alternative to Safari.

  It was entirely compatible until I accidentally moved the icon on my desktop. Now, he is no longer in my Applications folder and is not replaceable?

  http://www.Mozilla.com/en-us/Firefox/all-older.html

• No sound on the computer after having accidentally deleted audio drivers.

  Original title: help!

  I acidentally deleted SoundMax my computer turned off, then reinstalled and still my sound does not work. I made each update and suggestions that I saw online and nothing works! Help?

  If you can not solve the problem, then you could try System Restore. To access, simply click on the Start button in the left corner. Then select all programs. After that, go to acsessories. Then, you click on system tools. After that, simply choose System Restore. You can then select the date to which you want to restore the machine. I he would restore the date before you start to have problems. Be aware that you may need to reinstall some things on rare occasions, but it's never happened to me and I did system restore several times.

• After having visited a Web site and then go to my mail, I apparently produce a project email that I have to delete, why is this?

  Whenever I have visit a Web site and then try to read my e-mails, a project e-mail message appears first of all that I didn't realize. Then I have to delete it and then go to my Inbox to that. How can I stop this please?

  The Firefox "email link...". "menu item is not a link to your e-mail program. It is supposed to let on that you send a link, by opening a new message window in your email application, which includes a link to the page you are. (Ref: change the program used to open links from email).

  Firefox does not include a link to read your e-mail messages. If you just want to check your email, open Yahoo Mail directly.

• After you have installed the KB2707511 and updates KB2724197, error in execution of NTVDM.exe.

  Original title: problem with KB2707511 and KB2724197 updates.

  When you enter a DOS program I get a failure of execution of NTVDM.exe. Remove these updates restores normal operation. Anyone know if there are risks in doing this?

  Hi LeRoy,

  If I understand correctly you will receive an error by, NTVDM.exe running, after having installed the updates KB2707511 and KB KB2724197. However once you uninstall the updates, the problem is resolved, is that correct?
  I apologize for the inconvenience, please note that it is a known problem and Microsoft released a supported fix to help solve the problem.
  Please follow the links below to help troubleshoot-made the question.

  I suggest you reinstall the security updates that you uninstalled and then run the fix as suggested to solve the problem.

  KB2707511 and KB2724197

  MS12-042: Description of the update of security for Windows XP and Windows Server 2003: 12 June 2012
  http://support.Microsoft.com/kb/2707511

  According to the section more information under, known issues with this security update.
  

  
  

  The hotfix update is available,

  "NTVDM. EXE has encountered a problem and needs to close"error message when you use 16-bit applications in Windows XP
  http://support.Microsoft.com/kb/2732488

  Once you run the hotfix you can continue to install the rest updates normally.

  Please let me know if the problem has been resolved, or if you need additional help on the issue.

  I hope this helps.

• I get the message "iPhone is disabled try again in 24,145,404 minutes after having turned it on."

  I get the message "iPhone is disabled try again in 24,145,404 minutes after having turned it on."

  Anyone know what this means?

  Which sometimes occurs after successfully entering the access code to many times. See this support article for help. -AJ

• Disable the creation of Automatic System Restore Point? -SOLVED

  Is it possible to disable the automatic creation of System Restore Point (to prevent Windows to create points of food every day and after (re) install programs / Windows updates)?

  I want to manually create System Restore Points because the automatic creation uses too much space, because I install new programs very often.
  Note that I still want to use system restore. I don't want it to be automatic.

  Hello

  Well, Yes, you can shut down the computer to automatically create restore points by disabling the system of protection under the system restore. System protection is a function that creates and records information about your computer's system files and settings regularly. The system protection also saves previous versions of files that you have modified. It saves these files in the restore points that are created just before significant system events, such as the installation of a program or device driver. They are also created automatically once every seven days if no other restore points were created in the last seven days, but you can create restore points manually at any time.

  Again, I suggest you to create a restore point when you turn off system protection. Basically, to store restore points, you need at least 300 megabytes (MB) of free space on each hard disk with the system on Protection. System Restore can use up to 15 percent of the space on each disk. As the amount of space fills up with restore points, System Restore deletes older restore points to make room for the new. The system protection, the feature that creates restore points, is enabled by default. We recommend that you keep System Protection turned on for all hard disks that contain important files so that you can use system restore if you need to.

  Check out the link to disable restore points:

  http://Windows.Microsoft.com/en-in/Windows7/turn-System-Restore-on-or-off

  For more information, you can take a look at this article as well:

  http://Windows.Microsoft.com/en-in/Windows7/system-restore-frequently-asked-questions

  Do not hesitate to ask if you have more queries on Windows.

• How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please?

  How can you cancel the download of an update that was started by after having pressed the button "Check for Updates" in the window "On Firefox", please? If possible, please cover all platforms, Mac, Windows, Linux, although the first mentioned is what currently applies to my situation.

  Thank you.

  Such a download is usually recorded in a updates or updates folder in the program folder or the Firefox application.
  You can delete this folder to cancel the download.

  If the files have already been downloaded, then delete the files in the folder updates\0 and updates.

  • http://KB.mozillazine.org/Updates_reported_when_running_newest_version
  • http://KB.mozillazine.org/Software_Update

  Mac: /Applications/Firefox.app/updates "/path_to/Firefox.app/Updated.app"
  Linux: "/path_to/firefox/updated"
  Windows: C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  

• Satellite L750 - 1RV WLAN disabled after startup or sleepmode

  Hello
  last week, I disabled using Fn + F8 wireless network adapter. After that I swichted this on via Fn + F8 and it worked again.
  But after that Sleepmode WLAN didn't work.
  Watching Fn + F8 it says 'On '. I have to turn off "" first and that "light", or I choose "immediately" (WLAN and Bluetooth) have job WLAN.
  After having a peek in the forums, I checked again WLAN driver and tried in DEVICE MANAGER, disable the option "computer can turn off this device to save power" (sorry, it's my translation of German Windows). But nothing helps.
  WLAN is still not active after start or mode 'sleep'.
  Pls advice.
  Thank you and greetings!

  I found another thread on this problem and this work around has been confirmed in this forum as a solution:

  -Press the Windows key + X, select Device Manager.
  -Right click on network adapters.
  -Click on properties and select the power management tab.
  -Uncheck allow the computer to turn off this device to save power.

  Finally restart the system

  Your comments would be appreciated

• Windows Update for Vista family 32-bit premium does not update all. 57th error and sku011.cab for office 2003. Malicious tool not updated. Stays on the list was updated even after having managed States.

  Office 2003 sp3 do not install in windows update. It is a 108.2 MB file, no kb #. Under 2 other 2003 office updates. KB977713 for office outlook and for office 2003 update kb907417. 57F error message comes out after having failed in windows update. Sku011.cab missing error comes just after process fails at the end of the attempt to update for the updated 2003 3 office. Tool kb890830 in windows update to install malicious but indicates successful when finished. Returns to windows update to install. All other above mentioned updates show missed.

  Thanks for your time,

  Vincent Ciaramella

  The malicious software removal tool does not use an installer. As a general rule, when you run the malicious software removal tool, it creates a temporary directory named at random on the root of the drive of the computer. This directory contains several files, and it includes the Mrtstub.exe file. Most of the time, this folder is automatically deleted after the tool to the end of execution or the next time that you start the computer. However, this folder may not always be automatically deleted. In these cases, you can manually delete this file, and this has no adverse effect on the computer.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  With regard to the Office updates:

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyId=1B0BFB35-C252-43CC-8A2A-6A64D6AC4670 seems to be an update very old "update for Office 2003 (KB907417)"

  With regard to the http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=da24d44b-4d6e-4bcd-b7cd-ca56bf6c0ba7
  Update for the junk e-mail in Outlook 2003 (KB977713) filter

  Have you tried manually download KB977713 and install the same.

  Sometimes, however, it still doesn't work: full-file version update may request Office source files
  http://support.Microsoft.com/kb/840169

  TaurArian [MVP] 2005-2010 - Update Services

• Why attached used pps files opened after the latest Automatic update of the ie8?

  Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
  attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
  When I try to open files pps attached, this is what I get.
  a box with a red x will appear and this is the message;
  "this file has no program associated with it for performing this action.
  Create an association in the FOLDER OPTIONS Control Panel."
   
  Before the automatic update, this function worked fine.
  Also, the association for pps files is still there in the Folder Options Control Panel.
  and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
  .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
  .. just one more why people hate automatic updates or updates of any kind.
  like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
  So what's the cure for this annoying problem?
  E-mail address is removed from the privacy *.

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  I also tried renaming it as shown below, and it will not let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

    Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.