Recovery Copyright OS 8 times merged partitions recovery in other partitions
Could you please help me one more problem.
My laptop is copyright OS 8. When I divided the 700 GB partition
into 3 partitions (C, D, E) to the desired capacity (100 GB, 300 GB, 300 GB).
But then the OS cannot be opened. I've converted type GPT to MBR disks
format to install the new OS but the recovery of scores accidentally merged in other partitions.
Now I can't use the original OS yet. Then I installed OS 8 of Dell (I know
Copyright BONES embedded in the BIOS of the laptop).
And I tried in vain several ways to recover the operating system of the key copyright.
Could you tell me to resolve the situation to go back to the original OS.
Could you please check the key of this laptop Dell system.
Looking forward to your help.
Thanks in advance
If you need the key only for product activation, see here:
and here:
If you need clean install, you need either a Windows 8.1 .iso to detail that requires purchasing a license of the retail Windows 8.1, borrowing from a friend or informal download (deprecated) sources or you need a Dell Windows 8.0 reinstallation DVD/USB (recommended). In the case of the USA or the CA, you can fill in the following form:
If outside these areas, you need to call Support technique Dell.
Tags: Dell Software
Similar Questions
-
Merge Partition - Space Question
We have a large table in 10g which has been partitioned from list. As the time has passed data with a valid value is not in any of the lists of the partitions has been inserted several times. These data fall into the default partition
So we have something like this:
Table ERRORS
Partition E_1 values ('A', 'B', 'C')
Partition E_2 values ('L', ', 'n')-size 600G
Partition by default E_DEFAULT (but contains data of a single value 'Z') - size 50 G
Now the seller would like to fix this by adding the values of 'Z' to E_2.
They offer the following:
ALTER table split partition (partition E_TEMP, E_DEFAULT) E_DEFAULT ERRORS;
ALTER table merge E_TEMP, E_2 partition in partition E_2 ERRORS.
I'm fine with the strategy. I have no doubt that it will work.
I'm afraid that because the size of the partition is so great the merger will require a 650G extra free in the tablespace. Sellers seem to think that it will just add the 50G to 600G.
Looking at the documentation, the merge partition section shows:
"Use the
ALTER
TABLE
... MERGE
PARTITION
statement allows you to merge the contents of two partitions into a single partition. "The two original partitions are deleted, as are all the correspondents index."This means to me that it takes two and creates a third, thus requiring the 650G of extra free space.
But is this always the case if the third partition is actually one of the two being merged?
For what it's worth, my plan was:
Failure to Split
Change the new partition with an empty temp table
remove the new partition
Edit E_2 to add the new value
Insert ERROR select * from temporary table.
drop temporary table
I think that this requires free space of 50G.
Thank you
My main question, however, and this that I can't test (or do not know how to test) is the solution of partition of merger proposed by the seller requires free space equal to two partitions (in this case 650G) original to work? The seller says no. I think, but can not find documentation or evidence, Yes.
If the seller says no, ask them for proof. I'm not aware that the internal process has been documented. But you should be able to test quite easily.
The only reason why a new segment will be created being is if the data would actually be moved. In order to test whether the data is transferred.
If the data is not moved, it's the same segment as before.
1 put a line in P1 - examine the IDENTIFIER line
2 put a line in P2 - examine the IDENTIFIER line
3 MERGE P2 P1
4. determine if the data transferred - what ROWID changed?
The ID will be different if the data has been moved to a new segment.
create table part_list (State varchar2 (2))
list partition (State)
(values of partition p_ca ('CA'),
values of partition p_wa ('WA'),
values (default) partition p_default
);insert into part_list values ('CA');
insert into part_list values ('WA');
insert into part_list values ("NV");
Select a State, rowid RID, DBMS_ROWID. ROWID_RELATIVE_FNO (ROWID) fno,
DBMS_ROWID. ROWID_BLOCK_NUMBER (ROWID) blkno,
DBMS_ROWID. ROWID_ROW_NUMBER (ROWID) rowno
of part_list
STATE, RID, FNO, BLKNO, ROWNO
CA, AAAV71AAEAAAAs0AAA, 4, 2868, 0
WA, AAAV72AAEAAAAtEAAA, 4, 2884, 0
NV, AAAV73AAEAAAAtcAAA, 4, 2908, 0
ALTER table merge partitions p_ca, p_wa part_list in the p_ca partition
Select a State, rowid RID, DBMS_ROWID. ROWID_RELATIVE_FNO (ROWID) fno,
DBMS_ROWID. ROWID_BLOCK_NUMBER (ROWID) blkno,
DBMS_ROWID. ROWID_ROW_NUMBER (ROWID) rowno
of part_list
STATE, RID, FNO, BLKNO, ROWNO
CA, AAAV74AAEAAAAtjAAA, 4, 2915, 0
WA, AAAV74AAEAAAAtjAAB, 4, 2915, 1
NV, AAAV73AAEAAAAtcAAA, 4, 2908, 0
Note that the ROWID for 'CA' and 'WA' values are different. This means that the lines have been moved. The file number is the same, but the block numbers have changed as to have the line number for 'WA '.
The fact that existing lines have been moved at all should answer your question about what really makes Oracle. In other words, is NOT just to add the 'WA' line for the existing partitions.
If you do a SPLIT, but the data of the existing partitions is NOT affected, no data movement is performed. Check this example and see that all existing ROWID components remain the same
ALTER table part_list split partition p_default ('OR') values
in (p_or partition, partition p_default)
He has not given "GOLD" in the partition by default so that Oracle has simply ignored this segment and created a new one for the new partition.
-
HP pavilion ab-516tx: disk recovery and other readers gets automatically complete
my disc recovery and other readers to complete slowly as I began to work, is there any virus or it is an internal problem.
can you help me out of this, is there a solution?
Hi @Sahilchhabra,
Please become a member of the HP's Support Forums. I understand that you have disk space issues. I'll be happy to help you.Please see the following documents.
Resolution (Windows, 10, 8) low disk space errors
Screening of hardware failures (Windows, 10, 8)
As to your question about a virus here is a link that may help.
Computer may be infected by a Virus or malicious software (Windows, 10, 8)
Please keep me informed of the progress of things.
If you need help, let me know and I will gladly make all that I can to help you.
Please let me know if that solves the problem by marking this post as "accept as a Solution.
To simply say thank you, click the Thumbs up below!Thank you.
-
Play a playlist or album adds the first song 20 times and none of the others
I have an iPhone 6 and you have a subscription to the music of Apple and iTunes Match (had one before the subscription of Apple's music). When I try to play an album or a playlist, the first song from the album or playlist will play 20 times, but none of the others. This also will show the list of "to - go".
I have the latest version of installed iOS (9.3.2). I already rebooted my phone, but the problem persists.
You probably accidentally hit the icon repeat at the bottom of the expansion, now playing screen. It is very easy to "Repeat 1", in which case it will be play the same song over and over again. I did this more than once myself.
See you soon,.
Jeff
-
I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems. Now get the error 'you cannot install an Adobe product at a time. Please fill the other installation before installing... "There is no other Adobe product install. I have used the cleaning tool Adobe several times and uninstalled other Adobe products, but none worked. I have uninstalled/reinstalled this version of Dreamweaver CD several times when changing computers and after you had computer problems. A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues. Help, please.
A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You're misinterpreting things. Activation does not happen when you simply run the installer, although later. This means that what he says - there is another 'install' pending / assets on your system, which means somewhere, there is a process (invisible) always blocking things. Whatever it is, since you have not provided any real technical info, we can not advise specifically. If you are using Windows, you can check your task manager and to terminate any process setup.exe and msiexec.exe more potentially will need to manually fix / remove some registry keys. What beyond this, you will be much more accurate.
Mylenium
-
Can I combine the recovery with other Partition?
Recently, I upgraded my Dell Inspiron to Windows 7 with the upgrade in free option. However, I was wondering if there was a way to merge the recovery with the primary partition partition so that I can use this space with the main partition. Any ideas?
I don't think so, the extended Volume space can be merged to the main partition.
Acronis Disk Director Suite allows you to merge... I had ealier. -Ramesh Kumar http://www.WindowsValley.com -
Merge Partitions disk0s2 and disk0s4 (leaving disk0s3)
Hi all
As the title says, I need to merge disk0s2 and disk0s4 without touching disk0s3 because the latter is my recovery partition. I dared not try, but I guess I can't use this command in a terminal because it also merges disk0s3:
diskutil mergePartitions JHFS + disk0s2 disk0s4 NewName
now when I type the command "diskutil list", I get this:
List of the Asger$ diskutil
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 320,1 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_HFS Macintosh HD 278,5 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Apple_HFS BOOTCAMP 40.6 GB disk0s4
As I am on El Capitan, disk utility does not either because apple has changed a useless poor beta as a program on El Capitan.
I have considered just by typing the command merge above and then reinstall it somehow Apple_Boot Recovery HD, but I really don't want to go that route if possible.
And no, assistant Bootcamp can do since the Bootcamp partition is already deleted and formatted in JHFS +.
Any suggestions?
backup your computer with Time Machine
boot into recovery mode
OS X: on OS X Recovery - Apple Support
reformat the hard disk
Reinstall the OS of the recovery mode which will restore the operating system provided with your computer or use a bootable OS 10.11 Installer
https://support.Apple.com/en-us/HT201372
Anyway your recovery partition will be recreated if it is not destroyed.
-
Is Time Capsule partitioning without danger for files?
Hello
I have more storage on my Macbook Air and am frequently warned to remove the files, but all the files on my computer are completely necessary.
I have a 3 TB Time Capsule. It is safe (and smart) to partition the Time Capsule and store files on this drive? I've seen conflicting reports on the partitioning of the time Capsule, if it's a good idea or a disastrous.
Any help would be so appreciated.
It is not normally possible to partition a Time Capsule. Get a regular external drive, put your files on it and thus save this drive.
(142546)
-
HP 15 F018dx: Using a HP USB recovery on other models
If I order a recovery usb Windows 8.1 HP for a specific model laptop... is it possible to also use this USB recovery for an additional HP laptop computer that is the same model or a model different recent HP that originally came with Windows 8.1? Thank you.
Hello:
If you order a usb for Windows 8.1 HP for laptop model specific recovery, it will work on another of the same model.
It will not work on any other HP PC.
The recovery media checks the BIOS and other unique identifiers, and if they do not gather, and then exit the Setup.
He'll even specific enough... as to my own situation... I replaced the Broadcom wireless card in my G1 of 350 HP with an Intel card (which is not available on the 350 G1), and the recovery process is gone until the end, then he erroneous reports that there is no driver found for the wireless card, recovery failed.
I assumed he would recover the laptop, and I could just install the Intel wireless driver. No dice.
-
Retrieve the data from the merged Partition
Can I recover data from the partition that was merged with primary or C?
Hi satpalsingh.chouhan,
Is there any way to recover the data merged into the partition.
There are many third-party programs that could help you in the task.
You will need to use your favorite search engine to find such a third-party program that could help you in the task.
Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
Satellite Pro C50-A-1E4 - how to merge partitions?
My laptop is a Satellite Pro C50-A-1E4 running Windows 7 Pro 64 bit.
In receiving a year ago, I replaced the hard drive with a 256 GB SSD. I partitioned in a 60 GB C drive and a 192 GB D the rest drive is the hidden restore partition.
I have install all the software on C and my personal stuff on D.
Now, the C drive is nearly full, but there are a lot of free space on D.Can you advise me how reallocate for example 20 GB from D to C with nothing to lose?
I would like to make a complete backup of the drive D.Basic support for Windows (seems to me) to sit on a hard drive where the bottles must be adjacent, but I'm assuming that does not apply to an SSD.
Any help and advice would be appreciated.
Thank you.
HaroldHello
I recommend you to use a 3rd party software called Gparted.
http://gparted.org/LiveCD.phpIts freeware software that allows you to change the partitions on SSD or HARD disk.
You can create a bootable USB flash memory key and might start Notepad to change the partitions.
This s really great freeware software.
-
Qosmio G20: Merge partitions
Hello, I have a Qosmio G20 with two hard drives of 60 GB. The first hard disk has two partitions equal, C: and E:. I would like to delete E: and only have C:.
I tried with Partition Magic and E: the deletion is no problem, but I can't extend C:Someone knows how to fix this?
Hello Rune
It's very strange because Partition magic is very powerful. Sorry, but if you have a problem with partition magic check their support or maybe the FAQ page.
-
Original title: how a clon particion system?
I have two partitions on my drive system: one with 54 GB (which is my system) and another partition with 240 GB. Both are dynamic partitions. The 240 GB partition is empty and I want to change my system to them without reinstalling everything. Or convert the two partitions into one, but the option to do this, appear in gray on my windows disk management when I right click on one or the other. Can you tell me how to solve one or the other?
I send data from the information system (sorry; in Spanish)Operating system Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack1 Compilacion 7601
Adicional de Descripción del sistema operating system not available
Faffa led operating system Microsoft Corporation
Number del sistema PCDE4NUCLEOS
System manufacturer system manufacturer
Modelo del sistema System Product Name
Type of sistema Equipo based on X 86
Processor AMD Athlon (TM) II X 4 B50 Processor 3100 Mhz, 4 main processors, 4 processors logicos
Version y BIOS American Megatrends Inc. 0801 date, 20/08/2010
Version of SMBIOS 2.5
Windows C:\Windows directory
Del sistema C:\Windows\system32 directory
Device \Device\HarddiskVolume2 fair
Regional config of the United States
CAPA of material abstraccion Version = "6.1.7601.17514".
Number of user PCDE4NUCLEOS\JOAQUINMORENO
Zona hours Hora of verano del Pacífico
Memoria fisica installed (RAM) 4.00 GB
3.25 GB total physical memory
Memoria fisica available in 1.83 GB
Memoria virtual 9.91 GB total
Available in virtual memoria 8.29 GB
Espacio archivo paginacion 6.67 GB
Archivo paginacion C:\pagefile.sysThank you:
Joaquin MorenoHello
1. What is the free space in the drives?
2. in which the Player is the operating system installed?
Post a screenshot of disk management SkyDrive so that we can analyse the question better.
See the site:
Cutting tool
http://Windows.Microsoft.com/en-us/Windows7/products/features/Snipping-Tool
You can use the Sky-drive to download the file. Check the link for the steps on how to download Sky-Drive.
-
My 27 "IMac just started running slow and has a hard time, opening of Yahoo and other sites
My IMac 27 "just started running slow and is struggling to open Yahoo and a few other Web sites. I bought it last August, but he has only started to slow market over the last two weeks. I have reset the pram, restarted with Cmd - R. I restarted in safe mode and as a guest and it still runs slowly. I have used Etrecheck, the only suspect think I wonder on "3.10 GB com.apple.WebKit.WebContent (5). What is webkit?
last week I installed 2 Apple airpot extreme and hard wired two airports and my mac, my wifi I and the entire system is running 5, speed, download upload, and ping 11ms. 8mbps 5.9mbps I uninstalled Silverlight, Lightroom and most of the apps I use, but I can't figure out the problem. Any ideas on what I can do to get my mac back to the current? I'm about to take my mac at the Apple store because she is still under warranty.
Kind regards
Rick
Top of page process of memory: ⓘ
3.10 GB com.apple.WebKit.WebContent (5)
698 MB kernel_task
Softwareupdated 475 MB
254 MB Solitaire
180 MB Safari
EtreCheck version: 2.9.1 (251)
Report generated 2016-02-03 22:56:23
Download EtreCheck from http://etrecheck.com
Time 01:18
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Another problem
iMac (27 inch, at the end of 2013)
[Data sheet] - [User Guide] - [Warranty & Service]
iMac - model: iMac14, 2
1 3.2 GHz Intel Core i5 CPU: 4 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
0/DIMM1 BANK
Vacuum
BANK 1/DIMM1
Vacuum
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: unknown
NVIDIA GeForce GT M 755 - VRAM: 1024 MB
iMac 2560 x 1440
OS X El Capitan 10.11.3 (15 d 21) - time since started: about 2 days
ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)
EFI (disk0s1)
: 210 MB HD (disk0s3)
[recovery] recovery: 650 MB Macintosh HD (disk 1) /: 999,01 go-go (942,10 free)
Storage of carrots: disk0s2 999.35 GB Online
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. FaceTime HD camera (built-in)
Hub keyboard Apple, Inc.
Apple Inc. Apple Keyboard
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
/ Library/Application Support/org.pqrs/Karabiner
[loading] org.pqrs.driver.Karabiner (10.15.0 - 10.11 SDK) [Support]
[loading] 157 tasks Apple
[operation] 79 tasks Apple
[loading] 191 tasks Apple
[operation] 96 tasks Apple
[loading] org.pqrs.Karabiner.load.plist [Support]
[loading] A spot of Apple
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Carabiner application (/ Applications/Karabiner.app)
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000003.Solitaire
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000007.Karabiner_AXNotifier
[ongoing] com.etresoft.EtreCheck.115232
[ongoing] org.pqrs.Karabiner.73632
Default browser: Version: 601 - SDK 10.11
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.41212.0 - SDK 10.6 [Support]
None
Time Machine not configured!
4% WindowServer
3% fontd
0% kernel_task
0% dock
0% cloudpaird
Top of page process of memory: ⓘ
3.10 GB com.apple.WebKit.WebContent (5)
698 MB kernel_task
Softwareupdated 475 MB
254 MB Solitaire
180 MB Safari
86 MB of free RAM
7.91 used GB RAM (1.03 GB being cached)
10 MB of Swap used
February 1, 2016, 14:05:24 Self test - passed
1 February 2016 13:47:18 / Library/Logs/DiagnosticReports/com.apple.WebKit.Networking_2016-02-01-134718_ [redacted].cpu_resource.diag [details]
System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.Networking.xpc/Contents/MacOS/com.apple.WebKit.Networking
Is very slow, or just web browsing? Was - this slow until you have changed the network?
-
By clicking several times for switching Applications and other problems of Click
I would like to know when it started, because then maybe I could narrow it down. I have actually some problems, but I strongly suspect that they are related. I do not think that this started immediately when I upgraded to El Capitan, but I can't say when it started.
1. If I Mail to Safari and I click on Safari to bring it forward, nothing happens. If I click a second time, then Safari comes forward. The problem is not limited to these two requests. Maps, Finder, TextEdit and others do, but it doesn't happen in all cases. For example, if I click on a TextEdit window it before now, but if TextEdit is in front, the other application is not until the second click.
2. If I double-click a file or application in the Finder, it tries to open the point three times. This usually results in two dialog boxes telling me that the application cannot be opened because the third opens.
3. I have my user folder and disk in my dock to quickly navigate to a specific folder using the grid. However, when I click on an item in the grid, the icon blinks but nothing happens and the view disappears, won't let me choose something or drilling to the location I wanted.
What I tried
A different user account - another user account, all right. It tells me that the problem is at my user account level and not at the level of the system. It's good, almost.
Connection with the elements of wide opening (SHIFT key is pressed) - This resulted in no change in the above problems.
Watch the Console - I ran the Console to see if all the messages when problems occurred. Zip fastening. Zilch. Nada.
What I think
I am sure that this is a problem with an article by third party due to the fact that it happens to other users on the same computer, but since this is not an element of connection, so I'm stumped on how to refine the problem down to find the cause.
Does anyone have any suggestions?
Okay i ' l jump to... Maybe you're more think it is a little. Have you tried another mouse or trackpad, then a reboot before going too far into other possible problems?
Maybe you are looking for
-
How can I synchronize bookmarks in Firefox on Linux with Firefox on Win7.
None. I want to make them the same, as if I had only ONE operating system on this computer.
-
When I return to the page of Google search results, need me a white screen of Google
For example, I click on a link after doing a search on Google, then I decide to go back and check onethe other links. When I return to the place to see my screen of Google results, I was whiteScreen of Google. So I put my search terms in all over wor
-
Using Firefox 20 on MacOS - when I click the button downloads or Cmd + D to bookmark a page, the browser window changes which looks like this: https://DL.dropboxusercontent.com/u/35912963/01-Firefox-before.PNGwho looks like this: https://DL.dropboxus
-
How can I manually turn on the keyboard backlight? It does not automatically lights up until the bathroom is almost completely black. There are many low-light situations where it would be nice to have the backlight on, but it's not dark enough so tha
-
Signature of the problemProblem event name: BlueScreenOS version: 6.0.6000.2.0.0.768.2Locale ID: 2057 Files helping to describe the problem (some files may be is no longer available)Mini111709 - 01.dmpSysData. XMLVersion.txt See a temporary copy of t