Save the session before disconnecting

Similar Questions

• Windows won't let me not newspaper inside a loop to save the settings and disconnects

  Windows won't let me open a session in this Office makes a loop to save the settings and disconnects

  It was a virus that's causing the problem

• Error in the determination of Web save the session

  Hi all
  
  We get the error "Unable to save" immediately after clicking on the "Save" link in the pop-up Web determination. We had data from siebel to OPA as IO and the output of the execution of the rule appears correctly in the window of WD.
  
  We must perform certain actions in siebel side (we customized the WF 'Policy of automation Save Session IO Post') then we are by clicking on the link 'Save' to save the session to Siebel. But the backup of session (policy of automation Save Session IO) workflows are not called when we save only the error is displayed. It seems it is getting error when calling the web service inbound. We checked the logfile WD as follows:
  
  
  2012-05-17 15:32:22, 987 INFO [STDOUT] * GETLISTOPTIONS INICIO
  2012-05-17 15:32:22, 989 INFO [STDOUT] * ATTRIBUTE: optionLes
  2012-05-17 15:32:22, 991 INFO [STDOUT] 8242687 [http - 10.92.5.3 - 8280-2] ERROR com.oracle.determinations.interview.engine.screens.LocalControlFactory - list provider returned the error: /C:\config_tiposvalores.xml
  java.lang.RuntimeException: /C:\config_tiposvalores.xml
  at com.oracle.determinations.interview.engine.userplugins.DerbyListProvider.getListOptions(DerbyListProvider.java:120)
  at com.oracle.determinations.interview.engine.screens.LocalControlFactory.initInputControl(LocalControlFactory.java:191)
  at com.oracle.determinations.interview.engine.screens.LocalControlFactory.createAndInitControlInstance(LocalControlFactory.java:156)
  at com.oracle.determinations.interview.engine.screens.LocalScreen.init(LocalScreen.java:135)
  to com.oracle.determinations.interview.engine.screens.LocalScreen. < init > (LocalScreen.java:40)
  at com.oracle.determinations.interview.engine.screens.LocalSessionScreenService.createScreenInstance(LocalSessionScreenService.java:299)
  at com.oracle.determinations.interview.engine.screens.LocalSessionScreenService.getScreen(LocalSessionScreenService.java:112)
  at com.oracle.determinations.web.platform.controller.ScreenController.getScreenInstance(ScreenController.java:274)
  at com.oracle.determinations.web.platform.controller.ScreenController.renderScreen(ScreenController.java:112)
  at com.oracle.determinations.web.platform.controller.actions.InvestigateAction.getResource(InvestigateAction.java:53)
  at com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.doGet(WebDeterminationsServlet.java:80)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at com.oracle.determinations.web.platform.util.CharsetFilter.doFilter(CharsetFilter.java:46)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:235)
  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
  at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:190)
  at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:92)
  at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.process(SecurityContextEstablishmentValve.java:126)
  at org.jboss.web.tomcat.security.SecurityContextEstablishmentValve.invoke(SecurityContextEstablishmentValve.java:70)
  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
  at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:829)
  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.java:598)
  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:447)
  at java.lang.Thread.run(Thread.java:662)
  2012-05-17 15:32:27, 401 INFO [STDOUT] 8247098 [http - 10.92.5.3 - 8280-1]
  
  
  ERROR com.oracle.determinations.web.siebel.SiebelIOClient - <? XML version = "1.0" encoding = "UTF-8"? > < SOAP - ENV:Envelope xmlns:SOAP - ENV = "http://schemas.xmlsoap.org/soap/envelope/" > < SOAP - ENV:Body > < SOAP - ENV:Fault > < faultcode > SOAP - ENV:Client < / faultcode > < faultstring > entry provided is not well formed or does not contain the expected data. (SBL-EAI-00137) < / faultstring > < details > < siebelf:siebdetail = "http://www.siebel.com/ws/fault" xmlns:siebelf > < siebelf:logfilename > EAIObjMgr_enu_0014_14680077.log < / siebelf:logfilename > < siebelf:errorstack > < siebelf:error > < siebelf:errorcode > SBL-EAI-00137 < / siebelf:errorcode > < siebelf:errorsymbol > IDS_EAI_WS_BAD_XML_DOCUMENT < / siebelf:errorsymbol > < siebelf : errormsg > entry provided is not well-formed or does not contain the expected data. (SBL-EAI-00137) < / siebelf:errormsg > < / siebelf:error > < siebelf:error > < siebelf:errorcode > SBL-EAI-00247 < / siebelf:errorcode > < siebelf:errorsymbol > IDS_XMLCNV_ERR_FTLPARSE < / siebelf:errorsymbol > < siebelf:errormsg > fatal error in the XML parser at line 1, column 29147: scheduled end of the tag & apos; AttributeValue & apos;(SBL-EAI-00247) < / siebelf:errormsg > < / siebelf:error > < / siebelf:errorstack > < / siebelf:siebdetail > < / details > < / SOAP - ENV:Fault > < / SOAP - ENV:Body > < / SOAP - ENV:Envelope >
  
  
  note of lease we changed the data type of the fields in the object of the integration component Boolean integration (which are sent to the Siebel OPA) from DTYPE_BOOL to DTYPE_TEXT as in OPM, we could not test the Boolean values. Can we check what values for the OPA to siebel themselves? (before the backup session WFs are called)
  
  A quick response will be a great help.
  
  Thanks in advance!

  The trace of the pile here, it seems that there is an error in the XML passed to Siebel. Is it possible for you to raise an incident with the support of oracle about this? It will make it easier to solve.

  Alternatively, if you look in the newspapers on the side of siebel, you should be able to verify the XML passed to Siebel during recording session. Probably easier to see why XML is incorrect. What may be a little harder to answer, this is what is causing the XML passed to Siebel to be bad.

• CC of Dreamweaver (2015) 'save the files before putting them' post cause long beachball hangs

  I always Save the files before putting them checked in preferences > Site so I can just work on files and press CMD + SHIFT + you download the file without first having to save it. This seems to be problematic in Dreamweaver CM³, particularly with large sites. I'm working on sites where tens of thousands of files and Dreamweaver can't seem to stick with it all... it is maybe the cache issue... do not know, but I had problems with time to hang long beachball of up to 5 full minutes.

  Why wait 5 minutes and not only force-quit you ask? Because it ends up causing more problems and crashes when I open it again. I found that it's faster to simply let DW his vision quest because it is finally the beach.

  Clues as to the best way to handle several huge websites and be able to switch back often and smoothly?

  2010 mac Pro / 16GB of RAM

  Last Yosemite

  Disable enable Cache.

  Access the Site > Manage Sites > click on a site definition.  Press the pencil icon to change.

  Click on advanced settings > local news.  See screenshot.

  

• The session is disconnected

  Is there a way to set the timer for the disconnection of the Session in the collector configuration.

  Hello Bbcstone,

  Unfortunately at this time it doesn't have a way to change the timer logout to log on to the appliance EPSC web INTERFACE.  After a period of inactivity, the user interface will be you disconnect from the security session.   However, you can still log in again and see the status of any work already under way by going to the reports section of the CSPC UI.

  Thank you

  Jarrett

• What happens to the session if Disconnect-ViServer is not called?

  What happens to an active session if Disconnect-ViServer is not called and powershell leaves?

  The problem, in that I am running is with PowershellASP:

  Here, the code works fine: http://www.vmwarescripting.com/index.php?topic=550.0

  But if I add:

  <% Disconnect-VIServer -server $host1  -confirm:$false %>
  

  PoweshellASP then gives this error on the Disconnect-VIserver cmdlet:

   Cannot invoke this function because the current host does not implement it.
  

  Any ideas?

  The problem is actually due to the disconnection-VIServer trying to change the title of the window, which does not support PowerShellASP (I presume).

  You can use this code to disconnect:

  (get-view serviceinstance).Client.Logout()
  

• Save the form before you open the pop-up window

  Can someone share with me the best way to save a form before clicking on a button that opens a popup window? I have a button on a form that opens a pop-up window with a form. Once a user enters data into the context menu, the information is saved, the popup closes and the parent page is reloaded to display the newly added area of report data. B/c that each parent page refresh, any changes the user made before clicking on the button to open the pop-up window is erased once the pages are reloaded.
  
  I currently have a button with a redirect to URL in option ("javascript:openPopup(&FACID.)"). The first function opens a new window (for a fraction of a second), and then a doSubmit ('SAVE') to save the parent page, and then put the focus on the pop up window. This works, but there are a lot of flicker of the page I want to avoid.
  
  Is there a "smoother" way to perform these steps? I understand that the parent page should be provided so that the data is saved, but it doesn't have a difference if I call the doSubmit('SAVE') before opening the pop-up window (in the function openPopup)... I always get the same results.
  
  I have it working now, but I was wondering if anyone knew a better way to do this.
  Thank you
  Tammy

  Hello

  OK - code 'opener.location.href... '. ' may be replaced by 'opener.doSubmit ('SAVE'); "because that should trigger the normal submit on the home page.

  Andy

• Unable to save the session value in the input field for db

  Hi all, I use oracle jdeveloper 11g release2. I'm not able to store session in the DB value. Actually I access to the session value (either x here) while the user logs and filling in the form of entrance to box as "#{sessionScope.x}". It works very well. But when I try to back up the folder DB his throw error saying required attribute 'viewname.x'. The value of x is present in the input area. Yet, its throwing the error. Any idea on this. Am I correctly access the session variable.

  Hello

  What I understand, it's that you have ViewObject based on the entity object this object attribute 'X' view and you must set this attribute with a value in the session scope.

  You can set this programmatic as attribute:

  setX(FacesContext.getCurrentInstance().getExternalContext().getSessionMap().get(sessionScopeVariableName));
  

  You can add this line in doDML() in EntityImpl as:

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation != DML_DELETE)
      {
        setX(FacesContext.getCurrentInstance().getExternalContext().getSessionMap().get(sessionScopeVariableName));
      }
      super.doDML(operation, e);
    }
  

• Save the record before moving on to the next line in the data block

  Hello
  
  Form 10g, I have a block of retail, in the block of retail, I want the user first save the current line and then move to the next line, in the validate_record trigger, I checked the system.block_status = new but its does not work and the user is still able to move around the lines below without saving it in the upper rows.
  
  any tips?

  Ouadi wrote:
  Hello

  Form 10g, I have a block of retail, in the block of retail, I want the user first save the current line and then move to the next line, in the validate_record trigger, I checked the system.block_status = new but its does not work and the user is still able to move around the lines below without saving it in the upper rows.

  any tips?

  Yes. You can make commit automatic when changing the line.

  When-new-folder-instance trigger writing

  commit_form;
  

  I hope this helps...

• Save the session

  Hello

  I am trying to save a dataset with the associated schema by hand without using a vbs script. This could be interesting for the VIEW and the REPORT.

  Is it possible in principle to record a session with the data and the schema?

  Thank you in advance,

  Thomas

  Hello Thomas,.

  There is an example in the DIAdem help system (it has been around for a while) that creates a function "Save Session":

  

  Please note that this function is an example and saves only the files currently open signs of tiara ion. It does not record the status of the Manager calculation, internal variables, camera settings and other items that can be changed by the user in a session of tiara.

  It should do what you're asking, so I think it might be a viable thing to try in your particular situation.

  I hope this helps...

  Otmar

• Save the data before and after the occurrence of a Trigger Condition.

  Hello

  I am worrking on an application that acquires data from 64 channels and performs many analyses.

  Necessary to implement something is recording the data in the event of alarm condition.

  I've implemented datalogging in many previous applications, but this one is difficult.

  I need to save data for a few seconds before and a few seconds after the alarm has occurred in a single file.

  I thought constantly write data to a file PDM and at the same time deleting the old data, until the alarm trigger occurs.

  but I was not able to do, since I have no blocks to remove data from a PDM file.

  I'm looking for the ideal approach to this recording.

  Any help will be appreciated.

  What I have to do this in the past, use of a queue with loss as a circular buffer.  When you get the relaxation, dump you the data in the queue to your file and then save however many data you want after the outbreak.

  For the purposes of the memory allocation, do not use the queue to rinse.  Use rather a Dequeue element inside a conditional FOR loop with a 0 timeout (reading the queue stops when you have a timeout or you read X samples).

• Error message: unable to save this article before you save the header entry

  Hi all

  I'm trying to insert data into the table of okc_k_processes using an API. When I run my application, I get this error message: unable to save this article before you save the header entry. I tried to open the API package body and locate the error but could not find it. How to solve this?

  Thanks in advance.

  3065204 wrote:

  No, there is no trigger on the table. But what he really tell by the error and to save the header entry?

  We do not know your code, and we do not have access either!  So, how are we supposed to know what a particular error message?  You can not save the ticket before you save the header entry is NOT an Oracle error, it's a validation error request that someone who wrote the API set.  We can only guess why you get it.

  Your API call should be to create a detail record and requires that you create a header record.

  The validation is

  • okc_contract_pub.create_contract_process and one of its dependencies
  • pa_interface_utils_pub.get_Messages
  • a trigger on a table.

  run the following

  Select *.

  from ALL_SOURCE

  where the TEXT like '% you can not save this entry before saving the header entry %.

  and you'll probably find where.

• Save the Connect-VIServer session between scripts?

  In order to make the GUI for people who are not used to the command line, we want to look at aid where VBScript code call scripts powershell to work behind the scenes of the HTA.  The only problem is the delay of connecting to VIServer for what the user does.  Say they click on a button for a list of the virtual machine, it could trigger a ps script which collects and posts this info using the Clipboard.  After that, however, that the script is closed and therefore the session.  The button depending on whether they click should also have a sign at the beginning of the script, accompanied by another 10 seconds to wait on the connection.  Is there a way to store/save the session so that we can connect onload of the code of the road and all the following scripts could continue with this session?

  Thank you

  Josh

  Keep the open sessions is not a good idea imho, and the maximum number of sessions is limited.

  Have you tried all the known solutions to accelerate the PowerCLI process?

  • Disable the automatic detection of proxy in powershell.config
  • Run the command ngen once to make the first cmdlet faster. See How to speed up execution of the first PowerCLI cmdlet.

  Another possible way is to use a central script that runs continuously in the background and you submit orders from your application to this central script through a sort of semaphores (this could be simple files in a specific folder for example).

  Update: there used to Save Session and Load-Session cmdlets in previous versions of PowerCLI, but these were dropped.

• With the code to run the session timeout

  I saw this problem asked and addressed on many other furums, but nobody came with a response, yet.

  I am trying to disconnect a user and end their session when they leave my site. How can I know when they leave my site? The only way I know is to wait a few seconds, and if they make a request to the server, they are gone. Disconnect them.

  I tried to just do a < cfajaxproxy > call to a cfc that returns just their application.sessiontimeout to 5 seconds, but it does not work. The session has no expiration time. I need to connect the outside user and the disconnection notice in a newspaper on the server and a logfile (not my idea. "This is the requirement of the customer.) I can get the cfc that I call by the tag < cfajaxproxy > to run log entries and I could kill the session here, but I need to give the page time to update and see if the user requests a page of my site or on an outside website. The problem is that if I do those things within the time of announcement of EFA execution with a counter or loop dlay, the page is not unload until the end of the call of CFCs. So, no matter how long lasts the delay, the session is already cleared bfore that loading of the next page.

  It's the old problem of want to logoff user when they leave the site, but not having is not a way to know where is located the landing page or the ability to delay a server action while the browser passes to the next query. If I can get a delay at work, the user can request a page on my site and I can reset the session before timeout. If they go to another site, eut session outside and they disconnects.

  Any help will be GREATLY appreciated. I spent days on this.

  Thank you

  CFGunny

  I had completely forgotten this post. I know it is very old, but I thought I'd post the real answer. The key was I needed establish if the user has left my site, unloading not only the current page and disconnect them if you leave my site. It is in fact not possible because there is no way to determine the URL TO which the browser will due to browser security restrictions, so I don't know if it's going to another page on my site or on another site. It's a little more complicated that just end a session when the page unloads. I didn't disconnect the user or kill their session each time that an empty page.

  The answer was to write a 'onUnload()' script that records the time of the unload event and the user's session ID (I actually used our user ID and put it in the database) and write a scheduled task that verifies all entries in the database against the current time and disconnects any users having a longer period, say 30 seconds. In order to avoid disconnecting all users (running every two minutes with a maximum time of 30 seconds, return all users), I wrote a script block in the onRequestStart in Application.cfc that checks the database for a record for this user and function, if the record exists, compares the time registration at the present time (now()). If the difference is greater than 30 seconds, the recording is marked and, if still connected, the user is disconnected and have to log in again. This ensures that the user is disconnected after thirty seconds, because the scheduled task runs only every two minutes. If the time is less than 30 seconds, the user continues without interference. Thus, if the user went to the site for more than two minutes, the scheduled task handles the database and actions disconnect. If the user is off-site for more than thirty seconds, but less than two minutes, the script in the onRequestStart function does the work.

  Thirty seconds time was a requirement of the customer and gives enough time for the next page to load, even if the user is on a slow network, but is short enough so that the user probably not going to another site, first. This method also allows the detailed collection of metrix, including the user, how many times they visit, how long they stay (on each page and an agregate), what URL, they came, etc., as well as normal metrix on-site as what pages they visited. These metrix became very important to the customer, is an agency of the federal Government and that they must justify their existence every year to get funding for next year, which part was my paycheck.

  I apologize to not include the code, but I left this project a year ago and do not have the code, not more. If I did it again, I'd probably write it a little differently (cleaning and CFScript), anyway. I hope this helps someone.

• On facebook, I'm suddenly in the sessions 'invited '. Want to go back to 'no comment '. Can you help me, please?

  Failed to save the session invited other photos

  We cannot help with the Facebook site or approx. Try https://www.facebook.com/help