Recovery Manager - please help - have wim have no recovery manager

Similar Questions

• Please help have installed some updates and now the laptop won't restart

  Please help I have installed the updates windows asked what I do, restasrted my laptopp and now it won, t start up. It's show on a black screen! 0xc01a001d! 29371/56275(\Registry\machine\Schema\wcm://Microsoft...) I turned off I tried to leave again in safe mode and last good configuration and it is right on the same scene. feeling pretty desperate now any help please ASAP would be greatly appreciated TO

  my laptop is a SONY Vaio and it runs on Windows Vista Business

  Hello

  Try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If that does not resolve you would like to repost in the forum update of windows for the best help with this issue of update

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1

• HP pavilion g6: I forgot my password on it please help

  I forgot my password n get halt code on 60294506, please help have tried everything, thank you in advance...

  Hello

  Enter 75192528

  Kind regards

  DP - K

• Dreamweaver cs3 - CSS not made when opening pages - please help!

  I use Dreamweaver CS3 and have built a certain (low) sites previously so not a perfect beginner, but am totally thrown by my CSS does render does not correctly in a new site I am building.

  I've implemented a new model, all work very well, full CSS included, noticed in the browser ok.

  Then created 2 new pages from this model "Aug.html" and "Oct.html" and recorded the two - both pages contain a link to the other and both preview in the browser on their own.

  However when I click on the link on the page is, not moving no matter what page I start with, the result is the same, the new page that opens seems to forget half of the CSS, div completely and links are back to blue and underlined, everything is changed as if there is no CSS at all.

  Why does the CSS work here? I've never had this problem before, the CSS is simple, I have about 6 div contains everything, including a #wrapper. the body tags and one: links preview all fine until I click and the new page that opens loses its CSS. There is no accessibility / compatibility or upcoming issues.

  Please help - have tried a lot of different things, now I'm completely lost! I know it must be simple, but I really can't find a reason why, really need help with this.

  Thank you...

  However when I click on the link on the page is, not moving no matter what page I start with, the result is the same, the new page that opens seems to forget half of the CSS, div completely and links are back to blue and underlined, everything is changed as if there is no CSS at all.

  You need to refer to what happens when you PREVIEW a page in DW, is - that correct?  In other words, get you an overview of the page, click on the link to page B and page B will appear without the CSS - correct?  Here's why-

  Your link to the style sheet is a link to the ROOT (see the first "/"?).  When loading the B page after clicking on the link in the first page, it tells the browser to find the style sheet to "C:/2012LG_CSS.css" because the browser has NO idea where the root of the site DW is and assumes that the root in the link refers to the root of the hard drive.  Normally, you would not use relative links root, unless there is a good reason to do so-in your case, I am sure that you do not have.  Edit this link to a document a relative, i.e.

  and things work much better.

  In General, it is not a good idea to click outside any page viewed when using DW.

• I don't have recovery cd but I use a licensed version of vista and I have certificate too so please help me for this

  Please help me as I'm getting my system recovery

  Most laptops and many OEM desktop computers (HP, Sony, etc.) come with a picture of factory restore on a special partition on the hard drive. The factory restore process is normally called by pressing a key of function (such as F11) to start the computer. There will be a message as to what function key press the screen when you start your computer. You can also consult the manual of your computer or the computer mftr.'s site, or contact technical support to learn how to restore your computer if you plant from each computer mftr. He does it differently - sometimes even between models.

  These machines also generally have a utility to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. If you have not created the recovery image recovery physical and/or damaged disks, contact technical support of computer mftr. to order a set of recovery disks. It is normally very expensive, around $20-25. MS - MVP - Elephant Boy computers - don't panic!

• Please help me renew my membership - I have a lot of management design/photo to do today and no way to access the software!  I have a subscription through my school teacher and don't see any way to renew under the "regime".

  Please help me renew my membership - I have a lot of management design/photo to do today and no way to access the software!  I have a subscription through my school teacher and don't see any way to renew under the "regime".

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• I HAVE A WINDOW VISTA HOME PREMIUM... MY RECOVERY DISK CD IS LOST... PLEASE HELP ME I'M LOOKING FOR MY RECOVERY CD

  I SAW THE PROBLEM AT THE START OF THE WINDOW AND IT CRASHES ALL THE TIME...

  MY STARTUP LOADS VERY SLOWLY...
  AND ALSO, I AM UNABLE TO TURN ON WINDOWS DEFENDER. IT SHOWS THIS MESSAGE TYPE. PROBLEM WINDOW DEFENDER
  0x800106ba.kindly help me
  AND ALSO ME SAYING HOW CAN I ORDER MY MICROSOFT RECOVERY DISK... BECAUSE MY RESTORE CD IS LOST...
  PLEASE HELP ME...

  Microsoft make nor sell recovery discs, these are only available from the manufacturer of your computer, so you must check with them to see if the discs are still available.

• I think that my system of basic windows files have been changed and currupted can someone please help!

  I get major errors that led me to think my windows files have been modified and currupted I just can't install microsoft updates they download, but I'm unable to install, I'm unable to use the Disk Defragmenter and disk scan as it said my system is already in use. I am also unable to use my acer factory restore settings because it loads but never finishes running can someone please help! I am not in a position to buy or pay for a new cd of windows so that I can make a new clean instalation as I can't afford it can someone please help!

  Download of updates of work but the installation of updates arnt working
  installation of games arnt working cd - I get errors
  disk defragment simply does not work I click top but nothing happnens - perhaps sumthing to do with priviliages admin, but I am the administrator.
  Scan disk does not work as it says system is already used but works if I put it to run at reboot
  MY acer DEFAULT factory restore setting does not work it loads but never short - that led me to believe I have no control over my privliages of basic windows system, but I am the adminsitror.

  I already had major problems when WIndows would break and stops working when you start up, I managed to solve this problem in safe mode and disabling some start up programs to check the malware was eventually attached to my system using windows scanner and malwarebytes defnder, I managed, but it seems that it is undetectable.

  I am unable to afford a new cd for a new clean instalation of windows, I think I need. can someone please

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://us-store.Acer.com/RCD/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It comes to the use of the partition Recovery of Acer to restore factory settings.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  Note: During the process, all data stored on your computer will be overwritten. This means that all of your files, such as e-mail and photos, will be deleted. Therefore, we recommend making a backup of all data before starting the recovery process.

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Some manufacturers have more available Vista recovery disks.

  If this happens or the recovery Partition is damaged, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I remove the tones created in garageband that have been uninstalled? I also installed but I can't remove it either please help thanks

  How can I remove the tones created in garageband that have been uninstalled? I also installed but I can't remove it either please help thanks

  Hello Michael,

  Welcome to Apple Support communities.

  I see that you need assistance, removal of GarageBand ringtones that were uninstalled. I know it's nice to be able to properly manage your tones. I can help you with this.

  Use the article for iOS (iPad) 2.0.x GarageBand: GarageBand share songs, more precisely, this section:

  To remove the existing ringtones follow these steps:

  • Press to select, then press the button Delete for any ringtone you want to delete.

  • Drag a ringtone in the list, and then press delete.

  Have a great day!

• my firefox crashes and gives me say eror sign, Firefox cannot load your profile. may be it is removed or have not achieved.please help me

  I have a problem my firefox crashes and gives me this error, Firefox can't load your profile, it may be removed or have not reached. I tried to open the profile manager he gived me the same error
  I uninstalled firefox almoast 20 times and deleated all ISO pc files and nothing has changed, please help me.sory fore bad English.

  Thanks for the help I fixed firefox, I instaled windows pack 3 and it started working again.

• Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no dound I did a windows update, but no sound came through, please help me

  Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d

  the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song

  Thanks for any help

  Hi, Pantha9,

  What version of Windows are you using?

  Start > right click on computer and select Manage

  Select Device Manager

  Click on the + next to sound, video and game controllers

  Right-click on the driver and select uninstall

  Restart the computer and Windows will reload the driver

  New attempt of his

  Access the site of the factory and search for driver updates

• I have the product key for windows vista home basic 32-bit service pack 2 but no cd, please help me

  I have a right problem, my computer laptop need to format I have product key for windows vista home basic 32 bit service pack 2 but no cd, please help me

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have an error, missing wxmsw262u.dll and I don't know how to fix this error, please help.

  Try to find a solution to this problem and do not receive the case? I have read that I need to get the file off her recycle bin but that is empty. My PC Tools has been clean the tray for me is not that nice. I tried a recovery tool, but the file has disappeared for a long time to recover. I have the game Unreal Tournament 3 abd she needed a server crash bu patch that he would charge not because of the missing dll file. I can't play my game and I'm going to cry, I.; m 57 years and don't have a lot of time left in the world so please help me soon.

  Hello

  There is a long list of things to try to solve this problem

  you have to work your way through them

  http://pcsupport.about.com/od/findbyerrormessage/a/wxmsw262u-DLL-not-found-missing-error.htm

• Hi people I have some hard drive problems, please help :)

  Hi guys, I just bought a Sata HDD internal 2 TB, but I do not see it in 'my computer', but when I go to computer management I see, I tried to do something with it, but an error pops up, I treid deleting and creating a new partition, but just before the end, I get this error : "The operation failed to complete because the disk management console view is not updated.  Refresh the view by using the refresh task.  If the problem persists close the disk management console, then restart disk management or restart the computer. "Please help. TNX

  Did you try to restart and try again as he proposed?  Assuming that you I had two ideas.  First of all, if your system is not aware of Windows updates, I would now.  Secondly, I have had good success called Easeus Partition Master that you can download from http://easeus.com .  I see they have a page for a free version 9.1 for users running the environments of 32 and 64 bit to http://www.partition-tool.com/personal.htm .

  I hope this helps.  Good luck.

• I have a table of the adf, I added a column that contains a button that I created, when I click it must remove this row in the table, but it is not, please help

  I have a table of the adf, I added a column that contains a button that I created, when I click it must remove this row in the table, but it is not, please help

  I don't understand. You use vo and eo for you to use business components.

  Again, this kind of code call in trouble.

  You must post the changes to make them visible to the eo find vo. You must then run the query for the changes in the business layer strips then you must update the iterator he table is based on.

  In your code I see that happen, hooch maybe because it is more often than not formatted and undocumented.

  My advice is to do a small test case that you can manage with easy sql. Once you get it to run transfer you the results to the actual application.

  Timo