Recovery of password on the vpn concentrator 3000 4.0 running above

Similar Questions

• Connection VPN concentrator 3000 problem

  Hi all

  I hope that u all experts will be able to help me through this time thick. Our VPN 3000 Concentrator admin password has been changed by someone in order to reset the password using directly by serial cable, now the problem is it allows me to connect with admin console but not via the web administration or telnet interface. I have activated access telnet and http, but always without success. Concentrator uses the internal database so no AAA server is configured.

  Can someone help me please thanks to this?

  Kind regards

  The console password should be the same as the telnet and HTTP password.

  The problem doesn't seem to be on the password.

  Please check under: Administration--> access--> access control list--> and check if your IP is in the list. If this isn't the case, please add your IP address/subnet to the list for you HTTP access to the VPN concentrator.

• Configuration file for the VPN concentrator

  Hello

  I have a text-based VPN concentrator configuration file, and I want to know if there is a configuration guide of Concentrator VPN that I can use to refer to this file. The configuration on cisco.com guide is currently for the GUI based configuration.

  Furthermore, if there is a tool/utility that will read the configuration file in the format GUI without physical access to the device, which will also help.

  Thanks in advance for any assistance.

  There is a "XML export screen" in the management section of the files on the VPN concentrator. You can export the current configuration of the concentrator in a XML format, which provides the labels and values for the fields in the configuration file.

  http://www.Cisco.com/en/us/docs/security/vpn3000/vpn3000_47/Administration/Guide/Fileman.html#wpxref53361

• Recovery of password on the C/SX Series (No. PWREC)

  Hi all

  Is it possible to reset the password of admin on C/SX series TC6.x and TC7.x?

  I know that 'PWREC' user can reset admin password.

  But it puts not only admin password, but unfortunately also all the configuration (= factory-reset).

  In addition, SX20 is not any console port, so if you forget the SX20 admin password, which means, all we can do is factory reset.

  (no root for TC7.x account now)

  Best regards

  Kotaro

  1. The recovery of password PWREC user has been deleted because of security considerations. There is no way to recover the password, if it is lost the system must be factory reset. If physical factory reset is not possible, it can be done via the web interface. It is also possible to connect through the series as a user of reset.
  2. Connect the cable series on the system at 38400, 8, N-1
  3. Restart the system
  4. Sign in with the user "factoryreset. This user is available just a short period of time after the reboot (it is still available in TC6). When connect with this user, it is possible to make a systemunit of xcommand FactoryReset confirm: Yes.
  5. Do a reset: 'Xcom boot.
  6. The system is factory reset.

  If the root account is activated in TC 6.X, we can change the password using the command "userdb setpassword admin . We cannot use this procedure 7.x from

  Thank you

  Deva G

• What has replaced the vpn concentrator?

  Greenhorn here, I was not to sit in this place.  We have three remote sites, sister of institutions, we share an app with.  Host us the app.  A site has a configuration of vpn concentrator, the other two use a leased from point to point line. They each have a router that connects to a single router.  They want to replace the lines leased by using a vpn.  Do the digging, I see that the hubs are EOL.

  So, what is used to replace the hub today?  What is a solution today from leased lines? They are all poor profit. My guess is that they will say look on Ebay for a hub if the solution is too expensive.

  Thanks Jim

  Jim

  The package of security (CISCO2901-SEC/K9 or CISCO2921-SEC/K9) is the convenient way to get the combination of the router, the software and licenses you will need. I don't think that you need something more elaborate than one of these security packages.

  I think one of these would be a good choice for you. It's been a while since I looked at the details of these routers. My recollection is that the 2921 offers more power, more interfaces and a few other benefits and would be attractive to many of us. But I think I understand your needs, I believe that the 2901 router cheaper and quite adequate for you.

  HTH

  Rick

• I want the password protect the VPN toggles

  IM aiming to put a lock on the VPN code switches as a means of Internet security. So far, using a VPN internet filter was the best method of filtering * sites because the restriction in iOS setting is either

  (1) too broad - the parameter filters too many sites that are not 'bad' according to my criteria and Internet which uses a hassle or

  (2) not wide enough and inefficient - if I have to enter each unique web address, that I want to block by hand, I'll never be able to get all of them.

  OpenDNS umbrella VPN is inexpensive ($20 years OLD!), relatively fast, be online most of the time and is effective. The only problem is, as many have said, Apple provides no way to get the VPN settings.

  Jailbreaking would provide tweaks to do this, but I don't want to go this way (although I feel that apple encourages this line).

  I looked in other methods, like the Ciscos Maraki new mobile device management. As a professional IT Tech. tool, maybe it's the best option, but it is not always easy for a novice to networking semi guy like me to understand.

  Fundamentally, I believe that Apple needs to work on its policy of the device settings. They need develop a control system easy to use and easy to use. Families and small businesses are ever needing management tools complete device for all levels of mobile devices. access to the network, access app, followed by the app, ext.

  I want to control and monitor the use of my family, it's so dangerous content out there and new ways to hide profane and damaging activities opens too quickly for an individual to find ways to control us needed tools to help us.

  Submit your Apple here:

  http://www.Apple.com/feedback

• How to start the VPN connection when windows is running

  Original title: trouble with automatically the VPN connection

  Hi, I want to have my VPN connection to start automatically when windows is running.

  Simple version:
  I tried various different methods, including; Paste the shortcut in the startup folder and adding the task in the Task Scheduler.

  I have the same problems with both methods. Just the VPN starts automatically... I have to run it manually whenever I turn on the computer or wake up sleep mode.
  Does anyone know other methods finally a solution for the other two methods?
  In the version of the depth of the problems:

  Method of Task Scheduler: I get argument is not valid, it is even after I have successfully created the task and click OK. The task will not work, and also by some strange reason, my VPN password is not get recorded on my connection more. So now, I need to manually start the connection and type in the password. (I click on save the password whenever this does not work, when the task is active...)

  Shortcut to the startup directory: Simple and easy... It simply doesn't get it. I followed the steps very carefully and I'm 100% sure that I did it the right way...

  These links have good information on how to open a VPN connection to the Windows dΘmarrage

  http://www.dariancabot.com/2010/11/15/automatically-connect-to-VPN-at-Windows-startup/

  http://www.Buchatech.com/2011/04/configure-Windows-to-automatically-connect-to-VPN/

• Change the password for the Active Directory account that is running VMware VirtualCenter Server

  We have an ESXi5.5 environment and I was instructed to change the password of the Active Directory account is used to run the VMware VirtualCenter Server Service.

  There is a Data Source configured for a separate MS - SQL Server that is configured to use Windows authentication

  I find the Article KB KB VMware: changing the vCenter Server database user ID and password

  On the key: KEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc., \VMware VirtualCenter\DB T HE for 2 and 3 values are empty

  It is not quite clear to me if the vpxd.exe Pei command is necessary for our environment (service AD account and Windows authentication) or if it is only if SQL authentication is defined on the Data Source - would anyone have experience with this change and be able to clarify for me?

  Thank you

  Yes you are right,

  but I would suggest to stop the services first before you do the activity, it can take the old password in a few times and lock the conduit to account

  2. once the password is updated, make sure that the login account is updated (is currently running services on the specified user account or local account?)

  If it runs using the specified account, you will need to updated and restart the services.

  3. make sure that the services are running fine and observe for a while, the user account must not get locked.

  Let me know if you have any other questions

• configuration VPN concentrator 3000 backup

  Hello

  Can someone tell me how can I take backup of my Cisco VPN 3000 series concentrator configuration?

  in GUI and command mode?

  I couldn't find any good document describing.

  Here is the link on how to Backup/restore configs and work with the file system.

  http://www.Cisco.com/en/us/docs/security/vpn3000/vpn3000_47/Administration/Guide/Fileman.html

• Recovery of password for the mail Client

  How can I recover my password to my Gmail account Outlook, Outlook Express, Exchange, Mail, etc. I forgot, and given that my clients receive my gmail, google refuse to believe that I have no problem.

  Where you go, if you want your gmail password you will need to verify that you are the owner.  Gmail is the best place to start.  I don't know that they have validation of property as Microsoft has here.

• Recovery of password on the new computer

  I just got a new 10 "laptop Toshiba and was tired when I typed in privacy.  I have the idea and know what the password should be... but he won't let me little matter what I do.  I tried caps, I tried to upper and lower case... tried almost everything.  It's only the second time I used the new computer and it won't let me.  What can I do to reset the password.  Well Yes... you guessed it... I don't have a backup disk.  Help!

  Since this is a brand new computer, just do a factory restore. You don't have anything about it at this stage and it will be less work to do the restore to factory to try and reset the password. MS - MVP - Elephant Boy computers - don't panic!

• VPN concentrator 3000

  I have a small question, I have a backup ACS server which was built just now, I noticed on my hub under Config-online system-online servers = > authentication, I have the primary server for authentication in place, the question is do I add the server to backup ACS as well so if the primary goes it will automatically use the ACS server? Thank you in advance!

  This is how its supposed to work. Given that you have not set up a group of authentication servers list.

  Kind regards

  Prem

  Please rate if this can help!

• Simultaneous connections to the VPN concentrator

  Hello

  The documents indicate that the "concurrent connections" applies for a user unique "in-house".

  I set up a group of users who use RADIUS as an authentication method. Wondered if the simultaneous connection can be applied as well.

  SO what I'm trying to do here, is to let the user to authenticate via RADIUS. I want to restrict only 1 session / username at the same time.

  Any ideas?

  If you can't do, what are the available workaround solutions?

  JEM,

  Correction,

  If you have set up a simultaneous connection "1" group, then all users in the group will be able to connect (1 simultaneous connection by UID).

  Kind regards

  ~ JG

• aid required for the image backup vpn concentrator

  Hi, I am unable to download the vpn concentrator ios image to the tftp server. is someone can pls tell me what is the procedure for that. I can't find good documentation on it. pls help someone.

  concerning

  Assane

  Assane,

  You try to save the image of the hub to the VPN concentrator. Like the 4.7.2.D or the version E or F of the code. If this is the case, it is not possible to copy the image file from the hub to the tftp server.

  You must download the CEC file.

  He had an answer to your question earlier, but it pointed you on how to make a backup of your CONFIGURATION file.

  If this answers your question, feel free to write it down.

• problem of traffic flow with tunnel created the network with a tunnel to a VPN concentrator

  Hi, I worked with Cisco and the seller for 2 weeks on this.II am hoping that what we are witnessing will ring a Bell with someone.

  Some basic information:

  I work at a seller who needs from one site to the other tunnel.  There are currently 1 site to another with the seller using a Juniper SSG, which works without incident in my system.  I'm transitioning to routers Cisco 2811 and put in place a new tunnel with the seller for the 2800 uses a different public ip address in my address range.  So my network has 2 tunnels with the provider that uses a Cisco VPN concentrator.  The hosts behind the tunnel use 20x.x.x.x public IP addresses.

  My Cisco router will create a tunnel, but I can't not to hosts on the network of the provider through the Cisco 2811, but I can't get through the tunnel of Juniper.  The seller sees my packages and provider host meets them and sends them to the tunnel.  They never reach the external interface on my Cisco router.

  I'm from the external interface so that my endpoint and the peers are the same IP address.  (note, I tried to do a static NAT and have an address of tunnel and my different host to the same result.)  Cisco has confirmed that I do have 2 addresses different and this configuration was a success with the creation of another successful tunnels toa different network.)

  I tested this configuration on a network of transit area before moving the router to the production network and my Cisco 2811 has managed to create the tunnel and ping the inside host.  Once we moved the router at camp, we can no longer ping on the host behind the seller tunnel.   The seller assured me that the tunnel setting is exactly the same, and he sees his host to send traffic to the tunnel.  The seller seems well versed with the VPN concentrator and manages connections for many customers successfully.

  The seller has a second VPN concentrator on a separate network and I can connect to this VPN concentrator with success of the Cisco 2811 who is having problems with the hub, which has also a tunnel with Gin.

  Here is what we have done so far:

  (1) confirm the config with the help of Cisco 2811.  The tunnel is up.  SH cyrpto ipa wristwatch tunnel upward.
  (2) turn on Nat - T side of the tunnel VPN landscapers
  (3) confirm that the traffic flows properly a tunnel on another network (which would indicate that the Cisco config is ok)
  (4) successfully, tunnel and reach a different configuration hosting
  (5) to confirm all the settings of tunnel with the seller
  (6) the seller confirmed that his side host has no way and that it points to the default gateway
  (7) to rebuild the tunnel from scratch
  8) confirm with our ISP that no way divert traffic elsewhere.  My gateway lSP sees my directly connected external address.
  (9) confirm that the ACL matches with the seller
  (10) I can't get the Juniper because he is in production and in constant use

  Is there a known issue with the help of a VPN concentrator to connect to 2 tunnels on the same 28 network range?

  Options or ideas are welcome.  I had countless sessions with Cisco webex, but do not have access to the hub of the seller.  I can forward suggestions.

  Here's a code

  crypto ISAKMP policy 1
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 2
  BA 3des
  preshared authentication
  Group 2

  Crypto ipsec transform-set mytrans aes - esp esp-sha-hmac

  Crypto-map dynamic dynmap 30
  Set transform-set RIGHT

  ISAKMP crypto key address No.-xauth

  interface FastEthernet0/0
  Description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE $ 0/0
  IP 255.255.255.240
  IP access-group 107 to
  IP access-group out 106
  NAT outside IP
  IP virtual-reassembly
  route IP cache flow
  automatic duplex
  automatic speed
  crypto mymap map

  logging of access lists (applied outside to get an idea of what will happen.  No esp traffic happens, he has never hits)

  allowed access list 106 esp host host newspaper
  106 ip access list allow a whole
  allowed access list 107 esp host host Journal
  access-list 107 permit ip host host Journal

  access-list 107 permit ip host host Journal
  107 ip access list allow a whole

  Crypto isa HS her
  IPv4 Crypto ISAKMP Security Association
  status of DST CBC State conn-id slot
    QM_IDLE ASSETS 0 1010

  "Mymap" ipsec-isakmp crypto map 1
  Peer =.
  Extend the 116 IP access list
  access - list 116 permit ip host host (which is a public IP address))
  Current counterpart:
  Life safety association: 4608000 kilobytes / 2800 seconds
  PFS (Y/N): N
  Transform sets = {}
  myTrans,
  }

  OK - so I have messed around the lab for 20 minutes and came up with the below (ip are IP test:-)

  (4) ip nat pool crypto-nat 10.1.1.1 10.1.1.1 prefix length 30 <> it comes to the new address of NAT

  !
  (1) ip nat inside source list 102 interface FastEthernet0/0 overload <> it comes to the interface by default NAT

  !
  IP nat inside source map route overload of crypto-nat of crypto-nat pool <> it is the policy of the NAT function

  !

  (6) access-list 101 permit ip 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255 <> defines the IP source and destination traffic

  !

  (2) access-list 102 deny ip 172.16.1.0 0.0.0.255 172.16.2.0 0.0.0.255 <> does not NAT the normal communication

  (3) access-list 102 deny ip 10.1.1.1 host 172.16.2.0 0.0.0.255 <> does not re - NAT NAT

  (1) access-list 102 permit ip 172.16.1.0 0.0.0.255 any <> allows everyone else to use the IP Address of the interface for NAT

  !

  (5) crypto-nat route-map permit 5 <> condition for the specific required NAT
  corresponds to the IP 101 <> game of traffic source and destination IP must be NAT'td

  (7) access list 103 permit ip 10.1.1.1 host 172.16.2.0 0.0.0.255 <> crypto acl

  Then, how the works above, when a package with the what IP 172.16.1.0/24 source wants to leave the router to connect to google, say the source will change to IP interface (1).  When 172.16.1.0/24 wants to talk to172.16.2.0/24, it does not get translated (2).  When the remote end traffic equaled the following clause of NAT - the already NAT'td IP will not be affected again (3) when a host 172.16.1.0/24 wants to communicate with 172.16.2.20/24 we need a NAT NAT specific pool is required (4).  We must define a method of specific traffic to apply the NAT with a roadmap (5) which applies only when the specific traffic (6), then simply define the interesting traffic to the VPN to initiate and enable comms (7) corresponding