Recover is looking for an outdated sequence?

Similar Questions

• The database recovered to sleep, he's still looking for the gap sequence

  I lost the archive logs in the primary and standby (deleted because of the small footprint).
  So follow the steps below.
  
  1 identified minimum database pending YVERT.
  2A took inremental primary database backup according to the SNA (nnnnn)
  3. transfer the backup file to the side sleep
  4 cataloged database backups and recover the database.
  
  But the medial recovery is looking for lack of archived newspapers. Please advice.

  Hello

  Please refer to this http://www.shivanandarao.wordpress.com/2012/03/26/roll-forward-physical-standby-database-using-rman-incremental-backup/

  It may be useful...

• Looking for DVD recover my Satellite P200

  Hello

  I am looking for a DVD reinstall my Satellite P200 - 12 K (preferably in french)
  Thank you for your help.

  Philippe

  Hello Philip

  It might be problematic for you to find the original Vista recovery disc for this older model laptop.
  I'm also sure that you will not be able to order it too so my advice to you is to install the clean version of Win7 32-bit by using the original installation disc for Microsoft.

  I had long ago P200D and I used it with Win7. I found all the necessary drivers, tools and utilities on Toshiba download page - http://www.toshiba.eu/innovation/dow...ivers_bios.jsp

• Looking for hope in the restoration of my iMac

  My iMac HD has failed, and I took it to Apple to get it replaced. I had a Time Machine backup on an external hard drive Seagate. But my iMac just not see the backup drive Seagate. I don't know if there is a trick to getting the Seagate HD displays. It does not show in Finder or in disk utility. But when the iMac HD was not, and I looked for ways to restore, I saw a Time Machine backup date. Now, I can not see the drive. Even though I have the music and pictures stored in iCloud, all my apps are now gone. I don't know where to start. I was a fool to trust Time Machine? This is literally disastrous for me, and I don't know where to start. What I need, is to see this backup disk somewhere BTW, I plugged on another iMac and he did not see it either. Is there some magic for Seagate HD?

  Some things you can try:

  * Open the Finder preferences (under the Finder menu, top left of your screen). Make sure that on the general tab, the boxes are ticked for hard disks and drives, to show them on your desktop. Otherwise, they won't be visible.

  * Try a new cable. The cable went wrong.

  * Open disk utility when the drive is connected. You can see on the left hand side of the disk utility? If you see an external drive, try to mount in disk utility. If you can ride, the files are available? If this isn't the case, you can run disk utility to try to fix it.

  * Seagate's data recovery services.  http://www.Seagate.com/services-software/recover/ first of all, you can download their software and try it for free. If it can find files on the disk, you can then purchase the license of their recovery software to use to recover your files from the Seagate drive. Alternatively, he can perform the data recovery for you (with supplement). The details are at this link.

  I'm sorry it happened, I wish you good luck.  It seems that your problem could not Time Machine, which is actually a very good backup program; but rather, your external drive seems to have a problem. This happens to all readers subsequently, no last forever and that's why I try to keep at least two backups, each with a different method. For example, one with Time Machine, the other using software such as "clone" (such as SuperDuper, CCC etc.). It is good that you use the cloud at least. I hope that you can recover your files.

• How to access my hotmail server to look for deleted messages?

  How to access my hotmail server to look for deleted messages?

  Hello

  Click this link to go to the Hotmail Web site.

  Hotmail
  http://www.hotmail.com

  =================

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/
  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• How can I recover my pc for the first time that I bought?

  Hello
  How can I recover my pc for the first time that I bought? because my pc is so slow... I have a compaq laptop cq61... and I want to set up the first time... How can I?  I don't have a recovery disk because when I bought it dosnt have a recovery in it disc. Please help me. Thank you

  Hello

  I'm happy to help you

  Glancing at the screen shot you posted, your looks of partition fine recovery (recovery (D).

  Save your files on an external hard drive or flash drive (depending on how many you have).

  Once that is done, disconnect all connected to your PC, but the AC adapter.

  Start the PC and the HP welcome screen, press the F11 key to start the Recovery dialog box and follow the prompts.

  It should take 15 to 30 minutes and your PC needs to be restored to its factory settings.

  Then just reinstall all programs and files that does not come with the PC.

  You will need the files or the installation of program diskettes. You cannot back up installed programs and reinstall them using a backup.

  Paul

• Looking for a NVIDIA nForce Serial ATA Controller Driver Update for Presario CQ5107C

  Hello

  The last two weeks, my computer, which is a Compaq Presario CQ5107C been freezing while I'm on it, and while I'm even not use without programs open. The pilot also missed a couple of times during use, but a message pops up saying something close to "driver recover successfully. Also, when I stopped it, it takes forever to stop and sometimes when I try to shut down properly, it goes to the blue screen and said that one of the drivers failed, which I guess it's my NVIDIA nForce Serial ATA Controller driver. My GetForce put up to date the most recent driver updated and there is no problem I know with whom. I read a litte autour my ATA driver can slow down and start doing this gel then go to blue screen if it malfunctions. I'm running on a 32 bit Windows Vista processor and have not yet update my Windows 7. I was looking for every possible way get an update for my ATA controller driver anywhere without having to pay for it. I guess I should upgrade to Windows 7 to possibly get an update. Update to Windows 7 would remove all the programs/personal off my computer files and if I had to stop the gel? Any help would be great because I searched everywhere and found the best solution yet. Thank you.

  Here are the specifications of your Compaq Presario CQ5107C desktop computer. According to the specifications, it uses a GeForce 6150SE / nForce 430 chipset. The chipset driver is below.

  Windows Vista/Win7 32-bit driver v15.49

  Supoorts; 430 / GeForce 6150SE, 430 / GeForce 6150LE, 430 / GeForce 6150, 430 / Geforce 6100, 420 / Geforce 6100, 410 / GeForce 6150LE, 410 / GeForce 6100, 405 / Geforce 6100, 400 / Geforce 6100

  Driver Ethernet (v73.14 +) WHQL

  (V73.16) network management tools "Sedona".

  SATAIDE (v11.1.0.33) WHQL driver

  SATARAID Driver (v11.1.0.33) WHQL

  Application RAIDTOOL (v11.1.0.30)

  SMBUS (v4.74) WHQL driver

  SMU (v1.71) WHQL driver

  GPU (v190.38) WHQL driver

  PhysX (v9.09.0428)

  Away Mode Driver (v6.0.6000.114) WHQL

  Installer (v7.57)

• backup did not work looking for ox80070002?

  looking for 0 x 80070002 for back to top

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Win32k.sys caused BSOD IRQL, looking for likely causes

  While I was recording game for a game with Fraps, I got BSODed with him saying that an IRQL_NOT_LESS_OR_EQUAL error has been generated by win32k.sys.  I have debugged the minidump file and am looking for a reason why it happened.  I don't see anything obvious to said in the report that is generated if:

  Loading dump file [C:\Windows\Minidump\Mini071811-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 6002.18327.x86fre.vistasp2_gdr.101014 - 0432
  Computer name:
  Core = 0 x 82036000 PsLoadedModuleList = 0x8214dc70
  The debugging session: my Jul 18 22:01:47.823 2011 - 07:00 (UTC).
  System Uptime: 5 days 2:05:24.971
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .........................................
  Loading user symbols
  Loading unloaded module list
  ..................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {9f5fffe4, 2, 1, 820cbc5b}

  Probably caused by: win32k.sys (win32k! Win32AllocPool + 13)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: 9f5fffe4, memory referenced
  Arg2: 00000002, IRQL
  Arg3: 00000001, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: 820cbc5b, address memory

  Debugging information:
  ------------------

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from 8216d 868
  Cannot read MiSystemVaType memory at 8214d 420
  9f5fffe4

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! MiUnlinkFreeOrZeroedPage + 87
  820cbc5b 890c 10 mov dword ptr [eax + edx], ecx

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XA

  Nom_processus: pcsx2 - r4600.exe

  TRAP_FRAME: cac1b9fc-(.trap 0xffffffffcac1b9fc)
  ErrCode = 00000002
  EAX = ebx = 00000023 000010a 8 ecx = 00004600 edx = 00000000 esi = 00000000 edi = f68fc0a8
  EIP = 820eb23a esp = cac1ba70 ebp = cac1bab8 iopl = 0 nv in pe of na EI pl nz nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010206
  NT! ExpAllocateBigPool + 0 x 231:
  820eb23a 895ffc mov dword ptr [edi-4], ebx ds:0023:f68fc0a4 is?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from 820cbc5b to 82083fd9

  STACK_TEXT:
  cac1b7a0 820cbc5b badb0d00 88c8d8b8 83600000 nt! KiTrap0E + 0x2e1
  cac1b824 820cbeaf 00049351 85e44478 400001d 5 nt! MiUnlinkFreeOrZeroedPage + 0 x 87
  cac1b864 820ae467 000001d 5 86399030 c07b47e0 nt! MiRemoveAnyPage + 0x16c
  cac1b8ac 820adce4 00000001 f68fc0a4 c07b47e0 nt! MiResolveDemandZeroFault + 0x2e2
  cac1b968 820cf331 f68fc0a4 00000000 00000000 nt! MiDispatchFault + 0xadb
  cac1b9e4 82083dd4 00000001 f68fc0a4 00000000 nt! MmAccessFault + 0x10c6
  cac1b9e4 820eb23a 00000001 f68fc0a4 00000000 nt! KiTrap0E + 0xdc
  57 000000 has 8 00000021 000010 82123c cac1bab8 has 8 nt! ExpAllocateBigPool + 0 x 231
  00000021 000010a 0 35316847 nt a21664c9 cac1bb18! ExAllocatePoolWithTag + 0 x 116
  cac1bb2c a214a4aa 000010a 0 35316847 and 00000000 win32k! Win32AllocPool + 0x13
  cac1bb40 a216a2ee 000010 has 0 cac1bbe4 35316847 win32k! PALLOCMEM + 0X18
  cac1bb5c a214a88d 000010a 0 00000001 and 00000005 win32k! AllocateObject + 0 x 97
  cac1bb94 a21533c1 00000000 00000000 00000080 win32k! SURFMEM::bCreateDIB + 0x21d
  cac1bc48 a2127c98 01010052 00000000 00000000 win32k! GreCreateDIBitmapReal + 0x320
  cac1bce4 a2127f35 085a805c 00000000 00000000 win32k! _InternalGetIconInfo + 0xbe
  cac1bd44 82080c7a 00010003 085a805c 00000000 win32k! NtUserGetIconInfo + 0xf1
  cac1bd44 77d75ca4 00010003 085a805c 00000000 nt! KiFastCallEntry + 0x12a
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  00000000 00000000 00000000 00000000 0x77d75ca4 085a803c

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Win32k! Win32AllocPool + 13
  5 d a21664c9 pop ebp

  SYMBOL_STACK_INDEX: 9

  SYMBOL_NAME: win32k! Win32AllocPool + 13

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: win32k

  Nom_image: win32k.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d6f96aa

  FAILURE_BUCKET_ID: 0xA_win32k! Win32AllocPool + 13

  BUCKET_ID: 0xA_win32k! Win32AllocPool + 13

  Follow-up: MachineOwner
  ---------

  So far, this was the only time where I had it coming, but I have not tried from new record yet.  Actively running programs are FireFox, Pcsx2 and Fraps.  However, I ran these before without this issue arise.  I'm inclined to think that this is a time to screw that maybe something has been registered correctly or incorrectly read memory.

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
  a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
  Tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Looking for an answer

  I've been on the microsoft web site earlier and I was looking for help relating to passwords forgotten for administrators. Well when I got answers he gave me some good foods back and I have worte low case of some steps on how to replace passwords through a good command prompt some how when I tried I got a little stuck, so I went back to the site to see if I understood straight well to my surprise I can not find this solution If someone can help me with this command prompt would be great

  Thank you ALL

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm looking for a passwpord of courts

  I'm looking for a passwpord of courts

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read the BANNING of cracking of passwords information tools information provided in these forums in the thread above posted by Bill fill MSFT, moderator

  Mick Murphy - Microsoft partner

• I'm looking for where the trash blurs his trash

  I'm looking for where the trash blurs his trash. I want to remove it and put it into a thing of data storage, I bought as an E: / drive

  As you empty the trash it is not jam files (unless you have special 3rd party software), or put the files anywhere.  It simply removes the headers so that they no longer can be identified or consulted.  The space that they have taken/take is considered to be available and they are entirely deleted once they are replaced by something else.  If you want to save the deleted files on your drive E:\, then instead of emptying the trash, cut its contents and copy them to the E:\drive whenever you choose.

  If you want to find files that were emptied from the Recycle Bin, you must use a file recovery tool.  Here are a few options.

  http://www.SnapFiles.com/freeware/system/fwdatarecovery.html (first try Recuva)

  http://www.SnapFiles.com/get/DiskDigger.html (try this second - if this also fails, then the chances of recovery are very slim, but we invite you to try the other options)

  http://www.SnapFiles.com/get/easusdfr.html

  http://www.SnapFiles.com/get/restoration.html

  http://www.SnapFiles.com/downloads/Recuva/dlrecuva.html

  http://www.SoftPerfect.com/products/FileRecovery/

  http://techpaul.WordPress.com/2008/06/23/how-to-recover-your-lost-files/

  The files are not really deleted until they are crushed (although they are no longer available through conventional methods).  If you decide to try these recovery programs, you should stop using your drive hard immediately in order not to replace the data that you are trying to recover.  He slave on another PC and launch the recovery of this PC.  Even now you have definitely lost some of them if you use the same PC.  If you can not do this (slave on another PC), you run the risk of overwriting the data with every action you do on the PC (but you may still be able to recover some or most or even all files - it's a matter of luck).

  Only you can decide if the data is important enough to take the PC to an expert data recovery to recover files (they will have better programs and hardware to do that none of us do, and I've provided above).  Do NOT go to the Geek Squad or one of these centers of store-, they generally don't know what they are doing - it take for expert data recovery.  It will cost you a little and they generally offer no guarantees.  The decision is yours.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Looking for missing drivers after downgrading

  I got a new HP Envy 700 - 030qe CTO of Windows 8 for Windows 7.

  First question: is there a place I can get ALL the compatible drivers for this machine on Win7?  I'm sure that HP sold this machine exactly (or almost exact) a few months ago with Win 7 on it?  If someone can tell me the model number then I could order the recovery for her disc, hopefully.  I have a legal copy of Win7 with license key, all I need is the drive to recover to Win7.  Even if this is not correct, it would be closer to that you are looking for a bunch of missing drivers one by one.

  Second question:

  I could find most of the drivers except something that presents itself as a USB controller (although most of the USB ports seems to work, maybe all of them).  Any idea what to try for this HP drivers:

  CONTROLLER USB - Hardware ID

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_2AF3103C & REV_04

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_2AF3103C

  PCI\VEN_8086 & DEV_8C31 & CC_0C0330

  PCI\VEN_8086 & DEV_8C31 & CC_0C03

  Pointers are greatly appreciated!

  Thank you.

  Hello:

  You need the USB driver.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=Intel+USB+3.0+Extensible+host+controller+driver&lang=eng

  There are no models with the motherboard in your PC with W7 drivers.

  Even if there were, the recovery of one of these models discs would not work on yours.

  W7 drivers you need:

  First install the chipset driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation&lang=eng

  Graphics card:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22842&ProdId=3720&lang=eng&OSVersion=%0a%09%09%09%09%09%09%09%09%0a%09%09%09%09%09%09%09&DownloadType=drivers

  Try this audio driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-119074-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0028

  Wired network.  Download and install the driver 4th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• I am looking for an upgrade at any time key for windows 7 Professional or ultimate edition and cannot find a place to buy a

  I am looking for an upgrade at any time key for windows 7 Professional or ultimate edition and cannot find a place to buy one any where can someone help.

  Original title: Windows 7 Upgrade

  At any time the updates are most of the time is no longer available. However a commercial version of 'Upgrade' (not an OEM) will also do what you want. Only downside is the cost $$$ that Windows 7 is in short supply.

  Amazon: http://www.amazon.com/Microsoft-Windows-7-Ultimate-Upgrade/dp/B002DHLV8S/ref=sr_1_5?ie=UTF8&qid=1390672154&sr=8-5&keywords=Windows+7+upgrade

  All you have to do is enter the product key.

  =============================================================

  Windows 7 Anytime Upgrade: Instructions

  First read this: Windows Anytime Upgrade: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions
  Subdivision: What should I do if I bought a package of Windows Anytime Upgrade key card, but there is no upgrade key inside?
  Answer: If you bought a package of key card upgrade and the upgrade key is not inside, carefully read the instructions on the packaging. You may need to go online to get your upgrade by using the PIN key which is included in the package.

  Note: Windows Anytime Upgrade is available for purchase online in Australia, Belgium, Canada, Germany, France, Italy, Japan, Netherlands, Spain, Sweden, Switzerland, United Kingdom and the United States.

  If you encounter problems recover your key product using your PIN code, please use the resources below.
  www.windows7.com/getkeysupport.

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.

  ======================= Upgrading ======================================

  No need to re - install Windows 7, just use the instructions of setting "Anytime" below.
  Note: This assumes that you upgrade from 32 bit to 32-bit Windows 7 OR 64 - bit to 64 bit.

  If you bought a package of key card upgrade and the upgrade key is not inside,
  read carefully the instructions on the package.
  You may need to go online ( https://windows.getmicrosoftkey.com/) to get your upgrade key
  using the PIN, which is included in the package.

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Alternative methods:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  Enter the text below into the run (Windows KEY + R or a command prompt) dialog box:
  %windir%\system32\WindowsAnytimeUpgradeUI.exe

  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade

  A 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:
  http://www.howtogeek.com/HOWTO/14943/how-to-upgrade-your-NetBook-to-Windows-7-Home-Premium/

  -Windows Anytime Upgrade in Windows 7 - troubleshooting

  http://www.thewindowsclub.com/Troubleshooting-Windows-Anytime-Upgrade-in-Windows-7

  Also the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators of systems product keys, this applies also to the VL (Volume License), keys (KMS) users management server should consult with your administrator before attempting to perform an Express upgrade. MSDNAA or key teaching will not work with the Express upgrade.

  -Anytime Upgade options-

  Windows 7 Starter to Windows 7 Home Premium
  Windows 7 Starter to Windows 7 Professional
  Windows 7 Starter to Windows 7 Ultimate
  Windows 7 Edition Home Premium to Windows 7 Professional
  Windows 7 Edition Home Premium to Windows 7 Ultimate
  Windows 7 Professional to Windows 7 Ultimate

  J W Stuart: http://www.pagestart.com