records of three ghosts 'my music '?

Similar Questions

• I would like to remove the automatic renewal for three months of Apple's music essay. How do I do that?

  I did the free trial of three months 'Apple music' a week ago. I don't want now, and I don't want that it is automatically renewed at the end of three months. How to handle this in my account? It doesn't seem to be a zone of disengagement.

  Click here, follow the instructions and wait until it expires.

  (139634)

• How can I add a 'Record number' column in a folder that contains the music?

  How can I add a 'Record number' column for my music files?  It does not appear as a column I add when I right click on the folder in its display of details.  Zune program uses this file attribute.

  I learned from this thread (http://social.technet.microsoft.com/Forums/en/w7itpromedia/thread/47e46e5a-63c0-4a92-b39d-64ea9a07953e) Windows Media Player 12 IS NOT only an attribute of disc number!  Incredible.  Zune has it, and it works fine.   Come on Microsoft, please join us in THIS century it please?

• Is a three ping taken grounded from the computer?

  Is taking three ping on the power cord to the ground the MacBook Air (mid-2013) 10.10 I use?

  I read that cable to a laptop computer, printer with a record of three ping, 'grounds' the computer.

  Would like to know that Apple has taken this problem of grounding into account in the design but don't

  find this information.  Would be very happy if someone could explain MacAir, computer laptop, put in the Earth

  information simply.

  Thank you for your time and your consideration.

  Yes. It is connected to the Earth.

• Stats of different song in 'My Music' to ' for you, etc...?

  I noticed this info on the albums and songs when playing or looking for an album of music from the Apple does not match when the music is recorded in my music. For example, I recorded Album A in my music, favorite it and also give it a rating. Navigation section for you I was recommended Album A listen - clicking through the album and plays it, I see that it is checked (which indicates that it's been saved) but that it was not favorite. In addition, when you listen to music in this way, the column 'play' is not refreshed in my music even if you listen to all. Apple music counts those albums as being distinct then? If I rate/favorite something in my music, is it not considered in Apple music as a whole?

  Hello

  When you play a piece of music, you either play your own disc hard or streaming from your library of music to iCloud. They use your iTunes library.itl in your iTunes folder where are stored the sides and the game counts. If you play for you or New, you stream music from Apple Server, so play counts are not saved.

  Jim

• Can't see my music after upgrade

  I have upgraded to iOS 9.1 and now I can not accessmy music when I open the music app all I see the picture on my screen, a lady with headphones. Why is this?

  

  Hi CutieZee,

  The resources below explains how to use the new music app.  You tap on the option "Start 3 month free trial" below?  If so, maybe it's why you see the screenshot above.

  With the help of the new music app
  https://support.Apple.com/en-us/HT204951

  

  

  When you open the music application you will see the option to start a free trial, three months Apple music. * When you join music Apple, you get a whole world of music - all of our 30 million songs and all your songs - in a library, delivered to all your devices.

  You can find all your music in the my musictab. The tab For You has music which is handpicked by experts for you, and the new tab shows you all the latest hits. On the Radio tab, you can listen to the Beats 1, our radio station in the world first 24/7 and stations of Apple music on demand. And you can get the content directly from your favorite in connectartists.

  With your subscription to Apple's music, you can Add songs to the catalog of Apple to your library and the save for offline listening.

  Apple music features vary by country.

  

  My Music & Playlists

  The My Music tab makes it easy to navigate through all of your music, everywhere where it is-on the iTunes Store, a rare import CD or your subscription to Apple's music. Whenever you add a song, album, or playlist, keep us at the top of my music in recently added. Press the category picker (artist, album, etc.) below recently added to sort your music by artist, albums, songs, or other categories.

  Play your music

  

  When you play a song, you see the Miniplayer at the bottom of the screen. You can continue to browse other titles to find the next perfect song.

  

  Or you can tap or slide up on the Miniplayer to see the display of current playback and controls. Press on the in the upper left corner or sliding down to close the now playing screen.

  If you want to listen to the entire collection of the artist of the music that you have saved in your library, find the artist in my music. To the right of the name of the artist, type , then press Add in the next place. If you want to listen to all the songs of the artist, even if you don't have their music in your library, ask Siri to play all their songs.

• What to do to bring the music to windows media player so that it can be heard as well as my voice on a equal footing.

  Hello everyone,

  I would like to know what I have to do during a recording session to bring up music from my windows mediia player so that it can be heard on a equal footing with my voice. Right now, my voice about the prerogatives the track of music where the voice comes in strong and the track comes in weak. Thank you very much in advance for your help. Peace.

  Hello

  · What version of Windows media player you are using?

  You can check the link below and depending on what you're trying to do there is a lot of different plug-ins you can download according to your need.

  Link: http://windows.microsoft.com/en-US/windows/downloads/windows-media-player/personalize

• Voice WAV format recording is unacceptable

  My test recording about 1 min busy about 9 MB of space. This is unacceptable.

  If the main purpose of the rocket + was voice recording, I agree with you.  Sony voice recorders last $ 40.00 to $ 300.00 depending on the feature set, you need.

  The main goal of the rocket + is a multimedia player, including music files.  In addition to playing music you also get video playback, FM Radio playback and recording, book Audio support, subscription music Service support, Voice Recording and photo looks a.

  Add the ability to add up to 32 GB extra memory via Micro SD card for the price of $65.00.

  It's a very good deal.  It is not a question of 'will' share of Sandisk, it was a typical game for money.  For most of us, we bought a 'player' for media playback.  Registration is a nice feature that we have on the side.  That is why it is unfair to compare the "rocket" + with other devices which primary is used to record voices.

  It has always been true "all-in-one" devices rarely perform each task as well as a device designed for a single application.  Try to cut a roast with a Swiss army knife.  It can be done, but a quality knife cutting will certainly do a better job.  However a carving knife is as well a work at the opening of a bottle like a Swiss army knife.

  The rocket + is a Jack of all trades but master of none.  Audio playback is it is primary, and he does it with the best of them.  Family Fuze and Clip players have equal playback quality or exceeds other media players offered at 3 times the price.

  How do you think that Sony would react if you nailed Sony because their recorders of the word, not to manipulate playback gapless or will not support .wma Rhapsody subscription files?

  I think that you will get a similar response.

  I bought players Fuze and Clip specifically for affordable quality audio playback, and for this product excels.  With a rocket 4 GB + 16 GB card and I have a 20 GB player under 100 dollars.  Please tell me where you can get a 20 GB flash drive for under a benjamin.  I doubt that you will find.

  Now if only Sandisk address some of the GAL navigation and press the issues of sensitivity, I would be in heaven.

• 8 GB Clip - recording FM, how many hours?

  I expect to buy a 8 GB Clip after a first study of the "rocket"! I'll use any Sansa I chose to record a three-day seminar which is also broadcast on a channel FM at the Convention Center. I have recorded about 21 hours in total, approximately 7 hour increments. I'll stay out of the city and will not have a computer available for download that I have saved every day. I will reload with a wall charger to the hotel every night.

  I did a search here from the Community (loads of information here, thanks) and found that with the "rocket", a person was "able to save a little more than 22 hours - 7." ++ GB of FM with memory internal. »

  It seems logical that the 8 GB Clip should be able to do the same thing? Can someone confirm this assumption for me?

  Thanks, I appreciate the support offered here!

  1 hour of recording on the recorder of the Word takes about 180 MB.  Registration is 24Khz, 16-bit, 384 kbps mono .wav.

  Recording FM is stereo at 768 Kbps, so those who will be twice the size.

  You should have no problem with the ability, but I'm not sure about the battery life.  Maybe take a small pack of USB battery as a backup?

• Test the microphone works, but I can't save with recorder to the computer.

  I tested the microphone under voice identification. He says he works. When I opened the computer of the recorder of the window and click on 'start recording' nothing records. Also in my music software Sonar, the microphone no longer records. I went to 'troubleshooting' and the final message said: "the volume on the unit is low." Not fixed. How to increase volume for a microphone? I understand how to increase or decrease the volume of the speakers via the speaker ikon down in the corner, but you can never asked me to change the microphone volume. How do you do that? (If that's the problem!) Thank you. Operating system is Vista.

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Try these steps and check:

  a. Click Start, open Control Panel.

  b. click sounds, click the recording tab.

  c. click microphone, and then click Properties.

  d. under the controller information, check if the correct sound card is selected.

  e. click on the advance tab, under exclusive mode uncheck both boxes.

  f. click on apply, then ok.

  Check if it helps.

  Method 2:

  Try to update the latest drivers for the sound card and then check that if it helps, here is the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• My photos and music libraries are mixed up and can be arranged

  I wanted to improve the performance of my computer to defragment my hard drive. After that I did, my photos and music mГЄlГ. I tried to put all the music in the music library and all the photos in the photo library of the way they were before, but they keep automatically mix up. My picture library has 5 sites, video library has 3 sites, almost all my photos and music are doubled in all three libraries: Photos, music and videos. How to organize my files?

  Hello... I would like to start by opening 'explorer' and in the highlight of the left (navigation) pane 'Libraries' right-click and select "restore default libraries." After that, they're still a mess libraries may need to rebuild, but one step at a time... Ric.

• the Windows media player 12: reason why the music projected into a playlist but not in the library are saved?

  I recently downloaded music and recorded in my category of music in Windows 7. Normally when I do that it records automatically on Windows Media Player 12. This time, it records to a playlist, but not at the library. I did not any changes to settings with Win Media Player 12. I searched online help regarding my question with no luck. Any information would be helpful. Thank you for your time

  If you already haven't, physically move your songs in the same folder, delete your old library and build a replacement.

  See you soon,.
  Jerry

• Record Full Duplex and ADR Workflow in Premiere Pro CC

  Hi, I use CC v10.3.

  Trying to find best workflow for ADR only not sure if I need to do this first or hearing.

  I'm unable to mute the audio channel that I record in first that causes a signal delayed voice back to the screen. The talent is to hear the microphone input AND the delayed signal. Is there a way to re - route the output of the channel I record to so it will be no power to the monitor when recording? In Pro Tools, I just mute the channel, but when I do it in first, it will not register. I also tried to play the channel that we replace and even once, it will not record solo.

  I use a mixer with an additional bus (running the entry to 3-4 mike hand out is 1-2 Try to find a way to monitor the mic input and output channel (as if recording on a bed of music you want to listen to everything by expressing sound) without hearing the voice channel I record on.

  Any suggestions?

  The input/output audio M-Audio Profire 2626 and the mixer is a Mackie 1402-VLZ-3

  Thank you

  RG

  If you go to the Premiere Pro > Preferences > Audio and input mute during recording of timeline, Select the check box is only help?

  

  MtD

• Redundancy of the Normal ASM - three stores, three groups of failure

  Hello

  I have a question about groups of failure in ASM. I have an ASM diskgroup with normal redundancy and records of three different preparations. Each storage disks are in separate groups of failure (see screen below). I know what ASM allocates to a point as it allocates a copy of copy and the primary mirror and mirror copy is placed on a different disk that is part of a group of different failure. And it is understood for the configuration with two storage (or controllers) and two different groups of failure. But what with configuration where are three storages and failure groups? My question is: If I failed three groups if new extensions are allocated are mirrored are placed on the other two discs are it is a part of a group of different failure? Or maybe this kind of configuration (with three groups of normal redundancy ASM failure) is not supported?

  

  I know what ASM allocates to a point as it allocates a copy of copy and the primary mirror and mirror copy is placed on a different disk that is part of a group of different failure. And it is understood for the configuration with two storage (or controllers) and two different groups of failure. But what with configuration where are three storages and failure groups? My question is: if I have three groups of failure, if new extensions are allocated are mirrored are placed on the other two discs are it is a part of a group of different failure? Or maybe this kind of configuration (with three groups of normal redundancy ASM failure) is not supported?

  No matter how much you failgroup. Normal redundancy requires at least 2 Failgroup.

  Oracle will allocate primary measure in a failgroup and place the mirror of the scopes in an another failgroup.

  The order does not matter since you always have a copy in a different failgroup.

  See example below (d = data extended)

  FG1 |   FG2 | FG3

  ========|===============|=========
  

  d1      |   d1_copy:

  |   d2          | d2_copy

  d3_copy |               | d3

  When you create a Diskgroup without specifying the failgroup, Oracle will automatically create a failgroup to each diskgroup. So, if you create a normal with normal redundancy Diskgroup and ASMDISK 10, ASM will create 10 failgroups.

  You have 3 warehouses and 3 Failgroup

  If you loss storage (h/f) ASM will tolerate because you measure mirror in any other failgroup (h, l, square).

  If you loss both storage (h/f) or two different storage disk/controller at the same time ASM will not tolerate. (Need to restore a backup database)

  Your point of failure: you must make sure that the two storages/controllers/disks will still be available.

  If your concern is: can I have a situation where two storage can do fail (or cut) at the same time. Then, you need high redundancy, because this configuration will tolerate you two storages loss (h/f) at the same time and Diskgroup will remain active.

• Three tickets per page with auto numbering to 300 tickets ticket

  I want to print 300 tickets with unique sequential ticket numbers. I have three tickets per page. Is it possible to do it automatically?

  I do tickets using a number of list generated in Excel and saved in a text file. You can do this in a number of ways.

  Easier is to set up the master page with three frames of text related to contain the number and define a paragraph with an option of Dungeon style to start each paragraph in the next section, then use the file > place... and the automatic text placement.

  You can also implement models of fusion of data (whether for one record per page, which requires three numbers each record for three of the tickets or for a several records per page merge, which would use one number per line) and the tickets in this way.

  If you google, you probably can find several previous discussions where this is discussed in detail by me and several other users.