Cannot open picture with Invocation

Similar Questions

• Why cannot open itunes with windows 10

  Why cannot open iTunes with windows 10

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. (Yes, I see that you've done that but maybe not the specific deletions which are mentioned).

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  See also install missing components in case the installation of a component at a time is successful.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Cannot open files with Windows XP media center edition .exe

  Cannot open .exe with Windows XP media center edition files.  Computer Dell did not come with a rear disc

  Hi CLueking,

  1. what happens when you try to open any .exe (executable) files? You get the error message?

  2. you remember to make changes to the computer, after which the issue started?

  I suggest trying the Microsoft Fixit and/or manual steps from the following links and check if it helps:

  Diagnose and repair Windows files and folders problems automatically

  You receive an error message when you try to start a program that has the an.exe file name extension

  How to change or choose the program that starts when you double-click a file in Windows XP

  I hope this helps.

• I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  I have panasonic lumix g6 and cannot open raw with adobe elements 12 files, there is no support for this problem, any suggestions?

  Did you check help-> updates to see if they are available? You probably don't have the latest version of Camera Raw that was compatible with Photoshop elements 12 installed.

• I cannot take pictures with 5 concerts available through iPhone 5s.

  I'm trying to troubleshoot iPhone 5 s mother.  She directs questions where it does not allow to take photos more because it says it's full.  When go us to settings and look at the use, we have 5 gigs available and used 5 concerts.  She has deleted everything it can turned off his phone and it still not allow it to take pictures with the photo app.  When using facebook, it can.

  We tried a reset and restoration, and he always acts as if his phone is full.

  If you have not already done this, open the Photos app.  Select Albums on the bottom, then "recently deleted".  Choose 'Select' top right, then 'Delete All' at the bottom left.

• receive a winmail.dat file and cannot open it with Windows Vista or Adobe. What do I need to open it

  I tried to download Adobe and still failed to open the file.  Cannot open the file with everything that has been suggested by people of Staples and my place of the computer didn't load good software

  The winmail.dat file does not contain something useful. It's people who use Microsoft Outlook to send e-mail messages. They can prevent to appear by sending messages to plain text. For more details, see the article Microsoft Support Winmail.dat attachments are included in the e-mail messages received in Outlook

• How can I open picture with one. MIX the extention of file

  A few photos on my computer stops have one. Extension of file MIX and w' opened. What causes this

  A few photos on my computer stops have one. Extension of file MIX and w' opened. What causes this

  ========================================
  Some. MIXTURE of files created with Microsoft
  PhotoDraw but more that likely... they were created
  with Microsoft Picture It!.

  (to open the PhotoDraw files... you have PhotoDraw)

  The picture it!. requires format Mix (extension)
  Ms Picture It! or MS Digital Image.

  If you need an application to open files with... you
  could use the trial version of 60 days of digital
  2006 image.

  Even if you have the .mix files... it might be
  a good idea to save them in a more universal
  .jpg, .png, or .tif format. You can make a
  lot in Digital Image if you are going to...
  ...... Editing / Edit in Mini Lab to batch / save under...

  The number of files that you can convert simultaneously
  depends on your system resources but I
  would try 50 and see what happens.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Microsoft Digital Image
  Starter Edition 2006
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=7C3B3DED-A15F-48C5-B724-7796FE8C151E&displaylang=en
  (this product line has been
  abandoned, but you can still
  Download the Starter Version
  and run it to 60 days)

  Another option...

  How to see and/or convert. Picture It!. mix files.

  If you have any version of MS Picture It! / MS
  Digital image... give it a try.

  If they are single image files that have been created
  with MS Picture It!... the following information can be
  your solution:

  The evaluation version of PolyView may allow
  lot to reformat your .mix files.

  You can download an evaluation copy to the
  following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PolyView
  www.Polybytes.com
  (Go to...) Downloads / PolyView 4.42 Setup
  Program)

  When you open PolyView... go to...
  File / Format Conversions...

  Navigate to the folder that your .mix files
  recorded in and open the drop window and
  Choose "All Files".

  On the left, click on the button "add all".

  On the left, click on the button "continue"...

  Choose your JPEG Format 'Destination '.

  Choose your JPEG quality... 100

  Choose a 'Destination folder '...

  Left click on the button 'start '.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Illustrator 2015.3 cannot open picture error

  We have a pair of Mac over a network, the two companies running CC. After the last update, Illustrator files created on one machine and recorded on a common server cannot be opened on another machine. By clicking on the results of the server file in a tiny dialog with just the expression 'cannot open the illustration ".

  By clicking on this box opens Illustrator and shows blank project work plans. No art, no file, nothing.

  Didn't help not copy files to the local hard disk.

  I really need help on this one because it substantially impedes our workflow.

  Quit and restart Illustrator can do ' Can not open Illustrator ' go away. F

  For the startup file more persistent questions of openness I recommend resetting the OOBE

  1. Quit Illustrator & creative cloud
  2. Mac Finder > order G
  3. Enter: ~/Library/Application Support/Adobe/OOBE
  4. Move your OOBE folder somewhere (I do it on my desktop)
  5. Start Illustrator

  They changed the appearance of the OOBE in 2015.3 sorry I can't give you exact directions on the files to move, but I've removed those selected to correct my last time, and there is a good chance that you can just delete them all. A backup lets you restore it, until we can find more information on these files.

  

  Other items you can try:

  • reset the prefs
  • Turn off the GPU by enabling / disabling Commadn E, then open your file.

• Cannot open documents with .cwk on the new imac

  I just upgraded my mini in an imac. I transferred via MIGRATION Asst. I discovered that I had a lot of documents with file extension .cwk. Since Appleworks 6 is no longer viable, I can't open documents. I would like to convert the docs. in PDF format, but can not find a way to do it. For any help or suggestion will be greatly appreciated.

  Try a .cwk file right-click and select "open with...". "Pages. If it works, you can do a right-click on the .cwk file, choose 'Get Info', in virtue to open it with, select Pages in the menu drop-down and check "use this application to open all documents like this.

• Cannot open files with the EXTENSION of the PPT FILE

  I can't open a file with the following extension using PowerPoint ppt. The message below is what I get-

  The selected file is not a valid Microsoft PowerPoint file. It may be a file created by another program.

  Try by double-clicking the file in Windows Explorer to see if another program opens to it. If PowerPoint opens again when you double-click the file in Windows Explorer, it is possible that the file is not a PowerPoint file, but its extension has been renamed to be that of a PowerPoint file type registered (for example, .ppt, .pptx, .pps, .ppsx, .pptx, .pot or .potx) but the file is not a PowerPoint file.

  To determine which program can open the file, try one of the following:

  • Contact the original author (if known) to know what program you used to create this file. Then rename the file with the correct extension so that it can be opened by this program.
  • Try opening the file in other programs.
  • If you or someone you know, are very knowledgeable about software, review the file header in a text editor to determine which program can read the file.

  Another possibility is that the file has been damaged during transfer from another computer. Trying to transfer the file again.

  The file may be damaged. If you have a copy of the file backup, use it. It is not possible repair corrupted file.

  Hello

  see if this applies to your problem

  you don't say what version of Microsoft office powerpoint, you try to open it with

  read below link information saying that you have need of powerpoint 2010 or other programs listed for ppt file extensions

  http://www.FileInfo.com/extension/ppt

  	Microsoft PowerPoint 2010	Info
  	Microsoft PowerPoint Viewer	Info
  	Nuance OmniPage 17	Info
  	ACD Systems Canvas 12	Info
  	Corel WordPerfect Office X 5	Info
  	OpenOffice.org

  If you have an earlier version of powerpoint read this

  Install the compatibility pack if you want to open, edit and save documents, workbooks, and presentations that were created in newer versions of Word, Excel and PowerPoint. Scroll down to see the instructions and system requirements.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyID=941b3470-3ae9-4aee-8f43-c6bb74cd1466&DisplayLang=en

• Cannot open picture.

  Cannot open just purchased illustration in Adobe Stock. Latest version of Illustrator: Error Message: "the file is in an unknown format.

  Hi Paolo,.

  Can you please re - download the https://stock.adobe.com/Member/LicenseHistory .ai files and check if it works now.

  If it's in your CC library, delete the same and the re - upload and check.

  This has been documented here. Adobe Stock help | Troubleshooting Adobe Stock

  Let me know how it goes.

  ~ David

• Cannot open pictures transferred from windows 7 to the new laptop with windows 8

  I transferred all my documents on my new computer windows 8. I can open all documents (word, excel, etc.), but no pictures. When I right click on the folder properties they have, it is set read-only. I have UN-click on that and he sends me to another screen to allow the entire folder. They are still not open, and when I go back into the properties, it is back to read-only. All the pictures have the same icon (green background with a frame in white, inside the frame is mountains and a sun... odd)

  Does anyone know how to get back my photos to their normal state?

  Thanks a lot for your answer. I solved the problem... had a friend stop who thought with me. It had to do with the UN checking the properties under display, marked "display only icons, never thumbnails"... who knew these things exist, or how they get checked! Thanks again for the message.

• Problem with. The NAVE (pictured with D90) - files cannot open pictures

  I get message "could not complete your request because an end of file unexpected has occurred" when I try to open some. NAVE in ACR (version 6.3 in PS CS5) files. Similar results when I try to open it from Photoshop CS4, but the message is "could not complete your request because of a program error". Some. Files NAVE created the same day (on the same card) and downloaded to the folder opened without problem.

  I would appreciate your advice on how I might be able to recover the images. THX.

  • IrfanView shows approximately 2/3 of an image of 4288 x 2848, the lower part being gray way.
  • Windows 7 image viewer shows the same upper part of the image, with the lower part being screwed upward - for example, offset on the side, and in part with the loss of contrast.
  • Reports end of file unexpected met Photoshop.

  Here is what Windows Picture Viewer shows, which could provide enough information to reconstruct the file, with an elbow grease.

  

  This file is clearly corrupt.  How it happened, I can't say.

  -Christmas

• Cannot open files with .php extensions

  Internet Explorer blocks the download of a file, static.ak.fbcdn.net and if I allow the download of what he asks me to find a program to open xd_proxy.php.  My computer is not a program that can open a php file.  She reminds me of a site microsoft on the web who told me that he cannot stand the programs with the .php extension.  Then what should I do?

  Internet Explorer blocks the download of a file, static.ak.fbcdn.net and if I allow the download of what he asks me to find a program to open xd_proxy.php.  My computer is not a program that can open a php file.  She reminds me of a site microsoft on the web who told me that he cannot stand the programs with the .php extension.  Then what should I do?

  THIS FREE PROG WILL OPEN THEM also try windows Notepad

  http://Notepad-plus-plus.org/

  A PHP file is like any other text file you may know. So, you can use easily available programs such as Notepad on Windows or TextEdit on aMac, to open a PHP file. You can also use these programs to edit and save the PHP file. In addition, there are a multitude of programs specifically designed for editing PHP files.

  To open a PHP file in Notepad, first launch the Notepad application. In Notepad, select file, open in the menu bar. Navigate to the folder where you saved the file PHP. You will notice that the file does not appear in the list. To see the PHP file, you will need to change the extension to all files by using the dropdown next to the file name field. Now you should be able to select your PHP file, then click Open.

  Read more: http://www.brighthub.com/internet/web-development/articles/62614.aspx#ixzz1D7CYHUsr

• Cannot open pictures (jpg) in Windows 8 after restoring a backup of my old laptop to Windows 7. Permissions problem?

  Using a WD 1 TB external hard drive and the WD software, I made a backup of my old computer with the intention of transferring pictures, documents, etc. to my new computer Windows 8.

  Files backed up and I restored it selectively records my images on the new computer without error.

  When I open the folder my pictures in Windows 8, I see the files but the imprint does not show the picture.  to place an icon for Windows picture something or another watch (purple photo of the mountains).

  Images will be open in everything I tried.  Something about a permissions problem.

  Any ideas on what I could have done wrong or how to fix the permissions problem, so I can see my photos?

  Click on the photos (you can select/highlight all and do it once for each of them at the same time) and go to properties.  On the Security tab, click Advanced, and then change the "owner" for your user account (search in the options that appear).

  After you set the owner, click OK until all boxes are saved/closed.  Return to properties again and this time, set yourself to have "total control" on the files. Now you should be able to open and use.