Recovery of 6 + failing IPhone in DFU Mode and

Similar Questions

• IPod touch 6 generation is passed in brick mode and I restored with put it in dfu mode and restored factory via itunes and it says that it has completed the restoration. And it the ipod starts up and has the apple logo and a loading bar which is st

  IPod touch 6 generation happened in brick mode and I restored it by the he output in dfu mode and restore to the factory via itunes settings and it says it has finished restoring. And the ipod starts up and has the apple logo and a loading bar that do not move and it's stuck and it's been a week and I've done this process over and over

  Hi, Slkdogg1.

  Please visit Apple support communities.

  I understand that you cannot restore your iPod touch, and it looks like it is stuck on the Apple logo with progress bar.  I would like to start by going through the steps outlined in the article below.

  The Apple logo with the bar of progression after the update or restore iPhone, iPad or iPod touch

  If this does not resolve the problem, try to go through the troubleshooting steps in the articles below.

  Solve the iOS update and restore error in iTunes

  Resolve alerts related to USB in iTunes

  See you soon

• I put my date of 01/01/1970 and my iPod 6th Gen has not worked since. I tried to put it in DFU mode and it has reset, but remains on the apple logo.

  I put my date of January 1, 1970 and as soon as I rebooted my iPod (6th generation) he never returned to my home screen, but instead, he stayed on the apple logo. I tried to drain the battery, but he always did. I even connected it to my computer and put it in DFU mode to reset, but it froze at a very small percentage of loading and no progress has been made.

  Given that the DFU mode does not work, then

  If you have this problem,contact Apple technical support.

  If you have changed the date of May 1970 or earlier and cannot restart your iPhone, iPad or iPod touch - Apple Support

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• An iPhone can be restored in DFU mode without password iCloud?

  I lost my phone yesterday and I'm not sure what is there a chance that my iPhone can be restored completely and remove all iCloud by immersion in DFU mode settings? I block now and he is waiting to be lost mode, but an iPhone find anyway possible (as the DFU mode and recovery) before lost mode participated in? Furthermore, I use iPhone 5 with ios 9.2.1. Thanks for your time.

  You can remove lock activation by entering the password.

• My iPod is stuck in Recovery/DFU mode

  My iPod is stuck in recovery/DFU mode. He is stuck with the apple logo and a progress bar which is of about 1/20 of the way along. If I connect it to my computer it does not appear in iTunes or in my computer. If I try to restart of Force as suggested in this article:https://support.apple.com/en-gb/HT201263 , then it will display the logo of low battery. If I connect it to my computer, it loads and goes back to being stuck with an Apple logo and a progress bar. Any ideas on how I can fix this?

  While similar DFU mode and recovery mode are different. Try the other method and then try to rebuild through iiTunes

  Try DFU mode, then restore to factory settings / new iPod via iTunes

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  Recovery mode

  Next

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• iPhone is stuck in DFU mode

  Hi all

  I had a hardware problem on my iPhone (charger cannot charge), so I tried to reset my iPhone to send to warranty. The thing is I followed a tutorial on how to reset an iPhone and he told me to put it in DFU mode, I did.

  But now, the iPhone has been slain on the Apple logo with the below empty progress bar... When I connect it to iTunes (very difficult due to my problem of original material), he ordered me to enter my PIN, but she is not asked on the iPhone, I can't get anywhere.

  I can't get out of DFU mode either...

  What can I do? I just reset my phone anyway...

  Thank you very much in advance!

  Renaud.

  Have you tried using the recovery mode? This is different from DFU mode. Take a peek inside.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

  For later use, you don't have to put the phone in DFU mode in order to erase it if you ship it service.

  Prepare your iPhone, iPad or iPod touch for the service - Apple Support

• iPhone 4 crashed, has entered into recovery mode and don't update or restore (error 4013)

  Hi all

  So, the other day, while watching a YouTube video, my iPhone 4 became unresponsive and turns off. Since then, he has been slain in recovery mode, only showing the "connect to iTunes screen.

  iTunes gives me two options: update or restore. As I wanted to save my data (I have been so sloppy as to not have backed up the device for about a year!) I tried to update a bunch of times. However, it keeps me gives error 4013. Then, having given up this possibility, I also tried to restore the device several times, but unfortunately exactly the same phenomenon occurs.

  What happens is: iTunes downloads and extract the software, says "waiting for iPhone" for a few seconds, then it said "Preparing iPhone software update" because I think little about exactly 15 minutes. Then he said "Waiting for iPhone" still for a few seconds, after which it gives me error 4013.

  My guess is the iPhone automatically leaves the recovery mode so that it gives me this error because after 15 minutes and restarts alone, leaving iTunes to "think" that there is some kind of connection problem or do not recognize the device as being the same when it turns off and turns back on after 15 minutes. If this is the case, perhaps restarting interrupts the update/restore process. Or maybe just crashes in this state of preparation for 15 minutes because he is unable to do what he needs because of a sort of damaging the material.

  What I've tried so far:

  -Update iTunes to the latest version (12.2.2)

  -Updated the software on my Mac (although I must say that it is an old MacBook with OS X 10.7.5; I don't know if it's any factor here)

  -Restarting my computer

  -Switch to the other USB port

  -Using another USB cable (although the one alternative that I have is not in very good condition)

  -Try on a friend's computer (a much newer MacBook; I don't know what operating system well)

  -Force the device to restart a package of time (now the power and the home buttons)

  -A few third-party applications that claim to be able to get the iPhone out of recovery mode

  Any of you have ideas, ideas or suggestions on what is the cause and how can I get my phone back to life again? Recover my data would be obviously ideal, but I would also be very happy with just equipped with a device of work once again. I know it's an obsolete phone but it has always worked well.

  Thank you in advance for your help!

  Anyone? I could really use some help. Thank you!

• IPod 160 GB Classic is stuck on the apple logo. I have reset several times and I can not put in DFU mode or resets it to take. Done all the help topics that I have seen here and nada... Please help

  help me get the apple logo take off. I reset it, tried and failed to reset. I can't put it in dfu mode. I'm stuck and need help pease. I did everything that was mentioned in other posts similar to this issue.

  That may mean the iPod has a hardware problem, such as a faulty hard drive or the logic board.

  When you do a Reset (press and hold the Menu and Center buttons), going blank at the start before the Apple logo returns the screen to the iPod?  Or do you mean that the Apple logo is 'stuck' and it doesn't go away when you try of the reset?

  Is the "DFU mode" procedure for disc Mode.  Have a look here to confirm that this is what you have tried

  How to put your iPod in disc - Apple Support mode

• IPod touch 2nd generation, cannot start the dfu mode

  Hello!

  I have a 2nd generation Ipod which is is disabled because of lost password. So I know no more iOS type.

  The problem is that I can't open the dfu mode even if I tried "all" solutions that the web has to offer.

  Whenever I have connect the ipod to the pc, Itunes response is "Itunes can not connect to the device because it is locked. "You need to type the code before it can connect to iTunes."

  I tried the approach that Apple recommended but it does not work. The final solution, I tried was to download recboot and see if I could activate this way dfu mode, but only has not to be helped.

  Turn off the iPod Touch. Press in and hold the home button while connecting to iTunes, make sure that you press and hold the home button before you connect and keep holding until you see the recovery screen, must look like the one below. Once to this iTunes screen should warn you that it detects an iPod in recovery mode and needs to restore. Now, just click on restore and iTunes will restore the iPod touch, no code necessary. I hope this has helped!

  

• Vista could not start in normal mode and the relocation of scores of hidden factory settings also failed.

  NOTE: THE PROBLEM WAS MY POWER SUPPLY WAS LOW, NEW POWER ADAPT SOLVED MY PROBLEM.   Read more if you are interested in what happened prior to my tent a different power adapter.

  Original title: vista 32 does not start

  After a reboot could enter the mode safe mode with internet connection.  able to restore good boot known beforehand.  But what normal start attempt would not start completely.  tried to reinstall from hidden factory partition.  07:34 minutes, the installation progessed.  then the machine stop.  When you restart get the message "error during installation, restart the computer, and then restart the installation."  When you try to start in safe mode, get error ' cannot install frrom SafeMode ".". "  I have no bootable cd.  to know about a 'platform of recovery' still tells CD also cannot install from this cd.   can I boot from a "devils of recovery" in safe mode and use the hidden partition to reinstall to factory settings as I tried the first time?  or do I need a full installation CD to get the machine to boot?   My question is should I at this stage of start-up during installation seems to have failed?

  as for what caused this problem?  I recently gave a USB external hard drive, but had not written for her.  did a chkdsk of the external hard disk without error.   When the problem was first happening, I removed the battery and the power cord of the acer laptop then pressed the power for 30 seconds to perform all memory the power button.  He got rid of a problem that I had been meet in which received start-up error message not "adapter acer". with battery removed, laptop power problems have disappeared.

  as the system is now, when I try to start everything now alt F10, I get a screen that reads "change windows startup options for: microsoft windows vista ' ' path: \windows\system32\winload.exe" "partition: 2" "HDD;". " d404533e' "[/ noexecute = optin /deteecthal]"

  When I press ESC the next screen "windows boot manager" bed "choose an operating system to stat, or press TAB to select a tool:

  Microsoft windows Vista (single choice)

  "to specify an option fo this choice, press F8."

  "Tools:

  "windows memory diagnostic"

  (diagnosis of memory showed no problem) by pressing TAB toggles between Vista and the diagnosis.

  I tried to boot with external USB hard drive connected and not connected.   the touch pointer was not working, but was erratic.   Sometimes, I could use a USB wireless mouse when it is started in safe mode.   recently the media player would not charge unless I restarted.  (before the system does not at all which is the theme of this original problem).

  When I try to start using f10, I get a screen that seems to ask for entry. the cursor is held after the detecthal of the line as below. What could of entry to enter the boot to continue?

  Winload.exe

  / noexecute = optin /detecthal

  me. surprised... the problem was that my power supply was low.   the adapter provided enough power for the laptop, most of the time.  but sometimes for laptop needs more power that the adapter could supply... so the laptop would be closed.   When I tried a different power adapter in a store, the fully charged laptop and my problem was solved.  lost a lot of time because I didn't know that the power supply was the problem!

• Statrted of Vista in safe mode and systm recovery restores and no recoverydisk not found?

  Statrted of Vista in safe mode and systm recovery restores and no recoverydisk not found? Sys restore is off and will not turn on and due to safemode noting els / programs will not work. is there a way out?

  Hi Jeff,

  1. you receive messages or error codes?

  2. did you of recent changes on the system?

  If you are able to boot into safe mode without any problem, you can try to perform a clean boot and check if it helps.

  Method 1:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  If you are always faced with the question, then you can check if you can start your computer by using the known last good Configuration feature and fix the problem.

  You can read the following article to do the same thing:

  Using the last good known Configuration

  Method 3:

  If the steps above fail, then you must have a full version of Windows Vista disk and try to perform a repair of the boot to WinRE (Windows Recovery Environment) boot from the installation disc.

  If restarting fails, then try to perform a restore of the system to WinRE (Windows Recovery Environment).

  For more information, you can consult the following article:

  What are the system recovery options in Windows Vista?

• Question of DFU mode

  Is there a difference between a new phone and a new phone that has been restored or updated via DFU mode?

  Yes.  One is new.  The other is the kind of news, but not quite.

• iPhone 6 & Landscape Mode

  Aloha,

  No matter what I do, I can't get my iPhone 6 for work in landscape mode. For example, I opened a video in normal mode, and then switch to full screen and then try to turn the phone to display in the landscape, but the iPhone 6 do not return full landscape mode. I have the same thing to the text, or whatever it is.

  I forced a re-startup of the phone. What can I do?

  Maybe I'll be forced to restore the factory settings, but then I have to re install all the applications, which would be a pain.

  Mahalo,

  Johnny

  If you want to try to restore "Reset all settings" it will not erase all user data

  iPhone 6 supports the fashion landscape in Home Screen as 6 more

  If get you stuck it Landscape Mode better to DISABLE failover lock & it will fix this problem

• Had to crash my computer. Lost my recovery key. My iphone have paired with the previous installation. is it possible to recover the data?

  In order to upgrade my Windows xp computer to Windows 7, I lost access to firefox without thinking to generate a recovery key. Is it possible to recover my data?

  If the only thing you have coupled to the account is an iPhone response is that unfortunately not. Customer iPhone (Firefox Home) is just a 'consumer' of data Sync and can't do much.

  My best advice is to keep sync iPhone to access bookmarks and transfer it manually to your new profile.

  Sorry to be the bearer of bad news.