RECOVERY CD CAN NOT DETECT THE HARD DRIVE

Similar Questions

• When you try to re - install Windows XP, it does not detect the hard drive.

  Hi all. I tired to do a reinstall of Windows XP today. It seems to take a lot of time, and then I did a very stupid thing. I turned off the laptop that I had to go. Now when I try to start the laptop on the cd, I get as far the screen where I have to press on enter to install Windows XP pro on the system or press R to repair. The problem is that there is now no facilities to choose from in the box below and the system is not recognizing the hard drive. I can't even as much as the screen to format the drive. When I press ENTER to install windows xp, then I get a blue screen telling me that the system shuts down to protect my pc. Is anyone able to tell me what to do to solve this problem please. Thank you very much in advance for your help. Noel

  original title: I did a stupid thing... Windows XP Pro

  Sounds like a hard drive problem then. Your drive is maybe defective. First of all, you can use the partition of diagnostic Dell (F12) for its determination.

  In case there is a SATA problem, press F2 to enter the BIOS and change the setting of hard disk SATA to legacy. (Might as well try this first.)

• Can not find the hard drive on the A200 Satellite during the xp installation

  I have a Satellite A200 (PSAE3E).
  When I try to install Windows XP it prompt can not find any hard disk.
  How can I install win xp?

  Just visit Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. On the download page to choose your laptop model and download Storage Manager.

  Reserved for the installation of Windows XP Home edition to the Please Windows XP Home with Service Pack 2. When facilities procedure starts press F6 button and load the driver SATA (floppy) and the HARD drive will be visible and you will be able to continue the facilities.

  Good luck!

• Cannot install windows XP it said hard drives are not connected & windows can not find the hard drives

  I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.

  The answers will be appreciated...

  Thank you

  Because the Windows XP installation CD does not have the necessary disk controller drivers.  You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation.  A CD of Windows XP with SP2 included may have the necessary drivers.

  John

• XP operating system recovery CD does not recognize the hard drive. __

  Reinstall XP with recovery inserted CD. At startup, autorun starts and starts to download. Immediately after selecting the partition to be formatted, I get instructions that the hard drive is not recognized? I have no problems with the computer, I just want to clean install and remove years of unnecessary work... whats up?

  Hi, the drive must be erased all traces of the file system, that is why XP would not move.

  Download and burn to cd Darik Boot and Nuke. Start and wipe the drive hard when you are finished it will appear for XP like a new hard drive.

  http://download.CNET.com/Darik-s-boot-and-Nuke-for-CD-and-DVD/3000-2094_4-10151762.html

  Slan go foill, Paul

• LabVIEW can not detect the network drive so that other applications can.

  All network drives are mapped correctly and another application such as micro soft office or windows explore can see the correct mapping LabVIEW can not see the mapping? No idea how to solve this problem?

  -VS

  The solution: Add EnabledLinkedConnections to the registry

  https://TechNet.Microsoft.com/en-us/library/ee844140 (v = ws.10) .aspx

• Help me. H700 RAID does not detect the HARD drive.

  Hello everyone!

  My Dell C2100 used CPU X 5650 and 700 Raid Perc.

  After connection, system says:

  "Enclosed envelope does not support in the direct mapping of the controller mode.

  Please contact your system.

  System was interrupted because of the supported configuration. »

  I replaced the H700 raid, then wire and FW update. System not notification but after press Ctrl + R, perc raid h700 not detect any hard disk.

  Please help me!

  TKS!

  TrungDV

  The issue is due to backplane having a bad rider on the expansion of the plant.  To correct this remove J15 the C2100 3.5 "bottom of basket, or backplane C2100 2.5 J7".  Refer to the below pictures to help locate the jumpers.

  3.5 "

  

  2.5 "

  

  Let me know if this helps solve the problem.

• M30X bios does not detect the hard drive, won't start HD

  Can someone help me in this problem.

  My satellite m30x hard drive won't boot, rather trying to boot from the network.

  Tried to load the installer by default, and Hd will not appear on the settings

  tried original reistal toshiba software CD and the message that no target disk appears

  Is this really a hardware problem, some conection fisical damaged, or is it a bios problem

  Thanks in advance for some light on this problem

  My M30x has the same problem. I just used 2 months.

  I sent it to the repair center as I was told to do, because it has guaranteed.

  I'm still waiting for a response from them. I don't know what caused it.

• Equium - does not detect the HARD drive more

  I just got this Toshiba 1 TB HARD drive and it has worked well so far... it's the thing like that

  Computer detects something (no dolls just the standard plug and unplug a usb) and that's it. Cable is fine, it is in the rear port USB 2.0 into a witch, he has always been, without modifications have been made to the operating system (this is a computer storage without an internet connection).

  Any suggestions?
  Thanks in advance for you're time

  Hello

  Maybe you should post more details about it:

  -Exact cell model
  -Is an external HARD drive?
  -If Yes, what is the description of the exact model?

  However, you may try another USB cable. I had a similar problem and the reason was a faulty USB cable.

• My computer does not detect the hard drive or show

  Hey Microsoft,

  So, I have a Windows Vista laptop and earlier this year, my computer suddenly won't detect or display my CD player. And when I go to disk management, there is no assignment of letter or anything, just an empty space. Please help me! Thank you!

  -Maryse

  Hello

  1. you are using an external CD/DVD-Rom?
   
  2. What were the recent changes of hardware or software that are performed on the computer before the question?
   
  Please follow the links below t help solve the problem.
   
  Method 1
   
  Run only the automated fix this program from the article mentioned below.
   
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
   
  http://support.Microsoft.com/kb/314060
   
  Method 2
   
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  I hope this helps.

• Can not recognize the hard drive

  I just bought a dell precision ws370 without an operating system.  When I try to install windows xp pro, he says that I don't have a hard drive.  The system has a hard drive of 80 MB SATA WD.  I guess I need to install SATA drivers, but I don't have a disk resource.  Is there another way I can find and install these drivers?

  
  

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• the Windows xp Setup program does not detect my hard drive

  When I try to install Windows XP, it does not detect my hard drive which is visible in the bios.  My bios options are very limited, but I was able to use the bios to change the sata in ide.  It still does not work, and now he is not found with the disc of windows 7 I have.  This isn't a new pc.  He was working at a given time, but foolishly, I formatted the hard drive and have no drivers for my drive hard hitachi.  I bought a new seagate Mak, but now this disc hard is not allocated and is also not detected.  I have no way to get an operating system and I'm in a jam financially... Please help.

  SATA drives are not recognized by Windows XP installation disc.  Change the BIOS SATA ATA sometimes solves this problem and allows you to install and sometimes does not.  Microsoft's solution is to press the F6 key when you are prompted for additional drivers, and then insert a floppy disk (Yes, it takes a floppy) with the top driver.

  "Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
    <>http://support.Microsoft.com/kb/314859 >

  Several means have been formulated to work around needing a floppy disk.  You can view the following items:

  'Install Windovs XP on SATA without floppy (F6)'
    <>http://News.Softpedia.com/news/install-Windows-XP-on-SATA-without-a-floppy-F6-47807.shtml >

  "Install Windows XP on a SATA hard drive"
    <>http://en.kioskea.NET/FAQ/2544-installing-Windows-XP-on-a-SATA-hard-drive >

  HTH,
  JW

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• Windows CD can not find installed hard drives

  I have a PC that has windows XP installed and worked well and I have DSL so I kept it updated. It has been updated for the updates. It was a month that it seemed hung on a windows update and I've finally powered down to exit the update mode. After that, he would finally in XP but would not other that the busy when an icon is clicked. I decided to reload XP using the same CD I used originally when I built PC. It will load the drivers to install XP, but when installing windows is selected it says no hard drives found. When booting 2 HARD disks are displayed, but are not detected when you look in the BIOS. I've tried changes in the BIOS as auto detect HDD including default BIOS and not go. I remembered to change a partition using Partition magic 8.0 and decided that might be the problem, so I started in the magic of partition and formatted part C of the HDD in NTFS, but the results are the same. Any suggestion is appreciated. TIA

  Do you mean you see a message like this?

  Setup did not find any hard drives installed in your computer. Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running. Setup cannot continue. To quit Setup, press F3.

  If the disks are not appearing in BIOS, it seems unlikely that XP will be able to see them no more.

  Describe the best you can, your hard disk configuration...  IDE, SATA, SCSI, RAID configurations...

  You build the hardware yourself or is it a system store bought?

  Are you able to determine when the system turns on, the brand and model of your motherboard and the BIOS it is running?

  Without more information, I can only offers these general reflections where to search:

  When you see a message like this, obviously the XP installation starts to load, but then when the installation program needs to go out and find your hard drive is not find the hard drive.  It means not necessarily your hard drive is defective and if it worked before, it's probably still plugged.  It simply means that the installation of XP is not able to find it.

  Looks like you need enter the BIOS on your system by pressing the 'Delete', F2, F10 or F12 key (what the key is good for your system), find the section where the types of hard disks and hard disk interfaces are configured and temporarily change the setting so the XP installation is able to find the hard drive.

  Where to find the accommodation and how to change depends on your system manufacturer and the version of the BIOS, so you end up having to look at her.  If you know your system brand and model, we can probably help you find a job.

  You must locate and change the interface mode to your hard drive in the BIOS so that when installing XP loading, it will be able to locate the hard drive.

  Before making adjustments, you should take note of what are the current BIOS settings, so you can change when you are finished.

  The adjustment varies so here are some examples that I have accumulated:

  The adjustment is done in the BIOS and could be in Integrated Peripherals, Configuration of SATA, SATA Mode device.  After you make the changes, save them and restart your XP installation program.

  If you find that the mode is set on the RAID/SATA mode, change the IDE mode.

  If you find that the mode is set to AHCI, change the ATA mode.

  If you find that the mode is set to AHCI emulation Mode, change the IDE emulation mode.

  If you find that the mode is set to SATA, SATA mode off or change the ATA mode.

  If you find that the mode is set to SATA Native Mode, disable the native SATA Mode.

  If you find that the mode is set on AHCI/RAID Autodetect, change the combination mode.

  If find you the setting that works for you, I would like to know what it is so I can add it to my notes.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!