Recovery BIOS for PC-FU037ET #UUZ

Similar Questions

• Recovery BIOS for aspire One KAV60

  Hello!
  So I was pretty stupid and while trying to solve a problem of small equipment (who did get fixed), updated the BIOS from the support section. Now I'm in my ears with a lot of other small problems (USBs malfunction every 10 minutes, forcing a reset. Power be ultra sensitive and the flicker of the screen constantly, being slower, etc..) and I was wondering if there was a way to restore the bios to the previous version of factory. Current BIOS problem I have on it is v1.26.
  Thank you for your patience and support!
  -Rich

  Hello Astro,

  Enclosed all versions of bios for Aspire One AOD250 (KAV60):

  BIOS	Acer	BIOS	1.29	2.6 MB	12/27/2010	Download
  BIOS	Acer	Improves the performance of the battery.	1.28	2.6 MB	16/08/2010	Download
  BIOS	Acer	Changes the output Page pop-up message string and the stri [...]	1.27	2.6 MB	15/03/2010	Download
  BIOS	Acer	Fixed incorrect Atom N280 CPU frequency in the Windows 7 operating system.	1.26	5-2. MB	01/02/2010	Download
  BIOS	Acer	BIOS	1.25	5-2. MB	2009-12-08	Download
  BIOS	Acer	BIOS	1.21	2.4 MB	05/10/2009	Download
  BIOS	Acer	BIOS	1.15	2.4 MB	21/09/2009	Download
  BIOS	Acer	BIOS	1.14	2.4 MB	15/09/2009	Download
  BIOS	Acer	BIOS	1.07	1.4 MB	06/07/2009	Download

  You have not indicated your versions of windows.

  So I advise you to reflash your bios on MS-DOS (safer).

  To Flash the bios with MS-DOS:

  1 make a Flash drive bootable MS-DOS with FlashBoot (demo) or How to make a MS-DOS bootable flash drive (USB key)

  2 - Download the bios file.zip#/

  3-copy FLASH-. EXE, KAV60. BAT and KAV60.fd on a USB key.

  4 - boot on USB.

  5. When you are on MS-DOS, type the command KAV60. BAT

  6 - if it of flash successfully, restart your system (normally, it reboot automatically).

  7 - Enter the configuration utility of the bios, "Load the defaults of optimazed".

• Recovery BIOS for Satellite U400 - 138 PSU44E

  Hello

  I could not with update of the bios that I had taken the official support page from toshiba bios file. I don't know that I had chosen the right bios file. But something is wrong and my laptop is brick, and now.

  I'm trying to recover the bios with Phoenix crisis recovery. I tried 2-3 varieties of the recovery from the crisis.

  I have a backup of the old bios, stable, so I'll try to recover with this old bios file. I tried Win + B, FN + B, Win + F, F + FN, Fn + Esc, keystroke U for the recovery from the crisis.
  Furthermore, I use 1 GB drive/usb formatted FAT for this purpose. The machine will beep every time, and I'm waiting for 10 minutes or more after the beeps.

  I put the file of bios on usb drive with a lot of names "bios.wph", ".fd", "bios.fd". Also I tried to use the usb disk, the bios file is 2 MB, so I couldn't do it.

  I also tried the insyde recovery solution. I don't know the name of the file for recovery.
  I looked at the file of bios with a hex editor, but I did not find the name of the file (for example bios.fd or something)

  Please * don't * suggest to send laptop for service solution. I have to remedy in * 1-2 days * and the service is so far away from me and they work slowly. If I send to the service, I will not take the laptop for 2 weeks.

  What can I do, what is the procedure of work? If toshiba allow us to update the bios, they must support for the recovery, too. ASP is not a solution for every time.

  * Any * help will be appreciated.

  Best regards.

  Jin

  You should visit this site:

  www.theeldergeek.com/forum/index.php?showtopic=21209

  There was the user that was able to recover his above mentioned a500 forum reading.

• Pavillion g6 (g6-1b35ca: password recovery Bios for Pavilion g6 (g6-1b35ca))

  Hi, looking for a Bios recovery. Ive tried a few searches on my specific code, but nothing came. ID very grateful for help.

  83798393

  Thank you

  Jer

  Hello

  Please try:

  32690915

  Kind regards.

• recovery BIOS for hp pavilion g series

  has obtained the stop of 83130496 code

  Thank you

  Try Tom.

  32898418

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Updating BIOS for Satellite 1625CDT with XP Pro

  OK, I bought a new 256 MB of ram, when tried install it requested update of the bios. I find the update of the correct bios for her. When I try to update the bios, it is said that it can be run in 98 and 2000, I have xp pro. I also tried to start exploitation f12, it did nothing but initialize and beep at me a lot.

  How can I update the bios without having to install a new os (especially when i cannot reinstall pro because of no installation disc or recovery)

  Help, please

  Hello

  I checked the page of the Toshiba driver and there is a single place BIOS:
  This is version 1.11 of the 18/11/02.
  Have you verified that the BIOS Toshiba upgrade document?
  Please check. You will find this under the FAQ section on the support page.
  You will find the proper procedure the update of the BIOS.
  As far as I know, is a procedure to upgrade the BIOS 6.

  But I don't know if the upgrade of the BIOS allows you to use a memory of 256 MB.
  I found some information that this device can handle only modules memory 32 MB, 64 MB, 128 MB and max 160 MB memory.
  In this case you cannot use the module memory 256 MB

• Recovery BIOS on Satellite C660D

  Hello

  I recently tried to update my bios (because I got a message from tempro tell my TI needed updateing) who left my laptop C660D effectively dead - blank at the start to the top.

  I am trying to create a crisis recovery disk and the direction I got on the net tells me I need to extract the. The correct BIOS ROM file update for my laptop and add it on the crisis recovery disk.

  However, when I unzip the update of the Bios for a c660D Tosh, I see that there are 2 folders, each with 2. ROM files in them.

  File SAY

  BIOS.rom (2048KB)
  EC.rom (128KB)

  Dossier UMA)

  BIOS.rom (2048KB)
  EC.rom (128KB)

  The files with the same name in both folders watch identifical to one another. but can someone counsel who is the good ROM I should fall on the crisis recovery disk

  Thank you very much
  Eddie

  Hello

  From my point of view regardless of its file BIOS.rom you will take for two looks identical

• Updating BIOS for Satellite C660-1TK

  Hello I want to ask if it is possible to update THIS embedded controller
  My laptop Satellite C660-1TK (PSC1QE-01900GGE) use the american megatrends BIOS

  In the last time of flashing the bios part CBS not do update...
  I'm currency have BIOS 1.50 version
  EC 1.40

  Have some computer problems not runnig well, turbo technology boost does not not work my video driver stop working, card slow wifi speed of my PC, Synaptec touchpad stop / start working randomly
  I try evrything recovery win 7 no help now im using win 8 with the latest drivers ogical
  and its always the same...

  BUT Toshiba will update the version of bios for this model soon?

  Hello

  > My laptop Satellite C660-1TK (PSC1QE-01900GGE) use the american megatrends BIOS

  This is a European model for Toshiba laptop and the latest available BIOS can be downloaded from the Toshiba UE driver page.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  The latest BIOS for this series is currently 1.50 - winner BIOS
  If your BIOS is already up-to-date.

• helps recovery Bios X121e (x120e x130e)

  Hello world. After my x 220 thread was left unanswered, I hope I will have better luck with it.

  I need the procedure for recovery of bios for x121e (x120e, x130e).
  IM in brick, and no method found in guides for wincrisis do not work. I think that I can't enter the bios recovery mode no mather who combinatiom of the keys I use. Nothing happening just to the fan spins and the laptop does not read my USB (usb led flashes for less than a second and that's it.

  It would be very useful to anyone recovered x121e post here.

  It means anything, its with amd e450 apu and its Japanese version, which has the Japanese keyboard.

  Kind regards

  [Solved]

  The fixed!

  So for everyone with the same model and same problem: it turns out that this bios don't really boot block. If the bios failure = brick Clipboard without recovery options.

  But here's how I solved mine. Bought a SPI programmer, ic clip (soic8), some test wires and fact adapter to connect the programmer ind clip. Had some problems and also had to change downloaded bios because I didn't have the right backup but after little playing, he shot straight up. If you have good rom backed up, flashing should be easier. It is the solution for those who have more technical, but much easier than the chip soldering skills.

  [url =http://postimg.org/image/646cgp0kr/] [img] http://s25.postimg.org/646cgp0kr/IMG_20150220_215643.jpg [/ i... ]

  [url =http://postimg.org/image/5ov2noenf/] [img] http://s25.postimg.org/5ov2noenf/IMG_20150220_215632.jpg [/ i... ]

  [url =http://postimg.org/image/jjtd6592j/] [img] http://s25.postimg.org/jjtd6592j/IMG_20150221_022114.jpg [/ i... ]

• Help! Maybe I need the recovery disc for pavilion d4790y... + I think I messed...

  I had problems with my office for awhile now, think it might be a fan, virus, hard drive or ram as in my previous post... the computer would freeze/crash or not stop, requiring a firm hard. trying to reboot/restart computer, it would beep several times until I have let it sit for a few minutes, then everything was back to normal (found that might have been an error in the BIOS after all this happened)...

  Now, I have NOT touched or replaced all the components on my computer at all. Nothing! Now I have a debate on the upgrade of OS and RAM, but did not decide whether it was worth on this older machine. So I have done no amendment or change in software. the only change I made to it was not renew norton and goes with vast (free).

  The other day, it suddenly wouldn't boot Win Vista 32 in all. My monitor at startup (before config utility appears) had colored vertical lines across the screen. I immediately thought 'virus' or ' fan isn't card graphic blown is screwed/false driver downloaded... I enter safe mode with network, no problem with the monitor (no lines) and tried driver restore, but also to download nividia the updated. Nothing seemed to work except safe mode (s), system configuration, start the Setup program, CTRL I (don't remember which menu is), & screen of the system restore/repair/diagnose. I tried all the reboot thing pilots config, patterns of change (hard disk only), boot it. When you go to the splash screen (a back screen on startup), no line either... I tried the system restore, did not a thing... I tried the verification of diagnosis, all right... all equipment, the repair of the system did nothing...

  So I take the side box power off to check the components inside to see if any wiring was loose, fans not working/salty, etc... everything OK there besides fan a little dirty. Clean, same thing. Here comes the fun part...

  Now, I backed up all my files and 'backup' on my external hard drive... I thought that I had made the recovery discs or he had came with it when I bought it... I changed the configuration settings RAID0 by removing the old installation and turned to the raid no drives. Then, I created a RAID0 again... I guess you know where this is going...

  He said now insert the boot cd... Now, it of not anything but let me in Control Panel and change the startup preferences...

  I have no recovery disk or I can't find what happened if I have... with backup (for USB) external drives will not work... I kind of looking online hp without result and I saw some online, but that seems pretty shady, especially with the case of the OS...

  I will not buy another office, if I can help it, but I need to know if there is something I can do?

  Thank you

  .

  Hello:

  Yes, I've been able to do it once, but you also need an operating system installation disk. You need a USB FDD + OS installation disc and the correct drivers of course on the floppy drive.

  You can use a recovery for this drive yet. It must be an OS installation disc.

  Yes have ultimate could be a problem. If you enter your model number on this site of surgeons in the computer, you get a lot of options showing the recovery disks for different versions of the OS, but only had listed actually drives.

  You need to call HP and ask or email these surgeons computer guys and see if they have the recovery disc for ultimate games.

  Paul

• Update the BIOS for HP Pavilion M9400f

  PC desktop, HP Pavilion Elite 9400F

  Windows 7 64-bit.

  Error message: Incorrect for your system (253) Bios please contact support.

  I use the bios upgrade HP site says to download for my PC, but the upgrade works only with a card mother M2P61PM-HM.

  Mine has a motherboard M2n68-(NARRA3) and the latest bios for this motherboard does not support Windows 7 and is abandoned.

  My system black screen constantly when out of mode 'sleep' and upgrade the bios addresses that issue.

  Try to use the BIOS Nettle3 update on the card mother Narra3 will cause problems. Most of the time that BIOS HP update routines is written for a specific operating system and will not install on other operating systems.

  Make sure you use the update of the correct M2N68LA BIOS for your motherboard Narra3, several different versions of the M2N68LA were made (narrated, Narra3, etc.)

  Please put back the computer it's original Vista OS to install the M2N68LA (Narra3) update of the BIOS. After you install the update, you can return the system to Windows 7. Make it easy and not lose all personal data, disconnect your Windows 7 drive and a blank disc. Using the recovery DVD, install Vista. Update the BIOS. Disconnect the Vista disc, and then reconnect the player to Windows 7. You should be good to go.

• Recovery disc for a pre-installed Ubuntu 14n (only) flag

  I bought a HP Pavilion 14-n258tx Notebook PC provided with Ubuntu preinstalled OS. A DVD of Windows 8.1 bought separatel with 8 GB of memory.

  I've manually updated Ubuntu to 14.04 faithful version. I created a new partition and loaded Windows 8.1. The laptop doesn't have a touch screen support. However, I do not use the 'Metro' Windows 8 features. My tablet is for that. There are a few features provided with Windows 8 "non-metropolitan" mode and I pretty much enjoy using 8.1 exclusively in mode "W7". I want to get out of dependence on Windows but appreciate having a Windows backup with the new unix environment.

  The BIOS has been F66 of Windows.  Update drivers through Windows via the HP support was simple. There was a problem with the Intel graphics before 2013-11-25, Version10.18.10.3325, updated 158,03 M always on the HP site. Graphical display would turn and the movement of the mouse was "sticky". An e-mail, I managed to come back from HP support that somewhere might suggest only there could be a problem with my system fan. Be sure to get updated 04/10/2014 of Intel 10.18.10.3907 now available via Windows update, which issue is resolved. Missing NVidia drivers are on the HP support site. I adapted my missing Bluetooth drivers to the preinstalled Ralink wireless driver.

  There was a HP_Tools partition which was lost very quickly to try to set up the dual boot. Confusion about the problems in the implementation of Grub2 has resulted in some attempts to complete reformatting/reload. Apparently this isn't Windows 8, which was change my setup dual boot on its own but, I am told, the bios of HP...

  "the problems you are experiencing are related to some known bugs in the implementation of HP EFI. "Basically, the firmware is hardcoded to start the bootloader from Microsoft and which make it difficult, if not impossible to boot from anything else.

  I have to live with it, finally begin directly in Windows and access to Ubuntu throgh esc/F9. I think it's quite precarious and likely to lose a lot of setup work by maybe an update has failed. Some documents on what's happening, or how to disable HP of W8 feature protection can be useful.

  I downloaded the UEFI environment. I told him to put it on a USB key, but it recharged HP efi files in the system partition despite. This is apparently not a problem...

  (No legacy support, secureboot and off quick start)

  End sector number of sectors system partition boot sector
  / dev/sda1 2 048 1 050 623 1 048 576 EFI system partition<  ="" plus="">
  data 665,833,472/dev/sda2 1 050 624 666,884,095 (Linux) partition
  / dev/sda3 1,448,515,584 1,465,147,391 16,631,808 swap partition (Linux)
  / dev/sda4 666,884,096 data partition (Windows/Linux) 781,631,488 1,448,515,583

  but I lost my key F11 on startup diagnostics that are only partially resumed through HP efi files.

  Apparently by my purchase of a single system preloaded Ubuntu Windows acquired separately, Miss me some features of Windows HP for the features below:

  HP utilities: can't see, Play, system event... confusing whether they are present or not

  some Cyberlink: "InstallShield Wizard is not a valid HP drive. The installation program stops now. "

  and imortantly...
  Windows Recovery 8: does not load message of incompatibility.

  RECOVERY

  originally PC only Ubuntu:
  Should I make wiping out shouldn't it be a recovery partition or a recovery disc to reload the original drivers in order to recharge then Ubuntu via a live recording?
  I should be able to recover my F11 diagnostics with that?

  Where can I retrieve F11?

  Windows 8.1:
  Yes, I have the disk Windows 8.1 and should be able to reinstall if necessary on the partition.
  I went to mine for the full recovery of the system of Windows 8?

  Or that is my problem of recovery environment mentioned above)?
  Wiped out I should wait to retrieve my comprehensive system drivers, etc. and Windows through my Windows system recovery?

  This certainly proved to be the learning experience than I expected! :-). This support site and the forum has been very useful. I'm very happy with the result. I could try to make a double machine (VMWare).

  Thanks for the help so far to have me almost through this.

  In the off topic about the Intel graphic display bug which results in putting on and off the screen (she came back! again), I guess its due to some incosistency between graphics and power features. Unfortunately, prevent the Windows driver updates prevents all updates driver that allows me to remove Windows Intel/use generic display make it impossible to solve other problems of driver (such as USB network emulator) and I had to disable the Intel graphics card so NVidia will not find his companion and I get just Windows base. I'm calling ths problem very soon.

  But the problem to avoid something that I didn't know before. That already by erasing partitions Windows or Ubuntu reloading Windows or Ubuntu will load the proper minimum drivers and from there I should be able to do all the updates for the drivers of HP for Windows or Ubuntu drivers I have installed manually from Ubuntu. And I now have enough backup for both OS/driver.

  Am I wrong in thinking that these system recovery discs won't boot your laptop won't start plu?

  And I deadended somewhere in the link of Malygris:

  Get a USB HP recovery disc or HP recovery disks with or without disc rec instructions

  above. I'll try once more...

  So I'm still very confused do not have diagnoses of the base system (via the TOOLS HP F11) for critical maintenance, update the bios and other tools for the recovery of corrupted system bios and the inability to start.

  (1) I can't HP_Tools to load on a USB key. Is it because I have got a usb BOOT drive? I am simply create a 20 GB fat32 partition called HP_TOOLS w / or w/o a drive letter on a spare 120 GB external USB and HP tools cannot find or create the partition of HP tools. It doesn't have to be loaded in a similar partition created from a shrunken Windows partition or create a partition on my hard drive as well.

  2) what facilities relevant to the boot/recovery should I expect the disk of "fast food" that I was informed (above) to get again the representative of HP on the phone says is not available to me for my model?

  (3) why can't I load the recovery of Windows 8 DAS?

  For my model:

  Drivers HP Pavilion 14-n258tx notebook PC

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=th&DLC=en&sw_lang=&product=6883259

  I'm going to Software Solutions

  Download: Microsoft Windows 8 recovery environment (RE) Recovery Manager Installer

  2013-10-04, Version6.00, 384,41 k:

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63774.exe

  When I open it, I get what I expect to see:

  TITLE: Windows 8 RE Recovery Manager install - TDC

  VERSION: 6.00 REV: A
  DESCRIPTION:
  User can boot to the Windows recovery environment and use "HP Recovery Manager" for units of recovery or backup files. The recovery feature are include 'System Recovery', 'Recovery of Image reduced to a minimum' and 'Factory Reset '.

  PURPOSE: recommended
  SoftPaq NUMBER: SP63774
  ENTRY INTO force: 4 October 2013
  CATEGORY: N/A
  SSM SUPPORTED: YES

  S/O SUPPORTED DEVICES:

  Prerequisite: no

  IMPROVEMENTS:
  -After the win8 to win8.1 upgrade, user starts to WinRE by F11 and will take much time.
  The SoftPaq reduce time waiting during boot to WinRE or start HP Recovery Manager over winRE.

  HOW TO USE:
  1. download the file by clicking on the button 'Download' or 'Get software' and save the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

  2. double-click the downloaded file and follow the on-screen instructions.

  After agreeing a DOS windows appears and disappears too quickly to read.

  It is not retrieved under c:swsetup or anywhere else.

  Can YOU please CHECK WHAT PACKAGE and advise how can I load the environment HP Windows recover. ???

  (4) I note there are other errors on this page of the driver, for example, Cyberlink Power Director is listed under software solutions but its download links for one download for another program.

• Find the update of Bios for Omni 27-1007 ev

  Hello

  I'm about to upgrade my Omni to Win 8 Greek model and it is suggested that updating the BIOS first.

  Problem is when I search English support pages for model HP 'ev' it returns a model not found error. When I select Ellada (Greece) as the site of research and the translation of the page, no software-driver-support links works. If I don't translate the page and then there is strangely no connection with the software and drivers, only announcements of new hardware, etc. I can read Greek, so it's not like I can't find the translated text.

  Can someone tell me the latest BIOS for this model or provide a direct link to the info/downlaod BIOS page.

  Thank you, Rob

  Here is the HP Business "drivers and software download" page for your Omni 27-1007 ev Desktop Computer HP. The version of the BIOS available for download is 7.11 rev. A, dated October 3, 2012 date. This update of the BIOS fixes;

  problems with the function of brightness,

  problems with 520 M from NVIDIA and 540 M graphics cards,
  and problems with the temperature of the processor and the fan during the recovery from the sleep mode.

• Re: Can not find the latest version of the BIOS for my Satellite A300 - 1 2

  Hello world

  I'm looking for the latest BIOS for my living room Satellite A300 - 1 g 2 (PSAGGE) I can't find any BIOS to the dl page.
  Maybe someone is able to help me.

  See you soon,.
  ezsolt

  Latest version of the BIOS, you can find on BIOS download page - http://www.toshiba.eu/innovation/download_bios.jsp

  Check it out.
  By the way: is there a reason to update the BIOS? You have problems with your machine?

• Operating system to load BIOS for Satellite Pro A200

  Hello

  I have a PSAE4E - 03300WEN Satellite Pro A200 with V5.30 BIOS and Windows 7 SP1 32 bit.
  I improved the T2330 CPU to T8100 and thought to update the BIOS for increased functionality.
  But in the Toshiba download page, I get the following 3 options:

  2.60 - WIN32 this Bios is only compatible for portable computers with Windows Vista! (32-bit only!)
  2.60 - WIN64 this Bios is only compatible for portable computers with Windows Vista! (64-bit only!)
  5, 60 - WIN this Bios is NOT compatible for notebook computers equipped with Windows Vista!

  And the question is...
  What about Windows 7? I should stick to V5.30 or go to a newer version? :-/

  See you soon!

  > I improved the T2330 CPU to T8100 and thought to update the BIOS for increased functionality.

  First of all laptop manufacturers (any manufacturer it is) don t support CPU updates.
  Of course, you can replace the CPU but it's your own risk.

  But what I mean is that updates of BIOS don't provide additional functionality or improves which would increase the functionality after upgrade CPU and this means that the BIOS update is not necessary to obtain better performance even after upgrade CPU.

  However, certain phrases on your BIOS question:
  5.60 BIOS seems to be released for portable computers running Win XP:

  Other versions of BIOS (v2.60 32-bit and 64-bit) are released for Vista systems I guess that this version should be compatible with Win 7 since its more similar to Vista to Win XP

  However, you changed the processor and consequently the hardware configuration is different now, I can't say for sure if the BIOS update would be the best option in this case