The database recovered to sleep, he's still looking for the gap sequence

Similar Questions

• Why is my music library still looking for missing unknown album everyday now never stops

  Why is my music library still looking for missing unknown album everyday now never stops

  Hello

  ·         You did changes to the computer before the show?

  ·         What Media Player do you use to play music files?

  ·         What is the file type of the music files you want to play?

  If you are using Windows media player, I suggest you to re - index the WMP library by following the steps below and check it, if it helps:

  (a) output Windows Media Player.

  (b) click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  (c), select all the files in the folder and then click on Delete on the file menu.
  Note: You don't have to remove the folders that are in this folder.

  (d) restart Windows Media Player.
   
  Note: Windows Media Player automatically rebuilds the database

• FAL [client]: you cannot request the gap sequence

  OTN community,
  
  Database: Oracle 10 g 2 group patch 3
  Operating system: HP - UX v.11.31
  
  I have a problem with the gap on the physical database archivelog ensures. You can very well below outputs;
  

  SQL> select * from v$dataguard_status;
  
  FACILITY                 SEVERITY         DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAMP           MESSAGE
  ------------------------ ------------- ---------- ----------- ---------- --- ------------------- ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Log Transport Services   Informational          0           1          0 NO  18/07/2010 02:56:28 ARC0: Archival started
  Log Transport Services   Informational          0           2          0 NO  18/07/2010 02:56:28 ARC1: Archival started
  Log Transport Services   Informational          0           3          0 NO  18/07/2010 02:56:28 ARC0: Becoming the 'no FAL' ARCH
  Log Transport Services   Informational          0           4          0 NO  18/07/2010 02:56:28 ARC0: Becoming the 'no SRL' ARCH
  Log Transport Services   Informational          0           5          0 NO  18/07/2010 02:56:28 ARC1: Becoming the heartbeat ARCH
  Log Apply Services       Control                0           6          0 YES 18/07/2010 02:57:15 Attempt to start background Managed Standby Recovery process
  Log Apply Services       Control                0           7          0 YES 18/07/2010 02:57:15 MRP0: Background Managed Standby Recovery process started
  Log Apply Services       Informational          0           8          0 NO  18/07/2010 02:57:20 Managed Standby Recovery not using Real Time Apply
  Log Apply Services       Informational          0           9          0 NO  18/07/2010 02:57:21 Clearing online redo logfile 1 /usr/ORACLE/u02/KNWA_redolog/redo01a.log
  Log Apply Services       Informational          0          10          0 NO  18/07/2010 02:57:21 Clearing online redo logfile 1 complete
  Log Apply Services       Warning                0          11          0 NO  18/07/2010 02:57:21 Media Recovery Waiting for thread 1 sequence 354977
  Log Apply Services       Informational          0          12          0 NO  18/07/2010 02:57:21 Fetching gap sequence in thread 1, gap sequence 354977-354985
  Log Transport Services   Warning                0          13          0 NO  18/07/2010 02:57:52 FAL[client]: Failed to request gap sequence
  Fetch Archive Log        Informational          0          14          0 NO  18/07/2010 02:57:52  GAP - thread 1 sequence 354977-354985
  Fetch Archive Log        Informational          0          15          0 NO  18/07/2010 02:57:52  DBID 1228244844 branch 688497708
  Log Transport Services   Informational          0          16          0 NO  18/07/2010 02:57:52 FAL[client]: All defined FAL servers have been attempted.
  
  16 rows selected.
  
  SQL> archive log list;
  Database log mode              Archive Mode
  Automatic archival             Enabled
  Archive destination            /usr/ORACLE/archive/KNWASTBY/
  Oldest online log sequence     354990
  Next log sequence to archive   0
  Current log sequence           354992

  More old newspaper online sequence is 354900, but he tries to retrieve the sequence 354977-354985. I don't want the database to extract the old archivelogs since the YVERT database and controlfile is up-to-date. I really don't understand why he keeps trying to get the old archivelogs in the primary. I already deleted the archivelogs and I applied the last backup on the standby site.
  
  How can I omit these old archivelogs and leave the unapplied archivelogs applied to the standby database.
  

  SQL> select sequence#,applied from v$archived_log;
  
   SEQUENCE# APP
  ---------- ---
      354987 NO
      354990 NO
      354989 NO
      354986 NO
      354991 NO

  Log shipping is correct and the standby can trace switches archivelog perfectly.
  
  Thank you in advance.
  
  Ogan
  
  Published by: Ogan Ozdogan on 18.Tem.2010 03:07
  
  Another question, how can I change the standby controlfile controlfile to understand the database didn't need than archivelogs more?
  
  Ogan

  Thanks ogan.

• I'm still looking for an answer to my question... How can I get rid of the popup that says that the message cannot be copied... I'm trying to remove it

  I cannot so try to delete my read emails... I get the pop up message as shown please help me to find a way to stop this and delete my messages...

  "the selected message could not be copied to the folder" when I try to delete an email...

  . Thank you

  Well, I do not know "Still waiting" - this seems to be the only post you did on this site...

  I don't know why you're getting this pop-up window, unless you do not use the Mail app...

  In the Mail application, highlight the email and click on the button Delete in the top right of the window, as in this case:

  

• Recover is looking for an outdated sequence?

  I am recovering a database of strictly my compressed RMAN backup files. This is mainly to test backups.
  Backups are handled through jobs on EM Grid - a Sundays L0 and L1 throughout the week with a window of 7 days recovery.
  
  I have copied all my backup files to a clean server, restored the spfile, control files and the database.
  All this seems to work fine until I got to 'recover database'
  ---------------------------------------------------------------------
  Cannot find the log archiving
  archive log thread = 1 = 114979 sequence
  Oracle error:
  ORA-01547: WARNING: RECOVER succeeded but OPEN RESETLOGS would get below error
  ORA-01194: file 1 needs a recovery more match
  ORA-01110: data file 1: ' / home/oracle/oradata/ORADB/system01.dbf'
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command recover at 25/08/2010 17:47
  RMAN-06054: recovery of media asking unknown journal: thread 1 seq 114979 lowscn 271439926
  ---------------------------------------------------------------------
  The agreement here - the sequence sooner I find in my backup files is 196783 - and this is the 04/08/2010...
  Why he would seek for a sequence outside my window of recovery? Sequence 114979 would be well over a year.
  
  Remember, I use a fairly standard backup "Oracle suggested" here... I am restoring wrong or my backup strategy is completely useless.
  
  Please notify.
  
  Thank you!

  Hi Alan,
  You have the option 'ignore the tablespace forever', you can associate the restore/recovery in rman commands.
  Best regards
  Phil

• Still looking for an answer to a very slow start, Firefox only (other browsers open quickly) on a Windows 7 PC.

  Firefox has a lag more than a minute when I click on the firefox button on my toolbar and time FF is actually. I tried to disable modules and even return to an older version of FF - always, same problem. Any suggestions?

  Have you tried Firefox 10?

  • getfirefox.com

• Database ALTER DATABASE RECOVER using backup controlfile with AUTO option

  Hello. I was recovering a database today and had a little blip.

  I have published the following:

  Database ALTER DATABASE RECOVER using backup controlfile

  I then chose the AUTO option, allowing Oracle to select all available log files so that it would recover to the last log found in the destination of archive

  However... has performed the following:

  ORA-00289: suggestion:
  /U03/Oracle/stk2proddata/archived_logs/arch1_242449_737547185.dbf
  ORA-00280: change 30031145558 thread 1 is in sequence #242449
  ORA-00278: log file
  ' / u03/oracle/stk2proddata/archived_logs/arch1_242448_737547185.dbf' is no longer
  necessary for this recovery

  
  ORA-00308: cannot open archived log
  ' / u03/oracle/stk2proddata/archived_logs/arch1_242449_737547185.dbf'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3

  Two messages above that I expected. However, I made then this:

  SQL > alter database open resetlogs;

  ALTER database open resetlogs

  *

  ERROR on line 1:

  ORA-01113: file 1 needs media recovery

  ORA-01110: data file 1: ' / u02/oracle/stk2proddata/system01.dbf'

  This is not what I expected. What I've done wrong? Should I once received the message "cannot open archived log", launched to CANCEL?

  I then recovered again, but used

  SQL > restore database using backup controlfile until cancel;

  ORA-00279: change 30031145558 generated at 30/04/2014 09:58:34 needed to
  thread 1
  ORA-00289: suggestion:
  /U03/Oracle/stk2proddata/archived_logs/arch1_242449_737547185.dbf
  ORA-00280: change 30031145558 thread 1 is in sequence #242449

  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}

  ORA-00279: change 30031157768 generated at 30/04/2014 10:06:07 needed to
  thread 1
  ORA-00289: suggestion:
  /U03/Oracle/stk2proddata/archived_logs/arch1_242450_737547185.dbf
  ORA-00280: change 30031157768 thread 1 is in sequence #242450
  ORA-00278: log file
  ' / u03/oracle/stk2proddata/archived_logs/arch1_242449_737547185.dbf' is no longer
  necessary for this recovery

  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  Cancel
  Cancelled media recovery.
  SQL > alter database open resetlogs;

  Database altered.

  No problem then here. Could someone please explain what I did wrong the first time and the second time right? Is this a problem with the car and using CANCEL?

  Thank you!

  DA

  11.2.0.2

  RHEL 5.5

  Bug: 4178579

• Problem with backup of database recover command

  Hi all
  
  Operating system: solaris sparc 9
  
  DB version 11 GR 2
  
  Too many archives were generated on the prod instance so BCP went out of sync and unfortunately we had to remove the archives too. We went to the front in the run-up to rollforward. But now we are faced with a strange question, issuing recover standby database now we get the error below:
  

  SQL> recover standby database;
  ORA-00279: change 10505773008414 generated at  needed for thread 1
  ORA-00289: suggestion : /archive/oracle/1_1_718997430.dbf
  ORA-00280: change 10505773008414 for thread 1 is in sequence #1

  Now archive which is it ask is the first archive which has been generated in the comic book.
  
  Can anyone suggest it please how do I solve the problem? We are unable to find any docs on metalink/net support.
  
  Concerning
  KK

  Hello;

  There is a note on what can help:

  How to retrieve and open the database if necessary the archivelog collection is missing, lost or damaged? [465478.1 ID]

  Best regards

  mseberg

• I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?

  I rolled again Firefox 4.0 to 3.6 and now my navigation bar still looks like instead of 3.6 4.0 how to get the old layout back?

  The fastest way is to use the option 'Restore the default toolbar set' as shown here - https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

• Why did I downloaded Firefox 4.0, but I do not have the firefox orange box in the upper left corner of the screen. My screen still looks like the old version of firefox. My screen does not resemble that of the video. nothing like that

  My Firefox 4.0 does not resemble something like the videos you show on the new Firefox features. My screen looks completely different from yours. It doesn't have the orange box in the upper left corner of the screen. My screen still looks like the old version. I have the logo on the top of my screen with ask a Question, a vertical line helps Firefox - Mozilla Firefox.
  Under this heading, I have File, Edit, View, history, Favorites, tools, and help. Below this line is a tab Ask a Question Firefox Help and has +. The screen of my husband looks identical to the orange box of Firefox in the upper left corner of the screen. I wish that my screen look identical to those shown in your videos. I have a version of Firefox 4.0 my husband has the Firefox 4.0 and the beta version. How to add the beta version? I have Windows Vista running systems. Help, please. Thank you

  To get the new interface, you need to hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.

• I'm looking for a sleep mode function that goes off after some time. I would like to limit the time that my teenager spend on the game

  I know how to use window 7 time limit control. BUT it does allow me to leave my teenager spend any time of the day only 2 hours. I'm looking for something like a standby mode. After that he connects to his side of the user of the computer, turning after 2 hours of play.

  (Moved from Gaming)

  Hi Stephanie,

  Thanks for posting your request here in the Microsoft Community.

  We have a feature called schedule a task, this will help you plan the task of putting the computer in Mode standby when you want the computer to access the Mode sleep. See the following Microsoft Help article to learn more about this feature.

  http://Windows.Microsoft.com/en-us/Windows/schedule-task#1TC=Windows-7

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Please reply with the status of the issue so that we can better help you.

• I bought the plan of photographer, signed Out and back in creative cloud, but Photoshop is still unavailable for me

  I bought the plan of photographer, signed Out and back in creative cloud, but Photoshop is still unavailable for me

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now

  Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now and the best advice seems to apply to CC 2014 and has to do with installoing a previous version (CS6) of the Prime Minister - but seems not to apply to the CC 2015... HELP - I have plans to burn and don't want to go to third-party software (if I do I'll ditch CC because it won't let me complete my work on a DVD!) @.

  Hi Matt,

  I found this link corresponding to your query, please see if it helps: CS6 still not installed with creative cloud

  Kind regards
  Rahul

• Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  Is it possible to have the Parallax scrolling and changing slide show? (so the slideshow still looks and looks you scroll your top content once again)

  You can apply the opacity to images or defining a key position for slide show as well as with the page highlight opacity changes and will bring similar effect.

  Thank you

  Sanjit

• Hi I was told to come to the support with the error number 16... for some reason, my first pro no longer works and I'm still paying for I have but I had to reinstall, which I don't know how to do if

  Hi, I got to come to the support with the error number 16. for some reason, my first pro no longer works and I'm still paying for I have but I had to reinstall, which I don't know how to do if

  Hi Omid,

  Please see the below help document to fix the error 16:

  Configuration error 16. CC, CS

  If the problem persists, please contact support:

  Contact the customer service

  Kind regards

  Sheena