Recover data using eSATA
Hello
I have a hp pavilion dv5 1135ee death with an eSATA connector, can I get a cable and transfer the data from the laptop dead on a new use eSATA?
Note: I read somewhere that I should use a hardware box, I bought 2 of them on ebay (sata and IDE) and the two do not match.
Thank you
No, this adapter connects directly on the hard drive, no necessary box, this is a temporary way to get your data out of the car, I do not recommend to use it all the time.
I recommend it because it works with most all hard drives, enclosures must be the one appropriate for your hard disk, its harder to find the good speaker.
Tags: Notebooks
Similar Questions
-
Recovery of recovering data using third-party SW datastore backup
Hi all
Disaster (destroyed camera VDR and its CIFS data store), is it possible to recover the data store VDR previously saved by Tivoli Storage Manager (or some other backup SW), and then to redeploy camera VDR and restore virtual machines of recovered data store? The 'new' camera VDR will make something out of these data?
Information vital in camera VDR or is the catalog on the CIFS data store enough to re-create the backup information?
Thanx
-jv-
Yes, the VDR data store is football. If you are using a new camera VDR, you need only add as a target and start a health check. After that, you see the restore points.
-
Recovering data using rownum cloum
Hello
We wanted to table it contains 6216 total records
I want to recover the data using rownum column between 6186 and 6126
How can I write the query to retrieve the data?
Thank you
Regarding
A Z
Published by: user3308982 on March 26, 2011 14:09the custom of above query works. Try this, you will get the desired result, you want
select * from (select p.*, rownum rnum from (select * from test) p) where rnum between 6189 and 6126;
example of output
SQL> run 1* select * from (select p.*, rownum rnum from (select * from test) p) where rnum between 15 and 30 ID RNUM ---------- ---------- 10 15 10 16 10 17 10 18 10 19 10 20 10 21 10 22 10 23 10 24 10 25 ID RNUM ---------- ---------- 10 26 10 27 10 28 10 29 10 30 16 rows selected.
Reference:
http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:127412348064Published by: rajeysh on March 26, 2011 17:09
-
Is it possible to recover data using the Eloqua API web service for submission of form?
I want to recover the data of contact of a form. I couldn't find examples on the webhelp API, and therefore, do not know if this is possible.
Hello Shashank!
Yes you can certainly do with the API. You must save the data report to send a form as a saved report. You can then use Eloqua DTS (data transfer service) wsdl to generrate a url that is a link to the report. Your system can then consume the URL and get the data in the report.
The applicable methods are
Overview of the operations data Export
I hope that helps!
If you want more etailed information please submit a ticket to support, and we will be happy to help you.
Best regards
Dave Seaton
-
Recovering data using SQL SERVER
Hello
We migrated an environment where Oracle has been store relational data, to one where it is SQLSERVER. I'm trying to load the relational source data into Essbase using rule files. (Nothing fancy) We are on 11.1.2.1
My rule file Essbase, which in SQL embedded in it, returns the numeric columns apparently valid, but rejects essbase each records as if the numerical value was a value of text, for example, he says "Member 12345.67890' not found.
View SQL SERVER sets the numeric columns (Numeric (38.5), null).
Someone at - he met before & can help?
Thank youYou must validate your definition of the rule of load, something pushed and charge State treats the data as members of a dimension column.
-
Recovering data using subquery
Hello
I have these tables in the schema of my HR
He demanded of me as an exercise: -.SQL> desc employees Name Null? Type ----------------------------------------- -------- -------------------- EMPLOYEE_ID NOT NULL NUMBER(6) FIRST_NAME VARCHAR2(20) LAST_NAME NOT NULL VARCHAR2(25) EMAIL NOT NULL VARCHAR2(25) PHONE_NUMBER VARCHAR2(20) HIRE_DATE NOT NULL DATE JOB_ID NOT NULL VARCHAR2(10) SALARY NUMBER(8,2) COMMISSION_PCT NUMBER(2,2) MANAGER_ID NUMBER(6) DEPARTMENT_ID NUMBER(4) SQL> desc departments Name Null? Type ----------------------------------------- -------- -------------------- DEPARTMENT_ID NOT NULL NUMBER(4) DEPARTMENT_NAME NOT NULL VARCHAR2(30) MANAGER_ID NUMBER(6) LOCATION_ID NUMBER(4) SQL> desc locations Name Null? Type ----------------------------------------- -------- -------------------- LOCATION_ID NOT NULL NUMBER(4) STREET_ADDRESS VARCHAR2(40) POSTAL_CODE VARCHAR2(12) CITY NOT NULL VARCHAR2(30) STATE_PROVINCE VARCHAR2(25) COUNTRY_ID CHAR(2)
View the last_name, name of the Department, and the salary of an employee
including salary and commission for wages and the commission of any
employee location ID 1700.
I wrote the following code
Someone can correct me because some lines have to be retrievedSQL> select e.last_name,d.department_name,e.salary from employees e 2 join departments d using (department_id) 3 where (salary,commission_pct) 4 in (select salary,commission_pct from employees 5 where department_id in 6 (select department_id from departments where location_id=1700)); but no rows selected
Hello
VDH says:
In this issue I should use all is this true?No, you should not use EVERYTHING in this problem.
Everything would find employees who had the same salary and commission like everyone ELSE in the given Department.
This problem concerns employees who have the same salary and commission than ANYONE in the Department. -
How to recover data using regexp_like
Hi all
I have to use the function regexp_like on our books, please let me know how to use in this situation.below is sample data.
If I pass the Department number 2 result shows id 1id Name department 1 A 3~2~1 2 B 14~10~3 3 C 22~7~6 4 D 4~5~9
14-> id 2 are coming.
22-> id 3.
Kind regards
Rajasekhar
Published by: SuNRiZz68 on April 27, 2009 07:30Hello
Just add: WHERE INSTR ('~ ' | Department |) '~', '~' || : by | '~') > 0;Cordially Salim
SQL> var par varchar2(20) SQL> exec :par:='1'; Procédure PL/SQL terminée avec succès. SQL> WITH t AS 2 (SELECT 1 ID, 'A' NAME, '3~2~1' department 3 FROM DUAL 4 UNION ALL 5 SELECT 2, 'B', '14~10~3' 6 FROM DUAL 7 UNION ALL 8 SELECT 3, 'C', '22~7~6' 9 FROM DUAL 10 UNION ALL 11 SELECT 4, 'D', '4~5~9' 12 FROM DUAL) 13 SELECT * 14 FROM t 15 WHERE INSTR ('~' || department || '~', '~' || :par || '~') > 0; ID N DEPARTM ---------- - ------- 1 A 3~2~1 SQL> exec :par:='22' Procédure PL/SQL terminée avec succès. SQL> WITH t AS 2 (SELECT 1 ID, 'A' NAME, '3~2~1' department 3 FROM DUAL 4 UNION ALL 5 SELECT 2, 'B', '14~10~3' 6 FROM DUAL 7 UNION ALL 8 SELECT 3, 'C', '22~7~6' 9 FROM DUAL 10 UNION ALL 11 SELECT 4, 'D', '4~5~9' 12 FROM DUAL) 13 SELECT * 14 FROM t 15 WHERE INSTR ('~' || department || '~', '~' || :par || '~') > 0; ID N DEPARTM ---------- - ------- 3 C 22~7~6 SQL>
-
How to recover data for submission of form using REST or SOAP API
Hi Topliners,
Can someone let me know how to recover data using REST or SOAP API, for example, also I need to know how to delete some data from form submission using REST or SOAP API for submission of form. Please answer I need to implement in one of my projects.
Thanks and greetings
Angela
See REST API - to access form data REST API - Documentation for kernel objects
Delete only is not supported via the API.
-
Extract XML data using XML table NULL recovery
Hello
I use XMLtable to recover data using XMLtable
XML
"< env:Envelope xmlns:env = ' http://schemas.xmlsoap.org/SOAP/envelope/ ">
< env:Header > < / env:Header >
< env:Body >
" < = Xmlns:ns1 CreditBureauResponse ' http://www.example.org "xmlns =" " http://www.example.org ">
< ns1:Body >
< ns1:MGResponse > & lt; MGResponse xmlns = "urn: crif - messagegateway:2006 - 08-23" > & lt; U2:AUE_RES xmlns:u2 = "urn: AUE" > & lt; U2:response > & lt; U2:CBApplicationId > 123456789 & lt; / u2:CBApplicationId > & lt; U2:ProviderApplicationNo > 123 & lt; / u2:ProviderApplicationNo > & lt; U2:PreviousPhase > D & lt; / u2:PreviousPhase > & lt; U2:ActualPhase > D & lt; / u2: ActualPhase > & lt; U2:ApplicationDeleted > 0 & lt; / u2:ApplicationDeleted > & lt; / u2:Response > & lt; / u2:AUE_RES > & lt; / MGResponse > < / ns1:MGResponse >
< / ns1:Body >
< / CreditBureauResponse >
< / env:Body >
"< / env:Envelope >.
I would like to know where I am going wrong
SELECT x1.*
OF tmp_xml_aue t.
XMLTABLE (XMLNAMESPACES ('http://schemas.xmlsoap.org/soap/envelope/"as"env","http://www.example.org"as 'ns1", default'http://www.example.org'), )
' / env:Envelope / env:Body / CreditBureauResponse' T.OBJECT_VALUE by the WAY
columns MGRESPONSE xmltype PATH "ns1:Body/ns1:MGResponse/text()") X 1,
XMLTABLE (XMLNAMESPACES ("urn: crif - messagegateway:2006 - 08-23' as"v1", default" urn: AUE' '), ' / MGResponse/AUE_RES ' PASSAGE xmltype (DBMS_XMLGEN.convert (X 1.) MGRESPONSE. GETCLOBVAL(), 1))
columns CBAPPLICATIONID varchar2 (15) WAY "response/CBApplicationId.
) X 2;
Hello
I saw your question and I hope that the link below will help you solve your solution:
https://Oracle-base.com/articles/Misc/XMLTable-query-XML-data-from-SQL
If there are problems more made me know I'll like you the exact solution for your query.
Kind regards
Vinoth.
-
Help SQL - recover data by using the assessment Conditions
Hello
I'm a first time poster so please let me know if I'm in the wrong forum or that you have not provided enough information.
I'm trying to retrieve data from a table called BACKUP_SCHEDULES. The table has a column for each day of the week, with the following values: null, 0, or 1. Zero would be for level 0, 1 for level 1 backups and "null" for any backup. We have an another table called BACKUP_STATUS that lists the databases have been backed up successfully for the day. I am trying to recover data where it lists all the databases, if saved or not, as if it falls a day where the backup did not run that the result set appears, that is) Monday column has the value "null" to the "orcltest" database, then it will list as a column in the result set (to request backup) as "n/a".
Right now I have a set of results as below:
Database Status Backup date Day of the week orclprd S January 31, 2014 Friday orcltest orclqa S January 31, 2014 Friday The above table shows that 'orclprd' and 'orclqa' were correctly backed up for Friday. The orcltest does not show anything because a backup did not run. What I want to do is to compare the tables BACKUP_SCHEDULES and BACKUP_STATUS to demonstrate that it has never a backup scheduled on Friday to "orcltest".
Below is an example of what I want to show:
Database Status Backup date Day of the week On-demand orclprd S January 31, 2014 Friday Yes orcltest NO. orclqa S January 31, 2014 Friday Yes As I said, the BACKUP_SCHEDULES table has a column for each day of the week and the question of if a database backup is scheduled on one of these days. I know that's probably not that clear in my writing so let me know if you need more examples.
Any help would be greatly appreciated.
Thank you
Frank
If you want to use your query, then check out the below query which I modified
SELECT DISTINCT LOWER (dbname) dbname.
To_char (null) status,
To_date (null) backup_date,
TO_CHAR (NULL) 'DOW', 'NO' TO THE REQUEST
OF backup_schedules
WHERE dbname NOT IN (SELECT LOWER (s.dbname)
OF s backup_status
WHERE TO_DATE (backup_date, 'MON-DD-YYYY') = TO_DATE (SYSDATE, ' DD-MON-YYYY ""))
UNION ALL
SELECT LOWER (dbname) dbname,
status,
backup_date,
To_char (backup_date, 'Day') "DOW,"
'YES' ON DEMAND
OF backup_status
WHERE TO_DATE (backup_date, 'MON-DD-YYYY') = TO_DATE (SYSDATE, ' MON-DD-YYYY "")
ORDER BY ASC dbname;
-
I use firefox on a MacBook pro. Mac OS X version 10.7.5. There was an update of firefox on a day or 2 ago. Since this was done, I was getting 'syntax error' 5 times, each time that a page has been loaded. Some research has suggested that an application or a plug-in called "social fixer" might be the problem but I could not understand how to get rid of it so decided to try to reset Firefox. Minutes passed and a message was on the screen saying the old files of firefox have been been "cleaned" or something, but it seems to be 'stuck' because the progress bar was little jerky. Doesn't it usually doesn't. So I clicked on "Cancel". After that, I couldn't even firefox to start. Looks like my profile is unavailable or inaccessible. Following the instructions found on the support site, I created a new profile and I thought I copied the files from the previous firefox on the new profile, but when I run firefox, it's a blank slate. None of my bookmarks or passwords are there. It must be here somewhere, but I can't seem to understand.
Looks like there was a problem with updating the profiles.ini file.
You can try to remove the current profiles.ini file to force Firefox to create a new default profile where Firefox has not done that.
You can check if there is a profile folder with a number of attached time stamp and in this case, you can set the location of a profile created in this folder.- http://KB.mozillazine.org/Recovering_a_missing_profile
- http://KB.mozillazine.org/Profile_folder_-_Firefox
If you need to recover data from an older profile, always in the default location, or as a folder of old data of Firefox on the desktop then see:
-
Recover data after recovery?
If this isn't the correct forum please move this topic, this isn't a question on the Toshiba product recovery, but directly connected with it (I don't know how it works).
So, the problem is simple, I lost my data because I used the software without a backup (I was distracted)... Is it possible to get it back?
I try with GetDataBack, but I found nothing.
As an extreme idea, recovery disk Labs could operate effectively?In General before the installation of recovery begins any HARD drive will be formatted and new partitions will be defined. All the data saved on the HARD disk will be deleted.
In any case as far as I know that you can recover deleted data using a third request for the part.
-
Blue Screen on Satellite P100 - need to recover data
Putting on my laptop yesterday, I was faced with a blue screen error message that even after running chkdisk keeps appearing, even on reboot in safe mode.
The problem is I only have the Toshiba recovery disks (not a disc XP - XP was preinstalled on your laptop) and they say on them using the wipe recovery disk computer and I need to recover data on the hard drive before reformatting.
I took the laptop to the local repair center and they say they have to reformat and do not make data recovery.
Any suggestions gratefully received.
Hello
In my opinion, there are two solutions. Is, try to get the facilities WXP CD and see if you can fix it using the option to repair Windows XP Home edition or use supplied recovery media and do a clean install of the operating system. After doing this you will put factory once again and everything will be OK again.
-
Recovering data from a Time Machine to an external drive backup
How to recover data from a backup Time Machine to an external drive?
I use Time Machine to back up data (photos, videos) on an external drive (drive A) to another external drive (drive/B) separate that I use for Time Machine backups. After performing a backup, the external drive (drive A) appears in TimeMachine and can I recover files that are on the external drive (A) just as I can for the files that are found on the internal hard drive.
I need to know what to do if I drop my external drive (drive A) completely and you want to recover the Time Machine backup on a new replacement drive? When I disconnect my external drive (A) and enter the Time Machine, I don't find a way to access the files to recover. Still... I know they are there!
Using the Time Machine application in your Applications folder. Please visit Time Machine FAQ of Pondini for using Time Machine.
-
Recovering data from hard drives of laptop data
1. laptop computer work with a hard drive to work (I know that this is the case if you insert the disc of the laptop, it works, it loads windows xp, you can use the laptop according to the normal without errors / problems etc.)
We have a disk external drive kit (again I know works as I use to connect to a multitude of other hard drives via the USB port of a desktop PC) and I have another kit to different hard drive for the first USB SATA hard drive recovery kit and it does the same thing when you try to access the data on the hard drive for laptops
If I connect the laptop hard drive to my desktop PC it won't appear in my computer even if you right-click my computer--> manage--> disk management
The drive appears here as not initialized and will fail if you try to initialize the disk indicating there CRC errors and it will not assign a drive letter.
Is there a quick way to access the data on the disk?
As much as I know readers are not encrypted as when loading after the bios POST, you get not all blue / violet loading gauges, this is Windows XP SP 3 so do not use bit locker or something like that.
What should I do to get access to data as quickly as possible without making too many steps or waiting for utils recovering data, etc..
Also, what do Lenovo for the drives causing headaches as much?
Am confused with your part external kits...
In any case, I assume you have a computer laptop lenovo work and office work. You try to connect lenovo's HARD drive in a USB drive kit and extract data from the desktop.
(1) is the disc encrpted HARD lenovo? Check the Bios and also if lenovo security software are installed.
(2) the fastest way I'm doing it today is to connect laptops and office to a network. Share the disk, and then extract the data from the laptop or desktop. A second option is remote laptop and retrieves the data.
(3) another possibility is that your laptop is XP, IE the formatting isn't AHCI (check the bios under sata), it is in compatibility mode. The Office use Vista or Windows 7?
Maybe you are looking for
-
vacationing bought an iPod shuffle. Want to put my music on computer it already has iTunes girls if I change and try to download it says 90 days until I can change it back?
-
I can change my names of files successfully, mp3s to be precise, uniformly. Windows Explorer or Altap Salamander, there really is no problem with my file name. The problem starts to appear when I put my mp3s in my playlists (VLC, WMP, media player in
-
HP 6520: printer will not printer to paper tray from the photo tray which I don't use.
Printer won't paper tray from the photo tray which I don't use. I don't know why he did it. Printer has never been used for photos and I used it for awhile.
-
Windows Mail cannot receive or send after update-'cannot find server '.
Original title: Windows Mail cannot receive or send after update Use Windows Mail with Vista OS. Has been very well until we had an update last night and now not receive or send and the login box asking username and password keeps popping up. An erro
-
Cannot open picture with Invocation
Hello world I want to call the invocation to open the image: {Of invocationID: invokeOpenquery {}MIME type: "image/png".invokeActionId: "bb.action.VIEW".invokeTargetId: "sys.pictures.card.previewer".onQueryChanged: {}invokeOpen.query.updateQuery)}}on