Test the microphone works, but I can't save with recorder to the computer.
I tested the microphone under voice identification. He says he works. When I opened the computer of the recorder of the window and click on 'start recording' nothing records. Also in my music software Sonar, the microphone no longer records. I went to 'troubleshooting' and the final message said: "the volume on the unit is low." Not fixed. How to increase volume for a microphone? I understand how to increase or decrease the volume of the speakers via the speaker ikon down in the corner, but you can never asked me to change the microphone volume. How do you do that? (If that's the problem!) Thank you. Operating system is Vista.
Hello
I suggest you to follow these steps and check if that helps.
Method 1:
Try these steps and check:
a. Click Start, open Control Panel.
b. click sounds, click the recording tab.
c. click microphone, and then click Properties.
d. under the controller information, check if the correct sound card is selected.
e. click on the advance tab, under exclusive mode uncheck both boxes.
f. click on apply, then ok.
Check if it helps.
Method 2:
Try to update the latest drivers for the sound card and then check that if it helps, here is the link:
It will be useful.
Tags: Windows
Similar Questions
-
original title: Chipmunks in my computer!
I have 2 problems. First of all, I can't save it as Narrator on PowerPoint. He says that I don't have a microphone. My microphone works because I can save otherwise, but there is a problem because I look like a squirrel! I put the voice until the lowest level I can.
I guess it's a problem with the microphone, which is probably broken somehow. If it is a taken as opposed to a micro USB microphone, you can get a micro usb to a friend (if possible) to test if it works using the microphone or not.
I say this because I had a microphone jack and he also had problems, as I've never had a problem with my USB microphone.
-
Windows 7 says I need to install this driver for the scanner to work, but I can't.
As for all the HP drivers, simply visit the HP support site http://support.hp.com/, enter the model number in the search box, click on the link drivers and you're there. http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3442754&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3442750
-
Have you had to face the problem, that there is no an error but just can't open Lightroom app on your computer? I have a photoshop, but not Lightroom work and plan creative cloud... Almost all tried, nothing does not help and may not always know where the problem...
Windows. I just did a cover on my pc and reinstalled cloud once again, now everything seems ifne, thank you
-
Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add or drag it happens immediately windows crash, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add .mp3 files.
I had Windows 8.1, 2.4 GHz, 6 GB of RAM. How to solve this problem?
Fixed a problem when converting the mp3 file. WAV...
some poor Adobe Premiere Elements if there is for example simple bug in the software. Waste of money for this software.
-
I have created a VPN connection and it worked but you can't see how to remove Windows 7.
Delete the VPN connection
I have created a VPN connection and it worked but you can't see how to remove Windows 7. I tried rt-click but no delete option.Open network and sharing Center. On the left side, click on change adapter settings. You will get all VPN connections that have been created and you can delete what you don't need.
-
I have an old Photoshop CS3 that was installed on a desktop computer that has crashed and is still not bootable. I now have a new office with 10 windows and I installed it and it works. Activation is dimmed, but I can't save. It is said there is no internet connection, which is not correct. What should I do?
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and disable your firewall
-also clear the cache of your browser if you start with a fresh browser
-check the file hosts for blocked entries https://forums.adobe.com/thread/1912777
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
- or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
I just got the CC but I can't access with me ID. "Assinatura não encontrada" (not found) how can I do?
Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html
-
I can rotate the pages, but I can't save it.
Hi, I have Adobe XI, my problem is I can rotate the pages, but I can't save it... I try: view-> tools-> (click on the right button)-> right turn...
Oh and if you want to say 'Adobe Reader' rather than ' Adobe Acrobat Pro/Standard ', you cannot rotate pages, it is only in the paid software.
-
I have recently started to receive bank statements in the form of PDF files - can open and read files fine, but how can I save the files to a folder on my computer?
The best way is to right click (Ctrl-click on Mac) on the url that you use to save the file on your computer. If you have a pdf file open in your browser, move your icon to the bottom of the screen, there should be a contextual toolbar. Click the floppy disk icon to save the file.
-
I can't find my code redemption cs6 and I just bought a new computer because my old one no longer works. How can I get my photoshop on this computer? All my products are registerd with a serial number
For CS and CS2 activation servers stopped working and have been taken down. You will need to take a look at this link for your question: https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
Benjamin
-
I own CS3 and I had a hard disk crash. As I had no chance to 'disable' CS3 before getting a new computer, I can't save CS3 on my new computer. It just error. What can I do? I can't put in a support ticket.
Contact via Live Chat customer care officer.
Nancy O.
-
original title: Wireless router problems
My Belkin router has stopped working the other day, so I tried the usual stuff (turning on an etc) in the end rang Belkin and after about an hour the router started working again, but would go only on the iiNet connection site! Go figure, not even with them. The woman to the Belkin told me to ring my ISP I did, and they got me online, however, my printer, the laptop and the iPhone is no longer will connect wireless. They were all working perfectly before the router dropped out.
I went through all the procedures that several times. Uninstalled and reinstalled the printer and the router... still does not work.
The printer can not just to find the wireless network. The test report said that everything went except the SSID, which has been a FAILURE. How can this be when I haven't changed the
SSID?
I've updated as well.
Hoping really frustrated, can someone help!
Thanks in advance!Hello
1 are there any changes or updates made on the computer before the show?
2. What is the exact model of the router number?
3. do you get an error message? If Yes, what is the full and exact error message?
4. what operating system is installed on the computer?
Method 1:
Check the link and try to run the troubleshooter to check if it helps.
Windows wireless and wired network connection problems
Method 2:
Check out the links and check if that helps:
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
The link applies to the Windows Vista and Windows 7 operating system.
Problems of network with a router in Windows XP
-
Cannot use the internal mic. External microphone works but the sound is not very loud.
Original title: microphone
My microphone internal hp no longer works. If I plug an external microphone into the socket, it will work, but the sound is not very loud.
Hello
1 how long have you been faced with this problem?
2 did you recent hardware or software changes to your computer before this problem?Step 1: Try to run auto Locksmiths and check.
Reference: http://support.microsoft.com/gp/hardware_device_problemsStep 2: Set the default Microphone.
a. go to Start and click on Control Panel.
b. click on her, then a new window will open.
(c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
d now check if the Microphone is listed there and right-click on it and choose Activate.
e. Select the Microphone, and then click "set as default"Reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/record-soundThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
HP Pavilion 15 laptop touchpad works but I can scroll or zoom or double click
I can use the touch pad to move, but edge kicks do not work so I can't change an app from the app and I can't operate zoom button or scrolling is? any help or ideas
Hello
Try the following.
Download the latest installer driver Synaptics, on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63975.exe
Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.
When this has completed, restart the laptop.
When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation. When this has completed, restart the computer again.
When windows has reloaded, you may now need to configure the options require you (Pinch Zoom, edge slides etc.) for the touchpad - open windows control panel, open the mouse, select the tab settings of the ClickPad, then click the button settings ClickPad.
Kind regards
DP - K
Maybe you are looking for
-
Graphics card need help for the severe game for WoW - Lag
Hi, here is my card: HP Pavilion, 8 GB of Ram, Intel Core 2 Quad CPU Q8400 2.66 GHz (4 processors) Windows 7 Home Premium 64-bit DirectX 11 Card: Intel G45/G43 Express Chipset 1695 MB 1920 x 1080 (32 bit) (60 Hz) Please let me know which card should
-
How to start the program without the run button
How can I start the program from the moment I opened the vi? without the use of the race. Thank you
-
my hp Pavilion 15 notebook pc is getting more heated while using it even for five minutes and he gets are cooled in mode 'sleep' when it is completely recharged using 1 and half an hour, that the battery runs out. Please tell me the steps yo control
-
My McAfee subscription has expired, and since then every time I turn on my computer a box pops up saying that McAfee could not open and reinstall. So I just paid for another subscription and it still does the same thing and every time that I go to wh
-
A Nano transceiver can be shared for keyboard Arc and 6000 wireless mouse?
Hello I have two Microsoft wireless products: an Arc keyboard and mouse wireless 6000. They have both a wireless transceiver Nano using 2 USB Sockets. My question is: a Nano transceiver can be shared? Thank you! Jim Wang - MVP Dynamics CRM - http://j