recording in Gallery

Similar Questions

• Problem recording photo after the edition of windows live photo gallery

  Whenever I try to edit an image in windows live gallery and try to save it, I get the following message appears AN ERROR IS PREVENTING PHOTO GALLERY OF SAVING THIS PHOTO.

  Can you offer me a solution or let me know if microsoft has a fix for this problem

  Hi jetparjas,

  Thank you for using answers Forum.

  You use software to back up your information?
  Maybe a new external drive with a backup program?
  Using drive encryption?

  Looks like some program prevents the Gallery to save changes, this usually occurs with a backup software that monitors changes in the files. Sometimes the software that allows us to make changes think the file is open somewhere else and it will not save.

  You can try to perform a clean boot to see if a startup program is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. under the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK, and then click restart.

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OKand then click restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK, and then click restart.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click restart.

  Please let us know if that helps. Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The colours become Blotchy and have an unpleasant orange cast after record in Photoshop and display in the Gallery pictures Windows or online

  Hello world!
  So I'm having another problem with my color settings when recording of my image. I don't think it's to do with the color settings profile because I had a problem with those from before, but my settings seem to all be OK and that they should be, but who knows. Basically, once I've saved my image in photoshop and then open it to view the windows photo gallery or download online and view it. shades seem very fuzzy and unpleasant. The image seems to be developing a more contrasted casting yellow orange, colors appear more smooth and natural as they did in photoshop. It must be something to do with how I save the image but I can't seem to understand where I have gone wrong
  Here's a before and after picture of comparison; The left image is the appearance of the image in photoshop and how I would like it to appear when I save it. The left image is the appearance of the image once it has been saved in photoshop then opened in the Gallery of photos or downloaded Facebook for example windows. As you can see, the colors are not as smooth as the picture on the left and he seems to have a warm cast contrasted on it that I don't like at all. Maybe I'll be picky, but if anyone has any suggestions on what I am doing wrong, I would appreciate your comments!

  Thank you!

  There will always be a difference between complete with color management software and software without color management. The first is right; the latter is false.

  Most of the major Adobe applications are color management. So is the Windows Photo Viewer. All color management applications should always display the same - if this isn't something wrong (usually with the monitor profile). These applications need it, it's a profile type conversion from the document profile for the monitor profile. The result of this conversion is going on the screen. This conversion is performed on the fly, which is updated constantly, while you work.

  It follows that the accuracy of the display depends on the accuracy of your monitor profile. Best profiles will always be with a stallion.

  Without color management applications are not all that. They just send the numbers in the original directly to the monitor.

  You are talking about what happens "when you save the file. Nothing happens when you save. What happens, is that you use different applications to display the file. That is the difference.

• How can I retrieve files from the Gallery?

  'Gallery' is an option which is usually a default value for the recording of things such as documents, but there seems to be no way to recover anything of him. I usually avoid altogether but sometimes, when I'm not alert enough, stuff gets through in this "black hole" never to be seen again.

  Help!

  Also how to remove 'Gallery' altogether?

  "Gallery" is an option which is usually a default value for the recording of things such as documents

  I have never heard of a feat of the Gallery, the folder, or the library on the Mac.

  Gallery is certainly a thing of MS windows, you're in the correct discussion?

  Its clients include basic details as model of Mac, Mac OS and the specific application you are using, if not his conjecture all for anyone trying to help you.

• Why can I save is no longer on my windows photo gallery?

  Until I downloaded mozilla firefox I managed to save an image in my windows photo gallery. She recorded now in other files. I can't get them my Gallery. Why? How should I do?

  In fact you can not save pictures of facebook/pinterest by any browser just by right clicking on it. You must click on this image and it will open in a new page and now right click on the image and it will be a backup image option and now your file will be jpeg. Please try and let me know.

  Thank you for your patience.

• How to make a click right a link included to record on my Android phone?

  How can I simulate a "right click and save the target under ' on a link embedded in a web page? I am recording 2 videos, one is a demonstration of the product and the other is an Assembly and the installation of a product that I plan to buy. The vids are click embedded able links in the description of product web page. I am under android OS KitKat on a samsung gn3.

  Figured it out. Never mind.
  Clicked on the link I wanted to download.
  Long supported on window of the video, not the link itself. Used "save video" option in the context menu which appeared after the long press. Find the file by using the Gallery App selected the file from there, selected the player to use. Voila. Play a downloaded video offline.
  Happy. Happy. Happy.
  Hope this helps someone else who is new to the Android and/or Mobile FF files.
  I have been using Android smartphone for about 2 months. Before that, I used a Windows laptop exclusively. Android is really a paradoxical catharsis. Difficult, but not insurmountable.

• App Gallery hangs when you try to save the changes

  After cropping of a photo in the gallery app, it crashes when you try to save changes to the photo. It does not occur when recording other changes.

  It is an Alcatel One Touch light on 1.0.1. But oddly enough the problem is more product. I'm still not sure of what caused it. Then... I guess I can mark my question as answered. Thanks for the reply.

• When I long press on and record an image it goes to my downloads, the image is stored on my phone? or app only?

  The image does not appear in the Gallery of my phone, but I can see in the download section of the application. Let's say that I want to record and mms image rather that the share link, is it not possible?

  Oh, and it is not a plugin problem, because I have installed "Personas" and has done after the image.

  The image is saved on the SD card, but it does not appear in the Gallery right away due to a bug in Firefox: https://bugzilla.mozilla.org/show_bug.cgi?id=646550

  This bug will be fixed in Firefox 5, which will be published in about two months. If you want to help test the difficulty today, you can download a version of Firefox 5 Overview ("Aurora") of https://wiki.mozilla.org/Mobile/Platforms/Android

• .gif does not not with Gallery

  . Animated GIF image works on browser, but when recording it and display it in the Gallery does not have. On Samsung galaxy tab 10.1. GIF animation images work in the Gallery, then how is it does not work on my Sony tablet s when sound using the Viewer software and the android even Gallery. Please update this minor problem. Thank you.

  Hello Cypher,
  Thank you for your message.
  I downloaded a GIF animated from Android Market Player, and it shows my picture with animation.
  Check out the Gallery of your. GIF or. JPG but will not animate the image.

• When I try to fix a picture in windows photo gallery, she disappears. Why is this happening and how can I fix

  When I want to work with a photo in Windows xp home, I use the Windows Photo Gallery.  I can open the photo, crop the photo very well, but when I want to adjust the settings and I say "Fix", the photo becomes a black rectangle, so I do not see what effect have adjustments on the photo before I have record improvements, so I have to go all the way back and open up to see the changes.  Is there a solution to this?

  When I want to work with a photo in Windows xp home, I use the Windows Photo Gallery.  I can open the photo, crop the photo very well, but when I want to adjust the settings and I say "Fix", the photo becomes a black rectangle, so I do not see what effect have adjustments on the photo before I have record improvements, so I have to go all the way back and open up to see the changes.  Is there a solution to this?

  ======================================
  If you reduce the hardware acceleration of your chart
  and achieve an improvement, it is an indication that you
  you will need to update your video driver.  Improvement or
  No... don't forget to return the full acceleration slider.

  The following article explains how to:

  (272193) PI: how to troubleshoot graphics issues
  http://support.Microsoft.com/default.aspx?kbid=272193
  (scroll down to "Microsoft Windows 2000 and Windows XP")

• After downloading, Windows Photo Gallery does not display the Photo, why?

  For several months, whenever I open a message, image or text downloaded with, library or, Nero Photosnap, I do not get to see the Photo, or text. I have to use Explorer or Firefox. Photo Gallery just recording the of scanned photos, downloaded cheap. I have "NERO 7" and "WINRAR" installed." Everything worked fine until a few months ago. How can I fix?

  Hi willmulholland,

  1. What is the file format of the uploaded image?

  2. use the Windows or Windows Photo Gallery live photo gallery?

  3. you receive an error message when you try to view the images uploaded using Windows Photo Gallery?

  4. are you having similar problem when displaying any other picture using Windows Photo Gallery?

  If you use Windows live photo gallery, then I would say that you post your question in the forums of Windows live.

  http://windowslivehelp.com/forums.aspx?ProductID=20

• Why can't add photos in Gallery windows live photo in my emails?

  When I want to add photos in an e-mail message, when I click on the photos, my windows live photo albums don't pop up. Only records of pictures that are in my pictures show. What I am doing wrong? Why the photo albums are displayed so I can just click on the album to send as a slideshow in my email?

  Hi CynthiaAyres,

  As you use Windows Live Photo Gallery, I recommend you to post your question in Photo Gallery Portal for assistance.

  Hope the helps of information.

• Rename several Photos in Windows Photo Gallery Changes their order... Why and how to avoid this phenomenon

  When I click on Edit: select all and file: rename to rename all the pictures in a file, Windows Photo Gallery changes the order of the photos in the file when it renames them. I need all the photos in their original order as many of them are sequential in nature, so how do I rename all the pictures in a file and make them come out in the original order after renaming?

  Thanks for any help...

  Once rename you them, it shows them in this order,

  Depending on how you have renamed them, you could look in the records of the event, or an association of tag system, because wlpg bed than the names that the order in which he plays or show thumbnails,

  The exception would be if you did a slide show you can rearrange the way they play by dragging them around.

  Also, I think you should consider tags group and no file file rename.

• Windows Live Photo Gallery does not use default printer

  When I print from Windows Live Photo Gallery it always by the incorrect printer default.  By default, it uses the fax printer.  All other characters to the right printer progames be default.  And under priners Control Panel, it shows the green check mark on the printer default right.  If I change to a photo printer, it prints very well.  But then the next image always defaults to the fax printer.  I use Vista 32 bit.  The version of Windows Live Photo Gallery is 14.0.8064.206.  The printer is a HP C7180.  And I have the latest version of the driver.

  Is there a way to get Windows Live Photo Gallery to use the default printer? Thanks for your help. Harry Karr

  I think that the part Ne03 refers to a network or shared printer that is connected to your machine.  For what it's worth, I have this entry in my registry.

  HP Photosmart C4380 series, winspool, Ne02: so your entry (to me) seems pretty good.

  Have you clicked on your HP printer and select the option "Run As Administrator" / Properties / Security and checked permissions, such that manage printers, records management, to ensure that everything is all right in there?

  I'm still thinking possible "Bug", but are happy to be contradicted.

• How do you keep Gallery Windows to create individual folders for each photo?

  I have to use Windows Gallery to scan all my photos because HP does not have a driver for my printer to Windows Vista support. My printer will print, just not scan or copy.  The problem I have is that whenever I scan a photo gallery Windows will create an individual file for each individual photo. I am in a position to specify which folder I want all my photos go in, but to instead of the Windows gallery just the photo in the folder, I have created, it will also create its own individual folder first with the picture in it and put the file in its entirety within the folder that I created.

  Maybe this will clear what I'm trying to explain - example:
  (1) I create a folder named "Christmas 2009".
  (2) I scan 1 Joey with Gallery Windows.
  (3) once Joey 1 is scanned, a window will appear and ask me if I want to name the picture. I type the name of Joey 1 and specify the option to 1 Joey in the folder, "Christmas 2009".
  (4) Gallery Windows puts 1 Joey in 'Christmas 2009' but at the same time also creates a folder named Joey 1 with Joey 1 photo in this folder.
  (5) now I have a folder named Joey with a picture of Joey 1 1 1 Joey folder. And Joey 1 folder is placed inside the folder "Christmas 2009".
  (6) then I scan another photo of Joey, which I will not name Joey 2 and also specify 'Christmas 2009' for this photo. Windows Gallery puts 2 Joey in a folder created and named, 'Joey 2' and then puts this folder also in the "Christmas 2009" folder. "
  (7) now inside my folder "Christmas 2009" I have now 2 individual records with each of these images that I named above.
  (8) this continues with each photo I scan. After a while I could have 15 images inside "Christmas 2009" but each of these 15 photos are inside its own individual folder within the "Christmas 2009".»
  (10) I don't want 15 individual folders inside "Christmas 2009", I want only the images in the folder I created. But in order to have just the photos, I have to move each photo, one at a time, out of the personal file, in that it is, then move it by itself in the folder "Christmas 2009".
  (11) and then after I moved the picture of his personal file, I remove the individual folder because now the photo is no longer in it and the file is now empty.

  So next time, I went to the options and disabled everything that had to do with tags, (hoping that was the problem), but when I scanned another photo after doing this, instead of the Windows Gallery, create a folder with the name of the photo inside, he instead just create a folder named by the date that I scanned the photo. So I still have individual folders with the photo inside within "Christmas 2009", but now the individual file is just rediscovered: the date at which the photo was scanned.

  It drives me crazy. I've also posted this problem on some of my other tech forums, but nobody else seems to have this problem when scanning with the Gallery Windows. In my view, it will do with my settings but nothing change in the settings seem to have an effect on this problem. I have Windows Vista Premium, don't know not weather has nothing to do with him or not.
  Thank you
  Sheila

  If you want the same old basis like photo gallery interface I suggest this version,

  http://explore.live.com/Windows-Live-Essentials-XP

  It works fine with vista or win - 7 and the only features it lack is fuse photo, but the toolbar is exactly the same.

  You will need to take a class to figure out this version,

  http://explore.live.com/Windows-Live-Essentials?OS=other

  And is probably the one which is the upgrade that you're talking about, but it is allot more complicated to use and has more errors associated with it.